2 mainmenu "Linux Kernel Configuration for x86"
6 bool "64-bit kernel" if ARCH = "x86"
7 default ARCH = "x86_64"
9 Say yes to build a 64-bit kernel - formerly known as x86_64
10 Say no to build a 32-bit kernel - formerly known as i386
21 select HAVE_UNSTABLE_SCHED_CLOCK
24 select HAVE_IOREMAP_PROT
25 select HAVE_GET_USER_PAGES_FAST
27 select ARCH_WANT_OPTIONAL_GPIOLIB if !X86_RDC321X
28 select HAVE_KRETPROBES
29 select HAVE_DYNAMIC_FTRACE
31 select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
32 select HAVE_ARCH_KGDB if !X86_VOYAGER
33 select HAVE_EFFICIENT_UNALIGNED_ACCESS
37 default "arch/x86/configs/i386_defconfig" if X86_32
38 default "arch/x86/configs/x86_64_defconfig" if X86_64
41 config GENERIC_LOCKBREAK
47 config GENERIC_CMOS_UPDATE
50 config CLOCKSOURCE_WATCHDOG
53 config GENERIC_CLOCKEVENTS
56 config GENERIC_CLOCKEVENTS_BROADCAST
58 depends on X86_64 || (X86_32 && X86_LOCAL_APIC)
60 config LOCKDEP_SUPPORT
63 config STACKTRACE_SUPPORT
66 config HAVE_LATENCYTOP_SUPPORT
69 config FAST_CMPXCHG_LOCAL
82 config GENERIC_ISA_DMA
92 config GENERIC_HWEIGHT
98 config ARCH_MAY_HAVE_PC_FDC
101 config RWSEM_GENERIC_SPINLOCK
104 config RWSEM_XCHGADD_ALGORITHM
107 config ARCH_HAS_ILOG2_U32
110 config ARCH_HAS_ILOG2_U64
113 config ARCH_HAS_CPU_IDLE_WAIT
116 config GENERIC_CALIBRATE_DELAY
119 config GENERIC_TIME_VSYSCALL
123 config ARCH_HAS_CPU_RELAX
126 config ARCH_HAS_CACHE_LINE_SIZE
129 config HAVE_SETUP_PER_CPU_AREA
130 def_bool X86_64_SMP || (X86_SMP && !X86_VOYAGER)
132 config HAVE_CPUMASK_OF_CPU_MAP
135 config ARCH_HIBERNATION_POSSIBLE
137 depends on !SMP || !X86_VOYAGER
139 config ARCH_SUSPEND_POSSIBLE
141 depends on !X86_VOYAGER
147 config ARCH_POPULATES_NODE_MAP
154 config ARCH_SUPPORTS_AOUT
157 config ARCH_SUPPORTS_OPTIMIZED_INLINING
160 # Use the generic interrupt handling code in kernel/irq/:
161 config GENERIC_HARDIRQS
165 config GENERIC_IRQ_PROBE
169 config GENERIC_PENDING_IRQ
171 depends on GENERIC_HARDIRQS && SMP
176 depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64)
177 select USE_GENERIC_SMP_HELPERS
182 depends on X86_32 && SMP
186 depends on X86_64 && SMP
191 depends on (X86_32 && !X86_VOYAGER) || X86_64
194 config X86_BIOS_REBOOT
196 depends on !X86_VOYAGER
199 config X86_TRAMPOLINE
201 depends on X86_SMP || (X86_VOYAGER && SMP) || (64BIT && ACPI_SLEEP)
206 source "init/Kconfig"
208 menu "Processor type and features"
210 source "kernel/time/Kconfig"
213 bool "Symmetric multi-processing support"
215 This enables support for systems with more than one CPU. If you have
216 a system with only one CPU, like most personal computers, say N. If
217 you have a system with more than one CPU, say Y.
219 If you say N here, the kernel will run on single and multiprocessor
220 machines, but will use only one CPU of a multiprocessor machine. If
221 you say Y here, the kernel will run on many, but not all,
222 singleprocessor machines. On a singleprocessor machine, the kernel
223 will run faster if you say N here.
225 Note that if you say Y here and choose architecture "586" or
226 "Pentium" under "Processor family", the kernel will not work on 486
227 architectures. Similarly, multiprocessor kernels for the "PPro"
228 architecture may not work on all Pentium based boards.
230 People using multiprocessor machines who say Y here should also say
231 Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
232 Management" code will be disabled if you say Y here.
234 See also <file:Documentation/i386/IO-APIC.txt>,
235 <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
236 <http://www.tldp.org/docs.html#howto>.
238 If you don't know what to do here, say N.
240 config X86_FIND_SMP_CONFIG
242 depends on X86_MPPARSE || X86_VOYAGER
247 bool "Enable MPS table"
248 depends on X86_LOCAL_APIC
250 For old smp systems that do not have proper acpi support. Newer systems
251 (esp with 64bit cpus) with acpi support, MADT and DSDT will override it
257 depends on X86_LOCAL_APIC
261 prompt "Subarchitecture Type"
267 Choose this option if your computer is a standard PC or compatible.
273 Select this for an AMD Elan processor.
275 Do not use this option for K6/Athlon/Opteron processors!
277 If unsure, choose "PC-compatible" instead.
281 depends on X86_32 && (SMP || BROKEN) && !PCI
283 Voyager is an MCA-based 32-way capable SMP architecture proprietary
284 to NCR Corp. Machine classes 345x/35xx/4100/51xx are Voyager-based.
288 If you do not specifically know you have a Voyager based machine,
289 say N here, otherwise the kernel you build will not be bootable.
291 config X86_GENERICARCH
292 bool "Generic architecture"
295 This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
296 subarchitectures. It is intended for a generic binary kernel.
297 if you select them all, kernel will probe it one by one. and will
303 bool "NUMAQ (IBM/Sequent)"
304 depends on SMP && X86_32 && PCI && X86_MPPARSE
307 This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
308 NUMA multiquad box. This changes the way that processors are
309 bootstrapped, and uses Clustered Logical APIC addressing mode instead
310 of Flat Logical. You will need a new lynxer.elf file to flash your
311 firmware with - send email to <Martin.Bligh@us.ibm.com>.
314 bool "Summit/EXA (IBM x440)"
315 depends on X86_32 && SMP
317 This option is needed for IBM systems that use the Summit/EXA chipset.
318 In particular, it is needed for the x440.
321 bool "Support for Unisys ES7000 IA32 series"
322 depends on X86_32 && SMP
324 Support for Unisys ES7000 systems. Say 'Y' here if this kernel is
325 supposed to run on an IA32-based Unisys ES7000 system.
