drivers/ide/ide-io.c

   1 /*
   2  *      IDE I/O functions
   3  *
   4  *      Basic PIO and command management functionality.
   5  *
   6  * This code was split off from ide.c. See ide.c for history and original
   7  * copyrights.
   8  *
   9  * This program is free software; you can redistribute it and/or modify it
  10  * under the terms of the GNU General Public License as published by the
  11  * Free Software Foundation; either version 2, or (at your option) any
  12  * later version.
  13  *
  14  * This program is distributed in the hope that it will be useful, but
  15  * WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  17  * General Public License for more details.
  18  *
  19  * For the avoidance of doubt the "preferred form" of this code is one which
  20  * is in an open non patent encumbered format. Where cryptographic key signing
  21  * forms part of the process of creating an executable the information
  22  * including keys needed to generate an equivalently functional executable
  23  * are deemed to be part of the source code.
  24  */
  25
  26
  27 #include <linux/module.h>
  28 #include <linux/types.h>
  29 #include <linux/string.h>
  30 #include <linux/kernel.h>
  31 #include <linux/timer.h>
  32 #include <linux/mm.h>
  33 #include <linux/interrupt.h>
  34 #include <linux/major.h>
  35 #include <linux/errno.h>
  36 #include <linux/genhd.h>
  37 #include <linux/blkpg.h>
  38 #include <linux/slab.h>
  39 #include <linux/init.h>
  40 #include <linux/pci.h>
  41 #include <linux/delay.h>
  42 #include <linux/ide.h>
  43 #include <linux/hdreg.h>
  44 #include <linux/completion.h>
  45 #include <linux/reboot.h>
  46 #include <linux/cdrom.h>
  47 #include <linux/seq_file.h>
  48 #include <linux/device.h>
  49 #include <linux/kmod.h>
  50 #include <linux/scatterlist.h>
  51 #include <linux/bitops.h>
  52
  53 #include <asm/byteorder.h>
  54 #include <asm/irq.h>
  55 #include <asm/uaccess.h>
  56 #include <asm/io.h>
  57
  58 static int __ide_end_request(ide_drive_t *drive, struct request *rq,
  59                              int uptodate, unsigned int nr_bytes, int dequeue)
  60 {
  61         int ret = 1;
  62         int error = 0;
  63
  64         if (uptodate <= 0)
  65                 error = uptodate ? uptodate : -EIO;
  66
  67         /*
  68          * if failfast is set on a request, override number of sectors and
  69          * complete the whole request right now
  70          */
  71         if (blk_noretry_request(rq) && error)
  72                 nr_bytes = rq->hard_nr_sectors << 9;
  73
  74         if (!blk_fs_request(rq) && error && !rq->errors)
  75                 rq->errors = -EIO;
  76
  77         /*
  78          * decide whether to reenable DMA -- 3 is a random magic for now,
  79          * if we DMA timeout more than 3 times, just stay in PIO
  80          */
  81         if ((drive->dev_flags & IDE_DFLAG_DMA_PIO_RETRY) &&
  82             drive->retry_pio <= 3) {
  83                 drive->dev_flags &= ~IDE_DFLAG_DMA_PIO_RETRY;
  84                 ide_dma_on(drive);
  85         }
  86
  87         if (!__blk_end_request(rq, error, nr_bytes)) {
  88                 if (dequeue)
  89                         HWGROUP(drive)->rq = NULL;
  90                 ret = 0;
  91         }
  92
  93         return ret;
  94 }
  95
  96 /**
  97  *      ide_end_request         -       complete an IDE I/O
  98  *      @drive: IDE device for the I/O
  99  *      @uptodate:
 100  *      @nr_sectors: number of sectors completed
 101  *
 102  *      This is our end_request wrapper function. We complete the I/O
 103  *      update random number input and dequeue the request, which if
 104  *      it was tagged may be out of order.
 105  */
 106
 107 int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors)
 108 {
 109         unsigned int nr_bytes = nr_sectors << 9;
 110         struct request *rq;
 111         unsigned long flags;
 112         int ret = 1;
 113
 114         /*
 115          * room for locking improvements here, the calls below don't
 116          * need the queue lock held at all
 117          */
 118         spin_lock_irqsave(&ide_lock, flags);
 119         rq = HWGROUP(drive)->rq;
 120
 121         if (!nr_bytes) {
 122                 if (blk_pc_request(rq))
 123                         nr_bytes = rq->data_len;
 124                 else
 125                         nr_bytes = rq->hard_cur_sectors << 9;
 126         }
 127
 128         ret = __ide_end_request(drive, rq, uptodate, nr_bytes, 1);
 129
 130         spin_unlock_irqrestore(&ide_lock, flags);
 131         return ret;
 132 }
 133 EXPORT_SYMBOL(ide_end_request);
 134
 135 static void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
 136 {
 137         struct request_pm_state *pm = rq->data;
 138
 139 #ifdef DEBUG_PM
 140         printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
 141                 drive->name, pm->pm_step);
 142 #endif
 143         if (drive->media != ide_disk)
 144                 return;
 145
 146         switch (pm->pm_step) {
 147         case IDE_PM_FLUSH_CACHE:        /* Suspend step 1 (flush cache) */
 148                 if (pm->pm_state == PM_EVENT_FREEZE)
 149                         pm->pm_step = IDE_PM_COMPLETED;
 150                 else
 151                         pm->pm_step = IDE_PM_STANDBY;
 152                 break;
 153         case IDE_PM_STANDBY:            /* Suspend step 2 (standby) */
 154                 pm->pm_step = IDE_PM_COMPLETED;
 155                 break;
 156         case IDE_PM_RESTORE_PIO:        /* Resume step 1 (restore PIO) */
 157                 pm->pm_step = IDE_PM_IDLE;
 158                 break;
 159         case IDE_PM_IDLE:               /* Resume step 2 (idle)*/
 160                 pm->pm_step = IDE_PM_RESTORE_DMA;
 161                 break;
 162         }
 163 }
 164
 165 static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
 166 {
 167         struct request_pm_state *pm = rq->data;
 168         ide_task_t *args = rq->special;
 169
 170         memset(args, 0, sizeof(*args));
 171
 172         switch (pm->pm_step) {
 173         case IDE_PM_FLUSH_CACHE:        /* Suspend step 1 (flush cache) */
 174                 if (drive->media != ide_disk)
 175                         break;
 176                 /* Not supported? Switch to next step now. */
 177                 if (ata_id_flush_enabled(drive->id) == 0 ||
 178                     (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
 179                         ide_complete_power_step(drive, rq);
 180                         return ide_stopped;
 181                 }
 182                 if (ata_id_flush_ext_enabled(drive->id))
 183                         args->tf.command = ATA_CMD_FLUSH_EXT;
 184                 else
 185                         args->tf.command = ATA_CMD_FLUSH;
 186                 goto out_do_tf;
 187         case IDE_PM_STANDBY:            /* Suspend step 2 (standby) */
 188                 args->tf.command = ATA_CMD_STANDBYNOW1;
 189                 goto out_do_tf;
 190         case IDE_PM_RESTORE_PIO:        /* Resume step 1 (restore PIO) */
 191                 ide_set_max_pio(drive);
 192                 /*
 193                  * skip IDE_PM_IDLE for ATAPI devices
 194                  */
 195                 if (drive->media != ide_disk)
 196                         pm->pm_step = IDE_PM_RESTORE_DMA;
 197                 else
 198                         ide_complete_power_step(drive, rq);
 199                 return ide_stopped;
 200         case IDE_PM_IDLE:               /* Resume step 2 (idle) */
 201                 args->tf.command = ATA_CMD_IDLEIMMEDIATE;
 202                 goto out_do_tf;
 203         case IDE_PM_RESTORE_DMA:        /* Resume step 3 (restore DMA) */
 204                 /*
 205                  * Right now, all we do is call ide_set_dma(drive),
 206                  * we could be smarter and check for current xfer_speed
 207                  * in struct drive etc...
