2 # Multifunction miscellaneous devices
5 menu "Multifunction device drivers"
13 tristate "Support for Silicon Motion SM501"
15 This is the core driver for the Silicon Motion SM501 multimedia
16 companion chip. This device is a multifunction device which may
17 provide numerous interfaces including USB host controller, USB gadget,
18 asynchronous serial ports, audio functions, and a dual display video
19 interface. The device may be connected by PCI or local bus with
20 varying functions enabled.
23 bool "Export GPIO via GPIO layer"
24 depends on MFD_SM501 && GPIOLIB
26 This option uses the gpio library layer to export the 64 GPIO
27 lines on the SM501. The platform data is used to supply the
28 base number for the first GPIO line to register.
31 bool "Support for Compaq ASIC3"
32 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
34 This driver supports the ASIC3 multifunction chip found on many
35 PDAs (mainly iPAQ and HTC based ones)
37 config MFD_DM355EVM_MSP
38 bool "DaVinci DM355 EVM microcontroller"
39 depends on I2C && MACH_DAVINCI_DM355_EVM
41 This driver supports the MSP430 microcontroller used on these
42 boards. MSP430 firmware manages resets and power sequencing,
43 inputs from buttons and the IR remote, LEDs, an RTC, and more.
46 bool "HTC EGPIO support"
47 depends on GENERIC_HARDIRQS && GPIOLIB && ARM
49 This driver supports the CPLD egpio chip present on
50 several HTC phones. It provides basic support for input
51 pins, output pins, and irqs.
54 tristate "HTC PASIC3 LED/DS1WM chip support"
56 This core driver provides register access for the LED/DS1WM
57 chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
58 HTC Magician devices, respectively. Actual functionality is
59 handled by the leds-pasic3 and ds1wm drivers.
62 tristate "Philips UCB1400 Core driver"
66 This enables support for the Philips UCB1400 core functions.
67 The UCB1400 is an AC97 audio codec.
69 To compile this driver as a module, choose M here: the
70 module will be called ucb1400_core.
73 tristate "TPS6501x Power Management chips"
74 depends on I2C && GPIOLIB
75 default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
77 If you say yes here you get support for the TPS6501x series of
78 Power Management chips. These include voltage regulators,
79 lithium ion/polymer battery charging, and other features that
80 are often used in portable devices like cell phones and cameras.
82 This driver can also be built as a module. If so, the module
83 will be called tps65010.
86 bool "Texas Instruments TWL92330/Menelaus PM chip"
87 depends on I2C=y && ARCH_OMAP24XX
89 If you say yes here you get support for the Texas Instruments
90 TWL92330/Menelaus Power Management chip. This include voltage
91 regulators, Dual slot memory card tranceivers, real-time clock
92 and other features that are often used in portable devices like
96 bool "Texas Instruments TWL4030/TPS659x0 Support"
97 depends on I2C=y && GENERIC_HARDIRQS
99 Say yes here if you have TWL4030 family chip on your board.
100 This core driver provides register access and IRQ handling
101 facilities, and registers devices for the various functions
102 so that function-specific drivers can bind to them.
104 These multi-function chips are found on many OMAP2 and OMAP3
105 boards, providing power management, RTC, GPIO, keypad, a
106 high speed USB OTG transceiver, an audio codec (on most
107 versions) and many other features.
110 bool "Support power resources on TWL4030 family chips"
111 depends on TWL4030_CORE
113 Say yes here if you want to use the power resources on the
114 TWL4030 family chips. Most of these resources are regulators,
115 which have a separate driver; some are control signals, such
116 as clock request handshaking.
118 This driver uses board-specific data to initialize the resources
119 and load scripts controling which resources are switched off/on
120 or reset when a sleep, wakeup or warm reset event occurs.
127 bool "Support Toshiba T7L66XB"
128 depends on ARM && HAVE_CLK
132 Support for Toshiba Mobile IO Controller T7L66XB
135 bool "Support Toshiba TC6387XB"
136 depends on ARM && HAVE_CLK
140 Support for Toshiba Mobile IO Controller TC6387XB
143 bool "Support Toshiba TC6393XB"
144 depends on GPIOLIB && ARM
148 Support for Toshiba Mobile IO Controller TC6393XB
151 bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
154 Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
155 ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
156 usually found on PXA processors-based platforms. This includes
157 the I2C driver and the core APIs _only_, you have to select
158 individual components like LCD backlight, voltage regulators,
159 LEDs and battery-charger under the corresponding menus.
162 tristate "Support Wolfson Microelectronics WM8400"
166 Support for the Wolfson Microelecronics WM8400 PMIC and audio
167 CODEC. This driver adds provides common support for accessing
168 the device, additional drivers must be enabled in order to use
169 the functionality of the device.
174 config MFD_WM8350_CONFIG_MODE_0
176 depends on MFD_WM8350
178 config MFD_WM8350_CONFIG_MODE_1
180 depends on MFD_WM8350
182 config MFD_WM8350_CONFIG_MODE_2
184 depends on MFD_WM8350
186 config MFD_WM8350_CONFIG_MODE_3
188 depends on MFD_WM8350
190 config MFD_WM8351_CONFIG_MODE_0
192 depends on MFD_WM8350
194 config MFD_WM8351_CONFIG_MODE_1
196 depends on MFD_WM8350
198 config MFD_WM8351_CONFIG_MODE_2
200 depends on MFD_WM8350
202 config MFD_WM8351_CONFIG_MODE_3
204 depends on MFD_WM8350
206 config MFD_WM8352_CONFIG_MODE_0
208 depends on MFD_WM8350
210 config MFD_WM8352_CONFIG_MODE_1
212 depends on MFD_WM8350
214 config MFD_WM8352_CONFIG_MODE_2
216 depends on MFD_WM8350
218 config MFD_WM8352_CONFIG_MODE_3
220 depends on MFD_WM8350
222 config MFD_WM8350_I2C
223 tristate "Support Wolfson Microelectronics WM8350 with I2C"
227 The WM8350 is an integrated audio and power management
228 subsystem with watchdog and RTC functionality for embedded
229 systems. This option enables core support for the WM8350 with
230 I2C as the control interface. Additional options must be
231 selected to enable support for the functionality of the chip.
234 tristate "Support for NXP PCF50633"
237 Say yes here if you have NXP PCF50633 chip on your board.
238 This core driver provides register access and IRQ handling
239 facilities, and registers devices for the various functions
240 so that function-specific drivers can bind to them.
243 tristate "Support for NXP PCF50633 ADC"
244 depends on MFD_PCF50633
246 Say yes here if you want to include support for ADC in the
250 tristate "Support for NXP PCF50633 GPIO"
251 depends on MFD_PCF50633
253 Say yes here if you want to include support GPIO for pins on
258 menu "Multimedia Capabilities Port drivers"
259 depends on ARCH_SA1100
266 tristate "Support SA11x0 MCP interface"
267 depends on ARCH_SA1100
272 tristate "Support for UCB1200 / UCB1300"
275 config MCP_UCB1200_TS
276 tristate "Touchscreen interface support"
277 depends on MCP_UCB1200 && INPUT