2 * VMI specific paravirt-ops implementation
4 * Copyright (C) 2005, VMware, Inc.
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful, but
12 * WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
14 * NON INFRINGEMENT. See the GNU General Public License for more
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 * Send feedback to zach@vmware.com
25 #include <linux/module.h>
26 #include <linux/license.h>
27 #include <linux/cpu.h>
28 #include <linux/bootmem.h>
32 #include <asm/fixmap.h>
33 #include <asm/apicdef.h>
35 #include <asm/processor.h>
36 #include <asm/timer.h>
37 #include <asm/vmi_time.h>
39 /* Convenient for calling VMI functions indirectly in the ROM */
40 typedef u32 __attribute__((regparm(1))) (VROMFUNC)(void);
41 typedef u64 __attribute__((regparm(2))) (VROMLONGFUNC)(int);
43 #define call_vrom_func(rom,func) \
44 (((VROMFUNC *)(rom->func))())
46 #define call_vrom_long_func(rom,func,arg) \
47 (((VROMLONGFUNC *)(rom->func)) (arg))
49 static struct vrom_header *vmi_rom;
50 static int license_gplok;
51 static int disable_pge;
52 static int disable_pse;
53 static int disable_sep;
54 static int disable_tsc;
55 static int disable_mtrr;
56 static int disable_noidle;
57 static int disable_vmi_timer;
59 /* Cached VMI operations */
61 void (*cpuid)(void /* non-c */);
62 void (*_set_ldt)(u32 selector);
63 void (*set_tr)(u32 selector);
64 void (*set_kernel_stack)(u32 selector, u32 esp0);
65 void (*allocate_page)(u32, u32, u32, u32, u32);
66 void (*release_page)(u32, u32);
67 void (*set_pte)(pte_t, pte_t *, unsigned);
68 void (*update_pte)(pte_t *, unsigned);
69 void (*set_linear_mapping)(int, u32, u32, u32);
70 void (*flush_tlb)(int);
71 void (*set_initial_ap_state)(int, int);
75 /* XXX move this to alternative.h */
76 extern struct paravirt_patch __start_parainstructions[],
77 __stop_parainstructions[];
80 * VMI patching routines.
82 #define MNEM_CALL 0xe8
86 static char irq_save_disable_callout[] = {
87 MNEM_CALL, 0, 0, 0, 0,
88 MNEM_CALL, 0, 0, 0, 0,
91 #define IRQ_PATCH_INT_MASK 0
92 #define IRQ_PATCH_DISABLE 5
94 static inline void patch_offset(unsigned char *eip, unsigned char *dest)
96 *(unsigned long *)(eip+1) = dest-eip-5;
99 static unsigned patch_internal(int call, unsigned len, void *insns)
102 struct vmi_relocation_info *const rel = (struct vmi_relocation_info *)&reloc;
103 reloc = call_vrom_long_func(vmi_rom, get_reloc, call);
105 case VMI_RELOCATION_CALL_REL:
107 *(char *)insns = MNEM_CALL;
108 patch_offset(insns, rel->eip);
111 case VMI_RELOCATION_JUMP_REL:
113 *(char *)insns = MNEM_JMP;
114 patch_offset(insns, rel->eip);
117 case VMI_RELOCATION_NOP:
118 /* obliterate the whole thing */
121 case VMI_RELOCATION_NONE:
122 /* leave native code in place */
132 * Apply patch if appropriate, return length of new instruction
133 * sequence. The callee does nop padding for us.