 208                  */
 209                 if (drive->hwif->dma_ops == NULL)
 210                         break;
 211                 /*
 212                  * TODO: respect IDE_DFLAG_USING_DMA
 213                  */
 214                 ide_set_dma(drive);
 215                 break;
 216         }
 217
 218         pm->pm_step = IDE_PM_COMPLETED;
 219         return ide_stopped;
 220
 221 out_do_tf:
 222         args->tf_flags   = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
 223         args->data_phase = TASKFILE_NO_DATA;
 224         return do_rw_taskfile(drive, args);
 225 }
 226
 227 /**
 228  *      ide_end_dequeued_request        -       complete an IDE I/O
 229  *      @drive: IDE device for the I/O
 230  *      @uptodate:
 231  *      @nr_sectors: number of sectors completed
 232  *
 233  *      Complete an I/O that is no longer on the request queue. This
 234  *      typically occurs when we pull the request and issue a REQUEST_SENSE.
 235  *      We must still finish the old request but we must not tamper with the
 236  *      queue in the meantime.
 237  *
 238  *      NOTE: This path does not handle barrier, but barrier is not supported
 239  *      on ide-cd anyway.
 240  */
 241
 242 int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq,
 243                              int uptodate, int nr_sectors)
 244 {
 245         unsigned long flags;
 246         int ret;
 247
 248         spin_lock_irqsave(&ide_lock, flags);
 249         BUG_ON(!blk_rq_started(rq));
 250         ret = __ide_end_request(drive, rq, uptodate, nr_sectors << 9, 0);
 251         spin_unlock_irqrestore(&ide_lock, flags);
 252
 253         return ret;
 254 }
 255 EXPORT_SYMBOL_GPL(ide_end_dequeued_request);
 256
 257
 258 /**
 259  *      ide_complete_pm_request - end the current Power Management request
 260  *      @drive: target drive
 261  *      @rq: request
 262  *
 263  *      This function cleans up the current PM request and stops the queue
 264  *      if necessary.
 265  */
 266 static void ide_complete_pm_request (ide_drive_t *drive, struct request *rq)
 267 {
 268         unsigned long flags;
 269
 270 #ifdef DEBUG_PM
 271         printk("%s: completing PM request, %s\n", drive->name,
 272                blk_pm_suspend_request(rq) ? "suspend" : "resume");
 273 #endif
 274         spin_lock_irqsave(&ide_lock, flags);
 275         if (blk_pm_suspend_request(rq)) {
 276                 blk_stop_queue(drive->queue);
 277         } else {
 278                 drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
 279                 blk_start_queue(drive->queue);
 280         }
 281         HWGROUP(drive)->rq = NULL;
 282         if (__blk_end_request(rq, 0, 0))
 283                 BUG();
 284         spin_unlock_irqrestore(&ide_lock, flags);
 285 }
 286
 287 /**
 288  *      ide_end_drive_cmd       -       end an explicit drive command
 289  *      @drive: command
 290  *      @stat: status bits
 291  *      @err: error bits
 292  *
 293  *      Clean up after success/failure of an explicit drive command.
 294  *      These get thrown onto the queue so they are synchronized with
 295  *      real I/O operations on the drive.
 296  *
 297  *      In LBA48 mode we have to read the register set twice to get
 298  *      all the extra information out.
 299  */
 300
 301 void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
 302 {
 303         unsigned long flags;
 304         struct request *rq;
 305
 306         spin_lock_irqsave(&ide_lock, flags);
 307         rq = HWGROUP(drive)->rq;
 308         spin_unlock_irqrestore(&ide_lock, flags);
 309
 310         if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
 311                 ide_task_t *task = (ide_task_t *)rq->special;
 312
 313                 if (rq->errors == 0)
 314                         rq->errors = !OK_STAT(stat, ATA_DRDY, BAD_STAT);
 315
 316                 if (task) {
 317                         struct ide_taskfile *tf = &task->tf;
 318
 319                         tf->error = err;
 320                         tf->status = stat;
 321
 322                         drive->hwif->tp_ops->tf_read(drive, task);
 323
 324                         if (task->tf_flags & IDE_TFLAG_DYN)
 325                                 kfree(task);
 326                 }
 327         } else if (blk_pm_request(rq)) {
 328                 struct request_pm_state *pm = rq->data;
 329
 330                 ide_complete_power_step(drive, rq);
 331                 if (pm->pm_step == IDE_PM_COMPLETED)
 332                         ide_complete_pm_request(drive, rq);
 333                 return;
 334         }
 335
 336         spin_lock_irqsave(&ide_lock, flags);
 337         HWGROUP(drive)->rq = NULL;
 338         rq->errors = err;
 339         if (unlikely(__blk_end_request(rq, (rq->errors ? -EIO : 0),
 340                                        blk_rq_bytes(rq))))
 341                 BUG();
 342         spin_unlock_irqrestore(&ide_lock, flags);
 343 }
 344
 345 EXPORT_SYMBOL(ide_end_drive_cmd);
 346
 347 static void ide_kill_rq(ide_drive_t *drive, struct request *rq)
 348 {
 349         if (rq->rq_disk) {
 350                 ide_driver_t *drv;
 351
 352                 drv = *(ide_driver_t **)rq->rq_disk->private_data;
 353                 drv->end_request(drive, 0, 0);
 354         } else
 355                 ide_end_request(drive, 0, 0);
 356 }
 357
 358 static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
 359 {
 360         ide_hwif_t *hwif = drive->hwif;
 361
 362         if ((stat & ATA_BUSY) ||
 363             ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) {
 364                 /* other bits are useless when BUSY */
 365                 rq->errors |= ERROR_RESET;
 366         } else if (stat & ATA_ERR) {
 367                 /* err has different meaning on cdrom and tape */
 368                 if (err == ATA_ABORTED) {
 369                         if ((drive->dev_flags & IDE_DFLAG_LBA) &&
 370                             /* some newer drives don't support ATA_CMD_INIT_DEV_PARAMS */
 371                             hwif->tp_ops->read_status(hwif) == ATA_CMD_INIT_DEV_PARAMS)
 372                                 return ide_stopped;
 373                 } else if ((err & BAD_CRC) == BAD_CRC) {
 374                         /* UDMA crc error, just retry the operation */
 375                         drive->crc_count++;
 376                 } else if (err & (ATA_BBK | ATA_UNC)) {
 377                         /* retries won't help these */
 378                         rq->errors = ERROR_MAX;
 379                 } else if (err & ATA_TRK0NF) {
 380                         /* help it find track zero */
 381                         rq->errors |= ERROR_RECAL;
 382                 }
 383         }
 384
 385         if ((stat & ATA_DRQ) && rq_data_dir(rq) == READ &&
 386             (hwif->host_flags & IDE_HFLAG_ERROR_STOPS_FIFO) == 0) {
 387                 int nsect = drive->mult_count ? drive->mult_count : 1;
 388
 389                 ide_pad_transfer(drive, READ, nsect * SECTOR_SIZE);
 390         }
 391
 392         if (rq->errors >= ERROR_MAX || blk_noretry_request(rq)) {
 393                 ide_kill_rq(drive, rq);
 394                 return ide_stopped;
 395         }
 396
 397         if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ))
 398                 rq->errors |= ERROR_RESET;
 399
 400         if ((rq->errors & ERROR_RESET) == ERROR_RESET) {
 401                 ++rq->errors;
 402                 return ide_do_reset(drive);
 403         }
 404
 405         if ((rq->errors & ERROR_RECAL) == ERROR_RECAL)
 406                 drive->special.b.recalibrate = 1;
 407
 408         ++rq->errors;
 409
 410         return ide_stopped;
 411 }
 412
 413 static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
 414 {
 415         ide_hwif_t *hwif = drive->hwif;
 416
 417         if ((stat & ATA_BUSY) ||
 418             ((stat & ATA_DF) && (drive->dev_flags & IDE_DFLAG_NOWERR) == 0)) {
 419                 /* other bits are useless when BUSY */
 420                 rq->errors |= ERROR_RESET;
 421         } else {
 422                 /* add decoding error stuff */
 423         }
 424
 425         if (hwif->tp_ops->read_status(hwif) & (ATA_BUSY | ATA_DRQ))
 426                 /* force an abort */
 427                 hwif->tp_ops->exec_command(hwif, ATA_CMD_IDLEIMMEDIATE);
 428
 429         if (rq->errors >= ERROR_MAX) {
 430                 ide_kill_rq(drive, rq);
 431         } else {
 432                 if ((rq->errors & ERROR_RESET) == ERROR_RESET) {
 433                         ++rq->errors;
 434                         return ide_do_reset(drive);
 435                 }
 436                 ++rq->errors;
 437         }
 438
 439         return ide_stopped;
 440 }
 441
 442 ide_startstop_t
 443 __ide_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err)
 444 {
 445         if (drive->media == ide_disk)
 446                 return ide_ata_error(drive, rq, stat, err);
 447         return ide_atapi_error(drive, rq, stat, err);
 448 }
 449
 450 EXPORT_SYMBOL_GPL(__ide_error);
 451
 452 /**
 453  *      ide_error       -       handle an error on the IDE
 454  *      @drive: drive the error occurred on
 455  *      @msg: message to report
 456  *      @stat: status bits
 457  *
 458  *      ide_error() takes action based on the error returned by the drive.
