2 * Copyright (C) 2007-2008 Advanced Micro Devices, Inc.
3 * Author: Joerg Roedel <joerg.roedel@amd.com>
4 * Leo Duran <leo.duran@amd.com>
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 #include <linux/pci.h>
21 #include <linux/acpi.h>
22 #include <linux/gfp.h>
23 #include <linux/list.h>
24 #include <linux/sysdev.h>
25 #include <asm/pci-direct.h>
26 #include <asm/amd_iommu_types.h>
27 #include <asm/amd_iommu.h>
31 * definitions for the ACPI scanning code
33 #define PCI_BUS(x) (((x) >> 8) & 0xff)
34 #define IVRS_HEADER_LENGTH 48
36 #define ACPI_IVHD_TYPE 0x10
37 #define ACPI_IVMD_TYPE_ALL 0x20
38 #define ACPI_IVMD_TYPE 0x21
39 #define ACPI_IVMD_TYPE_RANGE 0x22
41 #define IVHD_DEV_ALL 0x01
42 #define IVHD_DEV_SELECT 0x02
43 #define IVHD_DEV_SELECT_RANGE_START 0x03
44 #define IVHD_DEV_RANGE_END 0x04
45 #define IVHD_DEV_ALIAS 0x42
46 #define IVHD_DEV_ALIAS_RANGE 0x43
47 #define IVHD_DEV_EXT_SELECT 0x46
48 #define IVHD_DEV_EXT_SELECT_RANGE 0x47
50 #define IVHD_FLAG_HT_TUN_EN 0x00
51 #define IVHD_FLAG_PASSPW_EN 0x01
52 #define IVHD_FLAG_RESPASSPW_EN 0x02
53 #define IVHD_FLAG_ISOC_EN 0x03
55 #define IVMD_FLAG_EXCL_RANGE 0x08
56 #define IVMD_FLAG_UNITY_MAP 0x01
58 #define ACPI_DEVFLAG_INITPASS 0x01
59 #define ACPI_DEVFLAG_EXTINT 0x02
60 #define ACPI_DEVFLAG_NMI 0x04
61 #define ACPI_DEVFLAG_SYSMGT1 0x10
62 #define ACPI_DEVFLAG_SYSMGT2 0x20
63 #define ACPI_DEVFLAG_LINT0 0x40
64 #define ACPI_DEVFLAG_LINT1 0x80
65 #define ACPI_DEVFLAG_ATSDIS 0x10000000
68 * ACPI table definitions
70 * These data structures are laid over the table to parse the important values
75 * structure describing one IOMMU in the ACPI table. Typically followed by one
76 * or more ivhd_entrys.
88 } __attribute__((packed));
91 * A device entry describing which devices a specific IOMMU translates and
92 * which requestor ids they use.
99 } __attribute__((packed));
102 * An AMD IOMMU memory definition structure. It defines things like exclusion
103 * ranges for devices and regions that should be unity mapped.
114 } __attribute__((packed));
116 static int __initdata amd_iommu_detected;
118 u16 amd_iommu_last_bdf; /* largest PCI device id we have
120 LIST_HEAD(amd_iommu_unity_map); /* a list of required unity mappings
122 unsigned amd_iommu_aperture_order = 26; /* size of aperture in power of 2 */
123 int amd_iommu_isolate; /* if 1, device isolation is enabled */
125 LIST_HEAD(amd_iommu_list); /* list of all AMD IOMMUs in the
129 * Pointer to the device table which is shared by all AMD IOMMUs
130 * it is indexed by the PCI device id or the HT unit id and contains
131 * information about the domain the device belongs to as well as the
132 * page table root pointer.
134 struct dev_table_entry *amd_iommu_dev_table;
137 * The alias table is a driver specific data structure which contains the
138 * mappings of the PCI device ids to the actual requestor ids on the IOMMU.
139 * More than one device can share the same requestor id.
141 u16 *amd_iommu_alias_table;
144 * The rlookup table is used to find the IOMMU which is responsible
145 * for a specific device. It is also indexed by the PCI device id.