135 static unsigned vmi_patch(u8 type, u16 clobbers, void *insns, unsigned len)
138 case PARAVIRT_IRQ_DISABLE:
139 return patch_internal(VMI_CALL_DisableInterrupts, len, insns);
140 case PARAVIRT_IRQ_ENABLE:
141 return patch_internal(VMI_CALL_EnableInterrupts, len, insns);
142 case PARAVIRT_RESTORE_FLAGS:
143 return patch_internal(VMI_CALL_SetInterruptMask, len, insns);
144 case PARAVIRT_SAVE_FLAGS:
145 return patch_internal(VMI_CALL_GetInterruptMask, len, insns);
146 case PARAVIRT_SAVE_FLAGS_IRQ_DISABLE:
148 patch_internal(VMI_CALL_GetInterruptMask, len, insns);
149 patch_internal(VMI_CALL_DisableInterrupts, len-5, insns+5);
153 * You bastards didn't leave enough room to
154 * patch save_flags_irq_disable inline. Patch
158 *(char *)insns = MNEM_CALL;
159 patch_offset(insns, irq_save_disable_callout);
162 case PARAVIRT_INTERRUPT_RETURN:
163 return patch_internal(VMI_CALL_IRET, len, insns);
164 case PARAVIRT_STI_SYSEXIT:
165 return patch_internal(VMI_CALL_SYSEXIT, len, insns);
172 /* CPUID has non-C semantics, and paravirt-ops API doesn't match hardware ISA */
173 static void vmi_cpuid(unsigned int *eax, unsigned int *ebx,
174 unsigned int *ecx, unsigned int *edx)
179 asm volatile ("call *%6"
184 : "0" (*eax), "2" (*ecx), "r" (vmi_ops.cpuid));
187 *edx &= ~X86_FEATURE_PSE;
189 *edx &= ~X86_FEATURE_PGE;
191 *edx &= ~X86_FEATURE_SEP;
193 *edx &= ~X86_FEATURE_TSC;
195 *edx &= ~X86_FEATURE_MTRR;
199 static inline void vmi_maybe_load_tls(struct desc_struct *gdt, int nr, struct desc_struct *new)
201 if (gdt[nr].a != new->a || gdt[nr].b != new->b)
202 write_gdt_entry(gdt, nr, new->a, new->b);
205 static void vmi_load_tls(struct thread_struct *t, unsigned int cpu)
207 struct desc_struct *gdt = get_cpu_gdt_table(cpu);
208 vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 0, &t->tls_array[0]);
209 vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 1, &t->tls_array[1]);
210 vmi_maybe_load_tls(gdt, GDT_ENTRY_TLS_MIN + 2, &t->tls_array[2]);
213 static void vmi_set_ldt(const void *addr, unsigned entries)
215 unsigned cpu = smp_processor_id();
218 pack_descriptor(&low, &high, (unsigned long)addr,
219 entries * sizeof(struct desc_struct) - 1,
221 write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT, low, high);
222 vmi_ops._set_ldt(entries ? GDT_ENTRY_LDT*sizeof(struct desc_struct) : 0);
225 static void vmi_set_tr(void)
227 vmi_ops.set_tr(GDT_ENTRY_TSS*sizeof(struct desc_struct));
230 static void vmi_load_esp0(struct tss_struct *tss,
231 struct thread_struct *thread)
233 tss->esp0 = thread->esp0;
235 /* This can only happen when SEP is enabled, no need to test "SEP"arately */
236 if (unlikely(tss->ss1 != thread->sysenter_cs)) {
237 tss->ss1 = thread->sysenter_cs;
238 wrmsr(MSR_IA32_SYSENTER_CS, thread->sysenter_cs, 0);
240 vmi_ops.set_kernel_stack(__KERNEL_DS, tss->esp0);
243 static void vmi_flush_tlb_user(void)
245 vmi_ops.flush_tlb(VMI_FLUSH_TLB);
248 static void vmi_flush_tlb_kernel(void)
250 vmi_ops.flush_tlb(VMI_FLUSH_TLB | VMI_FLUSH_GLOBAL);
253 /* Stub to do nothing at all; used for delays and unimplemented calls */
254 static void vmi_nop(void)
258 /* For NO_IDLE_HZ, we stop the clock when halting the kernel */
259 static fastcall void vmi_safe_halt(void)
261 int idle = vmi_stop_hz_timer();
265 vmi_account_time_restart_hz_timer();
270 #ifdef CONFIG_DEBUG_PAGE_TYPE
272 #ifdef CONFIG_X86_PAE
273 #define MAX_BOOT_PTS (2048+4+1)
275 #define MAX_BOOT_PTS (1024+1)
279 * During boot, mem_map is not yet available in paging_init, so stash
280 * all the boot page allocations here.