328 bool "Support for big SMP systems with more than 8 CPUs"
329 depends on X86_32 && SMP
331 This option is needed for the systems that have more than 8 CPUs
332 and if the system is not of any sub-arch type above.
337 bool "RDC R-321x SoC"
340 select X86_REBOOTFIXUPS
346 This option is needed for RDC R-321x system-on-chip, also known
348 If you don't have one of these chips, you should say N here.
351 bool "Support for ScaleMP vSMP"
353 depends on X86_64 && PCI
355 Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is
356 supposed to run on these EM64T-based machines. Only choose this option
357 if you have one of these machines.
362 bool "SGI 320/540 (Visual Workstation)"
363 depends on X86_32 && PCI && !X86_VOYAGER && X86_MPPARSE && PCI_GODIRECT
365 The SGI Visual Workstation series is an IA32-based workstation
366 based on SGI systems chips with some legacy PC hardware attached.
368 Say Y here to create a kernel to run on the SGI 320 or 540.
370 A kernel compiled for the Visual Workstation will run on general
371 PCs as well. See <file:Documentation/sgi-visws.txt> for details.
373 config SCHED_NO_NO_OMIT_FRAME_POINTER
375 prompt "Single-depth WCHAN output"
378 Calculate simpler /proc/<PID>/wchan values. If this option
379 is disabled then wchan values will recurse back to the
380 caller function. This provides more accurate wchan values,
381 at the expense of slightly more scheduling overhead.
383 If in doubt, say "Y".
385 menuconfig PARAVIRT_GUEST
386 bool "Paravirtualized guest support"
388 Say Y here to get to see options related to running Linux under
389 various hypervisors. This option alone does not add any kernel code.
391 If you say N, all options in this submenu will be skipped and disabled.
395 source "arch/x86/xen/Kconfig"
398 bool "VMI Guest support"
401 depends on !X86_VOYAGER
403 VMI provides a paravirtualized interface to the VMware ESX server
404 (it could be used by other hypervisors in theory too, but is not
405 at the moment), by linking the kernel to a GPL-ed ROM module
406 provided by the hypervisor.
409 bool "KVM paravirtualized clock"
411 select PARAVIRT_CLOCK
412 depends on !X86_VOYAGER
414 Turning on this option will allow you to run a paravirtualized clock
415 when running over the KVM hypervisor. Instead of relying on a PIT
416 (or probably other) emulation by the underlying device model, the host
417 provides the guest with timing infrastructure such as time of day, and
421 bool "KVM Guest support"
423 depends on !X86_VOYAGER
425 This option enables various optimizations for running under the KVM
428 source "arch/x86/lguest/Kconfig"
431 bool "Enable paravirtualization code"
432 depends on !X86_VOYAGER
434 This changes the kernel so it can modify itself when it is run
435 under a hypervisor, potentially improving performance significantly
436 over full virtualization. However, when run without a hypervisor
437 the kernel is theoretically slower and slightly larger.
439 config PARAVIRT_CLOCK
445 config PARAVIRT_DEBUG
446 bool "paravirt-ops debugging"
447 depends on PARAVIRT && DEBUG_KERNEL
449 Enable to debug paravirt_ops internals. Specifically, BUG if
450 a paravirt_op is missing when it is called.
455 This option adds a kernel parameter 'memtest', which allows memtest
457 memtest=0, mean disabled; -- default
458 memtest=1, mean do 1 test pattern;
460 memtest=4, mean do 4 test patterns.
461 If you are unsure how to answer this question, answer N.
463 config X86_SUMMIT_NUMA
465 depends on X86_32 && NUMA && X86_GENERICARCH
467 config X86_CYCLONE_TIMER
469 depends on X86_GENERICARCH
471 config ES7000_CLUSTERED_APIC
473 depends on SMP && X86_ES7000 && MPENTIUMIII
475 source "arch/x86/Kconfig.cpu"
479 prompt "HPET Timer Support" if X86_32
481 Use the IA-PC HPET (High Precision Event Timer) to manage
482 time in preference to the PIT and RTC, if a HPET is
484 HPET is the next generation timer replacing legacy 8254s.
485 The HPET provides a stable time base on SMP
486 systems, unlike the TSC, but it is more expensive to access,
487 as it is off-chip. You can find the HPET spec at
488 <http://www.intel.com/hardwaredesign/hpetspec.htm>.
490 You can safely choose Y here. However, HPET will only be
491 activated if the platform and the BIOS support this feature.
492 Otherwise the 8254 will be used for timing services.
494 Choose N to continue using the legacy 8254 timer.
496 config HPET_EMULATE_RTC
498 depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y)
500 # Mark as embedded because too many people got it wrong.
501 # The code disables itself when not needed.
504 bool "Enable DMI scanning" if EMBEDDED
506 Enabled scanning of DMI to identify machine quirks. Say Y
507 here unless you have verified that your setup is not
508 affected by entries in the DMI blacklist. Required by PNP
512 bool "GART IOMMU support" if EMBEDDED
516 depends on X86_64 && PCI
518 Support for full DMA access of devices with 32bit memory access only
519 on systems with more than 3GB. This is usually needed for USB,
520 sound, many IDE/SATA chipsets and some other devices.
521 Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART
522 based hardware IOMMU and a software bounce buffer based IOMMU used
523 on Intel systems and as fallback.
524 The code is only active when needed (enough memory and limited
525 device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified
529 bool "IBM Calgary IOMMU support"
531 depends on X86_64 && PCI && EXPERIMENTAL
533 Support for hardware IOMMUs in IBM's xSeries x366 and x460
534 systems. Needed to run systems with more than 3GB of memory
535 properly with 32-bit PCI devices that do not support DAC
536 (Double Address Cycle). Calgary also supports bus level
537 isolation, where all DMAs pass through the IOMMU. This
538 prevents them from going anywhere except their intended
539 destination. This catches hard-to-find kernel bugs and
540 mis-behaving drivers and devices that do not use the DMA-API
541 properly to set up their DMA buffers. The IOMMU can be
542 turned off at boot time with the iommu=off parameter.
543 Normally the kernel will make the right choice by itself.
546 config CALGARY_IOMMU_ENABLED_BY_DEFAULT
548 prompt "Should Calgary be enabled by default?"
549 depends on CALGARY_IOMMU
551 Should Calgary be enabled by default? if you choose 'y', Calgary
552 will be used (if it exists). If you choose 'n', Calgary will not be
553 used even if it exists. If you choose 'n' and would like to use
554 Calgary anyway, pass 'iommu=calgary' on the kernel command line.
558 bool "AMD IOMMU support"
560 depends on X86_64 && PCI && ACPI
562 With this option you can enable support for AMD IOMMU hardware in
563 your system. An IOMMU is a hardware component which provides
564 remapping of DMA memory accesses from devices. With an AMD IOMMU you
565 can isolate the the DMA memory of different devices and protect the
566 system from misbehaving device drivers or hardware.