147 struct amd_iommu **amd_iommu_rlookup_table;
150 * The pd table (protection domain table) is used to find the protection domain
151 * data structure a device belongs to. Indexed with the PCI device id too.
153 struct protection_domain **amd_iommu_pd_table;
156 * AMD IOMMU allows up to 2^16 differend protection domains. This is a bitmap
157 * to know which ones are already in use.
159 unsigned long *amd_iommu_pd_alloc_bitmap;
161 static u32 dev_table_size; /* size of the device table */
162 static u32 alias_table_size; /* size of the alias table */
163 static u32 rlookup_table_size; /* size if the rlookup table */
165 static inline void update_last_devid(u16 devid)
167 if (devid > amd_iommu_last_bdf)
168 amd_iommu_last_bdf = devid;
171 static inline unsigned long tbl_size(int entry_size)
173 unsigned shift = PAGE_SHIFT +
174 get_order(amd_iommu_last_bdf * entry_size);
179 /****************************************************************************
181 * AMD IOMMU MMIO register space handling functions
183 * These functions are used to program the IOMMU device registers in
184 * MMIO space required for that driver.
186 ****************************************************************************/
189 * This function set the exclusion range in the IOMMU. DMA accesses to the
190 * exclusion range are passed through untranslated
192 static void __init iommu_set_exclusion_range(struct amd_iommu *iommu)
194 u64 start = iommu->exclusion_start & PAGE_MASK;
195 u64 limit = (start + iommu->exclusion_length) & PAGE_MASK;
198 if (!iommu->exclusion_start)
201 entry = start | MMIO_EXCL_ENABLE_MASK;
202 memcpy_toio(iommu->mmio_base + MMIO_EXCL_BASE_OFFSET,
203 &entry, sizeof(entry));
206 memcpy_toio(iommu->mmio_base + MMIO_EXCL_LIMIT_OFFSET,
207 &entry, sizeof(entry));
210 /* Programs the physical address of the device table into the IOMMU hardware */
211 static void __init iommu_set_device_table(struct amd_iommu *iommu)
215 BUG_ON(iommu->mmio_base == NULL);
217 entry = virt_to_phys(amd_iommu_dev_table);
218 entry |= (dev_table_size >> 12) - 1;
219 memcpy_toio(iommu->mmio_base + MMIO_DEV_TABLE_OFFSET,
220 &entry, sizeof(entry));
223 /* Generic functions to enable/disable certain features of the IOMMU. */
224 static void __init iommu_feature_enable(struct amd_iommu *iommu, u8 bit)
228 ctrl = readl(iommu->mmio_base + MMIO_CONTROL_OFFSET);
230 writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
233 static void __init iommu_feature_disable(struct amd_iommu *iommu, u8 bit)
237 ctrl = (u64)readl(iommu->mmio_base + MMIO_CONTROL_OFFSET);
239 writel(ctrl, iommu->mmio_base + MMIO_CONTROL_OFFSET);
242 /* Function to enable the hardware */
243 void __init iommu_enable(struct amd_iommu *iommu)
245 printk(KERN_INFO "AMD IOMMU: Enabling IOMMU at ");
246 print_devid(iommu->devid, 0);
247 printk(" cap 0x%hx\n", iommu->cap_ptr);
249 iommu_feature_enable(iommu, CONTROL_IOMMU_EN);
253 * mapping and unmapping functions for the IOMMU MMIO space. Each AMD IOMMU in
254 * the system has one.
256 static u8 * __init iommu_map_mmio_space(u64 address)
260 if (!request_mem_region(address, MMIO_REGION_LENGTH, "amd_iommu"))
263 ret = ioremap_nocache(address, MMIO_REGION_LENGTH);
267 release_mem_region(address, MMIO_REGION_LENGTH);
272 static void __init iommu_unmap_mmio_space(struct amd_iommu *iommu)
274 if (iommu->mmio_base)
275 iounmap(iommu->mmio_base);
276 release_mem_region(iommu->mmio_phys, MMIO_REGION_LENGTH);
279 /****************************************************************************
281 * The functions below belong to the first pass of AMD IOMMU ACPI table
282 * parsing. In this pass we try to find out the highest device id this
283 * code has to handle. Upon this information the size of the shared data
284 * structures is determined later.