285 } boot_page_allocations[MAX_BOOT_PTS];
286 static int num_boot_page_allocations;
287 static int boot_allocations_applied;
289 void vmi_apply_boot_page_allocations(void)
293 for (i = 0; i < num_boot_page_allocations; i++) {
294 struct page *page = pfn_to_page(boot_page_allocations[i].pfn);
295 page->type = boot_page_allocations[i].type;
296 page->type = boot_page_allocations[i].type &
297 ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE);
299 boot_allocations_applied = 1;
302 static void record_page_type(u32 pfn, int type)
304 BUG_ON(num_boot_page_allocations >= MAX_BOOT_PTS);
305 boot_page_allocations[num_boot_page_allocations].pfn = pfn;
306 boot_page_allocations[num_boot_page_allocations].type = type;
307 num_boot_page_allocations++;
310 static void check_zeroed_page(u32 pfn, int type, struct page *page)
314 int limit = PAGE_SIZE / sizeof(int);
316 if (page_address(page))
317 ptr = (u32 *)page_address(page);
319 ptr = (u32 *)__va(pfn << PAGE_SHIFT);
321 * When cloning the root in non-PAE mode, only the userspace
322 * pdes need to be zeroed.
324 if (type & VMI_PAGE_CLONE)
325 limit = USER_PTRS_PER_PGD;
326 for (i = 0; i < limit; i++)
331 * We stash the page type into struct page so we can verify the page
332 * types are used properly.
334 static void vmi_set_page_type(u32 pfn, int type)
336 /* PAE can have multiple roots per page - don't track */
337 if (PTRS_PER_PMD > 1 && (type & VMI_PAGE_PDP))
340 if (boot_allocations_applied) {
341 struct page *page = pfn_to_page(pfn);
342 if (type != VMI_PAGE_NORMAL)
345 BUG_ON(page->type == VMI_PAGE_NORMAL);
346 page->type = type & ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE);
347 if (type & VMI_PAGE_ZEROED)
348 check_zeroed_page(pfn, type, page);
350 record_page_type(pfn, type);
354 static void vmi_check_page_type(u32 pfn, int type)
356 /* PAE can have multiple roots per page - skip checks */
357 if (PTRS_PER_PMD > 1 && (type & VMI_PAGE_PDP))
360 type &= ~(VMI_PAGE_ZEROED | VMI_PAGE_CLONE);
361 if (boot_allocations_applied) {
362 struct page *page = pfn_to_page(pfn);
363 BUG_ON((page->type ^ type) & VMI_PAGE_PAE);
364 BUG_ON(type == VMI_PAGE_NORMAL && page->type);
365 BUG_ON((type & page->type) == 0);
369 #define vmi_set_page_type(p,t) do { } while (0)
370 #define vmi_check_page_type(p,t) do { } while (0)
373 static void vmi_map_pt_hook(int type, pte_t *va, u32 pfn)
376 * Internally, the VMI ROM must map virtual addresses to physical
377 * addresses for processing MMU updates. By the time MMU updates
378 * are issued, this information is typically already lost.
379 * Fortunately, the VMI provides a cache of mapping slots for active
382 * We use slot zero for the linear mapping of physical memory, and
383 * in HIGHPTE kernels, slot 1 and 2 for KM_PTE0 and KM_PTE1.
385 * args: SLOT VA COUNT PFN
387 BUG_ON(type != KM_PTE0 && type != KM_PTE1);
388 vmi_ops.set_linear_mapping((type - KM_PTE0)+1, (u32)va, 1, pfn);
391 static void vmi_allocate_pt(u32 pfn)
393 vmi_set_page_type(pfn, VMI_PAGE_L1);
394 vmi_ops.allocate_page(pfn, VMI_PAGE_L1, 0, 0, 0);
397 static void vmi_allocate_pd(u32 pfn)
400 * This call comes in very early, before mem_map is setup.
401 * It is called only for swapper_pg_dir, which already has
404 vmi_set_page_type(pfn, VMI_PAGE_L2);
405 vmi_ops.allocate_page(pfn, VMI_PAGE_L2, 0, 0, 0);
408 static void vmi_allocate_pd_clone(u32 pfn, u32 clonepfn, u32 start, u32 count)
410 vmi_set_page_type(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE);
411 vmi_check_page_type(clonepfn, VMI_PAGE_L2);
412 vmi_ops.allocate_page(pfn, VMI_PAGE_L2 | VMI_PAGE_CLONE, clonepfn, start, count);
415 static void vmi_release_pt(u32 pfn)
417 vmi_ops.release_page(pfn, VMI_PAGE_L1);
418 vmi_set_page_type(pfn, VMI_PAGE_NORMAL);
421 static void vmi_release_pd(u32 pfn)
423 vmi_ops.release_page(pfn, VMI_PAGE_L2);
424 vmi_set_page_type(pfn, VMI_PAGE_NORMAL);
428 * Helper macros for MMU update flags. We can defer updates until a flush
429 * or page invalidation only if the update is to the current address space
430 * (otherwise, there is no flush). We must check against init_mm, since
431 * this could be a kernel update, which usually passes init_mm, although
432 * sometimes this check can be skipped if we know the particular function
433 * is only called on user mode PTEs. We could change the kernel to pass
434 * current->active_mm here, but in particular, I was unsure if changing
435 * mm/highmem.c to do this would still be correct on other architectures.
