2 * Copyright 2002-2005, Instant802 Networks, Inc.
3 * Copyright 2005-2006, Devicescape Software, Inc.
4 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
11 #include <net/mac80211.h>
12 #include <net/ieee80211_radiotap.h>
13 #include <linux/module.h>
14 #include <linux/init.h>
15 #include <linux/netdevice.h>
16 #include <linux/types.h>
17 #include <linux/slab.h>
18 #include <linux/skbuff.h>
19 #include <linux/etherdevice.h>
20 #include <linux/if_arp.h>
21 #include <linux/wireless.h>
22 #include <linux/rtnetlink.h>
23 #include <linux/bitmap.h>
24 #include <net/net_namespace.h>
25 #include <net/cfg80211.h>
27 #include "ieee80211_i.h"
36 #include "debugfs_netdev.h"
39 * For seeing transmitted packets on monitor interfaces
40 * we have a radiotap header too.
42 struct ieee80211_tx_status_rtap_hdr {
43 struct ieee80211_radiotap_header hdr;
46 } __attribute__ ((packed));
48 /* common interface routines */
50 static int header_parse_80211(const struct sk_buff *skb, unsigned char *haddr)
52 memcpy(haddr, skb_mac_header(skb) + 10, ETH_ALEN); /* addr2 */
56 /* must be called under mdev tx lock */
57 static void ieee80211_configure_filter(struct ieee80211_local *local)
59 unsigned int changed_flags;
60 unsigned int new_flags = 0;
62 if (atomic_read(&local->iff_promiscs))
63 new_flags |= FIF_PROMISC_IN_BSS;
65 if (atomic_read(&local->iff_allmultis))
66 new_flags |= FIF_ALLMULTI;
69 new_flags |= FIF_BCN_PRBRESP_PROMISC;
71 if (local->fif_fcsfail)
72 new_flags |= FIF_FCSFAIL;
74 if (local->fif_plcpfail)
75 new_flags |= FIF_PLCPFAIL;
77 if (local->fif_control)
78 new_flags |= FIF_CONTROL;
80 if (local->fif_other_bss)
81 new_flags |= FIF_OTHER_BSS;
83 changed_flags = local->filter_flags ^ new_flags;
88 local->ops->configure_filter(local_to_hw(local),
89 changed_flags, &new_flags,
90 local->mdev->mc_count,
91 local->mdev->mc_list);
93 WARN_ON(new_flags & (1<<31));
95 local->filter_flags = new_flags & ~(1<<31);
98 /* master interface */
100 static int ieee80211_master_open(struct net_device *dev)
102 struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
103 struct ieee80211_sub_if_data *sdata;
104 int res = -EOPNOTSUPP;
106 /* we hold the RTNL here so can safely walk the list */
107 list_for_each_entry(sdata, &local->interfaces, list) {
108 if (netif_running(sdata->dev)) {
117 netif_tx_start_all_queues(local->mdev);
122 static int ieee80211_master_stop(struct net_device *dev)
124 struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
125 struct ieee80211_sub_if_data *sdata;
127 /* we hold the RTNL here so can safely walk the list */
128 list_for_each_entry(sdata, &local->interfaces, list)
129 if (netif_running(sdata->dev))
130 dev_close(sdata->dev);
135 static void ieee80211_master_set_multicast_list(struct net_device *dev)
137 struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
139 ieee80211_configure_filter(local);
142 /* regular interfaces */
144 static int ieee80211_change_mtu(struct net_device *dev, int new_mtu)
147 struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
149 meshhdrlen = (sdata->vif.type == IEEE80211_IF_TYPE_MESH_POINT) ? 5 : 0;
151 /* FIX: what would be proper limits for MTU?
