2 * Disk Array driver for HP SA 5xxx and 6xxx Controllers
3 * Copyright 2000, 2005 Hewlett-Packard Development Company, L.P.
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
13 * NON INFRINGEMENT. See the GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19 * Questions/Comments/Bugfixes to iss_storagedev@hp.com
23 #include <linux/config.h> /* CONFIG_PROC_FS */
24 #include <linux/module.h>
25 #include <linux/interrupt.h>
26 #include <linux/types.h>
27 #include <linux/pci.h>
28 #include <linux/kernel.h>
29 #include <linux/slab.h>
30 #include <linux/delay.h>
31 #include <linux/major.h>
33 #include <linux/bio.h>
34 #include <linux/blkpg.h>
35 #include <linux/timer.h>
36 #include <linux/proc_fs.h>
37 #include <linux/init.h>
38 #include <linux/hdreg.h>
39 #include <linux/spinlock.h>
40 #include <linux/compat.h>
41 #include <asm/uaccess.h>
44 #include <linux/dma-mapping.h>
45 #include <linux/blkdev.h>
46 #include <linux/genhd.h>
47 #include <linux/completion.h>
49 #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
50 #define DRIVER_NAME "HP CISS Driver (v 2.6.8)"
51 #define DRIVER_VERSION CCISS_DRIVER_VERSION(2,6,8)
53 /* Embedded module documentation macros - see modules.h */
54 MODULE_AUTHOR("Hewlett-Packard Company");
55 MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 2.6.8");
56 MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
57 " SA6i P600 P800 P400 P400i E200 E200i");
58 MODULE_LICENSE("GPL");
60 #include "cciss_cmd.h"
62 #include <linux/cciss_ioctl.h>
64 /* define the PCI info for the cards we can control */
65 static const struct pci_device_id cciss_pci_device_id[] = {
66 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISS,
67 0x0E11, 0x4070, 0, 0, 0},
68 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB,
69 0x0E11, 0x4080, 0, 0, 0},
70 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB,
71 0x0E11, 0x4082, 0, 0, 0},
72 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSB,
73 0x0E11, 0x4083, 0, 0, 0},
74 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC,
75 0x0E11, 0x409A, 0, 0, 0},
76 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC,
77 0x0E11, 0x409B, 0, 0, 0},
78 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC,
79 0x0E11, 0x409C, 0, 0, 0},
80 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC,
81 0x0E11, 0x409D, 0, 0, 0},
82 { PCI_VENDOR_ID_COMPAQ, PCI_DEVICE_ID_COMPAQ_CISSC,
83 0x0E11, 0x4091, 0, 0, 0},
84 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSA,
85 0x103C, 0x3225, 0, 0, 0},
86 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC,
87 0x103c, 0x3223, 0, 0, 0},
88 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC,
89 0x103c, 0x3234, 0, 0, 0},
90 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC,
91 0x103c, 0x3235, 0, 0, 0},
92 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD,
93 0x103c, 0x3211, 0, 0, 0},
94 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD,
95 0x103c, 0x3212, 0, 0, 0},
96 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD,
97 0x103c, 0x3213, 0, 0, 0},
98 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD,
99 0x103c, 0x3214, 0, 0, 0},
100 { PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD,
101 0x103c, 0x3215, 0, 0, 0},
104 MODULE_DEVICE_TABLE(pci, cciss_pci_device_id);
106 #define NR_PRODUCTS (sizeof(products)/sizeof(struct board_type))
108 /* board_id = Subsystem Device ID & Vendor ID
109 * product = Marketing Name for the board
110 * access = Address of the struct of function pointers
112 static struct board_type products[] = {
113 { 0x40700E11, "Smart Array 5300", &SA5_access },
114 { 0x40800E11, "Smart Array 5i", &SA5B_access},
115 { 0x40820E11, "Smart Array 532", &SA5B_access},
116 { 0x40830E11, "Smart Array 5312", &SA5B_access},
117 { 0x409A0E11, "Smart Array 641", &SA5_access},
118 { 0x409B0E11, "Smart Array 642", &SA5_access},
119 { 0x409C0E11, "Smart Array 6400", &SA5_access},
120 { 0x409D0E11, "Smart Array 6400 EM", &SA5_access},
121 { 0x40910E11, "Smart Array 6i", &SA5_access},
122 { 0x3225103C, "Smart Array P600", &SA5_access},
123 { 0x3223103C, "Smart Array P800", &SA5_access},
124 { 0x3234103C, "Smart Array P400", &SA5_access},
125 { 0x3235103C, "Smart Array P400i", &SA5_access},
126 { 0x3211103C, "Smart Array E200i", &SA5_access},
127 { 0x3212103C, "Smart Array E200", &SA5_access},
128 { 0x3213103C, "Smart Array E200i", &SA5_access},
129 { 0x3214103C, "Smart Array E200i", &SA5_access},
130 { 0x3215103C, "Smart Array E200i", &SA5_access},
133 /* How long to wait (in millesconds) for board to go into simple mode */
134 #define MAX_CONFIG_WAIT 30000
135 #define MAX_IOCTL_CONFIG_WAIT 1000
137 /*define how many times we will try a command because of bus resets */
138 #define MAX_CMD_RETRIES 3
140 #define READ_AHEAD 1024
141 #define NR_CMDS 384 /* #commands that can be outstanding */
144 /* Originally cciss driver only supports 8 major numbers */
145 #define MAX_CTLR_ORIG 8
148 static ctlr_info_t *hba[MAX_CTLR];
150 static void do_cciss_request(request_queue_t *q);
151 static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs);
152 static int cciss_open(struct inode *inode, struct file *filep);
153 static int cciss_release(struct inode *inode, struct file *filep);
154 static int cciss_ioctl(struct inode *inode, struct file *filep,
155 unsigned int cmd, unsigned long arg);
157 static int revalidate_allvol(ctlr_info_t *host);
158 static int cciss_revalidate(struct gendisk *disk);
159 static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk);
160 static int deregister_disk(struct gendisk *disk, drive_info_struct *drv, int clear_all);
162 static void cciss_read_capacity(int ctlr, int logvol, ReadCapdata_struct *buf,
163 int withirq, unsigned int *total_size, unsigned int *block_size);
164 static void cciss_geometry_inquiry(int ctlr, int logvol,
165 int withirq, unsigned int total_size,
166 unsigned int block_size, InquiryData_struct *inq_buff,
167 drive_info_struct *drv);
168 static void cciss_getgeometry(int cntl_num);
170 static void start_io( ctlr_info_t *h);
171 static int sendcmd( __u8 cmd, int ctlr, void *buff, size_t size,
172 unsigned int use_unit_num, unsigned int log_unit, __u8 page_code,
173 unsigned char *scsi3addr, int cmd_type);
174 static int sendcmd_withirq(__u8 cmd, int ctlr, void *buff, size_t size,
175 unsigned int use_unit_num, unsigned int log_unit, __u8 page_code,
178 static void fail_all_cmds(unsigned long ctlr);
180 #ifdef CONFIG_PROC_FS
181 static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
182 int length, int *eof, void *data);
183 static void cciss_procinit(int i);
185 static void cciss_procinit(int i) {}
186 #endif /* CONFIG_PROC_FS */
189 static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg);
192 static struct block_device_operations cciss_fops = {
193 .owner = THIS_MODULE,
195 .release = cciss_release,
196 .ioctl = cciss_ioctl,
198 .compat_ioctl = cciss_compat_ioctl,
200 .revalidate_disk= cciss_revalidate,
204 * Enqueuing and dequeuing functions for cmdlists.
206 static inline void addQ(CommandList_struct **Qptr, CommandList_struct *c)
210 c->next = c->prev = c;
212 c->prev = (*Qptr)->prev;
214 (*Qptr)->prev->next = c;
219 static inline CommandList_struct *removeQ(CommandList_struct **Qptr,
220 CommandList_struct *c)
222 if (c && c->next != c) {
223 if (*Qptr == c) *Qptr = c->next;
224 c->prev->next = c->next;
225 c->next->prev = c->prev;
232 #include "cciss_scsi.c" /* For SCSI tape support */
234 #ifdef CONFIG_PROC_FS
237 * Report information about this controller.
239 #define ENG_GIG 1000000000
240 #define ENG_GIG_FACTOR (ENG_GIG/512)
241 #define RAID_UNKNOWN 6
242 static const char *raid_label[] = {"0","4","1(1+0)","5","5+1","ADG",
245 static struct proc_dir_entry *proc_cciss;
247 static int cciss_proc_get_info(char *buffer, char **start, off_t offset,
248 int length, int *eof, void *data)
253 ctlr_info_t *h = (ctlr_info_t*)data;
254 drive_info_struct *drv;
256 sector_t vol_sz, vol_sz_frac;
260 /* prevent displaying bogus info during configuration
261 * or deconfiguration of a logical volume
263 spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
264 if (h->busy_configuring) {
265 spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
268 h->busy_configuring = 1;
269 spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
271 size = sprintf(buffer, "%s: HP %s Controller\n"
272 "Board ID: 0x%08lx\n"
273 "Firmware Version: %c%c%c%c\n"
275 "Logical drives: %d\n"
276 "Current Q depth: %d\n"
277 "Current # commands on controller: %d\n"
278 "Max Q depth since init: %d\n"
279 "Max # commands on controller since init: %d\n"
280 "Max SG entries since init: %d\n\n",
283 (unsigned long)h->board_id,
284 h->firm_ver[0], h->firm_ver[1], h->firm_ver[2], h->firm_ver[3],
285 (unsigned int)h->intr,
287 h->Qdepth, h->commands_outstanding,
288 h->maxQsinceinit, h->max_outstanding, h->maxSG);
290 pos += size; len += size;
291 cciss_proc_tape_report(ctlr, buffer, &pos, &len);
292 for(i=0; i<=h->highest_lun; i++) {
298 vol_sz = drv->nr_blocks;
299 vol_sz_frac = sector_div(vol_sz, ENG_GIG_FACTOR);
301 sector_div(vol_sz_frac, ENG_GIG_FACTOR);
303 if (drv->raid_level > 5)
304 drv->raid_level = RAID_UNKNOWN;
305 size = sprintf(buffer+len, "cciss/c%dd%d:"
306 "\t%4u.%02uGB\tRAID %s\n",
307 ctlr, i, (int)vol_sz, (int)vol_sz_frac,
308 raid_label[drv->raid_level]);
309 pos += size; len += size;
313 *start = buffer+offset;
317 h->busy_configuring = 0;
322 cciss_proc_write(struct file *file, const char __user *buffer,
323 unsigned long count, void *data)
325 unsigned char cmd[80];
327 #ifdef CONFIG_CISS_SCSI_TAPE
328 ctlr_info_t *h = (ctlr_info_t *) data;
332 if (count > sizeof(cmd)-1) return -EINVAL;
333 if (copy_from_user(cmd, buffer, count)) return -EFAULT;
335 len = strlen(cmd); // above 3 lines ensure safety
336 if (len && cmd[len-1] == '\n')
338 # ifdef CONFIG_CISS_SCSI_TAPE
339 if (strcmp("engage scsi", cmd)==0) {
340 rc = cciss_engage_scsi(h->ctlr);
341 if (rc != 0) return -rc;
344 /* might be nice to have "disengage" too, but it's not
345 safely possible. (only 1 module use count, lock issues.) */
351 * Get us a file in /proc/cciss that says something about each controller.
352 * Create /proc/cciss if it doesn't exist yet.
354 static void __devinit cciss_procinit(int i)
356 struct proc_dir_entry *pde;
358 if (proc_cciss == NULL) {
359 proc_cciss = proc_mkdir("cciss", proc_root_driver);
364 pde = create_proc_read_entry(hba[i]->devname,
365 S_IWUSR | S_IRUSR | S_IRGRP | S_IROTH,
366 proc_cciss, cciss_proc_get_info, hba[i]);
367 pde->write_proc = cciss_proc_write;
369 #endif /* CONFIG_PROC_FS */
372 * For operations that cannot sleep, a command block is allocated at init,
373 * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
374 * which ones are free or in use. For operations that can wait for kmalloc
375 * to possible sleep, this routine can be called with get_from_pool set to 0.
376 * cmd_free() MUST be called with a got_from_pool set to 0 if cmd_alloc was.