437 #define is_current_as(mm, mustbeuser) ((mm) == current->active_mm || \
438 (!mustbeuser && (mm) == &init_mm))
439 #define vmi_flags_addr(mm, addr, level, user) \
440 ((level) | (is_current_as(mm, user) ? \
441 (VMI_PAGE_CURRENT_AS | ((addr) & VMI_PAGE_VA_MASK)) : 0))
442 #define vmi_flags_addr_defer(mm, addr, level, user) \
443 ((level) | (is_current_as(mm, user) ? \
444 (VMI_PAGE_DEFER | VMI_PAGE_CURRENT_AS | ((addr) & VMI_PAGE_VA_MASK)) : 0))
446 static void vmi_update_pte(struct mm_struct *mm, u32 addr, pte_t *ptep)
448 vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE);
449 vmi_ops.update_pte(ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0));
452 static void vmi_update_pte_defer(struct mm_struct *mm, u32 addr, pte_t *ptep)
454 vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE);
455 vmi_ops.update_pte(ptep, vmi_flags_addr_defer(mm, addr, VMI_PAGE_PT, 0));
458 static void vmi_set_pte(pte_t *ptep, pte_t pte)
460 /* XXX because of set_pmd_pte, this can be called on PT or PD layers */
461 vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE | VMI_PAGE_PD);
462 vmi_ops.set_pte(pte, ptep, VMI_PAGE_PT);
465 static void vmi_set_pte_at(struct mm_struct *mm, u32 addr, pte_t *ptep, pte_t pte)
467 vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE);
468 vmi_ops.set_pte(pte, ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0));
471 static void vmi_set_pmd(pmd_t *pmdp, pmd_t pmdval)
473 #ifdef CONFIG_X86_PAE
474 const pte_t pte = { pmdval.pmd, pmdval.pmd >> 32 };
475 vmi_check_page_type(__pa(pmdp) >> PAGE_SHIFT, VMI_PAGE_PMD);
477 const pte_t pte = { pmdval.pud.pgd.pgd };
478 vmi_check_page_type(__pa(pmdp) >> PAGE_SHIFT, VMI_PAGE_PGD);
480 vmi_ops.set_pte(pte, (pte_t *)pmdp, VMI_PAGE_PD);
483 #ifdef CONFIG_X86_PAE
485 static void vmi_set_pte_atomic(pte_t *ptep, pte_t pteval)
488 * XXX This is called from set_pmd_pte, but at both PT
489 * and PD layers so the VMI_PAGE_PT flag is wrong. But
490 * it is only called for large page mapping changes,
491 * the Xen backend, doesn't support large pages, and the
492 * ESX backend doesn't depend on the flag.
