2 * File: arch/blackfin/mach-bf518/boards/ezbrd.c
3 * Based on: arch/blackfin/mach-bf527/boards/ezbrd.c
4 * Author: Bryan Wu <cooloney@kernel.org>
10 * Copyright 2005 National ICT Australia (NICTA)
11 * Copyright 2004-2008 Analog Devices Inc.
13 * Bugs: Enter bugs at http://blackfin.uclinux.org/
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or
18 * (at your option) any later version.
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, see the file COPYING, or write
27 * to the Free Software Foundation, Inc.,
28 * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
31 #include <linux/device.h>
32 #include <linux/platform_device.h>
33 #include <linux/mtd/mtd.h>
34 #include <linux/mtd/partitions.h>
35 #include <linux/mtd/physmap.h>
36 #include <linux/spi/spi.h>
37 #include <linux/spi/flash.h>
39 #include <linux/i2c.h>
40 #include <linux/irq.h>
41 #include <linux/interrupt.h>
43 #include <asm/bfin5xx_spi.h>
44 #include <asm/reboot.h>
45 #include <asm/portmux.h>
47 #include <asm/bfin_sdh.h>
48 #include <linux/spi/ad7877.h>
52 * Name the Board for the /proc/cpuinfo
54 const char bfin_board_name[] = "ADI BF518F-EZBRD";
57 * Driver needs to know address, irq and flag pin.
60 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
61 static struct mtd_partition ezbrd_partitions[] = {
63 .name = "bootloader(nor)",
67 .name = "linux kernel(nor)",
69 .offset = MTDPART_OFS_APPEND,
71 .name = "file system(nor)",
72 .size = MTDPART_SIZ_FULL,
73 .offset = MTDPART_OFS_APPEND,
77 static struct physmap_flash_data ezbrd_flash_data = {
79 .parts = ezbrd_partitions,
80 .nr_parts = ARRAY_SIZE(ezbrd_partitions),
83 static struct resource ezbrd_flash_resource = {
86 .flags = IORESOURCE_MEM,
89 static struct platform_device ezbrd_flash_device = {
90 .name = "physmap-flash",
93 .platform_data = &ezbrd_flash_data,
96 .resource = &ezbrd_flash_resource,
100 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
101 static struct platform_device rtc_device = {
107 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
108 static struct platform_device bfin_mii_bus = {
109 .name = "bfin_mii_bus",
112 static struct platform_device bfin_mac_device = {
114 .dev.platform_data = &bfin_mii_bus,
118 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
119 static struct dsa_platform_data ksz8893m_switch_data = {
120 .mii_bus = &bfin_mii_bus.dev,
121 .netdev = &bfin_mac_device.dev,
122 .port_names[0] = NULL,
123 .port_names[1] = "eth%d",
124 .port_names[2] = "eth%d",
125 .port_names[3] = "cpu",
128 static struct platform_device ksz8893m_switch_device = {
132 .dev.platform_data = &ksz8893m_switch_data,
136 #if defined(CONFIG_MTD_M25P80) \
137 || defined(CONFIG_MTD_M25P80_MODULE)
138 static struct mtd_partition bfin_spi_flash_partitions[] = {
140 .name = "bootloader(spi)",
143 .mask_flags = MTD_CAP_ROM
145 .name = "linux kernel(spi)",
146 .size = MTDPART_SIZ_FULL,
147 .offset = MTDPART_OFS_APPEND,
151 static struct flash_platform_data bfin_spi_flash_data = {
153 .parts = bfin_spi_flash_partitions,
154 .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
158 /* SPI flash chip (m25p64) */
159 static struct bfin5xx_spi_chip spi_flash_chip_info = {
160 .enable_dma = 0, /* use dma transfer with this chip*/
165 #if defined(CONFIG_SPI_ADC_BF533) \
166 || defined(CONFIG_SPI_ADC_BF533_MODULE)
168 static struct bfin5xx_spi_chip spi_adc_chip_info = {
169 .enable_dma = 1, /* use dma transfer with this chip*/
174 #if defined(CONFIG_NET_DSA_KSZ8893M) \
175 || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
176 /* SPI SWITCH CHIP */
