2 # Multifunction miscellaneous devices
5 menu "Multifunction device drivers"
13 tristate "Support for Silicon Motion SM501"
15 This is the core driver for the Silicon Motion SM501 multimedia
16 companion chip. This device is a multifunction device which may
17 provide numerous interfaces including USB host controller, USB gadget,
18 asynchronous serial ports, audio functions, and a dual display video
19 interface. The device may be connected by PCI or local bus with
20 varying functions enabled.
23 bool "Export GPIO via GPIO layer"
24 depends on MFD_SM501 && GPIOLIB
26 This option uses the gpio library layer to export the 64 GPIO
27 lines on the SM501. The platform data is used to supply the
28 base number for the first GPIO line to register.
31 bool "Support for Compaq ASIC3"
32 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
34 This driver supports the ASIC3 multifunction chip found on many
35 PDAs (mainly iPAQ and HTC based ones)
37 config MFD_DM355EVM_MSP
38 bool "DaVinci DM355 EVM microcontroller"
39 depends on I2C && MACH_DAVINCI_DM355_EVM
41 This driver supports the MSP430 microcontroller used on these
42 boards. MSP430 firmware manages resets and power sequencing,
43 inputs from buttons and the IR remote, LEDs, an RTC, and more.
46 bool "HTC EGPIO support"
47 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
49 This driver supports the CPLD egpio chip present on
50 several HTC phones. It provides basic support for input
51 pins, output pins, and irqs.
54 tristate "HTC PASIC3 LED/DS1WM chip support"
56 This core driver provides register access for the LED/DS1WM
57 chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
58 HTC Magician devices, respectively. Actual functionality is
59 handled by the leds-pasic3 and ds1wm drivers.
62 tristate "Philips UCB1400 Core driver"
66 This enables support for the Philips UCB1400 core functions.
67 The UCB1400 is an AC97 audio codec.
69 To compile this driver as a module, choose M here: the
70 module will be called ucb1400_core.
73 bool "Texas Instruments TWL4030/TPS659x0 Support"
74 depends on I2C=y && GENERIC_HARDIRQS
76 Say yes here if you have TWL4030 family chip on your board.
77 This core driver provides register access and IRQ handling
78 facilities, and registers devices for the various functions
79 so that function-specific drivers can bind to them.
81 These multi-function chips are found on many OMAP2 and OMAP3
82 boards, providing power management, RTC, GPIO, keypad, a
83 high speed USB OTG transceiver, an audio codec (on most
84 versions) and many other features.
91 bool "Support Toshiba T7L66XB"
92 depends on ARM && HAVE_CLK
96 Support for Toshiba Mobile IO Controller T7L66XB
99 bool "Support Toshiba TC6387XB"
100 depends on ARM && HAVE_CLK
104 Support for Toshiba Mobile IO Controller TC6387XB
107 bool "Support Toshiba TC6393XB"
108 depends on GPIOLIB && ARM
112 Support for Toshiba Mobile IO Controller TC6393XB
115 bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
118 Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
119 ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
120 usually found on PXA processors-based platforms. This includes
121 the I2C driver and the core APIs _only_, you have to select
122 individual components like LCD backlight, voltage regulators,
123 LEDs and battery-charger under the corresponding menus.
126 tristate "Support Wolfson Microelectronics WM8400"
130 Support for the Wolfson Microelecronics WM8400 PMIC and audio
131 CODEC. This driver adds provides common support for accessing
132 the device, additional drivers must be enabled in order to use
133 the functionality of the device.
138 config MFD_WM8350_CONFIG_MODE_0
140 depends on MFD_WM8350
142 config MFD_WM8350_CONFIG_MODE_1
144 depends on MFD_WM8350
146 config MFD_WM8350_CONFIG_MODE_2
148 depends on MFD_WM8350
150 config MFD_WM8350_CONFIG_MODE_3
152 depends on MFD_WM8350
154 config MFD_WM8351_CONFIG_MODE_0
156 depends on MFD_WM8350
158 config MFD_WM8351_CONFIG_MODE_1
160 depends on MFD_WM8350
162 config MFD_WM8351_CONFIG_MODE_2
164 depends on MFD_WM8350
166 config MFD_WM8351_CONFIG_MODE_3
168 depends on MFD_WM8350
170 config MFD_WM8352_CONFIG_MODE_0
172 depends on MFD_WM8350
174 config MFD_WM8352_CONFIG_MODE_1
176 depends on MFD_WM8350
178 config MFD_WM8352_CONFIG_MODE_2
180 depends on MFD_WM8350
182 config MFD_WM8352_CONFIG_MODE_3
184 depends on MFD_WM8350
186 config MFD_WM8350_I2C
187 tristate "Support Wolfson Microelectronics WM8350 with I2C"
191 The WM8350 is an integrated audio and power management
192 subsystem with watchdog and RTC functionality for embedded
193 systems. This option enables core support for the WM8350 with
194 I2C as the control interface. Additional options must be
195 selected to enable support for the functionality of the chip.
199 menu "Multimedia Capabilities Port drivers"
200 depends on ARCH_SA1100
207 tristate "Support SA11x0 MCP interface"
208 depends on ARCH_SA1100
213 tristate "Support for UCB1200 / UCB1300"
216 config MCP_UCB1200_TS
217 tristate "Touchscreen interface support"
218 depends on MCP_UCB1200 && INPUT