378 static CommandList_struct * cmd_alloc(ctlr_info_t *h, int get_from_pool)
380 CommandList_struct *c;
383 dma_addr_t cmd_dma_handle, err_dma_handle;
387 c = (CommandList_struct *) pci_alloc_consistent(
388 h->pdev, sizeof(CommandList_struct), &cmd_dma_handle);
391 memset(c, 0, sizeof(CommandList_struct));
395 c->err_info = (ErrorInfo_struct *)pci_alloc_consistent(
396 h->pdev, sizeof(ErrorInfo_struct),
399 if (c->err_info == NULL)
401 pci_free_consistent(h->pdev,
402 sizeof(CommandList_struct), c, cmd_dma_handle);
405 memset(c->err_info, 0, sizeof(ErrorInfo_struct));
406 } else /* get it out of the controllers pool */
409 i = find_first_zero_bit(h->cmd_pool_bits, NR_CMDS);
412 } while(test_and_set_bit(i & (BITS_PER_LONG - 1), h->cmd_pool_bits+(i/BITS_PER_LONG)) != 0);
414 printk(KERN_DEBUG "cciss: using command buffer %d\n", i);
417 memset(c, 0, sizeof(CommandList_struct));
418 cmd_dma_handle = h->cmd_pool_dhandle
419 + i*sizeof(CommandList_struct);
420 c->err_info = h->errinfo_pool + i;
421 memset(c->err_info, 0, sizeof(ErrorInfo_struct));
422 err_dma_handle = h->errinfo_pool_dhandle
423 + i*sizeof(ErrorInfo_struct);
429 c->busaddr = (__u32) cmd_dma_handle;
430 temp64.val = (__u64) err_dma_handle;
431 c->ErrDesc.Addr.lower = temp64.val32.lower;
432 c->ErrDesc.Addr.upper = temp64.val32.upper;
433 c->ErrDesc.Len = sizeof(ErrorInfo_struct);
442 * Frees a command block that was previously allocated with cmd_alloc().
444 static void cmd_free(ctlr_info_t *h, CommandList_struct *c, int got_from_pool)
451 temp64.val32.lower = c->ErrDesc.Addr.lower;
452 temp64.val32.upper = c->ErrDesc.Addr.upper;
453 pci_free_consistent(h->pdev, sizeof(ErrorInfo_struct),
454 c->err_info, (dma_addr_t) temp64.val);
455 pci_free_consistent(h->pdev, sizeof(CommandList_struct),
456 c, (dma_addr_t) c->busaddr);
460 clear_bit(i&(BITS_PER_LONG-1), h->cmd_pool_bits+(i/BITS_PER_LONG));
465 static inline ctlr_info_t *get_host(struct gendisk *disk)
467 return disk->queue->queuedata;
470 static inline drive_info_struct *get_drv(struct gendisk *disk)
472 return disk->private_data;
476 * Open. Make sure the device is really there.
478 static int cciss_open(struct inode *inode, struct file *filep)
480 ctlr_info_t *host = get_host(inode->i_bdev->bd_disk);
481 drive_info_struct *drv = get_drv(inode->i_bdev->bd_disk);
484 printk(KERN_DEBUG "cciss_open %s\n", inode->i_bdev->bd_disk->disk_name);
485 #endif /* CCISS_DEBUG */
487 if (host->busy_initializing || drv->busy_configuring)
490 * Root is allowed to open raw volume zero even if it's not configured
491 * so array config can still work. Root is also allowed to open any
492 * volume that has a LUN ID, so it can issue IOCTL to reread the
493 * disk information. I don't think I really like this
494 * but I'm already using way to many device nodes to claim another one
495 * for "raw controller".
497 if (drv->nr_blocks == 0) {
498 if (iminor(inode) != 0) { /* not node 0? */
499 /* if not node 0 make sure it is a partition = 0 */
500 if (iminor(inode) & 0x0f) {
502 /* if it is, make sure we have a LUN ID */
503 } else if (drv->LunID == 0) {
507 if (!capable(CAP_SYS_ADMIN))
517 static int cciss_release(struct inode *inode, struct file *filep)
519 ctlr_info_t *host = get_host(inode->i_bdev->bd_disk);
520 drive_info_struct *drv = get_drv(inode->i_bdev->bd_disk);
523 printk(KERN_DEBUG "cciss_release %s\n", inode->i_bdev->bd_disk->disk_name);
524 #endif /* CCISS_DEBUG */
533 static int do_ioctl(struct file *f, unsigned cmd, unsigned long arg)
537 ret = cciss_ioctl(f->f_dentry->d_inode, f, cmd, arg);
542 static int cciss_ioctl32_passthru(struct file *f, unsigned cmd, unsigned long arg);
543 static int cciss_ioctl32_big_passthru(struct file *f, unsigned cmd, unsigned long arg);
545 static long cciss_compat_ioctl(struct file *f, unsigned cmd, unsigned long arg)
548 case CCISS_GETPCIINFO:
549 case CCISS_GETINTINFO:
550 case CCISS_SETINTINFO:
551 case CCISS_GETNODENAME:
552 case CCISS_SETNODENAME:
553 case CCISS_GETHEARTBEAT:
554 case CCISS_GETBUSTYPES:
555 case CCISS_GETFIRMVER:
556 case CCISS_GETDRIVVER:
557 case CCISS_REVALIDVOLS:
558 case CCISS_DEREGDISK:
559 case CCISS_REGNEWDISK:
561 case CCISS_RESCANDISK:
562 case CCISS_GETLUNINFO:
563 return do_ioctl(f, cmd, arg);
565 case CCISS_PASSTHRU32:
566 return cciss_ioctl32_passthru(f, cmd, arg);
567 case CCISS_BIG_PASSTHRU32:
568 return cciss_ioctl32_big_passthru(f, cmd, arg);
575 static int cciss_ioctl32_passthru(struct file *f, unsigned cmd, unsigned long arg)
577 IOCTL32_Command_struct __user *arg32 =
578 (IOCTL32_Command_struct __user *) arg;
579 IOCTL_Command_struct arg64;
580 IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64));
585 err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, sizeof(arg64.LUN_info));
586 err |= copy_from_user(&arg64.Request, &arg32->Request, sizeof(arg64.Request));
587 err |= copy_from_user(&arg64.error_info, &arg32->error_info, sizeof(arg64.error_info));
588 err |= get_user(arg64.buf_size, &arg32->buf_size);
589 err |= get_user(cp, &arg32->buf);
590 arg64.buf = compat_ptr(cp);
591 err |= copy_to_user(p, &arg64, sizeof(arg64));
596 err = do_ioctl(f, CCISS_PASSTHRU, (unsigned long) p);
599 err |= copy_in_user(&arg32->error_info, &p->error_info, sizeof(arg32->error_info));
605 static int cciss_ioctl32_big_passthru(struct file *file, unsigned cmd, unsigned long arg)
607 BIG_IOCTL32_Command_struct __user *arg32 =
608 (BIG_IOCTL32_Command_struct __user *) arg;
609 BIG_IOCTL_Command_struct arg64;
610 BIG_IOCTL_Command_struct __user *p = compat_alloc_user_space(sizeof(arg64));
615 err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info, sizeof(arg64.LUN_info));
616 err |= copy_from_user(&arg64.Request, &arg32->Request, sizeof(arg64.Request));
617 err |= copy_from_user(&arg64.error_info, &arg32->error_info, sizeof(arg64.error_info));
618 err |= get_user(arg64.buf_size, &arg32->buf_size);
619 err |= get_user(arg64.malloc_size, &arg32->malloc_size);
620 err |= get_user(cp, &arg32->buf);
621 arg64.buf = compat_ptr(cp);
622 err |= copy_to_user(p, &arg64, sizeof(arg64));
627 err = do_ioctl(file, CCISS_BIG_PASSTHRU, (unsigned long) p);
630 err |= copy_in_user(&arg32->error_info, &p->error_info, sizeof(arg32->error_info));
639 static int cciss_ioctl(struct inode *inode, struct file *filep,
640 unsigned int cmd, unsigned long arg)
642 struct block_device *bdev = inode->i_bdev;
643 struct gendisk *disk = bdev->bd_disk;
644 ctlr_info_t *host = get_host(disk);
645 drive_info_struct *drv = get_drv(disk);
646 int ctlr = host->ctlr;
647 void __user *argp = (void __user *)arg;
650 printk(KERN_DEBUG "cciss_ioctl: Called with cmd=%x %lx\n", cmd, arg);
651 #endif /* CCISS_DEBUG */
656 struct hd_geometry driver_geo;
657 if (drv->cylinders) {
658 driver_geo.heads = drv->heads;
659 driver_geo.sectors = drv->sectors;
660 driver_geo.cylinders = drv->cylinders;
663 driver_geo.start= get_start_sect(inode->i_bdev);
664 if (copy_to_user(argp, &driver_geo, sizeof(struct hd_geometry)))
669 case CCISS_GETPCIINFO:
671 cciss_pci_info_struct pciinfo;
673 if (!arg) return -EINVAL;
674 pciinfo.domain = pci_domain_nr(host->pdev->bus);
675 pciinfo.bus = host->pdev->bus->number;
676 pciinfo.dev_fn = host->pdev->devfn;
677 pciinfo.board_id = host->board_id;
678 if (copy_to_user(argp, &pciinfo, sizeof( cciss_pci_info_struct )))
682 case CCISS_GETINTINFO:
684 cciss_coalint_struct intinfo;
685 if (!arg) return -EINVAL;
686 intinfo.delay = readl(&host->cfgtable->HostWrite.CoalIntDelay);
687 intinfo.count = readl(&host->cfgtable->HostWrite.CoalIntCount);
688 if (copy_to_user(argp, &intinfo, sizeof( cciss_coalint_struct )))
692 case CCISS_SETINTINFO:
694 cciss_coalint_struct intinfo;
698 if (!arg) return -EINVAL;
699 if (!capable(CAP_SYS_ADMIN)) return -EPERM;
700 if (copy_from_user(&intinfo, argp, sizeof( cciss_coalint_struct)))
702 if ( (intinfo.delay == 0 ) && (intinfo.count == 0))
705 // printk("cciss_ioctl: delay and count cannot be 0\n");
708 spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
709 /* Update the field, and then ring the doorbell */
710 writel( intinfo.delay,
711 &(host->cfgtable->HostWrite.CoalIntDelay));
712 writel( intinfo.count,
713 &(host->cfgtable->HostWrite.CoalIntCount));
714 writel( CFGTBL_ChangeReq, host->vaddr + SA5_DOORBELL);
716 for(i=0;i<MAX_IOCTL_CONFIG_WAIT;i++) {
717 if (!(readl(host->vaddr + SA5_DOORBELL)
720 /* delay and try again */
723 spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
724 if (i >= MAX_IOCTL_CONFIG_WAIT)
728 case CCISS_GETNODENAME:
730 NodeName_type NodeName;
733 if (!arg) return -EINVAL;
735 NodeName[i] = readb(&host->cfgtable->ServerName[i]);
736 if (copy_to_user(argp, NodeName, sizeof( NodeName_type)))
740 case CCISS_SETNODENAME:
742 NodeName_type NodeName;
746 if (!arg) return -EINVAL;
747 if (!capable(CAP_SYS_ADMIN)) return -EPERM;
749 if (copy_from_user(NodeName, argp, sizeof( NodeName_type)))
752 spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
754 /* Update the field, and then ring the doorbell */
756 writeb( NodeName[i], &host->cfgtable->ServerName[i]);
758 writel( CFGTBL_ChangeReq, host->vaddr + SA5_DOORBELL);
760 for(i=0;i<MAX_IOCTL_CONFIG_WAIT;i++) {
761 if (!(readl(host->vaddr + SA5_DOORBELL)
764 /* delay and try again */
767 spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
768 if (i >= MAX_IOCTL_CONFIG_WAIT)
773 case CCISS_GETHEARTBEAT:
775 Heartbeat_type heartbeat;
777 if (!arg) return -EINVAL;
778 heartbeat = readl(&host->cfgtable->HeartBeat);
779 if (copy_to_user(argp, &heartbeat, sizeof( Heartbeat_type)))
783 case CCISS_GETBUSTYPES:
785 BusTypes_type BusTypes;
787 if (!arg) return -EINVAL;
788 BusTypes = readl(&host->cfgtable->BusTypes);
789 if (copy_to_user(argp, &BusTypes, sizeof( BusTypes_type) ))
793 case CCISS_GETFIRMVER:
795 FirmwareVer_type firmware;
797 if (!arg) return -EINVAL;
798 memcpy(firmware, host->firm_ver, 4);
800 if (copy_to_user(argp, firmware, sizeof( FirmwareVer_type)))
804 case CCISS_GETDRIVVER:
806 DriverVer_type DriverVer = DRIVER_VERSION;
808 if (!arg) return -EINVAL;
810 if (copy_to_user(argp, &DriverVer, sizeof( DriverVer_type) ))
815 case CCISS_REVALIDVOLS:
816 if (bdev != bdev->bd_contains || drv != host->drv)
818 return revalidate_allvol(host);
820 case CCISS_GETLUNINFO: {
821 LogvolInfo_struct luninfo;
823 luninfo.LunID = drv->LunID;
824 luninfo.num_opens = drv->usage_count;
825 luninfo.num_parts = 0;
826 if (copy_to_user(argp, &luninfo,
827 sizeof(LogvolInfo_struct)))
831 case CCISS_DEREGDISK:
832 return rebuild_lun_table(host, disk);
835 return rebuild_lun_table(host, NULL);
839 IOCTL_Command_struct iocommand;
840 CommandList_struct *c;
844 DECLARE_COMPLETION(wait);
846 if (!arg) return -EINVAL;
848 if (!capable(CAP_SYS_RAWIO)) return -EPERM;
850 if (copy_from_user(&iocommand, argp, sizeof( IOCTL_Command_struct) ))