568 You can find out if your system has an AMD IOMMU if you look into
569 your BIOS for an option to enable it or if you have an IVRS ACPI
572 # need this always selected by IOMMU for the VIA workaround
576 Support for software bounce buffers used on x86-64 systems
577 which don't have a hardware IOMMU (e.g. the current generation
578 of Intel's x86-64 CPUs). Using this PCI devices which can only
579 access 32-bits of memory can be used on systems with more than
580 3 GB of memory. If unsure, say Y.
583 def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU)
585 bool "Configure Maximum number of SMP Processors and NUMA Nodes"
586 depends on X86_64 && SMP
589 Configure maximum number of CPUS and NUMA Nodes for this architecture.
600 int "Maximum number of CPUs (2-4096)"
603 default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
606 This allows you to specify the maximum number of CPUs which this
607 kernel will support. The maximum supported value is 4096 and the
608 minimum value which makes sense is 2.
610 This is purely to save memory - each supported CPU adds
611 approximately eight kilobytes to the kernel image.
615 bool "SMT (Hyperthreading) scheduler support"
618 SMT scheduler support improves the CPU scheduler's decision making
619 when dealing with Intel Pentium 4 chips with HyperThreading at a
620 cost of slightly increased overhead in some places. If unsure say
625 prompt "Multi-core scheduler support"
628 Multi-core scheduler support improves the CPU scheduler's decision
629 making when dealing with multi-core CPU chips at a cost of slightly
630 increased overhead in some places. If unsure say N here.
632 source "kernel/Kconfig.preempt"
635 bool "Local APIC support on uniprocessors"
636 depends on X86_32 && !SMP && !(X86_VOYAGER || X86_GENERICARCH)
638 A local APIC (Advanced Programmable Interrupt Controller) is an
639 integrated interrupt controller in the CPU. If you have a single-CPU
640 system which has a processor with a local APIC, you can say Y here to
641 enable and use it. If you say Y here even though your machine doesn't
642 have a local APIC, then the kernel will still run with no slowdown at
643 all. The local APIC supports CPU-generated self-interrupts (timer,
644 performance counters), and the NMI watchdog which detects hard
648 bool "IO-APIC support on uniprocessors"
649 depends on X86_UP_APIC
651 An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an
652 SMP-capable replacement for PC-style interrupt controllers. Most
653 SMP systems and many recent uniprocessor systems have one.
655 If you have a single-CPU system with an IO-APIC, you can say Y here
656 to use it. If you say Y here even though your machine doesn't have
657 an IO-APIC, then the kernel will still run with no slowdown at all.
659 config X86_LOCAL_APIC
661 depends on X86_64 || (X86_32 && (X86_UP_APIC || (SMP && !X86_VOYAGER) || X86_GENERICARCH))
665 depends on X86_64 || (X86_32 && (X86_UP_IOAPIC || (SMP && !X86_VOYAGER) || X86_GENERICARCH))
667 config X86_VISWS_APIC
669 depends on X86_32 && X86_VISWS
672 bool "Machine Check Exception"
673 depends on !X86_VOYAGER
675 Machine Check Exception support allows the processor to notify the
676 kernel if it detects a problem (e.g. overheating, component failure).
677 The action the kernel takes depends on the severity of the problem,
678 ranging from a warning message on the console, to halting the machine.
679 Your processor must be a Pentium or newer to support this - check the
680 flags in /proc/cpuinfo for mce. Note that some older Pentium systems
681 have a design flaw which leads to false MCE events - hence MCE is
682 disabled on all P5 processors, unless explicitly enabled with "mce"
683 as a boot argument. Similarly, if MCE is built in and creates a
684 problem on some new non-standard machine, you can boot with "nomce"
685 to disable it. MCE support simply ignores non-MCE processors like
686 the 386 and 486, so nearly everyone can say Y here.
690 prompt "Intel MCE features"
691 depends on X86_64 && X86_MCE && X86_LOCAL_APIC
693 Additional support for intel specific MCE features such as
698 prompt "AMD MCE features"
699 depends on X86_64 && X86_MCE && X86_LOCAL_APIC
701 Additional support for AMD specific MCE features such as
702 the DRAM Error Threshold.
704 config X86_MCE_NONFATAL
705 tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
706 depends on X86_32 && X86_MCE
708 Enabling this feature starts a timer that triggers every 5 seconds which
709 will look at the machine check registers to see if anything happened.
710 Non-fatal problems automatically get corrected (but still logged).
711 Disable this if you don't want to see these messages.
712 Seeing the messages this option prints out may be indicative of dying
713 or out-of-spec (ie, overclocked) hardware.
714 This option only does something on certain CPUs.
715 (AMD Athlon/Duron and Intel Pentium 4)
717 config X86_MCE_P4THERMAL
718 bool "check for P4 thermal throttling interrupt."
719 depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP)
721 Enabling this feature will cause a message to be printed when the P4
722 enters thermal throttling.
725 bool "Enable VM86 support" if EMBEDDED
729 This option is required by programs like DOSEMU to run 16-bit legacy
730 code on X86 processors. It also may be needed by software like
731 XFree86 to initialize some video cards via BIOS. Disabling this
732 option saves about 6k.
735 tristate "Toshiba Laptop support"
738 This adds a driver to safely access the System Management Mode of
739 the CPU on Toshiba portables with a genuine Toshiba BIOS. It does
740 not work on models with a Phoenix BIOS. The System Management Mode
741 is used to set the BIOS and power saving options on Toshiba portables.
743 For information on utilities to make use of this driver see the
744 Toshiba Linux utilities web site at:
745 <http://www.buzzard.org.uk/toshiba/>.
747 Say Y if you intend to run this kernel on a Toshiba portable.
751 tristate "Dell laptop support"
753 This adds a driver to safely access the System Management Mode
754 of the CPU on the Dell Inspiron 8000. The System Management Mode
755 is used to read cpu temperature and cooling fan status and to
756 control the fans on the I8K portables.
758 This driver has been tested only on the Inspiron 8000 but it may
759 also work with other Dell laptops. You can force loading on other
760 models by passing the parameter `force=1' to the module. Use at
763 For information on utilities to make use of this driver see the
764 I8K Linux utilities web site at:
765 <http://people.debian.org/~dz/i8k/>
767 Say Y if you intend to run this kernel on a Dell Inspiron 8000.
770 config X86_REBOOTFIXUPS
772 prompt "Enable X86 board specific fixups for reboot"
773 depends on X86_32 && X86
775 This enables chipset and/or board specific fixups to be done
776 in order to get reboot to work correctly. This is only needed on
777 some combinations of hardware and BIOS. The symptom, for which
778 this config is intended, is when reboot ends with a stalled/hung
781 Currently, the only fixup is for the Geode machines using
782 CS5530A and CS5536 chipsets and the RDC R-321x SoC.
784 Say Y if you want to enable the fixup. Currently, it's safe to
785 enable this option even if you don't need it.
