]> pilppa.org Git - linux-2.6-omap-h63xx.git/blob - drivers/ieee1394/highlevel.h
[PATCH] ieee1394: coding style and comment fixes in midlayer header files
[linux-2.6-omap-h63xx.git] / drivers / ieee1394 / highlevel.h
1 #ifndef IEEE1394_HIGHLEVEL_H
2 #define IEEE1394_HIGHLEVEL_H
3
4 /* internal to ieee1394 core */
5 struct hpsb_address_serve {
6         struct list_head host_list;     /* per host list */
7         struct list_head hl_list;       /* hpsb_highlevel list */
8         struct hpsb_address_ops *op;
9         struct hpsb_host *host;
10         u64 start;      /* first address handled, quadlet aligned */
11         u64 end;        /* first address behind, quadlet aligned */
12 };
13
14 /* Only the following structures are of interest to actual highlevel drivers. */
15
16 struct hpsb_highlevel {
17         struct module *owner;
18         const char *name;
19
20         /* Any of the following pointers can legally be NULL, except for
21          * iso_receive which can only be NULL when you don't request
22          * channels. */
23
24         /* New host initialized.  Will also be called during
25          * hpsb_register_highlevel for all hosts already installed. */
26         void (*add_host)(struct hpsb_host *host);
27
28         /* Host about to be removed.  Will also be called during
29          * hpsb_unregister_highlevel once for each host. */
30         void (*remove_host)(struct hpsb_host *host);
31
32         /* Host experienced bus reset with possible configuration changes.
33          * Note that this one may occur during interrupt/bottom half handling.
34          * You can not expect to be able to do stock hpsb_reads. */
35         void (*host_reset)(struct hpsb_host *host);
36
37         /* An isochronous packet was received.  Channel contains the channel
38          * number for your convenience, it is also contained in the included
39          * packet header (first quadlet, CRCs are missing).  You may get called
40          * for channel/host combinations you did not request. */
41         void (*iso_receive)(struct hpsb_host *host, int channel,
42                             quadlet_t *data, size_t length);
43
44         /* A write request was received on either the FCP_COMMAND (direction =
45          * 0) or the FCP_RESPONSE (direction = 1) register.  The cts arg
46          * contains the cts field (first byte of data). */
47         void (*fcp_request)(struct hpsb_host *host, int nodeid, int direction,
48                             int cts, u8 *data, size_t length);
49
50         /* These are initialized by the subsystem when the
51          * hpsb_higlevel is registered. */
52         struct list_head hl_list;
53         struct list_head irq_list;
54         struct list_head addr_list;
55
56         struct list_head host_info_list;
57         rwlock_t host_info_lock;
58 };
59
60 struct hpsb_address_ops {
61         /*
62          * Null function pointers will make the respective operation complete
63          * with RCODE_TYPE_ERROR.  Makes for easy to implement read-only
64          * registers (just leave everything but read NULL).
65          *
66          * All functions shall return appropriate IEEE 1394 rcodes.
67          */
68
69         /* These functions have to implement block reads for themselves.
70          *
71          * These functions either return a response code or a negative number.
72          * In the first case a response will be generated.  In the latter case,
73          * no response will be sent and the driver which handled the request
74          * will send the response itself. */
75         int (*read)(struct hpsb_host *host, int nodeid, quadlet_t *buffer,
76                     u64 addr, size_t length, u16 flags);
77         int (*write)(struct hpsb_host *host, int nodeid, int destid,
78                      quadlet_t *data, u64 addr, size_t length, u16 flags);
79
80         /* Lock transactions: write results of ext_tcode operation into
81          * *store. */
82         int (*lock)(struct hpsb_host *host, int nodeid, quadlet_t *store,
83                     u64 addr, quadlet_t data, quadlet_t arg, int ext_tcode,
84                     u16 flags);
85         int (*lock64)(struct hpsb_host *host, int nodeid, octlet_t *store,
86                       u64 addr, octlet_t data, octlet_t arg, int ext_tcode,
87                       u16 flags);
88 };
89
90 void highlevel_add_host(struct hpsb_host *host);
91 void highlevel_remove_host(struct hpsb_host *host);
92 void highlevel_host_reset(struct hpsb_host *host);
93
94 /*
95  * These functions are called to handle transactions. They are called when a
96  * packet arrives.  The flags argument contains the second word of the first
97  * header quadlet of the incoming packet (containing transaction label, retry
98  * code, transaction code and priority).  These functions either return a
99  * response code or a negative number.  In the first case a response will be
100  * generated.  In the latter case, no response will be sent and the driver which
101  * handled the request will send the response itself.