494 set_64bit((unsigned long long *)ptep,pte_val(pteval));
495 vmi_ops.update_pte(ptep, VMI_PAGE_PT);
498 static void vmi_set_pte_present(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte)
500 vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE);
501 vmi_ops.set_pte(pte, ptep, vmi_flags_addr_defer(mm, addr, VMI_PAGE_PT, 1));
504 static void vmi_set_pud(pud_t *pudp, pud_t pudval)
507 const pte_t pte = { pudval.pgd.pgd, pudval.pgd.pgd >> 32 };
508 vmi_check_page_type(__pa(pudp) >> PAGE_SHIFT, VMI_PAGE_PGD);
509 vmi_ops.set_pte(pte, (pte_t *)pudp, VMI_PAGE_PDP);
512 static void vmi_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
514 const pte_t pte = { 0 };
515 vmi_check_page_type(__pa(ptep) >> PAGE_SHIFT, VMI_PAGE_PTE);
516 vmi_ops.set_pte(pte, ptep, vmi_flags_addr(mm, addr, VMI_PAGE_PT, 0));
519 void vmi_pmd_clear(pmd_t *pmd)
521 const pte_t pte = { 0 };
522 vmi_check_page_type(__pa(pmd) >> PAGE_SHIFT, VMI_PAGE_PMD);
523 vmi_ops.set_pte(pte, (pte_t *)pmd, VMI_PAGE_PD);
528 struct vmi_ap_state ap;
529 extern void setup_pda(void);
531 static void __init /* XXX cpu hotplug */
532 vmi_startup_ipi_hook(int phys_apicid, unsigned long start_eip,
533 unsigned long start_esp)
535 /* Default everything to zero. This is fine for most GPRs. */
536 memset(&ap, 0, sizeof(struct vmi_ap_state));
538 ap.gdtr_limit = GDT_SIZE - 1;
539 ap.gdtr_base = (unsigned long) get_cpu_gdt_table(phys_apicid);
541 ap.idtr_limit = IDT_ENTRIES * 8 - 1;
542 ap.idtr_base = (unsigned long) idt_table;
547 ap.eip = (unsigned long) start_eip;
549 ap.esp = (unsigned long) start_esp;
553 ap.fs = __KERNEL_PDA;
560 #ifdef CONFIG_X86_PAE
561 /* efer should match BSP efer. */
564 rdmsr(MSR_EFER, l, h);
565 ap.efer = (unsigned long long) h << 32 | l;
569 ap.cr3 = __pa(swapper_pg_dir);
570 /* Protected mode, paging, AM, WP, NE, MP. */
572 ap.cr4 = mmu_cr4_features;
573 vmi_ops.set_initial_ap_state(__pa(&ap), phys_apicid);
577 static inline int __init check_vmi_rom(struct vrom_header *rom)
579 struct pci_header *pci;
580 struct pnp_header *pnp;
581 const char *manufacturer = "UNKNOWN";
582 const char *product = "UNKNOWN";
583 const char *license = "unspecified";
585 if (rom->rom_signature != 0xaa55)
587 if (rom->vrom_signature != VMI_SIGNATURE)
589 if (rom->api_version_maj != VMI_API_REV_MAJOR ||
590 rom->api_version_min+1 < VMI_API_REV_MINOR+1) {
591 printk(KERN_WARNING "VMI: Found mismatched rom version %d.%d\n",
592 rom->api_version_maj,
593 rom->api_version_min);
598 * Relying on the VMI_SIGNATURE field is not 100% safe, so check
599 * the PCI header and device type to make sure this is really a
602 if (!rom->pci_header_offs) {
603 printk(KERN_WARNING "VMI: ROM does not contain PCI header.\n");
607 pci = (struct pci_header *)((char *)rom+rom->pci_header_offs);
608 if (pci->vendorID != PCI_VENDOR_ID_VMWARE ||
609 pci->deviceID != PCI_DEVICE_ID_VMWARE_VMI) {
610 /* Allow it to run... anyways, but warn */
611 printk(KERN_WARNING "VMI: ROM from unknown manufacturer\n");
614 if (rom->pnp_header_offs) {
615 pnp = (struct pnp_header *)((char *)rom+rom->pnp_header_offs);
616 if (pnp->manufacturer_offset)
617 manufacturer = (const char *)rom+pnp->manufacturer_offset;
618 if (pnp->product_offset)
619 product = (const char *)rom+pnp->product_offset;
622 if (rom->license_offs)
623 license = (char *)rom+rom->license_offs;
625 printk(KERN_INFO "VMI: Found %s %s, API version %d.%d, ROM version %d.%d\n",
626 manufacturer, product,
627 rom->api_version_maj, rom->api_version_min,
628 pci->rom_version_maj, pci->rom_version_min);
630 license_gplok = license_is_gpl_compatible(license);
631 if (!license_gplok) {
632 printk(KERN_WARNING "VMI: ROM license '%s' taints kernel... "
633 "inlining disabled\n",
635 add_taint(TAINT_PROPRIETARY_MODULE);
641 * Probe for the VMI option ROM
643 static inline int __init probe_vmi_rom(void)
647 /* VMI ROM is in option ROM area, check signature */
648 for (base = 0xC0000; base < 0xE0000; base += 2048) {
649 struct vrom_header *romstart;
650 romstart = (struct vrom_header *)isa_bus_to_virt(base);
651 if (check_vmi_rom(romstart)) {
660 * VMI setup common to all processors
662 void vmi_bringup(void)
664 /* We must establish the lowmem mapping for MMU ops to work */
665 if (vmi_ops.set_linear_mapping)
666 vmi_ops.set_linear_mapping(0, __PAGE_OFFSET, max_low_pfn, 0);
670 * Return a pointer to a VMI function or NULL if unimplemented
672 static void *vmi_get_function(int vmicall)
675 const struct vmi_relocation_info *rel = (struct vmi_relocation_info *)&reloc;
676 reloc = call_vrom_long_func(vmi_rom, get_reloc, vmicall);
677 BUG_ON(rel->type == VMI_RELOCATION_JUMP_REL);
678 if (rel->type == VMI_RELOCATION_CALL_REL)
679 return (void *)rel->eip;
685 * Helper macro for making the VMI paravirt-ops fill code readable.