 459  *      For normal I/O that may well include retries. We deal with
 460  *      both new-style (taskfile) and old style command handling here.
 461  *      In the case of taskfile command handling there is work left to
 462  *      do
 463  */
 464
 465 ide_startstop_t ide_error (ide_drive_t *drive, const char *msg, u8 stat)
 466 {
 467         struct request *rq;
 468         u8 err;
 469
 470         err = ide_dump_status(drive, msg, stat);
 471
 472         if ((rq = HWGROUP(drive)->rq) == NULL)
 473                 return ide_stopped;
 474
 475         /* retry only "normal" I/O: */
 476         if (!blk_fs_request(rq)) {
 477                 rq->errors = 1;
 478                 ide_end_drive_cmd(drive, stat, err);
 479                 return ide_stopped;
 480         }
 481
 482         if (rq->rq_disk) {
 483                 ide_driver_t *drv;
 484
 485                 drv = *(ide_driver_t **)rq->rq_disk->private_data;
 486                 return drv->error(drive, rq, stat, err);
 487         } else
 488                 return __ide_error(drive, rq, stat, err);
 489 }
 490
 491 EXPORT_SYMBOL_GPL(ide_error);
 492
 493 static void ide_tf_set_specify_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
 494 {
 495         tf->nsect   = drive->sect;
 496         tf->lbal    = drive->sect;
 497         tf->lbam    = drive->cyl;
 498         tf->lbah    = drive->cyl >> 8;
 499         tf->device  = (drive->head - 1) | drive->select;
 500         tf->command = ATA_CMD_INIT_DEV_PARAMS;
 501 }
 502
 503 static void ide_tf_set_restore_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
 504 {
 505         tf->nsect   = drive->sect;
 506         tf->command = ATA_CMD_RESTORE;
 507 }
 508
 509 static void ide_tf_set_setmult_cmd(ide_drive_t *drive, struct ide_taskfile *tf)
 510 {
 511         tf->nsect   = drive->mult_req;
 512         tf->command = ATA_CMD_SET_MULTI;
 513 }
 514
 515 static ide_startstop_t ide_disk_special(ide_drive_t *drive)
 516 {
 517         special_t *s = &drive->special;
 518         ide_task_t args;
 519
 520         memset(&args, 0, sizeof(ide_task_t));
 521         args.data_phase = TASKFILE_NO_DATA;
 522
 523         if (s->b.set_geometry) {
 524                 s->b.set_geometry = 0;
 525                 ide_tf_set_specify_cmd(drive, &args.tf);
 526         } else if (s->b.recalibrate) {
 527                 s->b.recalibrate = 0;
 528                 ide_tf_set_restore_cmd(drive, &args.tf);
 529         } else if (s->b.set_multmode) {
 530                 s->b.set_multmode = 0;
 531                 ide_tf_set_setmult_cmd(drive, &args.tf);
 532         } else if (s->all) {
 533                 int special = s->all;
 534                 s->all = 0;
 535                 printk(KERN_ERR "%s: bad special flag: 0x%02x\n", drive->name, special);
 536                 return ide_stopped;
 537         }
 538
 539         args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE |
 540                         IDE_TFLAG_CUSTOM_HANDLER;
 541
 542         do_rw_taskfile(drive, &args);
 543
 544         return ide_started;
 545 }
 546
 547 /**
 548  *      do_special              -       issue some special commands
 549  *      @drive: drive the command is for
 550  *
 551  *      do_special() is used to issue ATA_CMD_INIT_DEV_PARAMS,
 552  *      ATA_CMD_RESTORE and ATA_CMD_SET_MULTI commands to a drive.
 553  *
 554  *      It used to do much more, but has been scaled back.
 555  */
 556
 557 static ide_startstop_t do_special (ide_drive_t *drive)
 558 {
 559         special_t *s = &drive->special;
 560
 561 #ifdef DEBUG
 562         printk("%s: do_special: 0x%02x\n", drive->name, s->all);
 563 #endif
 564         if (drive->media == ide_disk)
 565                 return ide_disk_special(drive);
 566
 567         s->all = 0;
 568         drive->mult_req = 0;
 569         return ide_stopped;
 570 }
 571
 572 void ide_map_sg(ide_drive_t *drive, struct request *rq)
 573 {
 574         ide_hwif_t *hwif = drive->hwif;
 575         struct scatterlist *sg = hwif->sg_table;
 576
 577         if (hwif->sg_mapped)    /* needed by ide-scsi */
 578                 return;
 579
 580         if (rq->cmd_type != REQ_TYPE_ATA_TASKFILE) {
 581                 hwif->sg_nents = blk_rq_map_sg(drive->queue, rq, sg);
 582         } else {
 583                 sg_init_one(sg, rq->buffer, rq->nr_sectors * SECTOR_SIZE);
 584                 hwif->sg_nents = 1;
 585         }
 586 }
 587
 588 EXPORT_SYMBOL_GPL(ide_map_sg);
 589
 590 void ide_init_sg_cmd(ide_drive_t *drive, struct request *rq)
 591 {
 592         ide_hwif_t *hwif = drive->hwif;
 593
 594         hwif->nsect = hwif->nleft = rq->nr_sectors;
 595         hwif->cursg_ofs = 0;
 596         hwif->cursg = NULL;
 597 }
 598
 599 EXPORT_SYMBOL_GPL(ide_init_sg_cmd);
 600
 601 /**
 602  *      execute_drive_command   -       issue special drive command
 603  *      @drive: the drive to issue the command on
 604  *      @rq: the request structure holding the command
 605  *
 606  *      execute_drive_cmd() issues a special drive command,  usually
 607  *      initiated by ioctl() from the external hdparm program. The
 608  *      command can be a drive command, drive task or taskfile
 609  *      operation. Weirdly you can call it with NULL to wait for
 610  *      all commands to finish. Don't do this as that is due to change
 611  */
 612
 613 static ide_startstop_t execute_drive_cmd (ide_drive_t *drive,
 614                 struct request *rq)
 615 {
 616         ide_hwif_t *hwif = HWIF(drive);
 617         ide_task_t *task = rq->special;
 618
 619         if (task) {
 620                 hwif->data_phase = task->data_phase;
 621
 622                 switch (hwif->data_phase) {
 623                 case TASKFILE_MULTI_OUT:
 624                 case TASKFILE_OUT:
 625                 case TASKFILE_MULTI_IN:
 626                 case TASKFILE_IN:
 627                         ide_init_sg_cmd(drive, rq);
 628                         ide_map_sg(drive, rq);
 629                 default:
 630                         break;
 631                 }
 632
 633                 return do_rw_taskfile(drive, task);
 634         }
 635
 636         /*
 637          * NULL is actually a valid way of waiting for
 638          * all current requests to be flushed from the queue.