177 static struct bfin5xx_spi_chip spi_switch_info = {
183 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
184 static struct bfin5xx_spi_chip spi_mmc_chip_info = {
190 #if defined(CONFIG_PBX)
191 static struct bfin5xx_spi_chip spi_si3xxx_chip_info = {
192 .ctl_reg = 0x4, /* send zero */
195 .cs_change_per_word = 1,
199 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
200 static struct bfin5xx_spi_chip spi_ad7877_chip_info = {
205 static const struct ad7877_platform_data bfin_ad7877_ts_info = {
207 .vref_delay_usecs = 50, /* internal, no capacitor */
210 .pressure_max = 1000,
212 .stopacq_polarity = 1,
213 .first_conversion_delay = 3,
214 .acquisition_time = 1,
216 .pen_down_acc_interval = 1,
220 #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
221 && defined(CONFIG_SND_SOC_WM8731_SPI)
222 static struct bfin5xx_spi_chip spi_wm8731_chip_info = {
228 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
229 static struct bfin5xx_spi_chip spidev_chip_info = {
235 static struct spi_board_info bfin_spi_board_info[] __initdata = {
236 #if defined(CONFIG_MTD_M25P80) \
237 || defined(CONFIG_MTD_M25P80_MODULE)
239 /* the modalias must be the same as spi device driver name */
240 .modalias = "m25p80", /* Name of spi_driver for this device */
241 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
242 .bus_num = 0, /* Framework bus number */
243 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
244 .platform_data = &bfin_spi_flash_data,
245 .controller_data = &spi_flash_chip_info,
250 #if defined(CONFIG_SPI_ADC_BF533) \
251 || defined(CONFIG_SPI_ADC_BF533_MODULE)
253 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
254 .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */
255 .bus_num = 0, /* Framework bus number */
256 .chip_select = 1, /* Framework chip select. */
257 .platform_data = NULL, /* No spi_driver specific config */
258 .controller_data = &spi_adc_chip_info,
262 #if defined(CONFIG_NET_DSA_KSZ8893M) \
263 || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
265 .modalias = "ksz8893m",
266 .max_speed_hz = 5000000,
269 .platform_data = NULL,
270 .controller_data = &spi_switch_info,
275 #if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
277 .modalias = "spi_mmc_dummy",
278 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
281 .platform_data = NULL,
282 .controller_data = &spi_mmc_chip_info,
286 .modalias = "spi_mmc",
287 .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */
289 .chip_select = CONFIG_SPI_MMC_CS_CHAN,
290 .platform_data = NULL,
291 .controller_data = &spi_mmc_chip_info,
295 #if defined(CONFIG_PBX)
297 .modalias = "fxs-spi",
298 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
300 .chip_select = 8 - CONFIG_J11_JUMPER,
301 .controller_data = &spi_si3xxx_chip_info,
305 .modalias = "fxo-spi",
306 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
308 .chip_select = 8 - CONFIG_J19_JUMPER,
309 .controller_data = &spi_si3xxx_chip_info,
313 #if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE)
315 .modalias = "ad7877",
316 .platform_data = &bfin_ad7877_ts_info,
318 .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
321 .controller_data = &spi_ad7877_chip_info,
324 #if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \
325 && defined(CONFIG_SND_SOC_WM8731_SPI)
327 .modalias = "wm8731",
328 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
331 .controller_data = &spi_wm8731_chip_info,
335 #if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
337 .modalias = "spidev",
338 .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */
341 .controller_data = &spidev_chip_info,