789 tristate "/dev/cpu/microcode - Intel IA32 CPU microcode support"
792 If you say Y here, you will be able to update the microcode on
793 Intel processors in the IA32 family, e.g. Pentium Pro, Pentium II,
794 Pentium III, Pentium 4, Xeon etc. You will obviously need the
795 actual microcode binary data itself which is not shipped with the
798 For latest news and information on obtaining all the required
799 ingredients for this driver, check:
800 <http://www.urbanmyth.org/microcode/>.
802 To compile this driver as a module, choose M here: the
803 module will be called microcode.
805 config MICROCODE_OLD_INTERFACE
810 tristate "/dev/cpu/*/msr - Model-specific register support"
812 This device gives privileged processes access to the x86
813 Model-Specific Registers (MSRs). It is a character device with
814 major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr.
815 MSR accesses are directed to a specific CPU on multi-processor
819 tristate "/dev/cpu/*/cpuid - CPU information support"
821 This device gives processes access to the x86 CPUID instruction to
822 be executed on a specific processor. It is a character device
823 with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
827 prompt "High Memory Support"
828 default HIGHMEM4G if !X86_NUMAQ
829 default HIGHMEM64G if X86_NUMAQ
834 depends on !X86_NUMAQ
836 Linux can use up to 64 Gigabytes of physical memory on x86 systems.
837 However, the address space of 32-bit x86 processors is only 4
838 Gigabytes large. That means that, if you have a large amount of
839 physical memory, not all of it can be "permanently mapped" by the
840 kernel. The physical memory that's not permanently mapped is called
843 If you are compiling a kernel which will never run on a machine with
844 more than 1 Gigabyte total physical RAM, answer "off" here (default
845 choice and suitable for most users). This will result in a "3GB/1GB"
846 split: 3GB are mapped so that each process sees a 3GB virtual memory
847 space and the remaining part of the 4GB virtual memory space is used
848 by the kernel to permanently map as much physical memory as
851 If the machine has between 1 and 4 Gigabytes physical RAM, then
854 If more than 4 Gigabytes is used then answer "64GB" here. This
855 selection turns Intel PAE (Physical Address Extension) mode on.
856 PAE implements 3-level paging on IA32 processors. PAE is fully
857 supported by Linux, PAE mode is implemented on all recent Intel
858 processors (Pentium Pro and better). NOTE: If you say "64GB" here,
859 then the kernel will not boot on CPUs that don't support PAE!
861 The actual amount of total physical memory will either be
862 auto detected or can be forced by using a kernel command line option
863 such as "mem=256M". (Try "man bootparam" or see the documentation of
864 your boot loader (lilo or loadlin) about how to pass options to the
865 kernel at boot time.)
867 If unsure, say "off".
871 depends on !X86_NUMAQ
873 Select this if you have a 32-bit processor and between 1 and 4
874 gigabytes of physical RAM.
878 depends on !M386 && !M486
881 Select this if you have a 32-bit processor and more than 4
882 gigabytes of physical RAM.
887 depends on EXPERIMENTAL
888 prompt "Memory split" if EMBEDDED
892 Select the desired split between kernel and user memory.
894 If the address range available to the kernel is less than the
895 physical memory installed, the remaining memory will be available
896 as "high memory". Accessing high memory is a little more costly
897 than low memory, as it needs to be mapped into the kernel first.
898 Note that increasing the kernel address space limits the range
899 available to user programs, making the address space there
900 tighter. Selecting anything other than the default 3G/1G split
901 will also likely make your kernel incompatible with binary-only
904 If you are not absolutely sure what you are doing, leave this
908 bool "3G/1G user/kernel split"
909 config VMSPLIT_3G_OPT
911 bool "3G/1G user/kernel split (for full 1G low memory)"
913 bool "2G/2G user/kernel split"
914 config VMSPLIT_2G_OPT
916 bool "2G/2G user/kernel split (for full 2G low memory)"
918 bool "1G/3G user/kernel split"
923 default 0xB0000000 if VMSPLIT_3G_OPT
924 default 0x80000000 if VMSPLIT_2G
925 default 0x78000000 if VMSPLIT_2G_OPT
926 default 0x40000000 if VMSPLIT_1G
932 depends on X86_32 && (HIGHMEM64G || HIGHMEM4G)
936 prompt "PAE (Physical Address Extension) Support"
937 depends on X86_32 && !HIGHMEM4G
938 select RESOURCES_64BIT
940 PAE is required for NX support, and furthermore enables
941 larger swapspace support for non-overcommit purposes. It
942 has the cost of more pagetable lookup overhead, and also
943 consumes more pagetable space per process.
945 # Common NUMA Features
947 bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
949 depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL)
951 default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
953 Enable NUMA (Non Uniform Memory Access) support.
954 The kernel will try to allocate memory used by a CPU on the
955 local memory controller of the CPU and add some more
956 NUMA awareness to the kernel.
958 For i386 this is currently highly experimental and should be only
959 used for kernel development. It might also cause boot failures.
960 For x86_64 this is recommended on all multiprocessor Opteron systems.
961 If the system is EM64T, you should say N unless your system is
964 comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
965 depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI)
969 prompt "Old style AMD Opteron NUMA detection"
970 depends on X86_64 && NUMA && PCI
972 Enable K8 NUMA node topology detection. You should say Y here if
973 you have a multi processor AMD K8 system. This uses an old
974 method to read the NUMA configuration directly from the builtin
975 Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
976 instead, which also takes priority if both are compiled in.
978 config X86_64_ACPI_NUMA
980 prompt "ACPI NUMA detection"
981 depends on X86_64 && NUMA && ACPI && PCI
984 Enable ACPI SRAT based node topology detection.
986 # Some NUMA nodes have memory ranges that span
987 # other nodes. Even though a pfn is valid and
988 # between a node's start and end pfns, it may not
989 # reside on that node. See memmap_init_zone()
991 config NODES_SPAN_OTHER_NODES
993 depends on X86_64_ACPI_NUMA
996 bool "NUMA emulation"
997 depends on X86_64 && NUMA
999 Enable NUMA emulation. A flat machine will be split
1000 into virtual nodes when booted with "numa=fake=N", where N is the
1001 number of nodes. This is only useful for debugging.