852 if((iocommand.buf_size < 1) &&
853 (iocommand.Request.Type.Direction != XFER_NONE))
857 #if 0 /* 'buf_size' member is 16-bits, and always smaller than kmalloc limit */
858 /* Check kmalloc limits */
859 if(iocommand.buf_size > 128000)
862 if(iocommand.buf_size > 0)
864 buff = kmalloc(iocommand.buf_size, GFP_KERNEL);
868 if (iocommand.Request.Type.Direction == XFER_WRITE)
870 /* Copy the data into the buffer we created */
871 if (copy_from_user(buff, iocommand.buf, iocommand.buf_size))
877 memset(buff, 0, iocommand.buf_size);
879 if ((c = cmd_alloc(host , 0)) == NULL)
884 // Fill in the command type
885 c->cmd_type = CMD_IOCTL_PEND;
886 // Fill in Command Header
887 c->Header.ReplyQueue = 0; // unused in simple mode
888 if( iocommand.buf_size > 0) // buffer to fill
890 c->Header.SGList = 1;
891 c->Header.SGTotal= 1;
892 } else // no buffers to fill
894 c->Header.SGList = 0;
895 c->Header.SGTotal= 0;
897 c->Header.LUN = iocommand.LUN_info;
898 c->Header.Tag.lower = c->busaddr; // use the kernel address the cmd block for tag
900 // Fill in Request block
901 c->Request = iocommand.Request;
903 // Fill in the scatter gather information
904 if (iocommand.buf_size > 0 )
906 temp64.val = pci_map_single( host->pdev, buff,
908 PCI_DMA_BIDIRECTIONAL);
909 c->SG[0].Addr.lower = temp64.val32.lower;
910 c->SG[0].Addr.upper = temp64.val32.upper;
911 c->SG[0].Len = iocommand.buf_size;
912 c->SG[0].Ext = 0; // we are not chaining
916 /* Put the request on the tail of the request queue */
917 spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
918 addQ(&host->reqQ, c);
921 spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
923 wait_for_completion(&wait);
925 /* unlock the buffers from DMA */
926 temp64.val32.lower = c->SG[0].Addr.lower;
927 temp64.val32.upper = c->SG[0].Addr.upper;
928 pci_unmap_single( host->pdev, (dma_addr_t) temp64.val,
929 iocommand.buf_size, PCI_DMA_BIDIRECTIONAL);
931 /* Copy the error information out */
932 iocommand.error_info = *(c->err_info);
933 if ( copy_to_user(argp, &iocommand, sizeof( IOCTL_Command_struct) ) )
936 cmd_free(host, c, 0);
940 if (iocommand.Request.Type.Direction == XFER_READ)
942 /* Copy the data out of the buffer we created */
943 if (copy_to_user(iocommand.buf, buff, iocommand.buf_size))
946 cmd_free(host, c, 0);
951 cmd_free(host, c, 0);
954 case CCISS_BIG_PASSTHRU: {
955 BIG_IOCTL_Command_struct *ioc;
956 CommandList_struct *c;
957 unsigned char **buff = NULL;
958 int *buff_size = NULL;
964 DECLARE_COMPLETION(wait);
967 BYTE __user *data_ptr;
971 if (!capable(CAP_SYS_RAWIO))
973 ioc = (BIG_IOCTL_Command_struct *)
974 kmalloc(sizeof(*ioc), GFP_KERNEL);
979 if (copy_from_user(ioc, argp, sizeof(*ioc))) {
983 if ((ioc->buf_size < 1) &&
984 (ioc->Request.Type.Direction != XFER_NONE)) {
988 /* Check kmalloc limits using all SGs */
989 if (ioc->malloc_size > MAX_KMALLOC_SIZE) {
993 if (ioc->buf_size > ioc->malloc_size * MAXSGENTRIES) {
997 buff = (unsigned char **) kmalloc(MAXSGENTRIES *
998 sizeof(char *), GFP_KERNEL);
1003 memset(buff, 0, MAXSGENTRIES);
1004 buff_size = (int *) kmalloc(MAXSGENTRIES * sizeof(int),
1010 left = ioc->buf_size;
1011 data_ptr = ioc->buf;
1013 sz = (left > ioc->malloc_size) ? ioc->malloc_size : left;
1014 buff_size[sg_used] = sz;
1015 buff[sg_used] = kmalloc(sz, GFP_KERNEL);
1016 if (buff[sg_used] == NULL) {
1020 if (ioc->Request.Type.Direction == XFER_WRITE) {
1021 if (copy_from_user(buff[sg_used], data_ptr, sz)) {
1026 memset(buff[sg_used], 0, sz);
1032 if ((c = cmd_alloc(host , 0)) == NULL) {
1036 c->cmd_type = CMD_IOCTL_PEND;
1037 c->Header.ReplyQueue = 0;
1039 if( ioc->buf_size > 0) {
1040 c->Header.SGList = sg_used;
1041 c->Header.SGTotal= sg_used;
1043 c->Header.SGList = 0;
1044 c->Header.SGTotal= 0;
1046 c->Header.LUN = ioc->LUN_info;
1047 c->Header.Tag.lower = c->busaddr;
1049 c->Request = ioc->Request;
1050 if (ioc->buf_size > 0 ) {
1052 for(i=0; i<sg_used; i++) {
1053 temp64.val = pci_map_single( host->pdev, buff[i],
1055 PCI_DMA_BIDIRECTIONAL);
1056 c->SG[i].Addr.lower = temp64.val32.lower;
1057 c->SG[i].Addr.upper = temp64.val32.upper;
1058 c->SG[i].Len = buff_size[i];
1059 c->SG[i].Ext = 0; /* we are not chaining */
1063 /* Put the request on the tail of the request queue */
1064 spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
1065 addQ(&host->reqQ, c);
1068 spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
1069 wait_for_completion(&wait);
1070 /* unlock the buffers from DMA */
1071 for(i=0; i<sg_used; i++) {
1072 temp64.val32.lower = c->SG[i].Addr.lower;
1073 temp64.val32.upper = c->SG[i].Addr.upper;
1074 pci_unmap_single( host->pdev, (dma_addr_t) temp64.val,
1075 buff_size[i], PCI_DMA_BIDIRECTIONAL);
1077 /* Copy the error information out */
1078 ioc->error_info = *(c->err_info);
1079 if (copy_to_user(argp, ioc, sizeof(*ioc))) {
1080 cmd_free(host, c, 0);
1084 if (ioc->Request.Type.Direction == XFER_READ) {
1085 /* Copy the data out of the buffer we created */
1086 BYTE __user *ptr = ioc->buf;
1087 for(i=0; i< sg_used; i++) {
1088 if (copy_to_user(ptr, buff[i], buff_size[i])) {
1089 cmd_free(host, c, 0);
1093 ptr += buff_size[i];
1096 cmd_free(host, c, 0);
1100 for(i=0; i<sg_used; i++)
1115 * revalidate_allvol is for online array config utilities. After a
1116 * utility reconfigures the drives in the array, it can use this function
1117 * (through an ioctl) to make the driver zap any previous disk structs for
1118 * that controller and get new ones.
1120 * Right now I'm using the getgeometry() function to do this, but this
1121 * function should probably be finer grained and allow you to revalidate one
1122 * particualar logical volume (instead of all of them on a particular
1125 static int revalidate_allvol(ctlr_info_t *host)
1127 int ctlr = host->ctlr, i;
1128 unsigned long flags;
1130 spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
1131 if (host->usage_count > 1) {
1132 spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
1133 printk(KERN_WARNING "cciss: Device busy for volume"
1134 " revalidation (usage=%d)\n", host->usage_count);
1137 host->usage_count++;
1138 spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
1140 for(i=0; i< NWD; i++) {
1141 struct gendisk *disk = host->gendisk[i];
1142 if (disk->flags & GENHD_FL_UP)
1147 * Set the partition and block size structures for all volumes
1148 * on this controller to zero. We will reread all of this data
1150 memset(host->drv, 0, sizeof(drive_info_struct)
1153 * Tell the array controller not to give us any interrupts while
1154 * we check the new geometry. Then turn interrupts back on when
1157 host->access.set_intr_mask(host, CCISS_INTR_OFF);
1158 cciss_getgeometry(ctlr);
1159 host->access.set_intr_mask(host, CCISS_INTR_ON);
1161 /* Loop through each real device */
1162 for (i = 0; i < NWD; i++) {
1163 struct gendisk *disk = host->gendisk[i];
1164 drive_info_struct *drv = &(host->drv[i]);
1165 /* we must register the controller even if no disks exist */
1166 /* this is for the online array utilities */
1167 if (!drv->heads && i)
1169 blk_queue_hardsect_size(drv->queue, drv->block_size);
1170 set_capacity(disk, drv->nr_blocks);
1173 host->usage_count--;
1177 /* This function will check the usage_count of the drive to be updated/added.
1178 * If the usage_count is zero then the drive information will be updated and
1179 * the disk will be re-registered with the kernel. If not then it will be
1180 * left alone for the next reboot. The exception to this is disk 0 which
1181 * will always be left registered with the kernel since it is also the
1182 * controller node. Any changes to disk 0 will show up on the next
1185 static void cciss_update_drive_info(int ctlr, int drv_index)
1187 ctlr_info_t *h = hba[ctlr];
1188 struct gendisk *disk;
1189 ReadCapdata_struct *size_buff = NULL;
1190 InquiryData_struct *inq_buff = NULL;
1191 unsigned int block_size;
1192 unsigned int total_size;
1193 unsigned long flags = 0;
1196 /* if the disk already exists then deregister it before proceeding*/
1197 if (h->drv[drv_index].raid_level != -1){
1198 spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
1199 h->drv[drv_index].busy_configuring = 1;
1200 spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
1201 ret = deregister_disk(h->gendisk[drv_index],
1202 &h->drv[drv_index], 0);
1203 h->drv[drv_index].busy_configuring = 0;
1206 /* If the disk is in use return */
1211 /* Get information about the disk and modify the driver sturcture */
1212 size_buff = kmalloc(sizeof( ReadCapdata_struct), GFP_KERNEL);
1213 if (size_buff == NULL)
1215 inq_buff = kmalloc(sizeof( InquiryData_struct), GFP_KERNEL);
1216 if (inq_buff == NULL)
1219 cciss_read_capacity(ctlr, drv_index, size_buff, 1,
1220 &total_size, &block_size);
1221 cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size,
1222 inq_buff, &h->drv[drv_index]);
1225 disk = h->gendisk[drv_index];
1226 set_capacity(disk, h->drv[drv_index].nr_blocks);
1229 /* if it's the controller it's already added */
1231 disk->queue = blk_init_queue(do_cciss_request, &h->lock);
1233 /* Set up queue information */
1234 disk->queue->backing_dev_info.ra_pages = READ_AHEAD;
1235 blk_queue_bounce_limit(disk->queue, hba[ctlr]->pdev->dma_mask);
1237 /* This is a hardware imposed limit. */
1238 blk_queue_max_hw_segments(disk->queue, MAXSGENTRIES);
1240 /* This is a limit in the driver and could be eliminated. */
1241 blk_queue_max_phys_segments(disk->queue, MAXSGENTRIES);
1243 blk_queue_max_sectors(disk->queue, 512);
1245 disk->queue->queuedata = hba[ctlr];
1247 blk_queue_hardsect_size(disk->queue,
1248 hba[ctlr]->drv[drv_index].block_size);
1250 h->drv[drv_index].queue = disk->queue;
1259 printk(KERN_ERR "cciss: out of memory\n");
1263 /* This function will find the first index of the controllers drive array
1264 * that has a -1 for the raid_level and will return that index. This is
1265 * where new drives will be added. If the index to be returned is greater
1266 * than the highest_lun index for the controller then highest_lun is set
1267 * to this new index. If there are no available indexes then -1 is returned.
1269 static int cciss_find_free_drive_index(int ctlr)
1273 for (i=0; i < CISS_MAX_LUN; i++){
1274 if (hba[ctlr]->drv[i].raid_level == -1){
1275 if (i > hba[ctlr]->highest_lun)
1276 hba[ctlr]->highest_lun = i;
1283 /* This function will add and remove logical drives from the Logical
1284 * drive array of the controller and maintain persistancy of ordering
1285 * so that mount points are preserved until the next reboot. This allows
1286 * for the removal of logical drives in the middle of the drive array
1287 * without a re-ordering of those drives.
1289 * h = The controller to perform the operations on
1290 * del_disk = The disk to remove if specified. If the value given
1291 * is NULL then no disk is removed.
