2 * arch/arm/plat-omap/include/mach/board.h
4 * Information structures for board-specific data
6 * Copyright (C) 2004 Nokia Corporation
7 * Written by Juha Yrjölä <juha.yrjola@nokia.com>
13 #include <linux/types.h>
15 #include <mach/gpio-switch.h>
17 /* Different peripheral ids */
18 #define OMAP_TAG_CLOCK 0x4f01
19 #define OMAP_TAG_SERIAL_CONSOLE 0x4f03
20 #define OMAP_TAG_LCD 0x4f05
21 #define OMAP_TAG_GPIO_SWITCH 0x4f06
22 #define OMAP_TAG_UART 0x4f07
23 #define OMAP_TAG_FBMEM 0x4f08
24 #define OMAP_TAG_STI_CONSOLE 0x4f09
25 #define OMAP_TAG_CAMERA_SENSOR 0x4f0a
26 #define OMAP_TAG_PARTITION 0x4f0b
27 #define OMAP_TAG_TEA5761 0x4f10
28 #define OMAP_TAG_TMP105 0x4f11
30 #define OMAP_TAG_BOOT_REASON 0x4f80
31 #define OMAP_TAG_FLASH_PART_STR 0x4f81
32 #define OMAP_TAG_VERSION_STR 0x4f82
34 struct omap_clock_config {
35 /* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
39 struct omap_serial_console_config {
44 struct omap_sti_console_config {
49 struct omap_usb_config {
50 /* Configure drivers according to the connectors on your board:
51 * - "A" connector (rectagular)
52 * ... for host/OHCI use, set "register_host".
53 * - "B" connector (squarish) or "Mini-B"
54 * ... for device/gadget use, set "register_dev".
55 * - "Mini-AB" connector (very similar to Mini-B)
56 * ... for OTG use as device OR host, initialize "otg"
58 unsigned register_host:1;
59 unsigned register_dev:1;
60 u8 otg; /* port number, 1-based: usb1 == 2 */
64 /* implicitly true if otg: host supports remote wakeup? */
67 /* signaling pins used to talk to transceiver on usbN:
69 * 2 == usb0-only, using internal transceiver
70 * 3 == 3 wire bidirectional
71 * 4 == 4 wire bidirectional
72 * 6 == 6 wire unidirectional (or TLL)
77 struct omap_lcd_config {
86 struct omap_backlight_config {
87 int default_intensity;
88 int (*set_power)(struct device *dev, int state);
89 int (*check_fb)(struct fb_info *fb);
92 struct omap_fbmem_config {
97 struct omap_pwm_led_platform_data {
101 void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
104 /* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */
105 struct omap_gpio_switch_config {
110 unsigned int key_code:24; /* Linux key code */
113 struct omap_uart_config {
114 /* Bit field of UARTs present; bit 0 --> UART1 */
115 unsigned int enabled_uarts;
118 struct omap_tea5761_config {
122 /* This cannot be passed from the bootloader */
123 struct omap_tmp105_config {
125 int (* set_power)(int enable);
128 struct omap_partition_config {
132 /* same as in include/linux/mtd/partitions.h */
133 unsigned int mask_flags;
136 struct omap_flash_part_str_config {
140 struct omap_boot_reason_config {
144 struct omap_version_config {
149 struct omap_board_config_entry {
155 struct omap_board_config_kernel {
160 extern const void *__omap_get_config(u16 tag, size_t len, int nr);
162 #define omap_get_config(tag, type) \
163 ((const type *) __omap_get_config((tag), sizeof(type), 0))
164 #define omap_get_nr_config(tag, type, nr) \
165 ((const type *) __omap_get_config((tag), sizeof(type), (nr)))
167 extern const void *omap_get_var_config(u16 tag, size_t *len);
169 extern struct omap_board_config_kernel *omap_board_config;
170 extern int omap_board_config_size;
173 /* for TI reference platforms sharing the same debug card */
174 extern int debug_card_init(u32 addr, unsigned gpio);