152 * This interface uses 802.3 frames. */
154 new_mtu > IEEE80211_MAX_DATA_LEN - 24 - 6 - meshhdrlen) {
158 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
159 printk(KERN_DEBUG "%s: setting MTU %d\n", dev->name, new_mtu);
160 #endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
165 static inline int identical_mac_addr_allowed(int type1, int type2)
167 return (type1 == IEEE80211_IF_TYPE_MNTR ||
168 type2 == IEEE80211_IF_TYPE_MNTR ||
169 (type1 == IEEE80211_IF_TYPE_AP &&
170 type2 == IEEE80211_IF_TYPE_WDS) ||
171 (type1 == IEEE80211_IF_TYPE_WDS &&
172 (type2 == IEEE80211_IF_TYPE_WDS ||
173 type2 == IEEE80211_IF_TYPE_AP)) ||
174 (type1 == IEEE80211_IF_TYPE_AP &&
175 type2 == IEEE80211_IF_TYPE_VLAN) ||
176 (type1 == IEEE80211_IF_TYPE_VLAN &&
177 (type2 == IEEE80211_IF_TYPE_AP ||
178 type2 == IEEE80211_IF_TYPE_VLAN)));
181 static int ieee80211_open(struct net_device *dev)
183 struct ieee80211_sub_if_data *sdata, *nsdata;
184 struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
185 struct sta_info *sta;
186 struct ieee80211_if_init_conf conf;
189 bool need_hw_reconfig = 0;
190 u8 null_addr[ETH_ALEN] = {0};
192 sdata = IEEE80211_DEV_TO_SUB_IF(dev);
194 /* fail early if user set an invalid address */
195 if (compare_ether_addr(dev->dev_addr, null_addr) &&
196 !is_valid_ether_addr(dev->dev_addr))
197 return -EADDRNOTAVAIL;
199 /* we hold the RTNL here so can safely walk the list */
200 list_for_each_entry(nsdata, &local->interfaces, list) {
201 struct net_device *ndev = nsdata->dev;
203 if (ndev != dev && netif_running(ndev)) {
205 * Allow only a single IBSS interface to be up at any
206 * time. This is restricted because beacon distribution
207 * cannot work properly if both are in the same IBSS.
209 * To remove this restriction we'd have to disallow them
210 * from setting the same SSID on different IBSS interfaces
211 * belonging to the same hardware. Then, however, we're
212 * faced with having to adopt two different TSF timers...
214 if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS &&
215 nsdata->vif.type == IEEE80211_IF_TYPE_IBSS)
219 * The remaining checks are only performed for interfaces
220 * with the same MAC address.
222 if (compare_ether_addr(dev->dev_addr, ndev->dev_addr))
226 * check whether it may have the same address
228 if (!identical_mac_addr_allowed(sdata->vif.type,
233 * can only add VLANs to enabled APs
235 if (sdata->vif.type == IEEE80211_IF_TYPE_VLAN &&
236 nsdata->vif.type == IEEE80211_IF_TYPE_AP)
237 sdata->bss = &nsdata->u.ap;
241 switch (sdata->vif.type) {
242 case IEEE80211_IF_TYPE_WDS:
243 if (!is_valid_ether_addr(sdata->u.wds.remote_addr))
246 case IEEE80211_IF_TYPE_VLAN:
249 list_add(&sdata->u.vlan.list, &sdata->bss->vlans);
251 case IEEE80211_IF_TYPE_AP:
252 sdata->bss = &sdata->u.ap;
254 case IEEE80211_IF_TYPE_MESH_POINT:
255 /* mesh ifaces must set allmulti to forward mcast traffic */
256 atomic_inc(&local->iff_allmultis);
258 case IEEE80211_IF_TYPE_STA:
259 case IEEE80211_IF_TYPE_MNTR:
260 case IEEE80211_IF_TYPE_IBSS:
261 /* no special treatment */
263 case IEEE80211_IF_TYPE_INVALID:
269 if (local->open_count == 0) {
271 if (local->ops->start)
272 res = local->ops->start(local_to_hw(local));
275 need_hw_reconfig = 1;
276 ieee80211_led_radio(local, local->hw.conf.radio_enabled);
280 * Check all interfaces and copy the hopefully now-present
281 * MAC address to those that have the special null one.
283 list_for_each_entry(nsdata, &local->interfaces, list) {
284 struct net_device *ndev = nsdata->dev;
287 * No need to check netif_running since we do not allow
288 * it to start up with this invalid address.
290 if (compare_ether_addr(null_addr, ndev->dev_addr) == 0)
291 memcpy(ndev->dev_addr,
292 local->hw.wiphy->perm_addr,
296 if (compare_ether_addr(null_addr, local->mdev->dev_addr) == 0)
297 memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr,
301 * Validate the MAC address for this device.