686 * For unimplemented operations, fall back to default, unless nop
687 * is returned by the ROM.
689 #define para_fill(opname, vmicall) \
691 reloc = call_vrom_long_func(vmi_rom, get_reloc, \
692 VMI_CALL_##vmicall); \
693 if (rel->type != VMI_RELOCATION_NONE) { \
694 BUG_ON(rel->type != VMI_RELOCATION_CALL_REL); \
695 paravirt_ops.opname = (void *)rel->eip; \
696 } else if (rel->type == VMI_RELOCATION_NOP) \
697 paravirt_ops.opname = (void *)vmi_nop; \
701 * Helper macro for making the VMI paravirt-ops fill code readable.
702 * For cached operations which do not match the VMI ROM ABI and must
703 * go through a tranlation stub. Ignore NOPs, since it is not clear
704 * a NOP * VMI function corresponds to a NOP paravirt-op when the
705 * functions are not in 1-1 correspondence.
707 #define para_wrap(opname, wrapper, cache, vmicall) \
709 reloc = call_vrom_long_func(vmi_rom, get_reloc, \
710 VMI_CALL_##vmicall); \
711 BUG_ON(rel->type == VMI_RELOCATION_JUMP_REL); \
712 if (rel->type == VMI_RELOCATION_CALL_REL) { \
713 paravirt_ops.opname = wrapper; \
714 vmi_ops.cache = (void *)rel->eip; \
720 * Activate the VMI interface and switch into paravirtualized mode
722 static inline int __init activate_vmi(void)
726 const struct vmi_relocation_info *rel = (struct vmi_relocation_info *)&reloc;
728 if (call_vrom_func(vmi_rom, vmi_init) != 0) {
729 printk(KERN_ERR "VMI ROM failed to initialize!");
732 savesegment(cs, kernel_cs);
734 paravirt_ops.paravirt_enabled = 1;
735 paravirt_ops.kernel_rpl = kernel_cs & SEGMENT_RPL_MASK;
737 paravirt_ops.patch = vmi_patch;
738 paravirt_ops.name = "vmi";
741 * Many of these operations are ABI compatible with VMI.
742 * This means we can fill in the paravirt-ops with direct
743 * pointers into the VMI ROM. If the calling convention for
744 * these operations changes, this code needs to be updated.
747 * CPUID paravirt-op uses pointers, not the native ISA
748 * halt has no VMI equivalent; all VMI halts are "safe"
749 * no MSR support yet - just trap and emulate. VMI uses the
750 * same ABI as the native ISA, but Linux wants exceptions
751 * from bogus MSR read / write handled
752 * rdpmc is not yet used in Linux
755 /* CPUID is special, so very special it gets wrapped like a present */
756 para_wrap(cpuid, vmi_cpuid, cpuid, CPUID);
758 para_fill(clts, CLTS);
759 para_fill(get_debugreg, GetDR);
760 para_fill(set_debugreg, SetDR);
761 para_fill(read_cr0, GetCR0);
762 para_fill(read_cr2, GetCR2);
763 para_fill(read_cr3, GetCR3);
764 para_fill(read_cr4, GetCR4);
765 para_fill(write_cr0, SetCR0);
766 para_fill(write_cr2, SetCR2);
767 para_fill(write_cr3, SetCR3);
768 para_fill(write_cr4, SetCR4);
769 para_fill(save_fl, GetInterruptMask);
770 para_fill(restore_fl, SetInterruptMask);
771 para_fill(irq_disable, DisableInterrupts);
772 para_fill(irq_enable, EnableInterrupts);
774 /* irq_save_disable !!! sheer pain */
775 patch_offset(&irq_save_disable_callout[IRQ_PATCH_INT_MASK],
776 (char *)paravirt_ops.save_fl);
777 patch_offset(&irq_save_disable_callout[IRQ_PATCH_DISABLE],
778 (char *)paravirt_ops.irq_disable);