286 ****************************************************************************/
289 * This function reads the last device id the IOMMU has to handle from the PCI
290 * capability header for this IOMMU
292 static int __init find_last_devid_on_pci(int bus, int dev, int fn, int cap_ptr)
296 cap = read_pci_config(bus, dev, fn, cap_ptr+MMIO_RANGE_OFFSET);
297 update_last_devid(calc_devid(MMIO_GET_BUS(cap), MMIO_GET_LD(cap)));
303 * After reading the highest device id from the IOMMU PCI capability header
304 * this function looks if there is a higher device id defined in the ACPI table
306 static int __init find_last_devid_from_ivhd(struct ivhd_header *h)
308 u8 *p = (void *)h, *end = (void *)h;
309 struct ivhd_entry *dev;
314 find_last_devid_on_pci(PCI_BUS(h->devid),
320 dev = (struct ivhd_entry *)p;
322 case IVHD_DEV_SELECT:
323 case IVHD_DEV_RANGE_END:
325 case IVHD_DEV_EXT_SELECT:
326 /* all the above subfield types refer to device ids */
327 update_last_devid(dev->devid);
332 p += 0x04 << (*p >> 6);
341 * Iterate over all IVHD entries in the ACPI table and find the highest device
342 * id which we need to handle. This is the first of three functions which parse
343 * the ACPI table. So we check the checksum here.
345 static int __init find_last_devid_acpi(struct acpi_table_header *table)
348 u8 checksum = 0, *p = (u8 *)table, *end = (u8 *)table;
349 struct ivhd_header *h;
352 * Validate checksum here so we don't need to do it when
353 * we actually parse the table
355 for (i = 0; i < table->length; ++i)
358 /* ACPI table corrupt */
361 p += IVRS_HEADER_LENGTH;
363 end += table->length;
365 h = (struct ivhd_header *)p;
368 find_last_devid_from_ivhd(h);
380 /****************************************************************************
382 * The following functions belong the the code path which parses the ACPI table
383 * the second time. In this ACPI parsing iteration we allocate IOMMU specific
384 * data structures, initialize the device/alias/rlookup table and also
385 * basically initialize the hardware.
387 ****************************************************************************/
390 * Allocates the command buffer. This buffer is per AMD IOMMU. We can
391 * write commands to that buffer later and the IOMMU will execute them
394 static u8 * __init alloc_command_buffer(struct amd_iommu *iommu)
396 u8 *cmd_buf = (u8 *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
397 get_order(CMD_BUFFER_SIZE));
403 iommu->cmd_buf_size = CMD_BUFFER_SIZE;
405 entry = (u64)virt_to_phys(cmd_buf);
406 entry |= MMIO_CMD_SIZE_512;
407 memcpy_toio(iommu->mmio_base + MMIO_CMD_BUF_OFFSET,
408 &entry, sizeof(entry));
410 iommu_feature_enable(iommu, CONTROL_CMDBUF_EN);
415 static void __init free_command_buffer(struct amd_iommu *iommu)
417 free_pages((unsigned long)iommu->cmd_buf, get_order(CMD_BUFFER_SIZE));
420 /* sets a specific bit in the device table entry. */
421 static void set_dev_entry_bit(u16 devid, u8 bit)
423 int i = (bit >> 5) & 0x07;
424 int _bit = bit & 0x1f;
426 amd_iommu_dev_table[devid].data[i] |= (1 << _bit);
430 * This function takes the device specific flags read from the ACPI