 639          */
 640 #ifdef DEBUG
 641         printk("%s: DRIVE_CMD (null)\n", drive->name);
 642 #endif
 643         ide_end_drive_cmd(drive, hwif->tp_ops->read_status(hwif),
 644                           ide_read_error(drive));
 645
 646         return ide_stopped;
 647 }
 648
 649 int ide_devset_execute(ide_drive_t *drive, const struct ide_devset *setting,
 650                        int arg)
 651 {
 652         struct request_queue *q = drive->queue;
 653         struct request *rq;
 654         int ret = 0;
 655
 656         if (!(setting->flags & DS_SYNC))
 657                 return setting->set(drive, arg);
 658
 659         rq = blk_get_request(q, READ, __GFP_WAIT);
 660         rq->cmd_type = REQ_TYPE_SPECIAL;
 661         rq->cmd_len = 5;
 662         rq->cmd[0] = REQ_DEVSET_EXEC;
 663         *(int *)&rq->cmd[1] = arg;
 664         rq->special = setting->set;
 665
 666         if (blk_execute_rq(q, NULL, rq, 0))
 667                 ret = rq->errors;
 668         blk_put_request(rq);
 669
 670         return ret;
 671 }
 672 EXPORT_SYMBOL_GPL(ide_devset_execute);
 673
 674 static ide_startstop_t ide_special_rq(ide_drive_t *drive, struct request *rq)
 675 {
 676         u8 cmd = rq->cmd[0];
 677
 678         if (cmd == REQ_PARK_HEADS || cmd == REQ_UNPARK_HEADS) {
 679                 ide_task_t task;
 680                 struct ide_taskfile *tf = &task.tf;
 681
 682                 memset(&task, 0, sizeof(task));
 683                 if (cmd == REQ_PARK_HEADS) {
 684                         drive->sleep = *(unsigned long *)rq->special;
 685                         drive->dev_flags |= IDE_DFLAG_SLEEPING;
 686                         tf->command = ATA_CMD_IDLEIMMEDIATE;
 687                         tf->feature = 0x44;
 688                         tf->lbal = 0x4c;
 689                         tf->lbam = 0x4e;
 690                         tf->lbah = 0x55;
 691                         task.tf_flags |= IDE_TFLAG_CUSTOM_HANDLER;
 692                 } else          /* cmd == REQ_UNPARK_HEADS */
 693                         tf->command = ATA_CMD_CHK_POWER;
 694
 695                 task.tf_flags |= IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
 696                 task.rq = rq;
 697                 drive->hwif->data_phase = task.data_phase = TASKFILE_NO_DATA;
 698                 return do_rw_taskfile(drive, &task);
 699         }
 700
 701         switch (cmd) {
 702         case REQ_DEVSET_EXEC:
 703         {
 704                 int err, (*setfunc)(ide_drive_t *, int) = rq->special;
 705
 706                 err = setfunc(drive, *(int *)&rq->cmd[1]);
 707                 if (err)
 708                         rq->errors = err;
 709                 else
 710                         err = 1;
 711                 ide_end_request(drive, err, 0);
 712                 return ide_stopped;
 713         }
 714         case REQ_DRIVE_RESET:
 715                 return ide_do_reset(drive);
 716         default:
 717                 blk_dump_rq_flags(rq, "ide_special_rq - bad request");
 718                 ide_end_request(drive, 0, 0);
 719                 return ide_stopped;
 720         }
 721 }
 722
 723 static void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
 724 {
 725         struct request_pm_state *pm = rq->data;
 726
 727         if (blk_pm_suspend_request(rq) &&
 728             pm->pm_step == IDE_PM_START_SUSPEND)
 729                 /* Mark drive blocked when starting the suspend sequence. */
 730                 drive->dev_flags |= IDE_DFLAG_BLOCKED;
 731         else if (blk_pm_resume_request(rq) &&
 732                  pm->pm_step == IDE_PM_START_RESUME) {
 733                 /*
 734                  * The first thing we do on wakeup is to wait for BSY bit to
 735                  * go away (with a looong timeout) as a drive on this hwif may
 736                  * just be POSTing itself.
 737                  * We do that before even selecting as the "other" device on
 738                  * the bus may be broken enough to walk on our toes at this
 739                  * point.
 740                  */
 741                 ide_hwif_t *hwif = drive->hwif;
 742                 int rc;
 743 #ifdef DEBUG_PM
 744                 printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
 745 #endif
 746                 rc = ide_wait_not_busy(hwif, 35000);
 747                 if (rc)
 748                         printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
 749                 SELECT_DRIVE(drive);
 750                 hwif->tp_ops->set_irq(hwif, 1);
 751                 rc = ide_wait_not_busy(hwif, 100000);
 752                 if (rc)
 753                         printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
 754         }
 755 }
 756
 757 /**
 758  *      start_request   -       start of I/O and command issuing for IDE
 759  *
 760  *      start_request() initiates handling of a new I/O request. It
 761  *      accepts commands and I/O (read/write) requests.
 762  *
 763  *      FIXME: this function needs a rename
 764  */
 765
 766 static ide_startstop_t start_request (ide_drive_t *drive, struct request *rq)
 767 {
 768         ide_startstop_t startstop;
 769
 770         BUG_ON(!blk_rq_started(rq));
 771
 772 #ifdef DEBUG
 773         printk("%s: start_request: current=0x%08lx\n",
 774                 HWIF(drive)->name, (unsigned long) rq);
 775 #endif
 776
 777         /* bail early if we've exceeded max_failures */
 778         if (drive->max_failures && (drive->failures > drive->max_failures)) {
 779                 rq->cmd_flags |= REQ_FAILED;
 780                 goto kill_rq;
 781         }
 782
 783         if (blk_pm_request(rq))
 784                 ide_check_pm_state(drive, rq);
 785
 786         SELECT_DRIVE(drive);
 787         if (ide_wait_stat(&startstop, drive, drive->ready_stat,
 788                           ATA_BUSY | ATA_DRQ, WAIT_READY)) {
 789                 printk(KERN_ERR "%s: drive not ready for command\n", drive->name);
 790                 return startstop;
 791         }
 792         if (!drive->special.all) {
 793                 ide_driver_t *drv;
 794
 795                 /*
 796                  * We reset the drive so we need to issue a SETFEATURES.
 797                  * Do it _after_ do_special() restored device parameters.