344 #if defined(CONFIG_FB_BFIN_LQ035Q1) || defined(CONFIG_FB_BFIN_LQ035Q1_MODULE)
346 .modalias = "bfin-lq035q1-spi",
347 .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */
350 .controller_data = &lq035q1_spi_chip_info,
351 .mode = SPI_CPHA | SPI_CPOL,
356 /* SPI controller data */
357 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
359 static struct bfin5xx_spi_master bfin_spi0_info = {
361 .enable_dma = 1, /* master has the ability to do dma transfer */
362 .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
365 static struct resource bfin_spi0_resource[] = {
367 .start = SPI0_REGBASE,
368 .end = SPI0_REGBASE + 0xFF,
369 .flags = IORESOURCE_MEM,
374 .flags = IORESOURCE_IRQ,
378 static struct platform_device bfin_spi0_device = {
380 .id = 0, /* Bus number */
381 .num_resources = ARRAY_SIZE(bfin_spi0_resource),
382 .resource = bfin_spi0_resource,
384 .platform_data = &bfin_spi0_info, /* Passed to driver */
389 static struct bfin5xx_spi_master bfin_spi1_info = {
391 .enable_dma = 1, /* master has the ability to do dma transfer */
392 .pin_req = {P_SPI1_SCK, P_SPI1_MISO, P_SPI1_MOSI, 0},
395 static struct resource bfin_spi1_resource[] = {
397 .start = SPI1_REGBASE,
398 .end = SPI1_REGBASE + 0xFF,
399 .flags = IORESOURCE_MEM,
404 .flags = IORESOURCE_IRQ,
408 static struct platform_device bfin_spi1_device = {
410 .id = 1, /* Bus number */
411 .num_resources = ARRAY_SIZE(bfin_spi1_resource),
412 .resource = bfin_spi1_resource,
414 .platform_data = &bfin_spi1_info, /* Passed to driver */
417 #endif /* spi master and devices */
419 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
420 static struct resource bfin_uart_resources[] = {
421 #ifdef CONFIG_SERIAL_BFIN_UART0
425 .flags = IORESOURCE_MEM,
428 #ifdef CONFIG_SERIAL_BFIN_UART1
432 .flags = IORESOURCE_MEM,
437 static struct platform_device bfin_uart_device = {
440 .num_resources = ARRAY_SIZE(bfin_uart_resources),
441 .resource = bfin_uart_resources,
445 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
446 #ifdef CONFIG_BFIN_SIR0
447 static struct resource bfin_sir0_resources[] = {
451 .flags = IORESOURCE_MEM,
454 .start = IRQ_UART0_RX,
455 .end = IRQ_UART0_RX+1,
456 .flags = IORESOURCE_IRQ,
459 .start = CH_UART0_RX,
460 .end = CH_UART0_RX+1,
461 .flags = IORESOURCE_DMA,
465 static struct platform_device bfin_sir0_device = {
468 .num_resources = ARRAY_SIZE(bfin_sir0_resources),
469 .resource = bfin_sir0_resources,
472 #ifdef CONFIG_BFIN_SIR1
473 static struct resource bfin_sir1_resources[] = {
477 .flags = IORESOURCE_MEM,
480 .start = IRQ_UART1_RX,
481 .end = IRQ_UART1_RX+1,
482 .flags = IORESOURCE_IRQ,
485 .start = CH_UART1_RX,
486 .end = CH_UART1_RX+1,
487 .flags = IORESOURCE_DMA,
491 static struct platform_device bfin_sir1_device = {
494 .num_resources = ARRAY_SIZE(bfin_sir1_resources),
495 .resource = bfin_sir1_resources,
500 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
501 static struct resource bfin_twi0_resource[] = {
503 .start = TWI0_REGBASE,
505 .flags = IORESOURCE_MEM,
510 .flags = IORESOURCE_IRQ,
514 static struct platform_device i2c_bfin_twi_device = {
515 .name = "i2c-bfin-twi",
517 .num_resources = ARRAY_SIZE(bfin_twi0_resource),
518 .resource = bfin_twi0_resource,
522 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
523 #if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
525 I2C_BOARD_INFO("pcf8574_lcd", 0x22),
528 #if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
530 I2C_BOARD_INFO("pcf8574_keypad", 0x27),
536 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
537 static struct platform_device bfin_sport0_uart_device = {