1293 static int rebuild_lun_table(ctlr_info_t *h, struct gendisk *del_disk)
1297 ReportLunData_struct *ld_buff = NULL;
1298 drive_info_struct *drv = NULL;
1305 unsigned long flags;
1307 /* Set busy_configuring flag for this operation */
1308 spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
1309 if (h->num_luns >= CISS_MAX_LUN){
1310 spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
1314 if (h->busy_configuring){
1315 spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
1318 h->busy_configuring = 1;
1320 /* if del_disk is NULL then we are being called to add a new disk
1321 * and update the logical drive table. If it is not NULL then
1322 * we will check if the disk is in use or not.
1324 if (del_disk != NULL){
1325 drv = get_drv(del_disk);
1326 drv->busy_configuring = 1;
1327 spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
1328 return_code = deregister_disk(del_disk, drv, 1);
1329 drv->busy_configuring = 0;
1330 h->busy_configuring = 0;
1333 spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
1334 if (!capable(CAP_SYS_RAWIO))
1337 ld_buff = kzalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
1338 if (ld_buff == NULL)
1341 return_code = sendcmd_withirq(CISS_REPORT_LOG, ctlr, ld_buff,
1342 sizeof(ReportLunData_struct), 0, 0, 0,
1345 if (return_code == IO_OK){
1346 listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24;
1347 listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16;
1348 listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8;
1349 listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]);
1350 } else{ /* reading number of logical volumes failed */
1351 printk(KERN_WARNING "cciss: report logical volume"
1352 " command failed\n");
1357 num_luns = listlength / 8; /* 8 bytes per entry */
1358 if (num_luns > CISS_MAX_LUN){
1359 num_luns = CISS_MAX_LUN;
1360 printk(KERN_WARNING "cciss: more luns configured"
1361 " on controller than can be handled by"
1365 /* Compare controller drive array to drivers drive array.
1366 * Check for updates in the drive information and any new drives
1367 * on the controller.
1369 for (i=0; i < num_luns; i++){
1375 (unsigned int)(ld_buff->LUN[i][3])) << 24;
1377 (unsigned int)(ld_buff->LUN[i][2])) << 16;
1379 (unsigned int)(ld_buff->LUN[i][1])) << 8;
1381 (unsigned int)(ld_buff->LUN[i][0]);
1383 /* Find if the LUN is already in the drive array
1384 * of the controller. If so then update its info
1385 * if not is use. If it does not exist then find
1386 * the first free index and add it.
1388 for (j=0; j <= h->highest_lun; j++){
1389 if (h->drv[j].LunID == lunid){
1395 /* check if the drive was found already in the array */
1397 drv_index = cciss_find_free_drive_index(ctlr);
1398 if (drv_index == -1)
1402 h->drv[drv_index].LunID = lunid;
1403 cciss_update_drive_info(ctlr, drv_index);
1409 h->busy_configuring = 0;
1410 /* We return -1 here to tell the ACU that we have registered/updated
1411 * all of the drives that we can and to keep it from calling us
1416 printk(KERN_ERR "cciss: out of memory\n");
1420 /* This function will deregister the disk and it's queue from the
1421 * kernel. It must be called with the controller lock held and the
1422 * drv structures busy_configuring flag set. It's parameters are:
1424 * disk = This is the disk to be deregistered
1425 * drv = This is the drive_info_struct associated with the disk to be
1426 * deregistered. It contains information about the disk used
1428 * clear_all = This flag determines whether or not the disk information
1429 * is going to be completely cleared out and the highest_lun
1430 * reset. Sometimes we want to clear out information about
1431 * the disk in preperation for re-adding it. In this case
1432 * the highest_lun should be left unchanged and the LunID
1433 * should not be cleared.
1435 static int deregister_disk(struct gendisk *disk, drive_info_struct *drv,
1438 ctlr_info_t *h = get_host(disk);
1440 if (!capable(CAP_SYS_RAWIO))
1443 /* make sure logical volume is NOT is use */
1444 if(clear_all || (h->gendisk[0] == disk)) {
1445 if (drv->usage_count > 1)
1449 if( drv->usage_count > 0 )
1452 /* invalidate the devices and deregister the disk. If it is disk
1453 * zero do not deregister it but just zero out it's values. This
1454 * allows us to delete disk zero but keep the controller registered.
1456 if (h->gendisk[0] != disk){
1457 if (disk->flags & GENHD_FL_UP){
1458 blk_cleanup_queue(disk->queue);
1465 /* zero out the disk size info */
1467 drv->block_size = 0;
1471 drv->raid_level = -1; /* This can be used as a flag variable to
1472 * indicate that this element of the drive
1477 /* check to see if it was the last disk */
1478 if (drv == h->drv + h->highest_lun) {
1479 /* if so, find the new hightest lun */
1480 int i, newhighest =-1;
1481 for(i=0; i<h->highest_lun; i++) {
1482 /* if the disk has size > 0, it is available */
1483 if (h->drv[i].heads)
1486 h->highest_lun = newhighest;
1494 static int fill_cmd(CommandList_struct *c, __u8 cmd, int ctlr, void *buff,
1496 unsigned int use_unit_num, /* 0: address the controller,
1497 1: address logical volume log_unit,
1498 2: periph device address is scsi3addr */
1499 unsigned int log_unit, __u8 page_code, unsigned char *scsi3addr,
1502 ctlr_info_t *h= hba[ctlr];
1503 u64bit buff_dma_handle;
1506 c->cmd_type = CMD_IOCTL_PEND;
1507 c->Header.ReplyQueue = 0;
1509 c->Header.SGList = 1;
1510 c->Header.SGTotal= 1;
1512 c->Header.SGList = 0;
1513 c->Header.SGTotal= 0;
1515 c->Header.Tag.lower = c->busaddr;
1517 c->Request.Type.Type = cmd_type;
1518 if (cmd_type == TYPE_CMD) {
1521 /* If the logical unit number is 0 then, this is going
1522 to controller so It's a physical command
1523 mode = 0 target = 0. So we have nothing to write.
1524 otherwise, if use_unit_num == 1,
1525 mode = 1(volume set addressing) target = LUNID
1526 otherwise, if use_unit_num == 2,
1527 mode = 0(periph dev addr) target = scsi3addr */
1528 if (use_unit_num == 1) {
1529 c->Header.LUN.LogDev.VolId=
1530 h->drv[log_unit].LunID;
1531 c->Header.LUN.LogDev.Mode = 1;
1532 } else if (use_unit_num == 2) {
1533 memcpy(c->Header.LUN.LunAddrBytes,scsi3addr,8);
1534 c->Header.LUN.LogDev.Mode = 0;
1536 /* are we trying to read a vital product page */
1537 if(page_code != 0) {
1538 c->Request.CDB[1] = 0x01;
1539 c->Request.CDB[2] = page_code;
1541 c->Request.CDBLen = 6;
1542 c->Request.Type.Attribute = ATTR_SIMPLE;
1543 c->Request.Type.Direction = XFER_READ;
1544 c->Request.Timeout = 0;
1545 c->Request.CDB[0] = CISS_INQUIRY;
1546 c->Request.CDB[4] = size & 0xFF;
1548 case CISS_REPORT_LOG:
1549 case CISS_REPORT_PHYS:
1550 /* Talking to controller so It's a physical command
1551 mode = 00 target = 0. Nothing to write.
1553 c->Request.CDBLen = 12;
1554 c->Request.Type.Attribute = ATTR_SIMPLE;
1555 c->Request.Type.Direction = XFER_READ;
1556 c->Request.Timeout = 0;
1557 c->Request.CDB[0] = cmd;
1558 c->Request.CDB[6] = (size >> 24) & 0xFF; //MSB
1559 c->Request.CDB[7] = (size >> 16) & 0xFF;
1560 c->Request.CDB[8] = (size >> 8) & 0xFF;
1561 c->Request.CDB[9] = size & 0xFF;
1564 case CCISS_READ_CAPACITY:
1565 c->Header.LUN.LogDev.VolId = h->drv[log_unit].LunID;
1566 c->Header.LUN.LogDev.Mode = 1;
1567 c->Request.CDBLen = 10;
1568 c->Request.Type.Attribute = ATTR_SIMPLE;
1569 c->Request.Type.Direction = XFER_READ;
1570 c->Request.Timeout = 0;
1571 c->Request.CDB[0] = cmd;
1573 case CCISS_CACHE_FLUSH:
1574 c->Request.CDBLen = 12;
1575 c->Request.Type.Attribute = ATTR_SIMPLE;
1576 c->Request.Type.Direction = XFER_WRITE;
1577 c->Request.Timeout = 0;
1578 c->Request.CDB[0] = BMIC_WRITE;
1579 c->Request.CDB[6] = BMIC_CACHE_FLUSH;
1583 "cciss%d: Unknown Command 0x%c\n", ctlr, cmd);
1586 } else if (cmd_type == TYPE_MSG) {
1588 case 0: /* ABORT message */
1589 c->Request.CDBLen = 12;
1590 c->Request.Type.Attribute = ATTR_SIMPLE;
1591 c->Request.Type.Direction = XFER_WRITE;
1592 c->Request.Timeout = 0;
1593 c->Request.CDB[0] = cmd; /* abort */
1594 c->Request.CDB[1] = 0; /* abort a command */
1595 /* buff contains the tag of the command to abort */
1596 memcpy(&c->Request.CDB[4], buff, 8);
1598 case 1: /* RESET message */
1599 c->Request.CDBLen = 12;
1600 c->Request.Type.Attribute = ATTR_SIMPLE;
1601 c->Request.Type.Direction = XFER_WRITE;
1602 c->Request.Timeout = 0;
1603 memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
1604 c->Request.CDB[0] = cmd; /* reset */
1605 c->Request.CDB[1] = 0x04; /* reset a LUN */
1606 case 3: /* No-Op message */
1607 c->Request.CDBLen = 1;
1608 c->Request.Type.Attribute = ATTR_SIMPLE;
1609 c->Request.Type.Direction = XFER_WRITE;
1610 c->Request.Timeout = 0;
1611 c->Request.CDB[0] = cmd;
1615 "cciss%d: unknown message type %d\n",
1621 "cciss%d: unknown command type %d\n", ctlr, cmd_type);
1624 /* Fill in the scatter gather information */
1626 buff_dma_handle.val = (__u64) pci_map_single(h->pdev,
1627 buff, size, PCI_DMA_BIDIRECTIONAL);
1628 c->SG[0].Addr.lower = buff_dma_handle.val32.lower;
1629 c->SG[0].Addr.upper = buff_dma_handle.val32.upper;
1630 c->SG[0].Len = size;
1631 c->SG[0].Ext = 0; /* we are not chaining */
1635 static int sendcmd_withirq(__u8 cmd,
1639 unsigned int use_unit_num,
1640 unsigned int log_unit,
1644 ctlr_info_t *h = hba[ctlr];
1645 CommandList_struct *c;
1646 u64bit buff_dma_handle;
1647 unsigned long flags;
1649 DECLARE_COMPLETION(wait);
1651 if ((c = cmd_alloc(h , 0)) == NULL)
1653 return_status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num,
1654 log_unit, page_code, NULL, cmd_type);
1655 if (return_status != IO_OK) {
1657 return return_status;
1662 /* Put the request on the tail of the queue and send it */
1663 spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
1667 spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
1669 wait_for_completion(&wait);
1671 if(c->err_info->CommandStatus != 0)
1672 { /* an error has occurred */
1673 switch(c->err_info->CommandStatus)
1675 case CMD_TARGET_STATUS:
1676 printk(KERN_WARNING "cciss: cmd %p has "
1677 " completed with errors\n", c);
1678 if( c->err_info->ScsiStatus)
1680 printk(KERN_WARNING "cciss: cmd %p "
1681 "has SCSI Status = %x\n",
1683 c->err_info->ScsiStatus);
1687 case CMD_DATA_UNDERRUN:
1688 case CMD_DATA_OVERRUN:
1689 /* expected for inquire and report lun commands */
1692 printk(KERN_WARNING "cciss: Cmd %p is "
1693 "reported invalid\n", c);
1694 return_status = IO_ERROR;
1696 case CMD_PROTOCOL_ERR:
1697 printk(KERN_WARNING "cciss: cmd %p has "
1698 "protocol error \n", c);
1699 return_status = IO_ERROR;
1701 case CMD_HARDWARE_ERR:
1702 printk(KERN_WARNING "cciss: cmd %p had "
1703 " hardware error\n", c);