 798                  */
 799                 if (drive->current_speed == 0xff)
 800                         ide_config_drive_speed(drive, drive->desired_speed);
 801
 802                 if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
 803                         return execute_drive_cmd(drive, rq);
 804                 else if (blk_pm_request(rq)) {
 805                         struct request_pm_state *pm = rq->data;
 806 #ifdef DEBUG_PM
 807                         printk("%s: start_power_step(step: %d)\n",
 808                                 drive->name, pm->pm_step);
 809 #endif
 810                         startstop = ide_start_power_step(drive, rq);
 811                         if (startstop == ide_stopped &&
 812                             pm->pm_step == IDE_PM_COMPLETED)
 813                                 ide_complete_pm_request(drive, rq);
 814                         return startstop;
 815                 } else if (!rq->rq_disk && blk_special_request(rq))
 816                         /*
 817                          * TODO: Once all ULDs have been modified to
 818                          * check for specific op codes rather than
 819                          * blindly accepting any special request, the
 820                          * check for ->rq_disk above may be replaced
 821                          * by a more suitable mechanism or even
 822                          * dropped entirely.
 823                          */
 824                         return ide_special_rq(drive, rq);
 825
 826                 drv = *(ide_driver_t **)rq->rq_disk->private_data;
 827
 828                 return drv->do_request(drive, rq, rq->sector);
 829         }
 830         return do_special(drive);
 831 kill_rq:
 832         ide_kill_rq(drive, rq);
 833         return ide_stopped;
 834 }
 835
 836 /**
 837  *      ide_stall_queue         -       pause an IDE device
 838  *      @drive: drive to stall
 839  *      @timeout: time to stall for (jiffies)
 840  *
 841  *      ide_stall_queue() can be used by a drive to give excess bandwidth back
 842  *      to the hwgroup by sleeping for timeout jiffies.
 843  */
 844
 845 void ide_stall_queue (ide_drive_t *drive, unsigned long timeout)
 846 {
 847         if (timeout > WAIT_WORSTCASE)
 848                 timeout = WAIT_WORSTCASE;
 849         drive->sleep = timeout + jiffies;
 850         drive->dev_flags |= IDE_DFLAG_SLEEPING;
 851 }
 852
 853 EXPORT_SYMBOL(ide_stall_queue);
 854
 855 #define WAKEUP(drive)   ((drive)->service_start + 2 * (drive)->service_time)
 856
 857 /**
 858  *      choose_drive            -       select a drive to service
 859  *      @hwgroup: hardware group to select on
 860  *
 861  *      choose_drive() selects the next drive which will be serviced.
 862  *      This is necessary because the IDE layer can't issue commands
 863  *      to both drives on the same cable, unlike SCSI.
 864  */
 865
 866 static inline ide_drive_t *choose_drive (ide_hwgroup_t *hwgroup)
 867 {
 868         ide_drive_t *drive, *best;
 869
 870 repeat:
 871         best = NULL;
 872         drive = hwgroup->drive;
 873
 874         /*
 875          * drive is doing pre-flush, ordered write, post-flush sequence. even
 876          * though that is 3 requests, it must be seen as a single transaction.
 877          * we must not preempt this drive until that is complete
 878          */
 879         if (blk_queue_flushing(drive->queue)) {
 880                 /*
 881                  * small race where queue could get replugged during
 882                  * the 3-request flush cycle, just yank the plug since
 883                  * we want it to finish asap
 884                  */
 885                 blk_remove_plug(drive->queue);
 886                 return drive;
 887         }
 888
 889         do {
 890                 u8 dev_s = !!(drive->dev_flags & IDE_DFLAG_SLEEPING);
 891                 u8 best_s = (best && !!(best->dev_flags & IDE_DFLAG_SLEEPING));
 892
 893                 if ((dev_s == 0 || time_after_eq(jiffies, drive->sleep)) &&
 894                     !elv_queue_empty(drive->queue)) {
 895                         if (best == NULL ||
 896                             (dev_s && (best_s == 0 || time_before(drive->sleep, best->sleep))) ||
 897                             (best_s == 0 && time_before(WAKEUP(drive), WAKEUP(best)))) {
 898                                 if (!blk_queue_plugged(drive->queue))
 899                                         best = drive;
 900                         }
 901                 }
 902         } while ((drive = drive->next) != hwgroup->drive);
 903
 904         if (best && (best->dev_flags & IDE_DFLAG_NICE1) &&
 905             (best->dev_flags & IDE_DFLAG_SLEEPING) == 0 &&
 906             best != hwgroup->drive && best->service_time > WAIT_MIN_SLEEP) {
 907                 long t = (signed long)(WAKEUP(best) - jiffies);
 908                 if (t >= WAIT_MIN_SLEEP) {
 909                 /*
 910                  * We *may* have some time to spare, but first let's see if
 911                  * someone can potentially benefit from our nice mood today..
 912                  */
 913                         drive = best->next;
 914                         do {
 915                                 if ((drive->dev_flags & IDE_DFLAG_SLEEPING) == 0
 916                                  && time_before(jiffies - best->service_time, WAKEUP(drive))
 917                                  && time_before(WAKEUP(drive), jiffies + t))
 918                                 {
 919                                         ide_stall_queue(best, min_t(long, t, 10 * WAIT_MIN_SLEEP));
 920                                         goto repeat;
 921                                 }
 922                         } while ((drive = drive->next) != best);
 923                 }
 924         }
 925         return best;
 926 }
 927
 928 /*
 929  * Issue a new request to a drive from hwgroup
 930  * Caller must have already done spin_lock_irqsave(&ide_lock, ..);
 931  *
 932  * A hwgroup is a serialized group of IDE interfaces.  Usually there is
 933  * exactly one hwif (interface) per hwgroup, but buggy controllers (eg. CMD640)
 934  * may have both interfaces in a single hwgroup to "serialize" access.
 935  * Or possibly multiple ISA interfaces can share a common IRQ by being grouped
 936  * together into one hwgroup for serialized access.
 937  *
 938  * Note also that several hwgroups can end up sharing a single IRQ,
 939  * possibly along with many other devices.  This is especially common in
 940  * PCI-based systems with off-board IDE controller cards.
 941  *
 942  * The IDE driver uses the single global ide_lock spinlock to protect
 943  * access to the request queues, and to protect the hwgroup->busy flag.
 944  *
 945  * The first thread into the driver for a particular hwgroup sets the
 946  * hwgroup->busy flag to indicate that this hwgroup is now active,
 947  * and then initiates processing of the top request from the request queue.
 948  *
 949  * Other threads attempting entry notice the busy setting, and will simply
 950  * queue their new requests and exit immediately.  Note that hwgroup->busy
 951  * remains set even when the driver is merely awaiting the next interrupt.
 952  * Thus, the meaning is "this hwgroup is busy processing a request".
 953  *
 954  * When processing of a request completes, the completing thread or IRQ-handler
 955  * will start the next request from the queue.  If no more work remains,
 956  * the driver will clear the hwgroup->busy flag and exit.
 957  *
 958  * The ide_lock (spinlock) is used to protect all access to the
 959  * hwgroup->busy flag, but is otherwise not needed for most processing in
 960  * the driver.  This makes the driver much more friendlier to shared IRQs
 961  * than previous designs, while remaining 100% (?) SMP safe and capable.
 962  */
 963 static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
 964 {
 965         ide_drive_t     *drive;
 966         ide_hwif_t      *hwif;
 967         struct request  *rq;
 968         ide_startstop_t startstop;
 969         int             loops = 0;
 970
 971         /* caller must own ide_lock */
 972         BUG_ON(!irqs_disabled());
 973
 974         while (!hwgroup->busy) {
 975                 hwgroup->busy = 1;
 976                 /* for atari only */
 977                 ide_get_lock(ide_intr, hwgroup);
 978                 drive = choose_drive(hwgroup);
 979                 if (drive == NULL) {
 980                         int sleeping = 0;
 981                         unsigned long sleep = 0; /* shut up, gcc */
 982                         hwgroup->rq = NULL;
 983                         drive = hwgroup->drive;
 984                         do {
 985                                 if ((drive->dev_flags & IDE_DFLAG_SLEEPING) &&
 986                                     (sleeping == 0 ||
 987                                      time_before(drive->sleep, sleep))) {
 988                                         sleeping = 1;
 989                                         sleep = drive->sleep;
 990                                 }
 991                         } while ((drive = drive->next) != hwgroup->drive);
 992                         if (sleeping) {
 993                 /*
 994                  * Take a short snooze, and then wake up this hwgroup again.