780 para_fill(wbinvd, WBINVD);
781 para_fill(read_tsc, RDTSC);
783 /* The following we emulate with trap and emulate for now */
784 /* paravirt_ops.read_msr = vmi_rdmsr */
785 /* paravirt_ops.write_msr = vmi_wrmsr */
786 /* paravirt_ops.rdpmc = vmi_rdpmc */
788 /* TR interface doesn't pass TR value, wrap */
789 para_wrap(load_tr_desc, vmi_set_tr, set_tr, SetTR);
791 /* LDT is special, too */
792 para_wrap(set_ldt, vmi_set_ldt, _set_ldt, SetLDT);
794 para_fill(load_gdt, SetGDT);
795 para_fill(load_idt, SetIDT);
796 para_fill(store_gdt, GetGDT);
797 para_fill(store_idt, GetIDT);
798 para_fill(store_tr, GetTR);
799 paravirt_ops.load_tls = vmi_load_tls;
800 para_fill(write_ldt_entry, WriteLDTEntry);
801 para_fill(write_gdt_entry, WriteGDTEntry);
802 para_fill(write_idt_entry, WriteIDTEntry);
803 para_wrap(load_esp0, vmi_load_esp0, set_kernel_stack, UpdateKernelStack);
804 para_fill(set_iopl_mask, SetIOPLMask);
805 para_fill(io_delay, IODelay);
806 para_fill(set_lazy_mode, SetLazyMode);
808 /* user and kernel flush are just handled with different flags to FlushTLB */
809 para_wrap(flush_tlb_user, vmi_flush_tlb_user, flush_tlb, FlushTLB);
810 para_wrap(flush_tlb_kernel, vmi_flush_tlb_kernel, flush_tlb, FlushTLB);
811 para_fill(flush_tlb_single, InvalPage);
814 * Until a standard flag format can be agreed on, we need to
815 * implement these as wrappers in Linux. Get the VMI ROM
816 * function pointers for the two backend calls.
818 #ifdef CONFIG_X86_PAE
819 vmi_ops.set_pte = vmi_get_function(VMI_CALL_SetPxELong);
820 vmi_ops.update_pte = vmi_get_function(VMI_CALL_UpdatePxELong);
822 vmi_ops.set_pte = vmi_get_function(VMI_CALL_SetPxE);
823 vmi_ops.update_pte = vmi_get_function(VMI_CALL_UpdatePxE);
826 if (vmi_ops.set_pte) {
827 paravirt_ops.set_pte = vmi_set_pte;
828 paravirt_ops.set_pte_at = vmi_set_pte_at;
829 paravirt_ops.set_pmd = vmi_set_pmd;
830 #ifdef CONFIG_X86_PAE
831 paravirt_ops.set_pte_atomic = vmi_set_pte_atomic;
832 paravirt_ops.set_pte_present = vmi_set_pte_present;
833 paravirt_ops.set_pud = vmi_set_pud;
834 paravirt_ops.pte_clear = vmi_pte_clear;
835 paravirt_ops.pmd_clear = vmi_pmd_clear;
839 if (vmi_ops.update_pte) {
840 paravirt_ops.pte_update = vmi_update_pte;
841 paravirt_ops.pte_update_defer = vmi_update_pte_defer;
844 vmi_ops.allocate_page = vmi_get_function(VMI_CALL_AllocatePage);
845 if (vmi_ops.allocate_page) {
846 paravirt_ops.alloc_pt = vmi_allocate_pt;
847 paravirt_ops.alloc_pd = vmi_allocate_pd;
848 paravirt_ops.alloc_pd_clone = vmi_allocate_pd_clone;
851 vmi_ops.release_page = vmi_get_function(VMI_CALL_ReleasePage);
852 if (vmi_ops.release_page) {
853 paravirt_ops.release_pt = vmi_release_pt;
854 paravirt_ops.release_pd = vmi_release_pd;
856 para_wrap(map_pt_hook, vmi_map_pt_hook, set_linear_mapping,
860 * These MUST always be patched. Don't support indirect jumps
861 * through these operations, as the VMI interface may use either
862 * a jump or a call to get to these operations, depending on
863 * the backend. They are performance critical anyway, so requiring
864 * a patch is not a big problem.