431 * table and sets up the device table entry with that information
433 static void __init set_dev_entry_from_acpi(u16 devid, u32 flags, u32 ext_flags)
435 if (flags & ACPI_DEVFLAG_INITPASS)
436 set_dev_entry_bit(devid, DEV_ENTRY_INIT_PASS);
437 if (flags & ACPI_DEVFLAG_EXTINT)
438 set_dev_entry_bit(devid, DEV_ENTRY_EINT_PASS);
439 if (flags & ACPI_DEVFLAG_NMI)
440 set_dev_entry_bit(devid, DEV_ENTRY_NMI_PASS);
441 if (flags & ACPI_DEVFLAG_SYSMGT1)
442 set_dev_entry_bit(devid, DEV_ENTRY_SYSMGT1);
443 if (flags & ACPI_DEVFLAG_SYSMGT2)
444 set_dev_entry_bit(devid, DEV_ENTRY_SYSMGT2);
445 if (flags & ACPI_DEVFLAG_LINT0)
446 set_dev_entry_bit(devid, DEV_ENTRY_LINT0_PASS);
447 if (flags & ACPI_DEVFLAG_LINT1)
448 set_dev_entry_bit(devid, DEV_ENTRY_LINT1_PASS);
451 /* Writes the specific IOMMU for a device into the rlookup table */
452 static void __init set_iommu_for_device(struct amd_iommu *iommu, u16 devid)
454 amd_iommu_rlookup_table[devid] = iommu;
458 * Reads the device exclusion range from ACPI and initialize IOMMU with
461 static void __init set_device_exclusion_range(u16 devid, struct ivmd_header *m)
463 struct amd_iommu *iommu = amd_iommu_rlookup_table[devid];
465 if (!(m->flags & IVMD_FLAG_EXCL_RANGE))
470 * We only can configure exclusion ranges per IOMMU, not
471 * per device. But we can enable the exclusion range per
472 * device. This is done here
474 set_dev_entry_bit(m->devid, DEV_ENTRY_EX);
475 iommu->exclusion_start = m->range_start;
476 iommu->exclusion_length = m->range_length;
481 * This function reads some important data from the IOMMU PCI space and
482 * initializes the driver data structure with it. It reads the hardware
483 * capabilities and the first/last device entries
485 static void __init init_iommu_from_pci(struct amd_iommu *iommu)
487 int bus = PCI_BUS(iommu->devid);
488 int dev = PCI_SLOT(iommu->devid);
489 int fn = PCI_FUNC(iommu->devid);
490 int cap_ptr = iommu->cap_ptr;
493 iommu->cap = read_pci_config(bus, dev, fn, cap_ptr+MMIO_CAP_HDR_OFFSET);
495 range = read_pci_config(bus, dev, fn, cap_ptr+MMIO_RANGE_OFFSET);
496 iommu->first_device = calc_devid(MMIO_GET_BUS(range),
498 iommu->last_device = calc_devid(MMIO_GET_BUS(range),
503 * Takes a pointer to an AMD IOMMU entry in the ACPI table and
504 * initializes the hardware and our data structures with it.
506 static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
507 struct ivhd_header *h)
510 u8 *end = p, flags = 0;
511 u16 dev_i, devid = 0, devid_start = 0, devid_to = 0;
514 struct ivhd_entry *e;
517 * First set the recommended feature enable bits from ACPI
518 * into the IOMMU control registers
520 h->flags & IVHD_FLAG_HT_TUN_EN ?
521 iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) :
522 iommu_feature_disable(iommu, CONTROL_HT_TUN_EN);
524 h->flags & IVHD_FLAG_PASSPW_EN ?
525 iommu_feature_enable(iommu, CONTROL_PASSPW_EN) :
526 iommu_feature_disable(iommu, CONTROL_PASSPW_EN);
528 h->flags & IVHD_FLAG_RESPASSPW_EN ?
529 iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) :
530 iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN);
532 h->flags & IVHD_FLAG_ISOC_EN ?