 995                  * This gives other hwgroups on the same a chance to
 996                  * play fairly with us, just in case there are big differences
 997                  * in relative throughputs.. don't want to hog the cpu too much.
 998                  */
 999                                 if (time_before(sleep, jiffies + WAIT_MIN_SLEEP))
1000                                         sleep = jiffies + WAIT_MIN_SLEEP;
1001 #if 1
1002                                 if (timer_pending(&hwgroup->timer))
1003                                         printk(KERN_CRIT "ide_set_handler: timer already active\n");
1004 #endif
1005                                 /* so that ide_timer_expiry knows what to do */
1006                                 hwgroup->sleeping = 1;
1007                                 hwgroup->req_gen_timer = hwgroup->req_gen;
1008                                 mod_timer(&hwgroup->timer, sleep);
1009                                 /* we purposely leave hwgroup->busy==1
1010                                  * while sleeping */
1011                         } else {
1012                                 /* Ugly, but how can we sleep for the lock
1013                                  * otherwise? perhaps from tq_disk?
1014                                  */
1015
1016                                 /* for atari only */
1017                                 ide_release_lock();
1018                                 hwgroup->busy = 0;
1019                         }
1020
1021                         /* no more work for this hwgroup (for now) */
1022                         return;
1023                 }
1024         again:
1025                 hwif = HWIF(drive);
1026                 if (hwgroup->hwif->sharing_irq && hwif != hwgroup->hwif) {
1027                         /*
1028                          * set nIEN for previous hwif, drives in the
1029                          * quirk_list may not like intr setups/cleanups
1030                          */
1031                         if (drive->quirk_list != 1)
1032                                 hwif->tp_ops->set_irq(hwif, 0);
1033                 }
1034                 hwgroup->hwif = hwif;
1035                 hwgroup->drive = drive;
1036                 drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED);
1037                 drive->service_start = jiffies;
1038
1039                 if (blk_queue_plugged(drive->queue)) {
1040                         printk(KERN_ERR "ide: huh? queue was plugged!\n");
1041                         break;
1042                 }
1043
1044                 /*
1045                  * we know that the queue isn't empty, but this can happen
1046                  * if the q->prep_rq_fn() decides to kill a request
1047                  */
1048                 rq = elv_next_request(drive->queue);
1049                 if (!rq) {
1050                         hwgroup->busy = 0;
1051                         break;
1052                 }
1053
1054                 /*
1055                  * Sanity: don't accept a request that isn't a PM request
1056                  * if we are currently power managed. This is very important as
1057                  * blk_stop_queue() doesn't prevent the elv_next_request()
1058                  * above to return us whatever is in the queue. Since we call
1059                  * ide_do_request() ourselves, we end up taking requests while
1060                  * the queue is blocked...
1061                  *
1062                  * We let requests forced at head of queue with ide-preempt
1063                  * though. I hope that doesn't happen too much, hopefully not
1064                  * unless the subdriver triggers such a thing in its own PM
1065                  * state machine.
1066                  *
1067                  * We count how many times we loop here to make sure we service
1068                  * all drives in the hwgroup without looping for ever
1069                  */
1070                 if ((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
1071                     blk_pm_request(rq) == 0 &&
1072                     (rq->cmd_flags & REQ_PREEMPT) == 0) {
1073                         drive = drive->next ? drive->next : hwgroup->drive;
1074                         if (loops++ < 4 && !blk_queue_plugged(drive->queue))
1075                                 goto again;
1076                         /* We clear busy, there should be no pending ATA command at this point. */
1077                         hwgroup->busy = 0;
1078                         break;
1079                 }
1080
1081                 hwgroup->rq = rq;
1082
1083                 /*
1084                  * Some systems have trouble with IDE IRQs arriving while
1085                  * the driver is still setting things up.  So, here we disable
1086                  * the IRQ used by this interface while the request is being started.
1087                  * This may look bad at first, but pretty much the same thing
1088                  * happens anyway when any interrupt comes in, IDE or otherwise
1089                  *  -- the kernel masks the IRQ while it is being handled.
1090                  */
1091                 if (masked_irq != IDE_NO_IRQ && hwif->irq != masked_irq)
1092                         disable_irq_nosync(hwif->irq);
1093                 spin_unlock(&ide_lock);
1094                 local_irq_enable_in_hardirq();
1095                         /* allow other IRQs while we start this request */
1096                 startstop = start_request(drive, rq);
1097                 spin_lock_irq(&ide_lock);
1098                 if (masked_irq != IDE_NO_IRQ && hwif->irq != masked_irq)
1099                         enable_irq(hwif->irq);
1100                 if (startstop == ide_stopped)
1101                         hwgroup->busy = 0;
1102         }
1103 }
1104
1105 /*
1106  * Passes the stuff to ide_do_request
1107  */
1108 void do_ide_request(struct request_queue *q)
1109 {
1110         ide_drive_t *drive = q->queuedata;
1111
1112         ide_do_request(HWGROUP(drive), IDE_NO_IRQ);
1113 }
1114
1115 /*
1116  * un-busy the hwgroup etc, and clear any pending DMA status. we want to
1117  * retry the current request in pio mode instead of risking tossing it
1118  * all away
1119  */
1120 static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error)
1121 {
1122         ide_hwif_t *hwif = HWIF(drive);
1123         struct request *rq;
1124         ide_startstop_t ret = ide_stopped;
1125
1126         /*
1127          * end current dma transaction
1128          */
1129
1130         if (error < 0) {
1131                 printk(KERN_WARNING "%s: DMA timeout error\n", drive->name);
1132                 (void)hwif->dma_ops->dma_end(drive);
1133                 ret = ide_error(drive, "dma timeout error",
1134                                 hwif->tp_ops->read_status(hwif));
1135         } else {
1136                 printk(KERN_WARNING "%s: DMA timeout retry\n", drive->name);
1137                 hwif->dma_ops->dma_timeout(drive);
1138         }
1139
1140         /*
1141          * disable dma for now, but remember that we did so because of
1142          * a timeout -- we'll reenable after we finish this next request
1143          * (or rather the first chunk of it) in pio.
1144          */
1145         drive->dev_flags |= IDE_DFLAG_DMA_PIO_RETRY;
1146         drive->retry_pio++;
1147         ide_dma_off_quietly(drive);
1148
1149         /*
1150          * un-busy drive etc (hwgroup->busy is cleared on return) and
1151          * make sure request is sane
1152          */
1153         rq = HWGROUP(drive)->rq;
1154
1155         if (!rq)
1156                 goto out;
1157
1158         HWGROUP(drive)->rq = NULL;
1159
1160         rq->errors = 0;
1161
1162         if (!rq->bio)
1163                 goto out;
1164
1165         rq->sector = rq->bio->bi_sector;
1166         rq->current_nr_sectors = bio_iovec(rq->bio)->bv_len >> 9;
1167         rq->hard_cur_sectors = rq->current_nr_sectors;
1168         rq->buffer = bio_data(rq->bio);
1169 out:
1170         return ret;
1171 }
1172
1173 /**
1174  *      ide_timer_expiry        -       handle lack of an IDE interrupt
1175  *      @data: timer callback magic (hwgroup)
1176  *
1177  *      An IDE command has timed out before the expected drive return
1178  *      occurred. At this point we attempt to clean up the current
1179  *      mess. If the current handler includes an expiry handler then
1180  *      we invoke the expiry handler, and providing it is happy the
1181  *      work is done. If that fails we apply generic recovery rules
1182  *      invoking the handler and checking the drive DMA status. We
1183  *      have an excessively incestuous relationship with the DMA
1184  *      logic that wants cleaning up.