1012 int "Maximum NUMA Nodes (as a power of 2)"
1014 default "6" if X86_64
1015 default "4" if X86_NUMAQ
1017 depends on NEED_MULTIPLE_NODES
1019 Specify the maximum number of NUMA Nodes available on the target
1020 system. Increases memory reserved to accomodate various tables.
1023 config HAVE_ARCH_BOOTMEM_NODE
1025 depends on X86_32 && NUMA
1027 config ARCH_HAVE_MEMORY_PRESENT
1029 depends on X86_32 && DISCONTIGMEM
1031 config NEED_NODE_MEMMAP_SIZE
1033 depends on X86_32 && (DISCONTIGMEM || SPARSEMEM)
1035 config HAVE_ARCH_ALLOC_REMAP
1037 depends on X86_32 && NUMA
1039 config ARCH_FLATMEM_ENABLE
1041 depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && X86_PC && !NUMA
1043 config ARCH_DISCONTIGMEM_ENABLE
1045 depends on NUMA && X86_32
1047 config ARCH_DISCONTIGMEM_DEFAULT
1049 depends on NUMA && X86_32
1051 config ARCH_SPARSEMEM_DEFAULT
1055 config ARCH_SPARSEMEM_ENABLE
1057 depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC)
1058 select SPARSEMEM_STATIC if X86_32
1059 select SPARSEMEM_VMEMMAP_ENABLE if X86_64
1061 config ARCH_SELECT_MEMORY_MODEL
1063 depends on ARCH_SPARSEMEM_ENABLE
1065 config ARCH_MEMORY_PROBE
1067 depends on MEMORY_HOTPLUG
1072 bool "Allocate 3rd-level pagetables from highmem"
1073 depends on X86_32 && (HIGHMEM4G || HIGHMEM64G)
1075 The VM uses one page table entry for each page of physical memory.
1076 For systems with a lot of RAM, this can be wasteful of precious
1077 low memory. Setting this option will put user-space page table
1078 entries in high memory.
1080 config MATH_EMULATION
1082 prompt "Math emulation" if X86_32
1084 Linux can emulate a math coprocessor (used for floating point
1085 operations) if you don't have one. 486DX and Pentium processors have
1086 a math coprocessor built in, 486SX and 386 do not, unless you added
1087 a 487DX or 387, respectively. (The messages during boot time can
1088 give you some hints here ["man dmesg"].) Everyone needs either a
1089 coprocessor or this emulation.
1091 If you don't have a math coprocessor, you need to say Y here; if you
1092 say Y here even though you have a coprocessor, the coprocessor will
1093 be used nevertheless. (This behavior can be changed with the kernel
1094 command line option "no387", which comes handy if your coprocessor
1095 is broken. Try "man bootparam" or see the documentation of your boot
1096 loader (lilo or loadlin) about how to pass options to the kernel at
1097 boot time.) This means that it is a good idea to say Y here if you
1098 intend to use this kernel on different machines.
1100 More information about the internals of the Linux math coprocessor
1101 emulation can be found in <file:arch/x86/math-emu/README>.
1103 If you are not sure, say Y; apart from resulting in a 66 KB bigger
1104 kernel, it won't hurt.
1107 bool "MTRR (Memory Type Range Register) support"
1109 On Intel P6 family processors (Pentium Pro, Pentium II and later)
1110 the Memory Type Range Registers (MTRRs) may be used to control
1111 processor access to memory ranges. This is most useful if you have
1112 a video (VGA) card on a PCI or AGP bus. Enabling write-combining
1113 allows bus write transfers to be combined into a larger transfer
1114 before bursting over the PCI/AGP bus. This can increase performance
1115 of image write operations 2.5 times or more. Saying Y here creates a
1116 /proc/mtrr file which may be used to manipulate your processor's
1117 MTRRs. Typically the X server should use this.
1119 This code has a reasonably generic interface so that similar
1120 control registers on other processors can be easily supported
1123 The Cyrix 6x86, 6x86MX and M II processors have Address Range
1124 Registers (ARRs) which provide a similar functionality to MTRRs. For
1125 these, the ARRs are used to emulate the MTRRs.
1126 The AMD K6-2 (stepping 8 and above) and K6-3 processors have two
1127 MTRRs. The Centaur C6 (WinChip) has 8 MCRs, allowing
1128 write-combining. All of these processors are supported by this code
1129 and it makes sense to say Y here if you have one of them.
1131 Saying Y here also fixes a problem with buggy SMP BIOSes which only
1132 set the MTRRs for the boot CPU and not for the secondary CPUs. This
1133 can lead to all sorts of problems, so it's good to say Y here.
1135 You can safely say Y even if your machine doesn't have MTRRs, you'll
1136 just add about 9 KB to your kernel.
1138 See <file:Documentation/mtrr.txt> for more information.
1140 config MTRR_SANITIZER
1142 prompt "MTRR cleanup support"
1145 Convert MTRR layout from continuous to discrete, so X drivers can
1146 add writeback entries.
1148 Can be disabled with disable_mtrr_cleanup on the kernel command line.
1149 The largest mtrr entry size for a continous block can be set with
1154 config MTRR_SANITIZER_ENABLE_DEFAULT
1155 int "MTRR cleanup enable value (0-1)"
1158 depends on MTRR_SANITIZER
1160 Enable mtrr cleanup default value
1162 config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
1163 int "MTRR cleanup spare reg num (0-7)"
1166 depends on MTRR_SANITIZER
1168 mtrr cleanup spare entries default, it can be changed via
1169 mtrr_spare_reg_nr=N on the kernel command line.
1173 prompt "x86 PAT support"
1176 Use PAT attributes to setup page level cache control.
1178 PATs are the modern equivalents of MTRRs and are much more
1179 flexible than MTRRs.
1181 Say N here if you see bootup problems (boot crash, boot hang,
1182 spontaneous reboots) or a non-working video driver.
1188 prompt "EFI runtime service support"
1191 This enables the kernel to use EFI runtime services that are
1192 available (such as the EFI variable services).
1194 This option is only useful on systems that have EFI firmware.
1195 In addition, you should use the latest ELILO loader available
1196 at <http://elilo.sourceforge.net> in order to take advantage
1197 of EFI runtime services. However, even with this option, the
1198 resultant kernel should continue to boot on existing non-EFI
1203 prompt "Enable kernel irq balancing"
1204 depends on X86_32 && SMP && X86_IO_APIC
1206 The default yes will allow the kernel to do irq load balancing.
1207 Saying no will keep the kernel from doing irq load balancing.
1211 prompt "Enable seccomp to safely compute untrusted bytecode"
1214 This kernel feature is useful for number crunching applications
1215 that may need to compute untrusted bytecode during their
1216 execution. By using pipes or other transports made available to
1217 the process as file descriptors supporting the read/write
1218 syscalls, it's possible to isolate those applications in
1219 their own address space using seccomp. Once seccomp is
1220 enabled via /proc/<pid>/seccomp, it cannot be disabled
1221 and the task is only allowed to execute a few safe syscalls
1222 defined by each seccomp mode.