102  */
103 int highlevel_read(struct hpsb_host *host, int nodeid, void *data, u64 addr,
104                    unsigned int length, u16 flags);
105 int highlevel_write(struct hpsb_host *host, int nodeid, int destid, void *data,
106                     u64 addr, unsigned int length, u16 flags);
107 int highlevel_lock(struct hpsb_host *host, int nodeid, quadlet_t *store,
108                    u64 addr, quadlet_t data, quadlet_t arg, int ext_tcode,
109                    u16 flags);
110 int highlevel_lock64(struct hpsb_host *host, int nodeid, octlet_t *store,
111                      u64 addr, octlet_t data, octlet_t arg, int ext_tcode,
112                      u16 flags);
113
114 void highlevel_iso_receive(struct hpsb_host *host, void *data, size_t length);
115 void highlevel_fcp_request(struct hpsb_host *host, int nodeid, int direction,
116                            void *data, size_t length);
117
118 /*
119  * Register highlevel driver.  The name pointer has to stay valid at all times
120  * because the string is not copied.
121  */
122 void hpsb_register_highlevel(struct hpsb_highlevel *hl);
123 void hpsb_unregister_highlevel(struct hpsb_highlevel *hl);
124
125 /*
126  * Register handlers for host address spaces.  Start and end are 48 bit pointers
127  * and have to be quadlet aligned.  Argument "end" points to the first address
128  * behind the handled addresses.  This function can be called multiple times for
129  * a single hpsb_highlevel to implement sparse register sets.  The requested
130  * region must not overlap any previously allocated region, otherwise
131  * registering will fail.
132  *
133  * It returns true for successful allocation.  Address spaces can be
134  * unregistered with hpsb_unregister_addrspace.  All remaining address spaces
135  * are automatically deallocated together with the hpsb_highlevel.
136  */
137 u64 hpsb_allocate_and_register_addrspace(struct hpsb_highlevel *hl,
138                                          struct hpsb_host *host,
139                                          struct hpsb_address_ops *ops,
140                                          u64 size, u64 alignment,
141                                          u64 start, u64 end);
142 int hpsb_register_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host,
143                             struct hpsb_address_ops *ops, u64 start, u64 end);
144 int hpsb_unregister_addrspace(struct hpsb_highlevel *hl, struct hpsb_host *host,
145                               u64 start);
146
147 /*
148  * Enable or disable receving a certain isochronous channel through the
149  * iso_receive op.
150  */
151 int hpsb_listen_channel(struct hpsb_highlevel *hl, struct hpsb_host *host,
152                          unsigned int channel);
153 void hpsb_unlisten_channel(struct hpsb_highlevel *hl, struct hpsb_host *host,
154                            unsigned int channel);
155
156 /* Retrieve a hostinfo pointer bound to this driver/host */
157 void *hpsb_get_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host);
158
159 /* Allocate a hostinfo pointer of data_size bound to this driver/host */
160 void *hpsb_create_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host,
161                            size_t data_size);
162
163 /* Free and remove the hostinfo pointer bound to this driver/host */
164 void hpsb_destroy_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host);
165
166 /* Set an alternate lookup key for the hostinfo bound to this driver/host */
167 void hpsb_set_hostinfo_key(struct hpsb_highlevel *hl, struct hpsb_host *host,
168                            unsigned long key);
169
170 /* Retrieve the alternate lookup key for the hostinfo bound to this
171  * driver/host */
172 unsigned long hpsb_get_hostinfo_key(struct hpsb_highlevel *hl,
173                                     struct hpsb_host *host);
174
175 /* Retrieve a hostinfo pointer bound to this driver using its alternate key */
176 void *hpsb_get_hostinfo_bykey(struct hpsb_highlevel *hl, unsigned long key);
177
178 /* Set the hostinfo pointer to something useful. Usually follows a call to
179  * hpsb_create_hostinfo, where the size is 0. */
180 int hpsb_set_hostinfo(struct hpsb_highlevel *hl, struct hpsb_host *host,
181                       void *data);
182
183 /* Retrieve hpsb_host using a highlevel handle and a key */
184 struct hpsb_host *hpsb_get_host_bykey(struct hpsb_highlevel *hl,
185                                       unsigned long key);
186
187 #endif /* IEEE1394_HIGHLEVEL_H */