533 iommu_feature_enable(iommu, CONTROL_ISOC_EN) :
534 iommu_feature_disable(iommu, CONTROL_ISOC_EN);
537 * make IOMMU memory accesses cache coherent
539 iommu_feature_enable(iommu, CONTROL_COHERENT_EN);
542 * Done. Now parse the device entries
544 p += sizeof(struct ivhd_header);
548 e = (struct ivhd_entry *)p;
551 for (dev_i = iommu->first_device;
552 dev_i <= iommu->last_device; ++dev_i)
553 set_dev_entry_from_acpi(dev_i, e->flags, 0);
555 case IVHD_DEV_SELECT:
557 set_dev_entry_from_acpi(devid, e->flags, 0);
559 case IVHD_DEV_SELECT_RANGE_START:
560 devid_start = e->devid;
567 devid_to = e->ext >> 8;
568 set_dev_entry_from_acpi(devid, e->flags, 0);
569 amd_iommu_alias_table[devid] = devid_to;
571 case IVHD_DEV_ALIAS_RANGE:
572 devid_start = e->devid;
574 devid_to = e->ext >> 8;
578 case IVHD_DEV_EXT_SELECT:
580 set_dev_entry_from_acpi(devid, e->flags, e->ext);
582 case IVHD_DEV_EXT_SELECT_RANGE:
583 devid_start = e->devid;
588 case IVHD_DEV_RANGE_END:
590 for (dev_i = devid_start; dev_i <= devid; ++dev_i) {
592 amd_iommu_alias_table[dev_i] = devid_to;
593 set_dev_entry_from_acpi(
594 amd_iommu_alias_table[dev_i],
602 p += 0x04 << (e->type >> 6);
606 /* Initializes the device->iommu mapping for the driver */
607 static int __init init_iommu_devices(struct amd_iommu *iommu)
611 for (i = iommu->first_device; i <= iommu->last_device; ++i)
612 set_iommu_for_device(iommu, i);
617 static void __init free_iommu_one(struct amd_iommu *iommu)
619 free_command_buffer(iommu);
620 iommu_unmap_mmio_space(iommu);
623 static void __init free_iommu_all(void)
625 struct amd_iommu *iommu, *next;
627 list_for_each_entry_safe(iommu, next, &amd_iommu_list, list) {
628 list_del(&iommu->list);
629 free_iommu_one(iommu);
635 * This function clues the initialization function for one IOMMU
636 * together and also allocates the command buffer and programs the
637 * hardware. It does NOT enable the IOMMU. This is done afterwards.
639 static int __init init_iommu_one(struct amd_iommu *iommu, struct ivhd_header *h)
641 spin_lock_init(&iommu->lock);
642 list_add_tail(&iommu->list, &amd_iommu_list);
645 * Copy data from ACPI table entry to the iommu struct
647 iommu->devid = h->devid;
648 iommu->cap_ptr = h->cap_ptr;
649 iommu->mmio_phys = h->mmio_phys;
650 iommu->mmio_base = iommu_map_mmio_space(h->mmio_phys);
651 if (!iommu->mmio_base)
654 iommu_set_device_table(iommu);
655 iommu->cmd_buf = alloc_command_buffer(iommu);
659 init_iommu_from_pci(iommu);
660 init_iommu_from_acpi(iommu, h);
661 init_iommu_devices(iommu);
667 * Iterates over all IOMMU entries in the ACPI table, allocates the
668 * IOMMU structure and initializes it with init_iommu_one()
670 static int __init init_iommu_all(struct acpi_table_header *table)
672 u8 *p = (u8 *)table, *end = (u8 *)table;
673 struct ivhd_header *h;
674 struct amd_iommu *iommu;
677 end += table->length;
678 p += IVRS_HEADER_LENGTH;
681 h = (struct ivhd_header *)p;
684 iommu = kzalloc(sizeof(struct amd_iommu), GFP_KERNEL);
687 ret = init_iommu_one(iommu, h);
702 /****************************************************************************
704 * The next functions belong to the third pass of parsing the ACPI
705 * table. In this last pass the memory mapping requirements are
706 * gathered (like exclusion and unity mapping reanges).