1704 return_status = IO_ERROR;
1706 case CMD_CONNECTION_LOST:
1707 printk(KERN_WARNING "cciss: cmd %p had "
1708 "connection lost\n", c);
1709 return_status = IO_ERROR;
1712 printk(KERN_WARNING "cciss: cmd %p was "
1714 return_status = IO_ERROR;
1716 case CMD_ABORT_FAILED:
1717 printk(KERN_WARNING "cciss: cmd %p reports "
1718 "abort failed\n", c);
1719 return_status = IO_ERROR;
1721 case CMD_UNSOLICITED_ABORT:
1723 "cciss%d: unsolicited abort %p\n",
1725 if (c->retry_count < MAX_CMD_RETRIES) {
1727 "cciss%d: retrying %p\n",
1730 /* erase the old error information */
1731 memset(c->err_info, 0,
1732 sizeof(ErrorInfo_struct));
1733 return_status = IO_OK;
1734 INIT_COMPLETION(wait);
1737 return_status = IO_ERROR;
1740 printk(KERN_WARNING "cciss: cmd %p returned "
1741 "unknown status %x\n", c,
1742 c->err_info->CommandStatus);
1743 return_status = IO_ERROR;
1746 /* unlock the buffers from DMA */
1747 buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
1748 buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
1749 pci_unmap_single( h->pdev, (dma_addr_t) buff_dma_handle.val,
1750 c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
1752 return(return_status);
1755 static void cciss_geometry_inquiry(int ctlr, int logvol,
1756 int withirq, unsigned int total_size,
1757 unsigned int block_size, InquiryData_struct *inq_buff,
1758 drive_info_struct *drv)
1761 memset(inq_buff, 0, sizeof(InquiryData_struct));
1763 return_code = sendcmd_withirq(CISS_INQUIRY, ctlr,
1764 inq_buff, sizeof(*inq_buff), 1, logvol ,0xC1, TYPE_CMD);
1766 return_code = sendcmd(CISS_INQUIRY, ctlr, inq_buff,
1767 sizeof(*inq_buff), 1, logvol ,0xC1, NULL, TYPE_CMD);
1768 if (return_code == IO_OK) {
1769 if(inq_buff->data_byte[8] == 0xFF) {
1771 "cciss: reading geometry failed, volume "
1772 "does not support reading geometry\n");
1773 drv->block_size = block_size;
1774 drv->nr_blocks = total_size;
1776 drv->sectors = 32; // Sectors per track
1777 drv->cylinders = total_size / 255 / 32;
1781 drv->block_size = block_size;
1782 drv->nr_blocks = total_size;
1783 drv->heads = inq_buff->data_byte[6];
1784 drv->sectors = inq_buff->data_byte[7];
1785 drv->cylinders = (inq_buff->data_byte[4] & 0xff) << 8;
1786 drv->cylinders += inq_buff->data_byte[5];
1787 drv->raid_level = inq_buff->data_byte[8];
1788 t = drv->heads * drv->sectors;
1790 drv->cylinders = total_size/t;
1793 } else { /* Get geometry failed */
1794 printk(KERN_WARNING "cciss: reading geometry failed\n");
1796 printk(KERN_INFO " heads= %d, sectors= %d, cylinders= %d\n\n",
1797 drv->heads, drv->sectors, drv->cylinders);
1800 cciss_read_capacity(int ctlr, int logvol, ReadCapdata_struct *buf,
1801 int withirq, unsigned int *total_size, unsigned int *block_size)
1804 memset(buf, 0, sizeof(*buf));
1806 return_code = sendcmd_withirq(CCISS_READ_CAPACITY,
1807 ctlr, buf, sizeof(*buf), 1, logvol, 0, TYPE_CMD);
1809 return_code = sendcmd(CCISS_READ_CAPACITY,
1810 ctlr, buf, sizeof(*buf), 1, logvol, 0, NULL, TYPE_CMD);
1811 if (return_code == IO_OK) {
1812 *total_size = be32_to_cpu(*((__be32 *) &buf->total_size[0]))+1;
1813 *block_size = be32_to_cpu(*((__be32 *) &buf->block_size[0]));
1814 } else { /* read capacity command failed */
1815 printk(KERN_WARNING "cciss: read capacity failed\n");
1817 *block_size = BLOCK_SIZE;
1819 printk(KERN_INFO " blocks= %u block_size= %d\n",
1820 *total_size, *block_size);
1824 static int cciss_revalidate(struct gendisk *disk)
1826 ctlr_info_t *h = get_host(disk);
1827 drive_info_struct *drv = get_drv(disk);
1830 unsigned int block_size;
1831 unsigned int total_size;
1832 ReadCapdata_struct *size_buff = NULL;
1833 InquiryData_struct *inq_buff = NULL;
1835 for(logvol=0; logvol < CISS_MAX_LUN; logvol++)
1837 if(h->drv[logvol].LunID == drv->LunID) {
1843 if (!FOUND) return 1;
1845 size_buff = kmalloc(sizeof( ReadCapdata_struct), GFP_KERNEL);
1846 if (size_buff == NULL)
1848 printk(KERN_WARNING "cciss: out of memory\n");
1851 inq_buff = kmalloc(sizeof( InquiryData_struct), GFP_KERNEL);
1852 if (inq_buff == NULL)
1854 printk(KERN_WARNING "cciss: out of memory\n");
1859 cciss_read_capacity(h->ctlr, logvol, size_buff, 1, &total_size, &block_size);
1860 cciss_geometry_inquiry(h->ctlr, logvol, 1, total_size, block_size, inq_buff, drv);
1862 blk_queue_hardsect_size(drv->queue, drv->block_size);
1863 set_capacity(disk, drv->nr_blocks);
1871 * Wait polling for a command to complete.
1872 * The memory mapped FIFO is polled for the completion.
1873 * Used only at init time, interrupts from the HBA are disabled.
1875 static unsigned long pollcomplete(int ctlr)
1880 /* Wait (up to 20 seconds) for a command to complete */
1882 for (i = 20 * HZ; i > 0; i--) {
1883 done = hba[ctlr]->access.command_completed(hba[ctlr]);
1884 if (done == FIFO_EMPTY)
1885 schedule_timeout_uninterruptible(1);
1889 /* Invalid address to tell caller we ran out of time */
1893 static int add_sendcmd_reject(__u8 cmd, int ctlr, unsigned long complete)
1895 /* We get in here if sendcmd() is polling for completions
1896 and gets some command back that it wasn't expecting --
1897 something other than that which it just sent down.
1898 Ordinarily, that shouldn't happen, but it can happen when
1899 the scsi tape stuff gets into error handling mode, and
1900 starts using sendcmd() to try to abort commands and
1901 reset tape drives. In that case, sendcmd may pick up
1902 completions of commands that were sent to logical drives
1903 through the block i/o system, or cciss ioctls completing, etc.
1904 In that case, we need to save those completions for later
1905 processing by the interrupt handler.
1908 #ifdef CONFIG_CISS_SCSI_TAPE
1909 struct sendcmd_reject_list *srl = &hba[ctlr]->scsi_rejects;
1911 /* If it's not the scsi tape stuff doing error handling, (abort */
1912 /* or reset) then we don't expect anything weird. */
1913 if (cmd != CCISS_RESET_MSG && cmd != CCISS_ABORT_MSG) {
1915 printk( KERN_WARNING "cciss cciss%d: SendCmd "
1916 "Invalid command list address returned! (%lx)\n",
1918 /* not much we can do. */
1919 #ifdef CONFIG_CISS_SCSI_TAPE
1923 /* We've sent down an abort or reset, but something else
1925 if (srl->ncompletions >= (NR_CMDS + 2)) {
1926 /* Uh oh. No room to save it for later... */
1927 printk(KERN_WARNING "cciss%d: Sendcmd: Invalid command addr, "
1928 "reject list overflow, command lost!\n", ctlr);
1931 /* Save it for later */
1932 srl->complete[srl->ncompletions] = complete;
1933 srl->ncompletions++;
1939 * Send a command to the controller, and wait for it to complete.
1940 * Only used at init time.
1947 unsigned int use_unit_num, /* 0: address the controller,
1948 1: address logical volume log_unit,
1949 2: periph device address is scsi3addr */
1950 unsigned int log_unit,
1952 unsigned char *scsi3addr,
1955 CommandList_struct *c;
1957 unsigned long complete;
1958 ctlr_info_t *info_p= hba[ctlr];
1959 u64bit buff_dma_handle;
1960 int status, done = 0;
1962 if ((c = cmd_alloc(info_p, 1)) == NULL) {
1963 printk(KERN_WARNING "cciss: unable to get memory");
1966 status = fill_cmd(c, cmd, ctlr, buff, size, use_unit_num,
1967 log_unit, page_code, scsi3addr, cmd_type);
1968 if (status != IO_OK) {
1969 cmd_free(info_p, c, 1);
1977 printk(KERN_DEBUG "cciss: turning intr off\n");
1978 #endif /* CCISS_DEBUG */
1979 info_p->access.set_intr_mask(info_p, CCISS_INTR_OFF);
1981 /* Make sure there is room in the command FIFO */
1982 /* Actually it should be completely empty at this time */
1983 /* unless we are in here doing error handling for the scsi */
1984 /* tape side of the driver. */
1985 for (i = 200000; i > 0; i--)
1987 /* if fifo isn't full go */
1988 if (!(info_p->access.fifo_full(info_p)))
1994 printk(KERN_WARNING "cciss cciss%d: SendCmd FIFO full,"
1995 " waiting!\n", ctlr);
2000 info_p->access.submit_command(info_p, c);
2003 complete = pollcomplete(ctlr);
2006 printk(KERN_DEBUG "cciss: command completed\n");
2007 #endif /* CCISS_DEBUG */
2009 if (complete == 1) {
2010 printk( KERN_WARNING
2011 "cciss cciss%d: SendCmd Timeout out, "
2012 "No command list address returned!\n",
2019 /* This will need to change for direct lookup completions */
2020 if ( (complete & CISS_ERROR_BIT)
2021 && (complete & ~CISS_ERROR_BIT) == c->busaddr)
2023 /* if data overrun or underun on Report command
2026 if (((c->Request.CDB[0] == CISS_REPORT_LOG) ||
2027 (c->Request.CDB[0] == CISS_REPORT_PHYS) ||
2028 (c->Request.CDB[0] == CISS_INQUIRY)) &&
2029 ((c->err_info->CommandStatus ==
2030 CMD_DATA_OVERRUN) ||
2031 (c->err_info->CommandStatus ==
2035 complete = c->busaddr;
2037 if (c->err_info->CommandStatus ==
2038 CMD_UNSOLICITED_ABORT) {
2039 printk(KERN_WARNING "cciss%d: "
2040 "unsolicited abort %p\n",
2042 if (c->retry_count < MAX_CMD_RETRIES) {
2044 "cciss%d: retrying %p\n",
2047 /* erase the old error */
2049 memset(c->err_info, 0,
2050 sizeof(ErrorInfo_struct));
2054 "cciss%d: retried %p too "
2055 "many times\n", ctlr, c);
2059 } else if (c->err_info->CommandStatus == CMD_UNABORTABLE) {
2060 printk(KERN_WARNING "cciss%d: command could not be aborted.\n", ctlr);
2064 printk(KERN_WARNING "ciss ciss%d: sendcmd"
2065 " Error %x \n", ctlr,
2066 c->err_info->CommandStatus);
2067 printk(KERN_WARNING "ciss ciss%d: sendcmd"
2069 " size %x\n num %x value %x\n", ctlr,
2070 c->err_info->MoreErrInfo.Invalid_Cmd.offense_size,
2071 c->err_info->MoreErrInfo.Invalid_Cmd.offense_num,
2072 c->err_info->MoreErrInfo.Invalid_Cmd.offense_value);
2077 /* This will need changing for direct lookup completions */
2078 if (complete != c->busaddr) {
2079 if (add_sendcmd_reject(cmd, ctlr, complete) != 0) {
2080 BUG(); /* we are pretty much hosed if we get here. */
2088 /* unlock the data buffer from DMA */
2089 buff_dma_handle.val32.lower = c->SG[0].Addr.lower;
2090 buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
2091 pci_unmap_single(info_p->pdev, (dma_addr_t) buff_dma_handle.val,
2092 c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
2093 #ifdef CONFIG_CISS_SCSI_TAPE
2094 /* if we saved some commands for later, process them now. */
2095 if (info_p->scsi_rejects.ncompletions > 0)
2096 do_cciss_intr(0, info_p, NULL);
2098 cmd_free(info_p, c, 1);
2102 * Map (physical) PCI mem into (virtual) kernel space
2104 static void __iomem *remap_pci_mem(ulong base, ulong size)
2106 ulong page_base = ((ulong) base) & PAGE_MASK;
2107 ulong page_offs = ((ulong) base) - page_base;
2108 void __iomem *page_remapped = ioremap(page_base, page_offs+size);
2110 return page_remapped ? (page_remapped + page_offs) : NULL;
2114 * Takes jobs of the Q and sends them to the hardware, then puts it on
2115 * the Q to wait for completion.