303 if (!is_valid_ether_addr(dev->dev_addr)) {
304 if (!local->open_count && local->ops->stop)
305 local->ops->stop(local_to_hw(local));
306 return -EADDRNOTAVAIL;
309 switch (sdata->vif.type) {
310 case IEEE80211_IF_TYPE_VLAN:
311 /* no need to tell driver */
313 case IEEE80211_IF_TYPE_MNTR:
314 if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
315 local->cooked_mntrs++;
319 /* must be before the call to ieee80211_configure_filter */
321 if (local->monitors == 1)
322 local->hw.conf.flags |= IEEE80211_CONF_RADIOTAP;
324 if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
325 local->fif_fcsfail++;
326 if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL)
327 local->fif_plcpfail++;
328 if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL)
329 local->fif_control++;
330 if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS)
331 local->fif_other_bss++;
333 netif_addr_lock_bh(local->mdev);
334 ieee80211_configure_filter(local);
335 netif_addr_unlock_bh(local->mdev);
337 case IEEE80211_IF_TYPE_STA:
338 case IEEE80211_IF_TYPE_IBSS:
339 sdata->u.sta.flags &= ~IEEE80211_STA_PREV_BSSID_SET;
342 conf.vif = &sdata->vif;
343 conf.type = sdata->vif.type;
344 conf.mac_addr = dev->dev_addr;
345 res = local->ops->add_interface(local_to_hw(local), &conf);
349 if (ieee80211_vif_is_mesh(&sdata->vif))
350 ieee80211_start_mesh(sdata);
351 changed |= ieee80211_reset_erp_info(sdata);
352 ieee80211_bss_info_change_notify(sdata, changed);
353 ieee80211_enable_keys(sdata);
355 if (sdata->vif.type == IEEE80211_IF_TYPE_STA &&
356 !(sdata->flags & IEEE80211_SDATA_USERSPACE_MLME))
357 netif_carrier_off(dev);
359 netif_carrier_on(dev);
362 if (sdata->vif.type == IEEE80211_IF_TYPE_WDS) {
363 /* Create STA entry for the WDS peer */
364 sta = sta_info_alloc(sdata, sdata->u.wds.remote_addr,
368 goto err_del_interface;
371 /* no locking required since STA is not live yet */
372 sta->flags |= WLAN_STA_AUTHORIZED;
374 res = sta_info_insert(sta);
376 /* STA has been freed */
377 goto err_del_interface;
381 if (local->open_count == 0) {
382 res = dev_open(local->mdev);
385 goto err_del_interface;
386 tasklet_enable(&local->tx_pending_tasklet);
387 tasklet_enable(&local->tasklet);
391 * set_multicast_list will be invoked by the networking core
392 * which will check whether any increments here were done in
393 * error and sync them down to the hardware as filter flags.
395 if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
396 atomic_inc(&local->iff_allmultis);
398 if (sdata->flags & IEEE80211_SDATA_PROMISC)
399 atomic_inc(&local->iff_promiscs);
402 if (need_hw_reconfig)
403 ieee80211_hw_config(local);
406 * ieee80211_sta_work is disabled while network interface
407 * is down. Therefore, some configuration changes may not
408 * yet be effective. Trigger execution of ieee80211_sta_work
411 if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
412 sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
413 struct ieee80211_if_sta *ifsta = &sdata->u.sta;
414 queue_work(local->hw.workqueue, &ifsta->work);
417 netif_tx_start_all_queues(dev);
421 local->ops->remove_interface(local_to_hw(local), &conf);
423 if (!local->open_count && local->ops->stop)
424 local->ops->stop(local_to_hw(local));
427 if (sdata->vif.type == IEEE80211_IF_TYPE_VLAN)
428 list_del(&sdata->u.vlan.list);
432 static int ieee80211_stop(struct net_device *dev)
434 struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
435 struct ieee80211_local *local = sdata->local;
436 struct ieee80211_if_init_conf conf;
437 struct sta_info *sta;
440 * Stop TX on this interface first.
442 netif_tx_stop_all_queues(dev);
445 * Now delete all active aggregation sessions.
449 list_for_each_entry_rcu(sta, &local->sta_list, list) {
450 if (sta->sdata == sdata)
451 ieee80211_sta_tear_down_BA_sessions(sdata, sta->addr);
457 * Remove all stations associated with this interface.
459 * This must be done before calling ops->remove_interface()
460 * because otherwise we can later invoke ops->sta_notify()
461 * whenever the STAs are removed, and that invalidates driver
462 * assumptions about always getting a vif pointer that is valid
463 * (because if we remove a STA after ops->remove_interface()
464 * the driver will have removed the vif info already!)
466 * We could relax this and only unlink the stations from the
467 * hash table and list but keep them on a per-sdata list that
468 * will be inserted back again when the interface is brought
469 * up again, but I don't currently see a use case for that,
470 * except with WDS which gets a STA entry created when it is
473 sta_info_flush(local, sdata);
476 * Don't count this interface for promisc/allmulti while it
477 * is down. dev_mc_unsync() will invoke set_multicast_list
478 * on the master interface which will sync these down to the
479 * hardware as filter flags.