866 paravirt_ops.irq_enable_sysexit = (void *)0xfeedbab0;
867 paravirt_ops.iret = (void *)0xbadbab0;
870 para_wrap(startup_ipi_hook, vmi_startup_ipi_hook, set_initial_ap_state, SetInitialAPState);
873 #ifdef CONFIG_X86_LOCAL_APIC
874 para_fill(apic_read, APICRead);
875 para_fill(apic_write, APICWrite);
876 para_fill(apic_write_atomic, APICWrite);
880 * Check for VMI timer functionality by probing for a cycle frequency method
882 reloc = call_vrom_long_func(vmi_rom, get_reloc, VMI_CALL_GetCycleFrequency);
883 if (!disable_vmi_timer && rel->type != VMI_RELOCATION_NONE) {
884 vmi_timer_ops.get_cycle_frequency = (void *)rel->eip;
885 vmi_timer_ops.get_cycle_counter =
886 vmi_get_function(VMI_CALL_GetCycleCounter);
887 vmi_timer_ops.get_wallclock =
888 vmi_get_function(VMI_CALL_GetWallclockTime);
889 vmi_timer_ops.wallclock_updated =
890 vmi_get_function(VMI_CALL_WallclockUpdated);
891 vmi_timer_ops.set_alarm = vmi_get_function(VMI_CALL_SetAlarm);
892 vmi_timer_ops.cancel_alarm =
893 vmi_get_function(VMI_CALL_CancelAlarm);
894 paravirt_ops.time_init = vmi_time_init;
895 paravirt_ops.get_wallclock = vmi_get_wallclock;
896 paravirt_ops.set_wallclock = vmi_set_wallclock;
897 #ifdef CONFIG_X86_LOCAL_APIC
898 paravirt_ops.setup_boot_clock = vmi_timer_setup_boot_alarm;
899 paravirt_ops.setup_secondary_clock = vmi_timer_setup_secondary_alarm;
901 paravirt_ops.get_scheduled_cycles = vmi_get_sched_cycles;
902 paravirt_ops.get_cpu_khz = vmi_cpu_khz;
904 /* We have true wallclock functions; disable CMOS clock sync */
905 no_sync_cmos_clock = 1;
908 disable_vmi_timer = 1;
911 /* No idle HZ mode only works if VMI timer and no idle is enabled */
912 if (disable_noidle || disable_vmi_timer)
913 para_fill(safe_halt, Halt);
915 para_wrap(safe_halt, vmi_safe_halt, halt, Halt);
918 * Alternative instruction rewriting doesn't happen soon enough
919 * to convert VMI_IRET to a call instead of a jump; so we have
920 * to do this before IRQs get reenabled. Fortunately, it is
923 apply_paravirt(__start_parainstructions, __stop_parainstructions);
932 void __init vmi_init(void)
939 check_vmi_rom(vmi_rom);
941 /* In case probing for or validating the ROM failed, basil */
945 reserve_top_address(-vmi_rom->virtual_top);
947 local_irq_save(flags);
950 #ifdef CONFIG_X86_IO_APIC
951 /* This is virtual hardware; timer routing is wired correctly */
954 local_irq_restore(flags & X86_EFLAGS_IF);
957 static int __init parse_vmi(char *arg)
962 if (!strcmp(arg, "disable_pge")) {
963 clear_bit(X86_FEATURE_PGE, boot_cpu_data.x86_capability);
965 } else if (!strcmp(arg, "disable_pse")) {
966 clear_bit(X86_FEATURE_PSE, boot_cpu_data.x86_capability);
968 } else if (!strcmp(arg, "disable_sep")) {
969 clear_bit(X86_FEATURE_SEP, boot_cpu_data.x86_capability);
971 } else if (!strcmp(arg, "disable_tsc")) {
972 clear_bit(X86_FEATURE_TSC, boot_cpu_data.x86_capability);
974 } else if (!strcmp(arg, "disable_mtrr")) {
975 clear_bit(X86_FEATURE_MTRR, boot_cpu_data.x86_capability);
977 } else if (!strcmp(arg, "disable_timer")) {
978 disable_vmi_timer = 1;
980 } else if (!strcmp(arg, "disable_noidle"))
985 early_param("vmi", parse_vmi);