2117 static void start_io( ctlr_info_t *h)
2119 CommandList_struct *c;
2121 while(( c = h->reqQ) != NULL )
2123 /* can't do anything if fifo is full */
2124 if ((h->access.fifo_full(h))) {
2125 printk(KERN_WARNING "cciss: fifo full\n");
2129 /* Get the frist entry from the Request Q */
2130 removeQ(&(h->reqQ), c);
2133 /* Tell the controller execute command */
2134 h->access.submit_command(h, c);
2136 /* Put job onto the completed Q */
2137 addQ (&(h->cmpQ), c);
2141 static inline void complete_buffers(struct bio *bio, int status)
2144 struct bio *xbh = bio->bi_next;
2145 int nr_sectors = bio_sectors(bio);
2147 bio->bi_next = NULL;
2148 blk_finished_io(len);
2149 bio_endio(bio, nr_sectors << 9, status ? 0 : -EIO);
2154 /* Assumes that CCISS_LOCK(h->ctlr) is held. */
2155 /* Zeros out the error record and then resends the command back */
2156 /* to the controller */
2157 static inline void resend_cciss_cmd( ctlr_info_t *h, CommandList_struct *c)
2159 /* erase the old error information */
2160 memset(c->err_info, 0, sizeof(ErrorInfo_struct));
2162 /* add it to software queue and then send it to the controller */
2165 if(h->Qdepth > h->maxQsinceinit)
2166 h->maxQsinceinit = h->Qdepth;
2170 /* checks the status of the job and calls complete buffers to mark all
2171 * buffers for the completed job.
2173 static inline void complete_command( ctlr_info_t *h, CommandList_struct *cmd,
2184 if(cmd->err_info->CommandStatus != 0)
2185 { /* an error has occurred */
2186 switch(cmd->err_info->CommandStatus)
2188 unsigned char sense_key;
2189 case CMD_TARGET_STATUS:
2192 if( cmd->err_info->ScsiStatus == 0x02)
2194 printk(KERN_WARNING "cciss: cmd %p "
2195 "has CHECK CONDITION "
2196 " byte 2 = 0x%x\n", cmd,
2197 cmd->err_info->SenseInfo[2]
2199 /* check the sense key */
2201 cmd->err_info->SenseInfo[2];
2202 /* no status or recovered error */
2203 if((sense_key == 0x0) ||
2210 printk(KERN_WARNING "cciss: cmd %p "
2211 "has SCSI Status 0x%x\n",
2212 cmd, cmd->err_info->ScsiStatus);
2215 case CMD_DATA_UNDERRUN:
2216 printk(KERN_WARNING "cciss: cmd %p has"
2217 " completed with data underrun "
2220 case CMD_DATA_OVERRUN:
2221 printk(KERN_WARNING "cciss: cmd %p has"
2222 " completed with data overrun "
2226 printk(KERN_WARNING "cciss: cmd %p is "
2227 "reported invalid\n", cmd);
2230 case CMD_PROTOCOL_ERR:
2231 printk(KERN_WARNING "cciss: cmd %p has "
2232 "protocol error \n", cmd);
2235 case CMD_HARDWARE_ERR:
2236 printk(KERN_WARNING "cciss: cmd %p had "
2237 " hardware error\n", cmd);
2240 case CMD_CONNECTION_LOST:
2241 printk(KERN_WARNING "cciss: cmd %p had "
2242 "connection lost\n", cmd);
2246 printk(KERN_WARNING "cciss: cmd %p was "
2250 case CMD_ABORT_FAILED:
2251 printk(KERN_WARNING "cciss: cmd %p reports "
2252 "abort failed\n", cmd);
2255 case CMD_UNSOLICITED_ABORT:
2256 printk(KERN_WARNING "cciss%d: unsolicited "
2257 "abort %p\n", h->ctlr, cmd);
2258 if (cmd->retry_count < MAX_CMD_RETRIES) {
2261 "cciss%d: retrying %p\n",
2266 "cciss%d: %p retried too "
2267 "many times\n", h->ctlr, cmd);
2271 printk(KERN_WARNING "cciss: cmd %p timedout\n",
2276 printk(KERN_WARNING "cciss: cmd %p returned "
2277 "unknown status %x\n", cmd,
2278 cmd->err_info->CommandStatus);
2282 /* We need to return this command */
2284 resend_cciss_cmd(h,cmd);
2287 /* command did not need to be retried */
2288 /* unmap the DMA mapping for all the scatter gather elements */
2289 for(i=0; i<cmd->Header.SGList; i++) {
2290 temp64.val32.lower = cmd->SG[i].Addr.lower;
2291 temp64.val32.upper = cmd->SG[i].Addr.upper;
2292 pci_unmap_page(hba[cmd->ctlr]->pdev,
2293 temp64.val, cmd->SG[i].Len,
2294 (cmd->Request.Type.Direction == XFER_READ) ?
2295 PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE);
2297 complete_buffers(cmd->rq->bio, status);
2300 printk("Done with %p\n", cmd->rq);
2301 #endif /* CCISS_DEBUG */
2303 end_that_request_last(cmd->rq);
2308 * Get a request and submit it to the controller.
2310 static void do_cciss_request(request_queue_t *q)
2312 ctlr_info_t *h= q->queuedata;
2313 CommandList_struct *c;
2315 struct request *creq;
2317 struct scatterlist tmp_sg[MAXSGENTRIES];
2318 drive_info_struct *drv;
2321 /* We call start_io here in case there is a command waiting on the
2322 * queue that has not been sent.
2324 if (blk_queue_plugged(q))
2328 creq = elv_next_request(q);
2332 if (creq->nr_phys_segments > MAXSGENTRIES)
2335 if (( c = cmd_alloc(h, 1)) == NULL)
2338 blkdev_dequeue_request(creq);
2340 spin_unlock_irq(q->queue_lock);
2342 c->cmd_type = CMD_RWREQ;
2345 /* fill in the request */
2346 drv = creq->rq_disk->private_data;
2347 c->Header.ReplyQueue = 0; // unused in simple mode
2348 /* got command from pool, so use the command block index instead */
2349 /* for direct lookups. */
2350 /* The first 2 bits are reserved for controller error reporting. */
2351 c->Header.Tag.lower = (c->cmdindex << 3);
2352 c->Header.Tag.lower |= 0x04; /* flag for direct lookup. */
2353 c->Header.LUN.LogDev.VolId= drv->LunID;
2354 c->Header.LUN.LogDev.Mode = 1;
2355 c->Request.CDBLen = 10; // 12 byte commands not in FW yet;
2356 c->Request.Type.Type = TYPE_CMD; // It is a command.
2357 c->Request.Type.Attribute = ATTR_SIMPLE;
2358 c->Request.Type.Direction =
2359 (rq_data_dir(creq) == READ) ? XFER_READ: XFER_WRITE;
2360 c->Request.Timeout = 0; // Don't time out
2361 c->Request.CDB[0] = (rq_data_dir(creq) == READ) ? CCISS_READ : CCISS_WRITE;
2362 start_blk = creq->sector;
2364 printk(KERN_DEBUG "ciss: sector =%d nr_sectors=%d\n",(int) creq->sector,
2365 (int) creq->nr_sectors);
2366 #endif /* CCISS_DEBUG */
2368 seg = blk_rq_map_sg(q, creq, tmp_sg);
2370 /* get the DMA records for the setup */
2371 if (c->Request.Type.Direction == XFER_READ)
2372 dir = PCI_DMA_FROMDEVICE;
2374 dir = PCI_DMA_TODEVICE;
2376 for (i=0; i<seg; i++)
2378 c->SG[i].Len = tmp_sg[i].length;
2379 temp64.val = (__u64) pci_map_page(h->pdev, tmp_sg[i].page,
2380 tmp_sg[i].offset, tmp_sg[i].length,
2382 c->SG[i].Addr.lower = temp64.val32.lower;
2383 c->SG[i].Addr.upper = temp64.val32.upper;
2384 c->SG[i].Ext = 0; // we are not chaining
2386 /* track how many SG entries we are using */
2391 printk(KERN_DEBUG "cciss: Submitting %d sectors in %d segments\n", creq->nr_sectors, seg);
2392 #endif /* CCISS_DEBUG */
2394 c->Header.SGList = c->Header.SGTotal = seg;
2395 c->Request.CDB[1]= 0;
2396 c->Request.CDB[2]= (start_blk >> 24) & 0xff; //MSB
2397 c->Request.CDB[3]= (start_blk >> 16) & 0xff;
2398 c->Request.CDB[4]= (start_blk >> 8) & 0xff;
2399 c->Request.CDB[5]= start_blk & 0xff;
2400 c->Request.CDB[6]= 0; // (sect >> 24) & 0xff; MSB
2401 c->Request.CDB[7]= (creq->nr_sectors >> 8) & 0xff;
2402 c->Request.CDB[8]= creq->nr_sectors & 0xff;
2403 c->Request.CDB[9] = c->Request.CDB[11] = c->Request.CDB[12] = 0;
2405 spin_lock_irq(q->queue_lock);
2409 if(h->Qdepth > h->maxQsinceinit)
2410 h->maxQsinceinit = h->Qdepth;
2416 /* We will already have the driver lock here so not need
2422 static inline unsigned long get_next_completion(ctlr_info_t *h)
2424 #ifdef CONFIG_CISS_SCSI_TAPE
2425 /* Any rejects from sendcmd() lying around? Process them first */
2426 if (h->scsi_rejects.ncompletions == 0)
2427 return h->access.command_completed(h);
2429 struct sendcmd_reject_list *srl;
2431 srl = &h->scsi_rejects;
2432 n = --srl->ncompletions;
2433 /* printk("cciss%d: processing saved reject\n", h->ctlr); */
2435 return srl->complete[n];
2438 return h->access.command_completed(h);
2442 static inline int interrupt_pending(ctlr_info_t *h)
2444 #ifdef CONFIG_CISS_SCSI_TAPE
2445 return ( h->access.intr_pending(h)
2446 || (h->scsi_rejects.ncompletions > 0));
2448 return h->access.intr_pending(h);
2452 static inline long interrupt_not_for_us(ctlr_info_t *h)
2454 #ifdef CONFIG_CISS_SCSI_TAPE
2455 return (((h->access.intr_pending(h) == 0) ||
2456 (h->interrupts_enabled == 0))
2457 && (h->scsi_rejects.ncompletions == 0));
2459 return (((h->access.intr_pending(h) == 0) ||
2460 (h->interrupts_enabled == 0)));
2464 static irqreturn_t do_cciss_intr(int irq, void *dev_id, struct pt_regs *regs)
2466 ctlr_info_t *h = dev_id;
2467 CommandList_struct *c;
2468 unsigned long flags;
2471 int start_queue = h->next_to_run;
2473 if (interrupt_not_for_us(h))
2476 * If there are completed commands in the completion queue,
2477 * we had better do something about it.
2479 spin_lock_irqsave(CCISS_LOCK(h->ctlr), flags);
2480 while (interrupt_pending(h)) {
2481 while((a = get_next_completion(h)) != FIFO_EMPTY) {
2485 if (a2 >= NR_CMDS) {
2486 printk(KERN_WARNING "cciss: controller cciss%d failed, stopping.\n", h->ctlr);
2487 fail_all_cmds(h->ctlr);
2491 c = h->cmd_pool + a2;
2496 if ((c = h->cmpQ) == NULL) {
2497 printk(KERN_WARNING "cciss: Completion of %08x ignored\n", a1);
2500 while(c->busaddr != a) {
2507 * If we've found the command, take it off the
2508 * completion Q and free it
2510 if (c->busaddr == a) {
2511 removeQ(&h->cmpQ, c);
2512 if (c->cmd_type == CMD_RWREQ) {
2513 complete_command(h, c, 0);
2514 } else if (c->cmd_type == CMD_IOCTL_PEND) {
2515 complete(c->waiting);
2517 # ifdef CONFIG_CISS_SCSI_TAPE
2518 else if (c->cmd_type == CMD_SCSI)
2519 complete_scsi_command(c, 0, a1);
2526 /* check to see if we have maxed out the number of commands that can
2527 * be placed on the queue. If so then exit. We do this check here
2528 * in case the interrupt we serviced was from an ioctl and did not
2529 * free any new commands.
2531 if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS)
2534 /* We have room on the queue for more commands. Now we need to queue
2535 * them up. We will also keep track of the next queue to run so
2536 * that every queue gets a chance to be started first.
2538 for (j=0; j < h->highest_lun + 1; j++){
2539 int curr_queue = (start_queue + j) % (h->highest_lun + 1);
2540 /* make sure the disk has been added and the drive is real
2541 * because this can be called from the middle of init_one.
2543 if(!(h->drv[curr_queue].queue) ||
2544 !(h->drv[curr_queue].heads))
2546 blk_start_queue(h->gendisk[curr_queue]->queue);
2548 /* check to see if we have maxed out the number of commands
2549 * that can be placed on the queue.
2551 if ((find_first_zero_bit(h->cmd_pool_bits, NR_CMDS)) == NR_CMDS)
2553 if (curr_queue == start_queue){
2554 h->next_to_run = (start_queue + 1) % (h->highest_lun + 1);
2557 h->next_to_run = curr_queue;
2561 curr_queue = (curr_queue + 1) % (h->highest_lun + 1);
2566 spin_unlock_irqrestore(CCISS_LOCK(h->ctlr), flags);
2570 * We cannot read the structure directly, for portablity we must use
2572 * This is for debug only.