1185  */
1186
1187 void ide_timer_expiry (unsigned long data)
1188 {
1189         ide_hwgroup_t   *hwgroup = (ide_hwgroup_t *) data;
1190         ide_handler_t   *handler;
1191         ide_expiry_t    *expiry;
1192         unsigned long   flags;
1193         unsigned long   wait = -1;
1194
1195         spin_lock_irqsave(&ide_lock, flags);
1196
1197         if (((handler = hwgroup->handler) == NULL) ||
1198             (hwgroup->req_gen != hwgroup->req_gen_timer)) {
1199                 /*
1200                  * Either a marginal timeout occurred
1201                  * (got the interrupt just as timer expired),
1202                  * or we were "sleeping" to give other devices a chance.
1203                  * Either way, we don't really want to complain about anything.
1204                  */
1205                 if (hwgroup->sleeping) {
1206                         hwgroup->sleeping = 0;
1207                         hwgroup->busy = 0;
1208                 }
1209         } else {
1210                 ide_drive_t *drive = hwgroup->drive;
1211                 if (!drive) {
1212                         printk(KERN_ERR "ide_timer_expiry: hwgroup->drive was NULL\n");
1213                         hwgroup->handler = NULL;
1214                 } else {
1215                         ide_hwif_t *hwif;
1216                         ide_startstop_t startstop = ide_stopped;
1217                         if (!hwgroup->busy) {
1218                                 hwgroup->busy = 1;      /* paranoia */
1219                                 printk(KERN_ERR "%s: ide_timer_expiry: hwgroup->busy was 0 ??\n", drive->name);
1220                         }
1221                         if ((expiry = hwgroup->expiry) != NULL) {
1222                                 /* continue */
1223                                 if ((wait = expiry(drive)) > 0) {
1224                                         /* reset timer */
1225                                         hwgroup->timer.expires  = jiffies + wait;
1226                                         hwgroup->req_gen_timer = hwgroup->req_gen;
1227                                         add_timer(&hwgroup->timer);
1228                                         spin_unlock_irqrestore(&ide_lock, flags);
1229                                         return;
1230                                 }
1231                         }
1232                         hwgroup->handler = NULL;
1233                         /*
1234                          * We need to simulate a real interrupt when invoking
1235                          * the handler() function, which means we need to
1236                          * globally mask the specific IRQ:
1237                          */
1238                         spin_unlock(&ide_lock);
1239                         hwif  = HWIF(drive);
1240                         /* disable_irq_nosync ?? */
1241                         disable_irq(hwif->irq);
1242                         /* local CPU only,
1243                          * as if we were handling an interrupt */
1244                         local_irq_disable();
1245                         if (hwgroup->polling) {
1246                                 startstop = handler(drive);
1247                         } else if (drive_is_ready(drive)) {
1248                                 if (drive->waiting_for_dma)
1249                                         hwif->dma_ops->dma_lost_irq(drive);
1250                                 (void)ide_ack_intr(hwif);
1251                                 printk(KERN_WARNING "%s: lost interrupt\n", drive->name);
1252                                 startstop = handler(drive);
1253                         } else {
1254                                 if (drive->waiting_for_dma) {
1255                                         startstop = ide_dma_timeout_retry(drive, wait);
1256                                 } else
1257                                         startstop =
1258                                         ide_error(drive, "irq timeout",
1259                                                   hwif->tp_ops->read_status(hwif));
1260                         }
1261                         drive->service_time = jiffies - drive->service_start;
1262                         spin_lock_irq(&ide_lock);
1263                         enable_irq(hwif->irq);
1264                         if (startstop == ide_stopped)
1265                                 hwgroup->busy = 0;
1266                 }
1267         }
1268         ide_do_request(hwgroup, IDE_NO_IRQ);
1269         spin_unlock_irqrestore(&ide_lock, flags);
1270 }
1271
1272 /**
1273  *      unexpected_intr         -       handle an unexpected IDE interrupt
1274  *      @irq: interrupt line
1275  *      @hwgroup: hwgroup being processed
1276  *
1277  *      There's nothing really useful we can do with an unexpected interrupt,
1278  *      other than reading the status register (to clear it), and logging it.
1279  *      There should be no way that an irq can happen before we're ready for it,
1280  *      so we needn't worry much about losing an "important" interrupt here.
1281  *
1282  *      On laptops (and "green" PCs), an unexpected interrupt occurs whenever
1283  *      the drive enters "idle", "standby", or "sleep" mode, so if the status
1284  *      looks "good", we just ignore the interrupt completely.
1285  *
1286  *      This routine assumes __cli() is in effect when called.
1287  *
1288  *      If an unexpected interrupt happens on irq15 while we are handling irq14
1289  *      and if the two interfaces are "serialized" (CMD640), then it looks like
1290  *      we could screw up by interfering with a new request being set up for
1291  *      irq15.
1292  *
1293  *      In reality, this is a non-issue.  The new command is not sent unless
1294  *      the drive is ready to accept one, in which case we know the drive is
1295  *      not trying to interrupt us.  And ide_set_handler() is always invoked
1296  *      before completing the issuance of any new drive command, so we will not
1297  *      be accidentally invoked as a result of any valid command completion
1298  *      interrupt.
1299  *
1300  *      Note that we must walk the entire hwgroup here. We know which hwif
1301  *      is doing the current command, but we don't know which hwif burped
1302  *      mysteriously.
1303  */
1304
1305 static void unexpected_intr (int irq, ide_hwgroup_t *hwgroup)
1306 {
1307         u8 stat;
1308         ide_hwif_t *hwif = hwgroup->hwif;
1309
1310         /*
1311          * handle the unexpected interrupt
1312          */
1313         do {
1314                 if (hwif->irq == irq) {
1315                         stat = hwif->tp_ops->read_status(hwif);
1316
1317                         if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) {
1318                                 /* Try to not flood the console with msgs */
1319                                 static unsigned long last_msgtime, count;
1320                                 ++count;
1321                                 if (time_after(jiffies, last_msgtime + HZ)) {
1322                                         last_msgtime = jiffies;
1323                                         printk(KERN_ERR "%s%s: unexpected interrupt, "
1324                                                 "status=0x%02x, count=%ld\n",
1325                                                 hwif->name,
1326                                                 (hwif->next==hwgroup->hwif) ? "" : "(?)", stat, count);
1327                                 }
1328                         }
1329                 }
1330         } while ((hwif = hwif->next) != hwgroup->hwif);
1331 }
1332
1333 /**
1334  *      ide_intr        -       default IDE interrupt handler
1335  *      @irq: interrupt number
1336  *      @dev_id: hwif group
1337  *      @regs: unused weirdness from the kernel irq layer
1338  *
1339  *      This is the default IRQ handler for the IDE layer. You should
1340  *      not need to override it. If you do be aware it is subtle in
1341  *      places
1342  *
1343  *      hwgroup->hwif is the interface in the group currently performing
1344  *      a command. hwgroup->drive is the drive and hwgroup->handler is
1345  *      the IRQ handler to call. As we issue a command the handlers
1346  *      step through multiple states, reassigning the handler to the
1347  *      next step in the process. Unlike a smart SCSI controller IDE
1348  *      expects the main processor to sequence the various transfer
1349  *      stages. We also manage a poll timer to catch up with most
1350  *      timeout situations. There are still a few where the handlers
1351  *      don't ever decide to give up.