1224 If unsure, say Y. Only embedded should say N here.
1226 config CC_STACKPROTECTOR
1227 bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
1228 depends on X86_64 && EXPERIMENTAL && BROKEN
1230 This option turns on the -fstack-protector GCC feature. This
1231 feature puts, at the beginning of critical functions, a canary
1232 value on the stack just before the return address, and validates
1233 the value just before actually returning. Stack based buffer
1234 overflows (that need to overwrite this return address) now also
1235 overwrite the canary, which gets detected and the attack is then
1236 neutralized via a kernel panic.
1238 This feature requires gcc version 4.2 or above, or a distribution
1239 gcc with the feature backported. Older versions are automatically
1240 detected and for those versions, this configuration option is ignored.
1242 config CC_STACKPROTECTOR_ALL
1243 bool "Use stack-protector for all functions"
1244 depends on CC_STACKPROTECTOR
1246 Normally, GCC only inserts the canary value protection for
1247 functions that use large-ish on-stack buffers. By enabling
1248 this option, GCC will be asked to do this for ALL functions.
1250 source kernel/Kconfig.hz
1253 bool "kexec system call"
1254 depends on X86_BIOS_REBOOT
1256 kexec is a system call that implements the ability to shutdown your
1257 current kernel, and to start another kernel. It is like a reboot
1258 but it is independent of the system firmware. And like a reboot
1259 you can start any kernel with it, not just Linux.
1261 The name comes from the similarity to the exec system call.
1263 It is an ongoing process to be certain the hardware in a machine
1264 is properly shutdown, so do not be surprised if this code does not
1265 initially work for you. It may help to enable device hotplugging
1266 support. As of this writing the exact hardware interface is
1267 strongly in flux, so no good recommendation can be made.
1270 bool "kernel crash dumps (EXPERIMENTAL)"
1271 depends on X86_64 || (X86_32 && HIGHMEM)
1273 Generate crash dump after being started by kexec.
1274 This should be normally only set in special crash dump kernels
1275 which are loaded in the main kernel with kexec-tools into
1276 a specially reserved region and then later executed after
1277 a crash by kdump/kexec. The crash dump kernel must be compiled
1278 to a memory address not used by the main kernel or BIOS using
1279 PHYSICAL_START, or it must be built as a relocatable image
1280 (CONFIG_RELOCATABLE=y).
1281 For more details see Documentation/kdump/kdump.txt
1284 bool "kexec jump (EXPERIMENTAL)"
1285 depends on EXPERIMENTAL
1286 depends on KEXEC && HIBERNATION && X86_32
1288 Jump between original kernel and kexeced kernel and invoke
1289 code in physical address mode via KEXEC
1291 config PHYSICAL_START
1292 hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
1293 default "0x1000000" if X86_NUMAQ
1294 default "0x200000" if X86_64
1297 This gives the physical address where the kernel is loaded.
1299 If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
1300 bzImage will decompress itself to above physical address and
1301 run from there. Otherwise, bzImage will run from the address where
1302 it has been loaded by the boot loader and will ignore above physical
1305 In normal kdump cases one does not have to set/change this option
1306 as now bzImage can be compiled as a completely relocatable image
1307 (CONFIG_RELOCATABLE=y) and be used to load and run from a different
1308 address. This option is mainly useful for the folks who don't want
1309 to use a bzImage for capturing the crash dump and want to use a
1310 vmlinux instead. vmlinux is not relocatable hence a kernel needs
1311 to be specifically compiled to run from a specific memory area
1312 (normally a reserved region) and this option comes handy.
1314 So if you are using bzImage for capturing the crash dump, leave
1315 the value here unchanged to 0x100000 and set CONFIG_RELOCATABLE=y.
1316 Otherwise if you plan to use vmlinux for capturing the crash dump
1317 change this value to start of the reserved region (Typically 16MB
1318 0x1000000). In other words, it can be set based on the "X" value as
1319 specified in the "crashkernel=YM@XM" command line boot parameter
1320 passed to the panic-ed kernel. Typically this parameter is set as
1321 crashkernel=64M@16M. Please take a look at
1322 Documentation/kdump/kdump.txt for more details about crash dumps.
1324 Usage of bzImage for capturing the crash dump is recommended as
1325 one does not have to build two kernels. Same kernel can be used
1326 as production kernel and capture kernel. Above option should have
1327 gone away after relocatable bzImage support is introduced. But it
1328 is present because there are users out there who continue to use
1329 vmlinux for dump capture. This option should go away down the
1332 Don't change this unless you know what you are doing.
1335 bool "Build a relocatable kernel (EXPERIMENTAL)"
1336 depends on EXPERIMENTAL
1338 This builds a kernel image that retains relocation information
1339 so it can be loaded someplace besides the default 1MB.
1340 The relocations tend to make the kernel binary about 10% larger,
1341 but are discarded at runtime.
1343 One use is for the kexec on panic case where the recovery kernel
1344 must live at a different physical address than the primary
1347 Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
1348 it has been loaded at and the compile time physical address
1349 (CONFIG_PHYSICAL_START) is ignored.
1351 config PHYSICAL_ALIGN
1353 prompt "Alignment value to which kernel should be aligned" if X86_32
1354 default "0x100000" if X86_32
1355 default "0x200000" if X86_64
1356 range 0x2000 0x400000
1358 This value puts the alignment restrictions on physical address
1359 where kernel is loaded and run from. Kernel is compiled for an
1360 address which meets above alignment restriction.
1362 If bootloader loads the kernel at a non-aligned address and
1363 CONFIG_RELOCATABLE is set, kernel will move itself to nearest
1364 address aligned to above value and run from there.
1366 If bootloader loads the kernel at a non-aligned address and
1367 CONFIG_RELOCATABLE is not set, kernel will ignore the run time
1368 load address and decompress itself to the address it has been
1369 compiled for and run from there. The address for which kernel is
1370 compiled already meets above alignment restrictions. Hence the
1371 end result is that kernel runs from a physical address meeting
1372 above alignment restrictions.
1374 Don't change this unless you know what you are doing.
1377 bool "Support for suspend on SMP and hot-pluggable CPUs (EXPERIMENTAL)"
1378 depends on SMP && HOTPLUG && EXPERIMENTAL && !X86_VOYAGER
1380 Say Y here to experiment with turning CPUs off and on, and to
1381 enable suspend on SMP systems. CPUs can be controlled through
1382 /sys/devices/system/cpu.