481 if (sdata->flags & IEEE80211_SDATA_ALLMULTI)
482 atomic_dec(&local->iff_allmultis);
484 if (sdata->flags & IEEE80211_SDATA_PROMISC)
485 atomic_dec(&local->iff_promiscs);
487 dev_mc_unsync(local->mdev, dev);
489 /* APs need special treatment */
490 if (sdata->vif.type == IEEE80211_IF_TYPE_AP) {
491 struct ieee80211_sub_if_data *vlan, *tmp;
492 struct beacon_data *old_beacon = sdata->u.ap.beacon;
495 rcu_assign_pointer(sdata->u.ap.beacon, NULL);
499 /* down all dependent devices, that is VLANs */
500 list_for_each_entry_safe(vlan, tmp, &sdata->u.ap.vlans,
502 dev_close(vlan->dev);
503 WARN_ON(!list_empty(&sdata->u.ap.vlans));
508 switch (sdata->vif.type) {
509 case IEEE80211_IF_TYPE_VLAN:
510 list_del(&sdata->u.vlan.list);
511 /* no need to tell driver */
513 case IEEE80211_IF_TYPE_MNTR:
514 if (sdata->u.mntr_flags & MONITOR_FLAG_COOK_FRAMES) {
515 local->cooked_mntrs--;
520 if (local->monitors == 0)
521 local->hw.conf.flags &= ~IEEE80211_CONF_RADIOTAP;
523 if (sdata->u.mntr_flags & MONITOR_FLAG_FCSFAIL)
524 local->fif_fcsfail--;
525 if (sdata->u.mntr_flags & MONITOR_FLAG_PLCPFAIL)
526 local->fif_plcpfail--;
527 if (sdata->u.mntr_flags & MONITOR_FLAG_CONTROL)
528 local->fif_control--;
529 if (sdata->u.mntr_flags & MONITOR_FLAG_OTHER_BSS)
530 local->fif_other_bss--;
532 netif_addr_lock_bh(local->mdev);
533 ieee80211_configure_filter(local);
534 netif_addr_unlock_bh(local->mdev);
536 case IEEE80211_IF_TYPE_MESH_POINT:
537 /* allmulti is always set on mesh ifaces */
538 atomic_dec(&local->iff_allmultis);
540 case IEEE80211_IF_TYPE_STA:
541 case IEEE80211_IF_TYPE_IBSS:
542 sdata->u.sta.state = IEEE80211_DISABLED;
543 memset(sdata->u.sta.bssid, 0, ETH_ALEN);
544 del_timer_sync(&sdata->u.sta.timer);
546 * When we get here, the interface is marked down.
547 * Call synchronize_rcu() to wait for the RX path
548 * should it be using the interface and enqueuing
549 * frames at this very time on another CPU.
552 skb_queue_purge(&sdata->u.sta.skb_queue);
554 if (local->scan_dev == sdata->dev) {
555 if (!local->ops->hw_scan) {
556 local->sta_sw_scanning = 0;
557 cancel_delayed_work(&local->scan_work);
559 local->sta_hw_scanning = 0;
562 sdata->u.sta.flags &= ~IEEE80211_STA_PRIVACY_INVOKED;
563 kfree(sdata->u.sta.extra_ie);
564 sdata->u.sta.extra_ie = NULL;
565 sdata->u.sta.extra_ie_len = 0;
568 conf.vif = &sdata->vif;
569 conf.type = sdata->vif.type;
570 conf.mac_addr = dev->dev_addr;
571 /* disable all keys for as long as this netdev is down */
572 ieee80211_disable_keys(sdata);
573 local->ops->remove_interface(local_to_hw(local), &conf);
578 if (local->open_count == 0) {
579 if (netif_running(local->mdev))
580 dev_close(local->mdev);
582 if (local->ops->stop)
583 local->ops->stop(local_to_hw(local));
585 ieee80211_led_radio(local, 0);
587 flush_workqueue(local->hw.workqueue);
589 tasklet_disable(&local->tx_pending_tasklet);
590 tasklet_disable(&local->tasklet);
596 int ieee80211_start_tx_ba_session(struct ieee80211_hw *hw, u8 *ra, u16 tid)
598 struct ieee80211_local *local = hw_to_local(hw);
599 struct sta_info *sta;
600 struct ieee80211_sub_if_data *sdata;
601 u16 start_seq_num = 0;
604 DECLARE_MAC_BUF(mac);
606 if (tid >= STA_TID_NUM)
609 #ifdef CONFIG_MAC80211_HT_DEBUG
610 printk(KERN_DEBUG "Open BA session requested for %s tid %u\n",
611 print_mac(mac, ra), tid);
612 #endif /* CONFIG_MAC80211_HT_DEBUG */
616 sta = sta_info_get(local, ra);
618 #ifdef CONFIG_MAC80211_HT_DEBUG
619 printk(KERN_DEBUG "Could not find the station\n");