2575 static void print_cfg_table( CfgTable_struct *tb)
2580 printk("Controller Configuration information\n");
2581 printk("------------------------------------\n");
2583 temp_name[i] = readb(&(tb->Signature[i]));
2585 printk(" Signature = %s\n", temp_name);
2586 printk(" Spec Number = %d\n", readl(&(tb->SpecValence)));
2587 printk(" Transport methods supported = 0x%x\n",
2588 readl(&(tb-> TransportSupport)));
2589 printk(" Transport methods active = 0x%x\n",
2590 readl(&(tb->TransportActive)));
2591 printk(" Requested transport Method = 0x%x\n",
2592 readl(&(tb->HostWrite.TransportRequest)));
2593 printk(" Coalese Interrupt Delay = 0x%x\n",
2594 readl(&(tb->HostWrite.CoalIntDelay)));
2595 printk(" Coalese Interrupt Count = 0x%x\n",
2596 readl(&(tb->HostWrite.CoalIntCount)));
2597 printk(" Max outstanding commands = 0x%d\n",
2598 readl(&(tb->CmdsOutMax)));
2599 printk(" Bus Types = 0x%x\n", readl(&(tb-> BusTypes)));
2601 temp_name[i] = readb(&(tb->ServerName[i]));
2602 temp_name[16] = '\0';
2603 printk(" Server Name = %s\n", temp_name);
2604 printk(" Heartbeat Counter = 0x%x\n\n\n",
2605 readl(&(tb->HeartBeat)));
2607 #endif /* CCISS_DEBUG */
2609 static void release_io_mem(ctlr_info_t *c)
2611 /* if IO mem was not protected do nothing */
2612 if( c->io_mem_addr == 0)
2614 release_region(c->io_mem_addr, c->io_mem_length);
2616 c->io_mem_length = 0;
2619 static int find_PCI_BAR_index(struct pci_dev *pdev,
2620 unsigned long pci_bar_addr)
2622 int i, offset, mem_type, bar_type;
2623 if (pci_bar_addr == PCI_BASE_ADDRESS_0) /* looking for BAR zero? */
2626 for (i=0; i<DEVICE_COUNT_RESOURCE; i++) {
2627 bar_type = pci_resource_flags(pdev, i) &
2628 PCI_BASE_ADDRESS_SPACE;
2629 if (bar_type == PCI_BASE_ADDRESS_SPACE_IO)
2632 mem_type = pci_resource_flags(pdev, i) &
2633 PCI_BASE_ADDRESS_MEM_TYPE_MASK;
2635 case PCI_BASE_ADDRESS_MEM_TYPE_32:
2636 case PCI_BASE_ADDRESS_MEM_TYPE_1M:
2637 offset += 4; /* 32 bit */
2639 case PCI_BASE_ADDRESS_MEM_TYPE_64:
2642 default: /* reserved in PCI 2.2 */
2643 printk(KERN_WARNING "Base address is invalid\n");
2648 if (offset == pci_bar_addr - PCI_BASE_ADDRESS_0)
2654 static int cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev)
2656 ushort subsystem_vendor_id, subsystem_device_id, command;
2657 __u32 board_id, scratchpad = 0;
2659 __u32 cfg_base_addr;
2660 __u64 cfg_base_addr_index;
2663 /* check to see if controller has been disabled */
2664 /* BEFORE trying to enable it */
2665 (void) pci_read_config_word(pdev, PCI_COMMAND,&command);
2666 if(!(command & 0x02))
2668 printk(KERN_WARNING "cciss: controller appears to be disabled\n");
2672 if (pci_enable_device(pdev))
2674 printk(KERN_ERR "cciss: Unable to Enable PCI device\n");
2678 subsystem_vendor_id = pdev->subsystem_vendor;
2679 subsystem_device_id = pdev->subsystem_device;
2680 board_id = (((__u32) (subsystem_device_id << 16) & 0xffff0000) |
2681 subsystem_vendor_id);
2683 /* search for our IO range so we can protect it */
2684 for(i=0; i<DEVICE_COUNT_RESOURCE; i++)
2686 /* is this an IO range */
2687 if( pci_resource_flags(pdev, i) & 0x01 ) {
2688 c->io_mem_addr = pci_resource_start(pdev, i);
2689 c->io_mem_length = pci_resource_end(pdev, i) -
2690 pci_resource_start(pdev, i) +1;
2692 printk("IO value found base_addr[%d] %lx %lx\n", i,
2693 c->io_mem_addr, c->io_mem_length);
2694 #endif /* CCISS_DEBUG */
2695 /* register the IO range */
2696 if(!request_region( c->io_mem_addr,
2697 c->io_mem_length, "cciss"))
2699 printk(KERN_WARNING "cciss I/O memory range already in use addr=%lx length=%ld\n",
2700 c->io_mem_addr, c->io_mem_length);
2702 c->io_mem_length = 0;
2709 printk("command = %x\n", command);
2710 printk("irq = %x\n", pdev->irq);
2711 printk("board_id = %x\n", board_id);
2712 #endif /* CCISS_DEBUG */
2714 c->intr = pdev->irq;
2717 * Memory base addr is first addr , the second points to the config
2721 c->paddr = pci_resource_start(pdev, 0); /* addressing mode bits already removed */
2723 printk("address 0 = %x\n", c->paddr);
2724 #endif /* CCISS_DEBUG */
2725 c->vaddr = remap_pci_mem(c->paddr, 200);
2727 /* Wait for the board to become ready. (PCI hotplug needs this.)
2728 * We poll for up to 120 secs, once per 100ms. */
2729 for (i=0; i < 1200; i++) {
2730 scratchpad = readl(c->vaddr + SA5_SCRATCHPAD_OFFSET);
2731 if (scratchpad == CCISS_FIRMWARE_READY)
2733 set_current_state(TASK_INTERRUPTIBLE);
2734 schedule_timeout(HZ / 10); /* wait 100ms */
2736 if (scratchpad != CCISS_FIRMWARE_READY) {
2737 printk(KERN_WARNING "cciss: Board not ready. Timed out.\n");
2741 /* get the address index number */
2742 cfg_base_addr = readl(c->vaddr + SA5_CTCFG_OFFSET);
2743 cfg_base_addr &= (__u32) 0x0000ffff;
2745 printk("cfg base address = %x\n", cfg_base_addr);
2746 #endif /* CCISS_DEBUG */
2747 cfg_base_addr_index =
2748 find_PCI_BAR_index(pdev, cfg_base_addr);
2750 printk("cfg base address index = %x\n", cfg_base_addr_index);
2751 #endif /* CCISS_DEBUG */
2752 if (cfg_base_addr_index == -1) {
2753 printk(KERN_WARNING "cciss: Cannot find cfg_base_addr_index\n");
2758 cfg_offset = readl(c->vaddr + SA5_CTMEM_OFFSET);
2760 printk("cfg offset = %x\n", cfg_offset);
2761 #endif /* CCISS_DEBUG */
2762 c->cfgtable = remap_pci_mem(pci_resource_start(pdev,
2763 cfg_base_addr_index) + cfg_offset,
2764 sizeof(CfgTable_struct));
2765 c->board_id = board_id;
2768 print_cfg_table(c->cfgtable);
2769 #endif /* CCISS_DEBUG */
2771 for(i=0; i<NR_PRODUCTS; i++) {
2772 if (board_id == products[i].board_id) {
2773 c->product_name = products[i].product_name;
2774 c->access = *(products[i].access);
2778 if (i == NR_PRODUCTS) {
2779 printk(KERN_WARNING "cciss: Sorry, I don't know how"
2780 " to access the Smart Array controller %08lx\n",
2781 (unsigned long)board_id);
2784 if ( (readb(&c->cfgtable->Signature[0]) != 'C') ||
2785 (readb(&c->cfgtable->Signature[1]) != 'I') ||
2786 (readb(&c->cfgtable->Signature[2]) != 'S') ||
2787 (readb(&c->cfgtable->Signature[3]) != 'S') )
2789 printk("Does not appear to be a valid CISS config table\n");
2795 /* Need to enable prefetch in the SCSI core for 6400 in x86 */
2797 prefetch = readl(&(c->cfgtable->SCSI_Prefetch));
2799 writel(prefetch, &(c->cfgtable->SCSI_Prefetch));
2804 printk("Trying to put board into Simple mode\n");
2805 #endif /* CCISS_DEBUG */
2806 c->max_commands = readl(&(c->cfgtable->CmdsOutMax));
2807 /* Update the field, and then ring the doorbell */
2808 writel( CFGTBL_Trans_Simple,
2809 &(c->cfgtable->HostWrite.TransportRequest));
2810 writel( CFGTBL_ChangeReq, c->vaddr + SA5_DOORBELL);
2812 /* under certain very rare conditions, this can take awhile.
2813 * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
2814 * as we enter this code.) */
2815 for(i=0;i<MAX_CONFIG_WAIT;i++) {
2816 if (!(readl(c->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
2818 /* delay and try again */
2819 set_current_state(TASK_INTERRUPTIBLE);
2820 schedule_timeout(10);
2824 printk(KERN_DEBUG "I counter got to %d %x\n", i, readl(c->vaddr + SA5_DOORBELL));
2825 #endif /* CCISS_DEBUG */
2827 print_cfg_table(c->cfgtable);
2828 #endif /* CCISS_DEBUG */
2830 if (!(readl(&(c->cfgtable->TransportActive)) & CFGTBL_Trans_Simple))
2832 printk(KERN_WARNING "cciss: unable to get board into"
2841 * Gets information about the local volumes attached to the controller.
2843 static void cciss_getgeometry(int cntl_num)
2845 ReportLunData_struct *ld_buff;
2846 ReadCapdata_struct *size_buff;
2847 InquiryData_struct *inq_buff;
2855 ld_buff = kmalloc(sizeof(ReportLunData_struct), GFP_KERNEL);
2856 if (ld_buff == NULL)
2858 printk(KERN_ERR "cciss: out of memory\n");
2861 memset(ld_buff, 0, sizeof(ReportLunData_struct));
2862 size_buff = kmalloc(sizeof( ReadCapdata_struct), GFP_KERNEL);
2863 if (size_buff == NULL)
2865 printk(KERN_ERR "cciss: out of memory\n");
2869 inq_buff = kmalloc(sizeof( InquiryData_struct), GFP_KERNEL);
2870 if (inq_buff == NULL)
2872 printk(KERN_ERR "cciss: out of memory\n");
2877 /* Get the firmware version */
2878 return_code = sendcmd(CISS_INQUIRY, cntl_num, inq_buff,
2879 sizeof(InquiryData_struct), 0, 0 ,0, NULL, TYPE_CMD);
2880 if (return_code == IO_OK)
2882 hba[cntl_num]->firm_ver[0] = inq_buff->data_byte[32];
2883 hba[cntl_num]->firm_ver[1] = inq_buff->data_byte[33];
2884 hba[cntl_num]->firm_ver[2] = inq_buff->data_byte[34];
2885 hba[cntl_num]->firm_ver[3] = inq_buff->data_byte[35];
2886 } else /* send command failed */
2888 printk(KERN_WARNING "cciss: unable to determine firmware"
2889 " version of controller\n");
2891 /* Get the number of logical volumes */
2892 return_code = sendcmd(CISS_REPORT_LOG, cntl_num, ld_buff,
2893 sizeof(ReportLunData_struct), 0, 0, 0, NULL, TYPE_CMD);
2895 if( return_code == IO_OK)
2898 printk("LUN Data\n--------------------------\n");
2899 #endif /* CCISS_DEBUG */
2901 listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[0])) << 24;
2902 listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[1])) << 16;
2903 listlength |= (0xff & (unsigned int)(ld_buff->LUNListLength[2])) << 8;
2904 listlength |= 0xff & (unsigned int)(ld_buff->LUNListLength[3]);
2905 } else /* reading number of logical volumes failed */
2907 printk(KERN_WARNING "cciss: report logical volume"
2908 " command failed\n");
2911 hba[cntl_num]->num_luns = listlength / 8; // 8 bytes pre entry
2912 if (hba[cntl_num]->num_luns > CISS_MAX_LUN)
2914 printk(KERN_ERR "ciss: only %d number of logical volumes supported\n",
2916 hba[cntl_num]->num_luns = CISS_MAX_LUN;
2919 printk(KERN_DEBUG "Length = %x %x %x %x = %d\n", ld_buff->LUNListLength[0],
2920 ld_buff->LUNListLength[1], ld_buff->LUNListLength[2],
2921 ld_buff->LUNListLength[3], hba[cntl_num]->num_luns);
2922 #endif /* CCISS_DEBUG */
2924 hba[cntl_num]->highest_lun = hba[cntl_num]->num_luns-1;
2925 // for(i=0; i< hba[cntl_num]->num_luns; i++)
2926 for(i=0; i < CISS_MAX_LUN; i++)
2928 if (i < hba[cntl_num]->num_luns){
2929 lunid = (0xff & (unsigned int)(ld_buff->LUN[i][3]))
2931 lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][2]))
2933 lunid |= (0xff & (unsigned int)(ld_buff->LUN[i][1]))
2935 lunid |= 0xff & (unsigned int)(ld_buff->LUN[i][0]);
2937 hba[cntl_num]->drv[i].LunID = lunid;
2941 printk(KERN_DEBUG "LUN[%d]: %x %x %x %x = %x\n", i,
2942 ld_buff->LUN[i][0], ld_buff->LUN[i][1],
2943 ld_buff->LUN[i][2], ld_buff->LUN[i][3],
2944 hba[cntl_num]->drv[i].LunID);
2945 #endif /* CCISS_DEBUG */
2946 cciss_read_capacity(cntl_num, i, size_buff, 0,
2947 &total_size, &block_size);
2948 cciss_geometry_inquiry(cntl_num, i, 0, total_size,
2949 block_size, inq_buff, &hba[cntl_num]->drv[i]);
2951 /* initialize raid_level to indicate a free space */
2952 hba[cntl_num]->drv[i].raid_level = -1;
2960 /* Function to find the first free pointer into our hba[] array */
2961 /* Returns -1 if no free entries are left. */
2962 static int alloc_cciss_hba(void)
2964 struct gendisk *disk[NWD];
2966 for (n = 0; n < NWD; n++) {
2967 disk[n] = alloc_disk(1 << NWD_SHIFT);
2972 for(i=0; i< MAX_CTLR; i++) {
2975 p = kmalloc(sizeof(ctlr_info_t), GFP_KERNEL);
2978 memset(p, 0, sizeof(ctlr_info_t));
2979 for (n = 0; n < NWD; n++)
2980 p->gendisk[n] = disk[n];
2985 printk(KERN_WARNING "cciss: This driver supports a maximum"
2986 " of %d controllers.\n", MAX_CTLR);
2989 printk(KERN_ERR "cciss: out of memory.\n");
2996 static void free_hba(int i)
2998 ctlr_info_t *p = hba[i];
3002 for (n = 0; n < NWD; n++)
3003 put_disk(p->gendisk[n]);
3008 * This is it. Find all the controllers and register them. I really hate
3009 * stealing all these major device numbers.