1383 Say N if you want to disable CPU hotplug and don't need to
1388 prompt "Compat VDSO support"
1389 depends on X86_32 || IA32_EMULATION
1391 Map the 32-bit VDSO to the predictable old-style address too.
1393 Say N here if you are running a sufficiently recent glibc
1394 version (2.3.3 or later), to remove the high-mapped
1395 VDSO mapping and to exclusively use the randomized VDSO.
1401 config ARCH_ENABLE_MEMORY_HOTPLUG
1403 depends on X86_64 || (X86_32 && HIGHMEM)
1405 config HAVE_ARCH_EARLY_PFN_TO_NID
1409 menu "Power management options"
1410 depends on !X86_VOYAGER
1412 config ARCH_HIBERNATION_HEADER
1414 depends on X86_64 && HIBERNATION
1416 source "kernel/power/Kconfig"
1418 source "drivers/acpi/Kconfig"
1423 depends on APM || APM_MODULE
1426 tristate "APM (Advanced Power Management) BIOS support"
1427 depends on X86_32 && PM_SLEEP
1429 APM is a BIOS specification for saving power using several different
1430 techniques. This is mostly useful for battery powered laptops with
1431 APM compliant BIOSes. If you say Y here, the system time will be
1432 reset after a RESUME operation, the /proc/apm device will provide
1433 battery status information, and user-space programs will receive
1434 notification of APM "events" (e.g. battery status change).
1436 If you select "Y" here, you can disable actual use of the APM
1437 BIOS by passing the "apm=off" option to the kernel at boot time.
1439 Note that the APM support is almost completely disabled for
1440 machines with more than one CPU.
1442 In order to use APM, you will need supporting software. For location
1443 and more information, read <file:Documentation/power/pm.txt> and the
1444 Battery Powered Linux mini-HOWTO, available from
1445 <http://www.tldp.org/docs.html#howto>.
1447 This driver does not spin down disk drives (see the hdparm(8)
1448 manpage ("man 8 hdparm") for that), and it doesn't turn off
1449 VESA-compliant "green" monitors.
1451 This driver does not support the TI 4000M TravelMate and the ACER
1452 486/DX4/75 because they don't have compliant BIOSes. Many "green"
1453 desktop machines also don't have compliant BIOSes, and this driver
1454 may cause those machines to panic during the boot phase.
1456 Generally, if you don't have a battery in your machine, there isn't
1457 much point in using this driver and you should say N. If you get
1458 random kernel OOPSes or reboots that don't seem to be related to
1459 anything, try disabling/enabling this option (or disabling/enabling
1462 Some other things you should try when experiencing seemingly random,
1465 1) make sure that you have enough swap space and that it is
1467 2) pass the "no-hlt" option to the kernel
1468 3) switch on floating point emulation in the kernel and pass
1469 the "no387" option to the kernel
1470 4) pass the "floppy=nodma" option to the kernel
1471 5) pass the "mem=4M" option to the kernel (thereby disabling
1472 all but the first 4 MB of RAM)
1473 6) make sure that the CPU is not over clocked.
1474 7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
1475 8) disable the cache from your BIOS settings
1476 9) install a fan for the video card or exchange video RAM
1477 10) install a better fan for the CPU
1478 11) exchange RAM chips
1479 12) exchange the motherboard.
1481 To compile this driver as a module, choose M here: the
1482 module will be called apm.
1486 config APM_IGNORE_USER_SUSPEND
1487 bool "Ignore USER SUSPEND"
1489 This option will ignore USER SUSPEND requests. On machines with a
1490 compliant APM BIOS, you want to say N. However, on the NEC Versa M
1491 series notebooks, it is necessary to say Y because of a BIOS bug.
1493 config APM_DO_ENABLE
1494 bool "Enable PM at boot time"
1496 Enable APM features at boot time. From page 36 of the APM BIOS
1497 specification: "When disabled, the APM BIOS does not automatically
1498 power manage devices, enter the Standby State, enter the Suspend
1499 State, or take power saving steps in response to CPU Idle calls."
1500 This driver will make CPU Idle calls when Linux is idle (unless this
1501 feature is turned off -- see "Do CPU IDLE calls", below). This
1502 should always save battery power, but more complicated APM features
1503 will be dependent on your BIOS implementation. You may need to turn
1504 this option off if your computer hangs at boot time when using APM
1505 support, or if it beeps continuously instead of suspending. Turn
1506 this off if you have a NEC UltraLite Versa 33/C or a Toshiba
1507 T400CDT. This is off by default since most machines do fine without
1511 bool "Make CPU Idle calls when idle"
1513 Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop.
1514 On some machines, this can activate improved power savings, such as
1515 a slowed CPU clock rate, when the machine is idle. These idle calls
1516 are made after the idle loop has run for some length of time (e.g.,
1517 333 mS). On some machines, this will cause a hang at boot time or
1518 whenever the CPU becomes idle. (On machines with more than one CPU,
1519 this option does nothing.)
1521 config APM_DISPLAY_BLANK
1522 bool "Enable console blanking using APM"
1524 Enable console blanking using the APM. Some laptops can use this to
1525 turn off the LCD backlight when the screen blanker of the Linux
1526 virtual console blanks the screen. Note that this is only used by
1527 the virtual console screen blanker, and won't turn off the backlight
1528 when using the X Window system. This also doesn't have anything to
1529 do with your VESA-compliant power-saving monitor. Further, this
1530 option doesn't work for all laptops -- it might not turn off your
1531 backlight at all, or it might print a lot of errors to the console,
1532 especially if you are using gpm.
1534 config APM_ALLOW_INTS
1535 bool "Allow interrupts during APM BIOS calls"
1537 Normally we disable external interrupts while we are making calls to
1538 the APM BIOS as a measure to lessen the effects of a badly behaving
1539 BIOS implementation. The BIOS should reenable interrupts if it
1540 needs to. Unfortunately, some BIOSes do not -- especially those in
1541 many of the newer IBM Thinkpads. If you experience hangs when you
1542 suspend, try setting this to Y. Otherwise, say N.
1544 config APM_REAL_MODE_POWER_OFF
1545 bool "Use real mode APM BIOS call to power off"
1547 Use real mode APM BIOS calls to switch off the computer. This is
1548 a work-around for a number of buggy BIOSes. Switch this option on if
1549 your computer crashes instead of powering off properly.
1553 source "arch/x86/kernel/cpu/cpufreq/Kconfig"
1555 source "drivers/cpuidle/Kconfig"
1560 menu "Bus options (PCI etc.)"