538 .name = "bfin-sport-uart",
542 static struct platform_device bfin_sport1_uart_device = {
543 .name = "bfin-sport-uart",
548 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
549 #include <linux/input.h>
550 #include <linux/gpio_keys.h>
552 static struct gpio_keys_button bfin_gpio_keys_table[] = {
553 {BTN_0, GPIO_PG0, 1, "gpio-keys: BTN0"},
554 {BTN_1, GPIO_PG13, 1, "gpio-keys: BTN1"},
557 static struct gpio_keys_platform_data bfin_gpio_keys_data = {
558 .buttons = bfin_gpio_keys_table,
559 .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table),
562 static struct platform_device bfin_device_gpiokeys = {
565 .platform_data = &bfin_gpio_keys_data,
570 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
572 static struct bfin_sd_host bfin_sdh_data = {
574 .irq_int0 = IRQ_RSI_INT0,
575 .pin_req = {P_RSI_DATA0, P_RSI_DATA1, P_RSI_DATA2, P_RSI_DATA3, P_RSI_CMD, P_RSI_CLK, 0},
578 static struct platform_device bf51x_sdh_device = {
582 .platform_data = &bfin_sdh_data,
587 static struct resource bfin_gpios_resources = {
589 .end = MAX_BLACKFIN_GPIOS - 1,
590 .flags = IORESOURCE_IRQ,
593 static struct platform_device bfin_gpios_device = {
594 .name = "simple-gpio",
597 .resource = &bfin_gpios_resources,
600 static const unsigned int cclk_vlev_datasheet[] =
602 VRPAIR(VLEV_100, 400000000),
603 VRPAIR(VLEV_105, 426000000),
604 VRPAIR(VLEV_110, 500000000),
605 VRPAIR(VLEV_115, 533000000),
606 VRPAIR(VLEV_120, 600000000),
609 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
610 .tuple_tab = cclk_vlev_datasheet,
611 .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
612 .vr_settling_time = 25 /* us */,
615 static struct platform_device bfin_dpmc = {
618 .platform_data = &bfin_dmpc_vreg_data,
622 static struct platform_device *stamp_devices[] __initdata = {
626 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
630 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
635 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
636 &ksz8893m_switch_device,
639 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
644 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
648 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
649 #ifdef CONFIG_BFIN_SIR0
652 #ifdef CONFIG_BFIN_SIR1
657 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
658 &i2c_bfin_twi_device,
661 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
662 &bfin_sport0_uart_device,
663 &bfin_sport1_uart_device,
666 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
667 &bfin_device_gpiokeys,
670 #if defined(CONFIG_SDH_BFIN) || defined(CONFIG_SDH_BFIN_MODULE)
674 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
681 static int __init ezbrd_init(void)
683 printk(KERN_INFO "%s(): registering device resources\n", __func__);
684 i2c_register_board_info(0, bfin_i2c_board_info,
685 ARRAY_SIZE(bfin_i2c_board_info));
686 platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
687 spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
691 arch_initcall(ezbrd_init);
693 void native_machine_restart(char *cmd)
695 /* workaround reboot hang when booting from SPI */
696 if ((bfin_read_SYSCR() & 0x7) == 0x3)
697 bfin_reset_boot_spi_cs(P_DEFAULT_BOOT_SPI_CS);
700 void bfin_get_ether_addr(char *addr)
702 /* the MAC is stored in OTP memory page 0xDF */
705 u32 (*otp_read)(u32 page, u32 flags, u64 *page_content) = (void *)0xEF00001A;
707 ret = otp_read(0xDF, 0x00, &otp_mac);
709 char *otp_mac_p = (char *)&otp_mac;
710 for (ret = 0; ret < 6; ++ret)
711 addr[ret] = otp_mac_p[5 - ret];
714 EXPORT_SYMBOL(bfin_get_ether_addr);