3010 * returns the number of block devices registered.
3012 static int __devinit cciss_init_one(struct pci_dev *pdev,
3013 const struct pci_device_id *ent)
3020 printk(KERN_DEBUG "cciss: Device 0x%x has been found at"
3021 " bus %d dev %d func %d\n",
3022 pdev->device, pdev->bus->number, PCI_SLOT(pdev->devfn),
3023 PCI_FUNC(pdev->devfn));
3024 i = alloc_cciss_hba();
3028 hba[i]->busy_initializing = 1;
3030 if (cciss_pci_init(hba[i], pdev) != 0)
3033 sprintf(hba[i]->devname, "cciss%d", i);
3035 hba[i]->pdev = pdev;
3037 /* configure PCI DMA stuff */
3038 if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK))
3039 printk("cciss: using DAC cycles\n");
3040 else if (!pci_set_dma_mask(pdev, DMA_32BIT_MASK))
3041 printk("cciss: not using DAC cycles\n");
3043 printk("cciss: no suitable DMA available\n");
3048 * register with the major number, or get a dynamic major number
3049 * by passing 0 as argument. This is done for greater than
3050 * 8 controller support.
3052 if (i < MAX_CTLR_ORIG)
3053 hba[i]->major = MAJOR_NR + i;
3054 rc = register_blkdev(hba[i]->major, hba[i]->devname);
3055 if(rc == -EBUSY || rc == -EINVAL) {
3057 "cciss: Unable to get major number %d for %s "
3058 "on hba %d\n", hba[i]->major, hba[i]->devname, i);
3062 if (i >= MAX_CTLR_ORIG)
3066 /* make sure the board interrupts are off */
3067 hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_OFF);
3068 if( request_irq(hba[i]->intr, do_cciss_intr,
3069 SA_INTERRUPT | SA_SHIRQ | SA_SAMPLE_RANDOM,
3070 hba[i]->devname, hba[i])) {
3071 printk(KERN_ERR "cciss: Unable to get irq %d for %s\n",
3072 hba[i]->intr, hba[i]->devname);
3075 hba[i]->cmd_pool_bits = kmalloc(((NR_CMDS+BITS_PER_LONG-1)/BITS_PER_LONG)*sizeof(unsigned long), GFP_KERNEL);
3076 hba[i]->cmd_pool = (CommandList_struct *)pci_alloc_consistent(
3077 hba[i]->pdev, NR_CMDS * sizeof(CommandList_struct),
3078 &(hba[i]->cmd_pool_dhandle));
3079 hba[i]->errinfo_pool = (ErrorInfo_struct *)pci_alloc_consistent(
3080 hba[i]->pdev, NR_CMDS * sizeof( ErrorInfo_struct),
3081 &(hba[i]->errinfo_pool_dhandle));
3082 if((hba[i]->cmd_pool_bits == NULL)
3083 || (hba[i]->cmd_pool == NULL)
3084 || (hba[i]->errinfo_pool == NULL)) {
3085 printk( KERN_ERR "cciss: out of memory");
3088 #ifdef CONFIG_CISS_SCSI_TAPE
3089 hba[i]->scsi_rejects.complete =
3090 kmalloc(sizeof(hba[i]->scsi_rejects.complete[0]) *
3091 (NR_CMDS + 5), GFP_KERNEL);
3092 if (hba[i]->scsi_rejects.complete == NULL) {
3093 printk( KERN_ERR "cciss: out of memory");
3097 spin_lock_init(&hba[i]->lock);
3099 /* Initialize the pdev driver private data.
3100 have it point to hba[i]. */
3101 pci_set_drvdata(pdev, hba[i]);
3102 /* command and error info recs zeroed out before
3104 memset(hba[i]->cmd_pool_bits, 0, ((NR_CMDS+BITS_PER_LONG-1)/BITS_PER_LONG)*sizeof(unsigned long));
3107 printk(KERN_DEBUG "Scanning for drives on controller cciss%d\n",i);
3108 #endif /* CCISS_DEBUG */
3110 cciss_getgeometry(i);
3112 cciss_scsi_setup(i);
3114 /* Turn the interrupts on so we can service requests */
3115 hba[i]->access.set_intr_mask(hba[i], CCISS_INTR_ON);
3118 hba[i]->busy_initializing = 0;
3120 for(j=0; j < NWD; j++) { /* mfm */
3121 drive_info_struct *drv = &(hba[i]->drv[j]);
3122 struct gendisk *disk = hba[i]->gendisk[j];
3124 q = blk_init_queue(do_cciss_request, &hba[i]->lock);
3127 "cciss: unable to allocate queue for disk %d\n",
3133 q->backing_dev_info.ra_pages = READ_AHEAD;
3134 blk_queue_bounce_limit(q, hba[i]->pdev->dma_mask);
3136 /* This is a hardware imposed limit. */
3137 blk_queue_max_hw_segments(q, MAXSGENTRIES);
3139 /* This is a limit in the driver and could be eliminated. */
3140 blk_queue_max_phys_segments(q, MAXSGENTRIES);
3142 blk_queue_max_sectors(q, 512);
3144 q->queuedata = hba[i];
3145 sprintf(disk->disk_name, "cciss/c%dd%d", i, j);
3146 sprintf(disk->devfs_name, "cciss/host%d/target%d", i, j);
3147 disk->major = hba[i]->major;
3148 disk->first_minor = j << NWD_SHIFT;
3149 disk->fops = &cciss_fops;
3151 disk->private_data = drv;
3152 /* we must register the controller even if no disks exist */
3153 /* this is for the online array utilities */
3154 if(!drv->heads && j)
3156 blk_queue_hardsect_size(q, drv->block_size);
3157 set_capacity(disk, drv->nr_blocks);
3164 #ifdef CONFIG_CISS_SCSI_TAPE
3165 if(hba[i]->scsi_rejects.complete)
3166 kfree(hba[i]->scsi_rejects.complete);
3168 kfree(hba[i]->cmd_pool_bits);
3169 if(hba[i]->cmd_pool)
3170 pci_free_consistent(hba[i]->pdev,
3171 NR_CMDS * sizeof(CommandList_struct),
3172 hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
3173 if(hba[i]->errinfo_pool)
3174 pci_free_consistent(hba[i]->pdev,
3175 NR_CMDS * sizeof( ErrorInfo_struct),
3176 hba[i]->errinfo_pool,
3177 hba[i]->errinfo_pool_dhandle);
3178 free_irq(hba[i]->intr, hba[i]);
3180 unregister_blkdev(hba[i]->major, hba[i]->devname);
3182 release_io_mem(hba[i]);
3184 hba[i]->busy_initializing = 0;
3188 static void __devexit cciss_remove_one (struct pci_dev *pdev)
3190 ctlr_info_t *tmp_ptr;
3195 if (pci_get_drvdata(pdev) == NULL)
3197 printk( KERN_ERR "cciss: Unable to remove device \n");
3200 tmp_ptr = pci_get_drvdata(pdev);
3204 printk(KERN_ERR "cciss: device appears to "
3205 "already be removed \n");
3208 /* Turn board interrupts off and send the flush cache command */
3209 /* sendcmd will turn off interrupt, and send the flush...
3210 * To write all data in the battery backed cache to disks */
3211 memset(flush_buf, 0, 4);
3212 return_code = sendcmd(CCISS_CACHE_FLUSH, i, flush_buf, 4, 0, 0, 0, NULL,
3214 if(return_code != IO_OK)
3216 printk(KERN_WARNING "Error Flushing cache on controller %d\n",
3219 free_irq(hba[i]->intr, hba[i]);
3220 pci_set_drvdata(pdev, NULL);
3221 iounmap(hba[i]->vaddr);
3222 cciss_unregister_scsi(i); /* unhook from SCSI subsystem */
3223 unregister_blkdev(hba[i]->major, hba[i]->devname);
3224 remove_proc_entry(hba[i]->devname, proc_cciss);
3226 /* remove it from the disk list */
3227 for (j = 0; j < NWD; j++) {
3228 struct gendisk *disk = hba[i]->gendisk[j];
3229 if (disk->flags & GENHD_FL_UP) {
3231 blk_cleanup_queue(disk->queue);
3235 pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof(CommandList_struct),
3236 hba[i]->cmd_pool, hba[i]->cmd_pool_dhandle);
3237 pci_free_consistent(hba[i]->pdev, NR_CMDS * sizeof( ErrorInfo_struct),
3238 hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle);
3239 kfree(hba[i]->cmd_pool_bits);
3240 #ifdef CONFIG_CISS_SCSI_TAPE
3241 kfree(hba[i]->scsi_rejects.complete);
3243 release_io_mem(hba[i]);
3247 static struct pci_driver cciss_pci_driver = {
3249 .probe = cciss_init_one,
3250 .remove = __devexit_p(cciss_remove_one),
3251 .id_table = cciss_pci_device_id, /* id_table */
3255 * This is it. Register the PCI driver information for the cards we control
3256 * the OS will call our registered routines when it finds one of our cards.
3258 static int __init cciss_init(void)
3260 printk(KERN_INFO DRIVER_NAME "\n");
3262 /* Register for our PCI devices */
3263 return pci_module_init(&cciss_pci_driver);
3266 static void __exit cciss_cleanup(void)
3270 pci_unregister_driver(&cciss_pci_driver);
3271 /* double check that all controller entrys have been removed */
3272 for (i=0; i< MAX_CTLR; i++)
3276 printk(KERN_WARNING "cciss: had to remove"
3277 " controller %d\n", i);
3278 cciss_remove_one(hba[i]->pdev);
3281 remove_proc_entry("cciss", proc_root_driver);
3284 static void fail_all_cmds(unsigned long ctlr)
3286 /* If we get here, the board is apparently dead. */
3287 ctlr_info_t *h = hba[ctlr];
3288 CommandList_struct *c;
3289 unsigned long flags;
3291 printk(KERN_WARNING "cciss%d: controller not responding.\n", h->ctlr);
3292 h->alive = 0; /* the controller apparently died... */
3294 spin_lock_irqsave(CCISS_LOCK(ctlr), flags);
3296 pci_disable_device(h->pdev); /* Make sure it is really dead. */
3298 /* move everything off the request queue onto the completed queue */
3299 while( (c = h->reqQ) != NULL ) {
3300 removeQ(&(h->reqQ), c);
3302 addQ (&(h->cmpQ), c);
3305 /* Now, fail everything on the completed queue with a HW error */
3306 while( (c = h->cmpQ) != NULL ) {
3307 removeQ(&h->cmpQ, c);
3308 c->err_info->CommandStatus = CMD_HARDWARE_ERR;
3309 if (c->cmd_type == CMD_RWREQ) {
3310 complete_command(h, c, 0);
3311 } else if (c->cmd_type == CMD_IOCTL_PEND)
3312 complete(c->waiting);
3313 #ifdef CONFIG_CISS_SCSI_TAPE
3314 else if (c->cmd_type == CMD_SCSI)
3315 complete_scsi_command(c, 0, 0);
3318 spin_unlock_irqrestore(CCISS_LOCK(ctlr), flags);
3322 module_init(cciss_init);
3323 module_exit(cciss_cleanup);