2 * linux/arch/arm/mach-omap2/irq.c
4 * Interrupt handler for OMAP2 boards.
6 * Copyright (C) 2005 Nokia Corporation
7 * Author: Paul Mundt <paul.mundt@nokia.com>
9 * This file is subject to the terms and conditions of the GNU General Public
10 * License. See the file "COPYING" in the main directory of this archive
13 #include <linux/kernel.h>
14 #include <linux/init.h>
15 #include <linux/interrupt.h>
17 #include <mach/hardware.h>
18 #include <asm/mach/irq.h>
21 /* selected INTC register offsets */
23 #define INTC_REVISION 0x0000
24 #define INTC_SYSCONFIG 0x0010
25 #define INTC_SYSSTATUS 0x0014
26 #define INTC_SIR 0x0040
27 #define INTC_CONTROL 0x0048
28 #define INTC_MIR_CLEAR0 0x0088
29 #define INTC_MIR_SET0 0x008c
30 #define INTC_PENDING_IRQ0 0x0098
32 /* Number of IRQ state bits in each MIR register */
33 #define IRQ_BITS_PER_REG 32
36 * OMAP2 has a number of different interrupt controllers, each interrupt
37 * controller is identified as its own "bank". Register definitions are
38 * fairly consistent for each bank, but not all registers are implemented
39 * for each bank.. when in doubt, consult the TRM.
41 static struct omap_irq_bank {
42 void __iomem *base_reg;
44 } __attribute__ ((aligned(4))) irq_banks[] = {
52 /* INTC bank register get/set */
54 static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
56 __raw_writel(val, bank->base_reg + reg);
59 static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg)
61 return __raw_readl(bank->base_reg + reg);
64 static int previous_irq;
67 * On 34xx we can get occasional spurious interrupts if the ack from
68 * an interrupt handler does not get posted before we unmask. Warn about
69 * the interrupt handlers that need to flush posted writes.
71 static int omap_check_spurious(unsigned int irq)
75 sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR);
79 printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush "
80 "posted write for irq %i\n",
81 irq, sir, previous_irq);
88 /* XXX: FIQ and additional INTC support (only MPU at the moment) */
89 static void omap_ack_irq(unsigned int irq)
91 intc_bank_write_reg(0x1, &irq_banks[0], INTC_CONTROL);
94 static void omap_mask_irq(unsigned int irq)
96 int offset = irq & (~(IRQ_BITS_PER_REG - 1));
98 if (cpu_is_omap34xx()) {
102 * INT_34XX_GPT12_IRQ is also the spurious irq. Maybe because
103 * it is the highest irq number?
105 if (irq == INT_34XX_GPT12_IRQ)
106 spurious = omap_check_spurious(irq);
112 irq &= (IRQ_BITS_PER_REG - 1);
114 intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_SET0 + offset);
117 static void omap_unmask_irq(unsigned int irq)
119 int offset = irq & (~(IRQ_BITS_PER_REG - 1));
121 irq &= (IRQ_BITS_PER_REG - 1);
123 intc_bank_write_reg(1 << irq, &irq_banks[0], INTC_MIR_CLEAR0 + offset);
126 static void omap_mask_ack_irq(unsigned int irq)
132 static struct irq_chip omap_irq_chip = {
134 .ack = omap_mask_ack_irq,
135 .mask = omap_mask_irq,
136 .unmask = omap_unmask_irq,
137 .disable = omap_mask_irq,
140 static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank)
144 tmp = intc_bank_read_reg(bank, INTC_REVISION) & 0xff;
145 printk(KERN_INFO "IRQ: Found an INTC at 0x%p "
146 "(revision %ld.%ld) with %d interrupts\n",
147 bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs);
149 tmp = intc_bank_read_reg(bank, INTC_SYSCONFIG);
150 tmp |= 1 << 1; /* soft reset */
151 intc_bank_write_reg(tmp, bank, INTC_SYSCONFIG);
153 while (!(intc_bank_read_reg(bank, INTC_SYSSTATUS) & 0x1))
154 /* Wait for reset to complete */;
156 /* Enable autoidle */
157 intc_bank_write_reg(1 << 0, bank, INTC_SYSCONFIG);
160 void __init omap_init_irq(void)
162 unsigned long nr_of_irqs = 0;
163 unsigned int nr_banks = 0;
166 for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
167 struct omap_irq_bank *bank = irq_banks + i;
169 if (cpu_is_omap24xx())
170 bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE);
171 else if (cpu_is_omap34xx())
172 bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE);
174 omap_irq_bank_init_one(bank);
176 nr_of_irqs += bank->nr_irqs;
180 printk(KERN_INFO "Total of %ld interrupts on %d active controller%s\n",
181 nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : "");
183 for (i = 0; i < nr_of_irqs; i++) {
184 set_irq_chip(i, &omap_irq_chip);
185 set_irq_handler(i, handle_level_irq);
186 set_irq_flags(i, IRQF_VALID);