708 ****************************************************************************/
710 static void __init free_unity_maps(void)
712 struct unity_map_entry *entry, *next;
714 list_for_each_entry_safe(entry, next, &amd_iommu_unity_map, list) {
715 list_del(&entry->list);
720 /* called when we find an exclusion range definition in ACPI */
721 static int __init init_exclusion_range(struct ivmd_header *m)
727 set_device_exclusion_range(m->devid, m);
729 case ACPI_IVMD_TYPE_ALL:
730 for (i = 0; i < amd_iommu_last_bdf; ++i)
731 set_device_exclusion_range(i, m);
733 case ACPI_IVMD_TYPE_RANGE:
734 for (i = m->devid; i <= m->aux; ++i)
735 set_device_exclusion_range(i, m);
744 /* called for unity map ACPI definition */
745 static int __init init_unity_map_range(struct ivmd_header *m)
747 struct unity_map_entry *e = 0;
749 e = kzalloc(sizeof(*e), GFP_KERNEL);
756 e->devid_start = e->devid_end = m->devid;
758 case ACPI_IVMD_TYPE_ALL:
760 e->devid_end = amd_iommu_last_bdf;
762 case ACPI_IVMD_TYPE_RANGE:
763 e->devid_start = m->devid;
764 e->devid_end = m->aux;
767 e->address_start = PAGE_ALIGN(m->range_start);
768 e->address_end = e->address_start + PAGE_ALIGN(m->range_length);
769 e->prot = m->flags >> 1;
771 list_add_tail(&e->list, &amd_iommu_unity_map);
776 /* iterates over all memory definitions we find in the ACPI table */
777 static int __init init_memory_definitions(struct acpi_table_header *table)
779 u8 *p = (u8 *)table, *end = (u8 *)table;
780 struct ivmd_header *m;
782 end += table->length;
783 p += IVRS_HEADER_LENGTH;
786 m = (struct ivmd_header *)p;
787 if (m->flags & IVMD_FLAG_EXCL_RANGE)
788 init_exclusion_range(m);
789 else if (m->flags & IVMD_FLAG_UNITY_MAP)
790 init_unity_map_range(m);
799 * This function finally enables all IOMMUs found in the system after
800 * they have been initialized
802 static void __init enable_iommus(void)
804 struct amd_iommu *iommu;
806 list_for_each_entry(iommu, &amd_iommu_list, list) {
807 iommu_set_exclusion_range(iommu);
813 * Suspend/Resume support
814 * disable suspend until real resume implemented
817 static int amd_iommu_resume(struct sys_device *dev)
822 static int amd_iommu_suspend(struct sys_device *dev, pm_message_t state)
827 static struct sysdev_class amd_iommu_sysdev_class = {
829 .suspend = amd_iommu_suspend,
830 .resume = amd_iommu_resume,
833 static struct sys_device device_amd_iommu = {
835 .cls = &amd_iommu_sysdev_class,
839 * This is the core init function for AMD IOMMU hardware in the system.
840 * This function is called from the generic x86 DMA layer initialization
843 * This function basically parses the ACPI table for AMD IOMMU (IVRS)
846 * 1 pass) Find the highest PCI device id the driver has to handle.
847 * Upon this information the size of the data structures is
848 * determined that needs to be allocated.
850 * 2 pass) Initialize the data structures just allocated with the
851 * information in the ACPI table about available AMD IOMMUs
852 * in the system. It also maps the PCI devices in the
853 * system to specific IOMMUs
855 * 3 pass) After the basic data structures are allocated and
856 * initialized we update them with information about memory
857 * remapping requirements parsed out of the ACPI table in
860 * After that the hardware is initialized and ready to go. In the last
861 * step we do some Linux specific things like registering the driver in
862 * the dma_ops interface and initializing the suspend/resume support
863 * functions. Finally it prints some information about AMD IOMMUs and
864 * the driver state and enables the hardware.