1565 select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
1567 Find out whether you have a PCI motherboard. PCI is the name of a
1568 bus system, i.e. the way the CPU talks to the other stuff inside
1569 your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
1570 VESA. If you have PCI, say Y, otherwise N.
1573 prompt "PCI access mode"
1574 depends on X86_32 && PCI
1577 On PCI systems, the BIOS can be used to detect the PCI devices and
1578 determine their configuration. However, some old PCI motherboards
1579 have BIOS bugs and may crash if this is done. Also, some embedded
1580 PCI-based systems don't have any BIOS at all. Linux can also try to
1581 detect the PCI hardware directly without using the BIOS.
1583 With this option, you can specify how Linux should detect the
1584 PCI devices. If you choose "BIOS", the BIOS will be used,
1585 if you choose "Direct", the BIOS won't be used, and if you
1586 choose "MMConfig", then PCI Express MMCONFIG will be used.
1587 If you choose "Any", the kernel will try MMCONFIG, then the
1588 direct access method and falls back to the BIOS if that doesn't
1589 work. If unsure, go with the default, which is "Any".
1594 config PCI_GOMMCONFIG
1611 depends on X86_32 && PCI && (PCI_GOBIOS || PCI_GOANY)
1613 # x86-64 doesn't support PCI BIOS access from long mode so always go direct.
1616 depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC))
1620 depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
1624 depends on PCI && OLPC && (PCI_GOOLPC || PCI_GOANY)
1631 bool "Support mmconfig PCI config space access"
1632 depends on X86_64 && PCI && ACPI
1635 bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
1636 depends on X86_64 && PCI_MSI && ACPI && EXPERIMENTAL
1638 DMA remapping (DMAR) devices support enables independent address
1639 translations for Direct Memory Access (DMA) from devices.
1640 These DMA remapping devices are reported via ACPI tables
1641 and include PCI device scope covered by these DMA
1646 prompt "Support for Graphics workaround"
1649 Current Graphics drivers tend to use physical address
1650 for DMA and avoid using DMA APIs. Setting this config
1651 option permits the IOMMU driver to set a unity map for
1652 all the OS-visible memory. Hence the driver can continue
1653 to use physical addresses for DMA.
1655 config DMAR_FLOPPY_WA
1659 Floppy disk drivers are know to bypass DMA API calls
1660 thereby failing to work when IOMMU is enabled. This
1661 workaround will setup a 1:1 mapping for the first
1662 16M to make floppy (an ISA device) work.
1664 source "drivers/pci/pcie/Kconfig"
1666 source "drivers/pci/Kconfig"
1668 # x86_64 have no ISA slots, but do have ISA-style DMA.
1676 depends on !X86_VOYAGER
1678 Find out whether you have ISA slots on your motherboard. ISA is the
1679 name of a bus system, i.e. the way the CPU talks to the other stuff
1680 inside your box. Other bus systems are PCI, EISA, MicroChannel
1681 (MCA) or VESA. ISA is an older system, now being displaced by PCI;
1682 newer boards don't support it. If you have ISA, say Y, otherwise N.
1688 The Extended Industry Standard Architecture (EISA) bus was
1689 developed as an open alternative to the IBM MicroChannel bus.
1691 The EISA bus provided some of the features of the IBM MicroChannel
1692 bus while maintaining backward compatibility with cards made for
1693 the older ISA bus. The EISA bus saw limited use between 1988 and
1694 1995 when it was made obsolete by the PCI bus.
1696 Say Y here if you are building a kernel for an EISA-based machine.
1700 source "drivers/eisa/Kconfig"
1703 bool "MCA support" if !X86_VOYAGER
1704 default y if X86_VOYAGER
1706 MicroChannel Architecture is found in some IBM PS/2 machines and
1707 laptops. It is a bus system similar to PCI or ISA. See
1708 <file:Documentation/mca.txt> (and especially the web page given
1709 there) before attempting to build an MCA bus kernel.
1711 source "drivers/mca/Kconfig"
1714 tristate "NatSemi SCx200 support"
1715 depends on !X86_VOYAGER
1717 This provides basic support for National Semiconductor's
1718 (now AMD's) Geode processors. The driver probes for the
1719 PCI-IDs of several on-chip devices, so its a good dependency
1720 for other scx200_* drivers.
1722 If compiled as a module, the driver is named scx200.
1724 config SCx200HR_TIMER
1725 tristate "NatSemi SCx200 27MHz High-Resolution Timer Support"
1726 depends on SCx200 && GENERIC_TIME
1729 This driver provides a clocksource built upon the on-chip
1730 27MHz high-resolution timer. Its also a workaround for
1731 NSC Geode SC-1100's buggy TSC, which loses time when the
1732 processor goes idle (as is done by the scheduler). The
1733 other workaround is idle=poll boot option.
1735 config GEODE_MFGPT_TIMER
1737 prompt "Geode Multi-Function General Purpose Timer (MFGPT) events"
1738 depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS
1740 This driver provides a clock event source based on the MFGPT
1741 timer(s) in the CS5535 and CS5536 companion chip for the geode.
1742 MFGPTs have a better resolution and max interval than the
1743 generic PIT, and are suitable for use as high-res timers.
1746 bool "One Laptop Per Child support"
1749 Add support for detecting the unique features of the OLPC
1756 depends on AGP_AMD64 || (X86_64 && (GART_IOMMU || (PCI && NUMA)))
1758 source "drivers/pcmcia/Kconfig"
1760 source "drivers/pci/hotplug/Kconfig"
1765 menu "Executable file formats / Emulations"
1767 source "fs/Kconfig.binfmt"
1769 config IA32_EMULATION
1770 bool "IA32 Emulation"
1772 select COMPAT_BINFMT_ELF
1774 Include code to run 32-bit programs under a 64-bit kernel. You should
1775 likely turn this on, unless you're 100% sure that you don't have any
1776 32-bit programs left.
1779 tristate "IA32 a.out support"
1780 depends on IA32_EMULATION && ARCH_SUPPORTS_AOUT
1782 Support old a.out binaries in the 32bit emulation.
1786 depends on IA32_EMULATION
1788 config COMPAT_FOR_U64_ALIGNMENT
1792 config SYSVIPC_COMPAT
1794 depends on X86_64 && COMPAT && SYSVIPC
1799 source "net/Kconfig"
1801 source "drivers/Kconfig"
1803 source "drivers/firmware/Kconfig"
1807 source "arch/x86/Kconfig.debug"
1809 source "security/Kconfig"
1811 source "crypto/Kconfig"
1813 source "arch/x86/kvm/Kconfig"
1815 source "lib/Kconfig"