1352  *
1353  *      The handler eventually returns ide_stopped to indicate the
1354  *      request completed. At this point we issue the next request
1355  *      on the hwgroup and the process begins again.
1356  */
1357
1358 irqreturn_t ide_intr (int irq, void *dev_id)
1359 {
1360         unsigned long flags;
1361         ide_hwgroup_t *hwgroup = (ide_hwgroup_t *)dev_id;
1362         ide_hwif_t *hwif;
1363         ide_drive_t *drive;
1364         ide_handler_t *handler;
1365         ide_startstop_t startstop;
1366
1367         spin_lock_irqsave(&ide_lock, flags);
1368         hwif = hwgroup->hwif;
1369
1370         if (!ide_ack_intr(hwif)) {
1371                 spin_unlock_irqrestore(&ide_lock, flags);
1372                 return IRQ_NONE;
1373         }
1374
1375         if ((handler = hwgroup->handler) == NULL || hwgroup->polling) {
1376                 /*
1377                  * Not expecting an interrupt from this drive.
1378                  * That means this could be:
1379                  *      (1) an interrupt from another PCI device
1380                  *      sharing the same PCI INT# as us.
1381                  * or   (2) a drive just entered sleep or standby mode,
1382                  *      and is interrupting to let us know.
1383                  * or   (3) a spurious interrupt of unknown origin.
1384                  *
1385                  * For PCI, we cannot tell the difference,
1386                  * so in that case we just ignore it and hope it goes away.
1387                  *
1388                  * FIXME: unexpected_intr should be hwif-> then we can
1389                  * remove all the ifdef PCI crap
1390                  */
1391 #ifdef CONFIG_BLK_DEV_IDEPCI
1392                 if (hwif->chipset != ide_pci)
1393 #endif  /* CONFIG_BLK_DEV_IDEPCI */
1394                 {
1395                         /*
1396                          * Probably not a shared PCI interrupt,
1397                          * so we can safely try to do something about it:
1398                          */
1399                         unexpected_intr(irq, hwgroup);
1400 #ifdef CONFIG_BLK_DEV_IDEPCI
1401                 } else {
1402                         /*
1403                          * Whack the status register, just in case
1404                          * we have a leftover pending IRQ.
1405                          */
1406                         (void)hwif->tp_ops->read_status(hwif);
1407 #endif /* CONFIG_BLK_DEV_IDEPCI */
1408                 }
1409                 spin_unlock_irqrestore(&ide_lock, flags);
1410                 return IRQ_NONE;
1411         }
1412         drive = hwgroup->drive;
1413         if (!drive) {
1414                 /*
1415                  * This should NEVER happen, and there isn't much
1416                  * we could do about it here.
1417                  *
1418                  * [Note - this can occur if the drive is hot unplugged]
1419                  */
1420                 spin_unlock_irqrestore(&ide_lock, flags);
1421                 return IRQ_HANDLED;
1422         }
1423         if (!drive_is_ready(drive)) {
1424                 /*
1425                  * This happens regularly when we share a PCI IRQ with
1426                  * another device.  Unfortunately, it can also happen
1427                  * with some buggy drives that trigger the IRQ before
1428                  * their status register is up to date.  Hopefully we have
1429                  * enough advance overhead that the latter isn't a problem.
1430                  */
1431                 spin_unlock_irqrestore(&ide_lock, flags);
1432                 return IRQ_NONE;
1433         }
1434         if (!hwgroup->busy) {
1435                 hwgroup->busy = 1;      /* paranoia */
1436                 printk(KERN_ERR "%s: ide_intr: hwgroup->busy was 0 ??\n", drive->name);
1437         }
1438         hwgroup->handler = NULL;
1439         hwgroup->req_gen++;
1440         del_timer(&hwgroup->timer);
1441         spin_unlock(&ide_lock);
1442
1443         if (hwif->port_ops && hwif->port_ops->clear_irq)
1444                 hwif->port_ops->clear_irq(drive);
1445
1446         if (drive->dev_flags & IDE_DFLAG_UNMASK)
1447                 local_irq_enable_in_hardirq();
1448
1449         /* service this interrupt, may set handler for next interrupt */
1450         startstop = handler(drive);
1451
1452         spin_lock_irq(&ide_lock);
1453         /*
1454          * Note that handler() may have set things up for another
1455          * interrupt to occur soon, but it cannot happen until
1456          * we exit from this routine, because it will be the
1457          * same irq as is currently being serviced here, and Linux
1458          * won't allow another of the same (on any CPU) until we return.
1459          */
1460         drive->service_time = jiffies - drive->service_start;
1461         if (startstop == ide_stopped) {
1462                 if (hwgroup->handler == NULL) { /* paranoia */
1463                         hwgroup->busy = 0;
1464                         ide_do_request(hwgroup, hwif->irq);
1465                 } else {
1466                         printk(KERN_ERR "%s: ide_intr: huh? expected NULL handler "
1467                                 "on exit\n", drive->name);
1468                 }
1469         }
1470         spin_unlock_irqrestore(&ide_lock, flags);
1471         return IRQ_HANDLED;
1472 }
1473
1474 /**
1475  *      ide_do_drive_cmd        -       issue IDE special command
1476  *      @drive: device to issue command
1477  *      @rq: request to issue
1478  *
1479  *      This function issues a special IDE device request
1480  *      onto the request queue.
1481  *
1482  *      the rq is queued at the head of the request queue, displacing
1483  *      the currently-being-processed request and this function
1484  *      returns immediately without waiting for the new rq to be
1485  *      completed.  This is VERY DANGEROUS, and is intended for
1486  *      careful use by the ATAPI tape/cdrom driver code.
1487  */
1488
1489 void ide_do_drive_cmd(ide_drive_t *drive, struct request *rq)
1490 {
1491         unsigned long flags;
1492         ide_hwgroup_t *hwgroup = HWGROUP(drive);
1493
1494         spin_lock_irqsave(&ide_lock, flags);
1495         hwgroup->rq = NULL;
1496         __elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 0);
1497         blk_start_queueing(drive->queue);
1498         spin_unlock_irqrestore(&ide_lock, flags);
1499 }
1500
1501 EXPORT_SYMBOL(ide_do_drive_cmd);
1502
1503 void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma)
1504 {
1505         ide_hwif_t *hwif = drive->hwif;
1506         ide_task_t task;
1507
1508         memset(&task, 0, sizeof(task));
1509         task.tf_flags = IDE_TFLAG_OUT_LBAH | IDE_TFLAG_OUT_LBAM |
1510                         IDE_TFLAG_OUT_FEATURE | tf_flags;
1511         task.tf.feature = dma;          /* Use PIO/DMA */
1512         task.tf.lbam    = bcount & 0xff;
1513         task.tf.lbah    = (bcount >> 8) & 0xff;
1514
1515         ide_tf_dump(drive->name, &task.tf);
1516         hwif->tp_ops->set_irq(hwif, 1);
1517         SELECT_MASK(drive, 0);
1518         hwif->tp_ops->tf_load(drive, &task);
1519 }
1520
1521 EXPORT_SYMBOL_GPL(ide_pktcmd_tf_load);
1522
1523 void ide_pad_transfer(ide_drive_t *drive, int write, int len)
1524 {
1525         ide_hwif_t *hwif = drive->hwif;
1526         u8 buf[4] = { 0 };
1527
1528         while (len > 0) {
1529                 if (write)
1530                         hwif->tp_ops->output_data(drive, NULL, buf, min(4, len));
1531                 else
1532                         hwif->tp_ops->input_data(drive, NULL, buf, min(4, len));
1533                 len -= 4;
1534         }
1535 }
1536 EXPORT_SYMBOL_GPL(ide_pad_transfer);