866 int __init amd_iommu_init(void)
872 printk(KERN_INFO "AMD IOMMU disabled by kernel command line\n");
876 if (!amd_iommu_detected)
880 * First parse ACPI tables to find the largest Bus/Dev/Func
881 * we need to handle. Upon this information the shared data
882 * structures for the IOMMUs in the system will be allocated
884 if (acpi_table_parse("IVRS", find_last_devid_acpi) != 0)
887 dev_table_size = tbl_size(DEV_TABLE_ENTRY_SIZE);
888 alias_table_size = tbl_size(ALIAS_TABLE_ENTRY_SIZE);
889 rlookup_table_size = tbl_size(RLOOKUP_TABLE_ENTRY_SIZE);
893 /* Device table - directly used by all IOMMUs */
894 amd_iommu_dev_table = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
895 get_order(dev_table_size));
896 if (amd_iommu_dev_table == NULL)
900 * Alias table - map PCI Bus/Dev/Func to Bus/Dev/Func the
901 * IOMMU see for that device
903 amd_iommu_alias_table = (void *)__get_free_pages(GFP_KERNEL,
904 get_order(alias_table_size));
905 if (amd_iommu_alias_table == NULL)
908 /* IOMMU rlookup table - find the IOMMU for a specific device */
909 amd_iommu_rlookup_table = (void *)__get_free_pages(GFP_KERNEL,
910 get_order(rlookup_table_size));
911 if (amd_iommu_rlookup_table == NULL)
915 * Protection Domain table - maps devices to protection domains
916 * This table has the same size as the rlookup_table
918 amd_iommu_pd_table = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO,
919 get_order(rlookup_table_size));
920 if (amd_iommu_pd_table == NULL)
923 amd_iommu_pd_alloc_bitmap = (void *)__get_free_pages(
924 GFP_KERNEL | __GFP_ZERO,
925 get_order(MAX_DOMAIN_ID/8));
926 if (amd_iommu_pd_alloc_bitmap == NULL)
930 * let all alias entries point to itself
932 for (i = 0; i < amd_iommu_last_bdf; ++i)
933 amd_iommu_alias_table[i] = i;
936 * never allocate domain 0 because its used as the non-allocated and
937 * error value placeholder
939 amd_iommu_pd_alloc_bitmap[0] = 1;
942 * now the data structures are allocated and basically initialized
943 * start the real acpi table scan
946 if (acpi_table_parse("IVRS", init_iommu_all) != 0)
949 if (acpi_table_parse("IVRS", init_memory_definitions) != 0)
952 ret = amd_iommu_init_dma_ops();
956 ret = sysdev_class_register(&amd_iommu_sysdev_class);
960 ret = sysdev_register(&device_amd_iommu);
966 printk(KERN_INFO "AMD IOMMU: aperture size is %d MB\n",
967 (1 << (amd_iommu_aperture_order-20)));
969 printk(KERN_INFO "AMD IOMMU: device isolation ");
970 if (amd_iommu_isolate)
973 printk("disabled\n");
979 free_pages((unsigned long)amd_iommu_pd_alloc_bitmap, 1);
981 free_pages((unsigned long)amd_iommu_pd_table,
982 get_order(rlookup_table_size));
984 free_pages((unsigned long)amd_iommu_rlookup_table,
985 get_order(rlookup_table_size));
987 free_pages((unsigned long)amd_iommu_alias_table,
988 get_order(alias_table_size));
990 free_pages((unsigned long)amd_iommu_dev_table,
991 get_order(dev_table_size));
1000 /****************************************************************************
1002 * Early detect code. This code runs at IOMMU detection time in the DMA
1003 * layer. It just looks if there is an IVRS ACPI table to detect AMD
1006 ****************************************************************************/
1007 static int __init early_amd_iommu_detect(struct acpi_table_header *table)
1012 void __init amd_iommu_detect(void)
1014 if (swiotlb || no_iommu || (iommu_detected && !gart_iommu_aperture))
1017 if (acpi_table_parse("IVRS", early_amd_iommu_detect) == 0) {
1019 amd_iommu_detected = 1;
1020 #ifdef CONFIG_GART_IOMMU
1021 gart_iommu_aperture_disabled = 1;
1022 gart_iommu_aperture = 0;
1027 /****************************************************************************
1029 * Parsing functions for the AMD IOMMU specific kernel command line
1032 ****************************************************************************/
1034 static int __init parse_amd_iommu_options(char *str)
1036 for (; *str; ++str) {
1037 if (strcmp(str, "isolate") == 0)
1038 amd_iommu_isolate = 1;
1044 static int __init parse_amd_iommu_size_options(char *str)
1046 unsigned order = PAGE_SHIFT + get_order(memparse(str, &str));
1048 if ((order > 24) && (order < 31))
1049 amd_iommu_aperture_order = order;
1054 __setup("amd_iommu=", parse_amd_iommu_options);
1055 __setup("amd_iommu_size=", parse_amd_iommu_size_options);