625 spin_lock_bh(&sta->lock);
627 /* we have tried too many times, receiver does not want A-MPDU */
628 if (sta->ampdu_mlme.addba_req_num[tid] > HT_AGG_MAX_RETRIES) {
633 state = &sta->ampdu_mlme.tid_state_tx[tid];
634 /* check if the TID is not in aggregation flow already */
635 if (*state != HT_AGG_STATE_IDLE) {
636 #ifdef CONFIG_MAC80211_HT_DEBUG
637 printk(KERN_DEBUG "BA request denied - session is not "
638 "idle on tid %u\n", tid);
639 #endif /* CONFIG_MAC80211_HT_DEBUG */
644 /* prepare A-MPDU MLME for Tx aggregation */
645 sta->ampdu_mlme.tid_tx[tid] =
646 kmalloc(sizeof(struct tid_ampdu_tx), GFP_ATOMIC);
647 if (!sta->ampdu_mlme.tid_tx[tid]) {
648 #ifdef CONFIG_MAC80211_HT_DEBUG
650 printk(KERN_ERR "allocate tx mlme to tid %d failed\n",
657 sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.function =
658 sta_addba_resp_timer_expired;
659 sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.data =
660 (unsigned long)&sta->timer_to_tid[tid];
661 init_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
663 /* create a new queue for this aggregation */
664 ret = ieee80211_ht_agg_queue_add(local, sta, tid);
666 /* case no queue is available to aggregation
667 * don't switch to aggregation */
669 #ifdef CONFIG_MAC80211_HT_DEBUG
670 printk(KERN_DEBUG "BA request denied - queue unavailable for"
672 #endif /* CONFIG_MAC80211_HT_DEBUG */
673 goto err_unlock_queue;
677 /* Ok, the Addba frame hasn't been sent yet, but if the driver calls the
678 * call back right away, it must see that the flow has begun */
679 *state |= HT_ADDBA_REQUESTED_MSK;
681 if (local->ops->ampdu_action)
682 ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_START,
683 ra, tid, &start_seq_num);
686 /* No need to requeue the packets in the agg queue, since we
687 * held the tx lock: no packet could be enqueued to the newly
689 ieee80211_ht_agg_queue_remove(local, sta, tid, 0);
690 #ifdef CONFIG_MAC80211_HT_DEBUG
691 printk(KERN_DEBUG "BA request denied - HW unavailable for"
693 #endif /* CONFIG_MAC80211_HT_DEBUG */
694 *state = HT_AGG_STATE_IDLE;
695 goto err_unlock_queue;
698 /* Will put all the packets in the new SW queue */
699 ieee80211_requeue(local, ieee802_1d_to_ac[tid]);
700 spin_unlock_bh(&sta->lock);
702 /* send an addBA request */
703 sta->ampdu_mlme.dialog_token_allocator++;
704 sta->ampdu_mlme.tid_tx[tid]->dialog_token =
705 sta->ampdu_mlme.dialog_token_allocator;
706 sta->ampdu_mlme.tid_tx[tid]->ssn = start_seq_num;
709 ieee80211_send_addba_request(sta->sdata, ra, tid,
710 sta->ampdu_mlme.tid_tx[tid]->dialog_token,
711 sta->ampdu_mlme.tid_tx[tid]->ssn,
713 /* activate the timer for the recipient's addBA response */
714 sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer.expires =
715 jiffies + ADDBA_RESP_INTERVAL;
716 add_timer(&sta->ampdu_mlme.tid_tx[tid]->addba_resp_timer);
717 #ifdef CONFIG_MAC80211_HT_DEBUG
718 printk(KERN_DEBUG "activated addBA response timer on tid %d\n", tid);
723 kfree(sta->ampdu_mlme.tid_tx[tid]);
724 sta->ampdu_mlme.tid_tx[tid] = NULL;
727 spin_unlock_bh(&sta->lock);
732 EXPORT_SYMBOL(ieee80211_start_tx_ba_session);
734 int ieee80211_stop_tx_ba_session(struct ieee80211_hw *hw,
736 enum ieee80211_back_parties initiator)
738 struct ieee80211_local *local = hw_to_local(hw);
739 struct sta_info *sta;
742 DECLARE_MAC_BUF(mac);
744 if (tid >= STA_TID_NUM)
748 sta = sta_info_get(local, ra);
754 /* check if the TID is in aggregation */
755 state = &sta->ampdu_mlme.tid_state_tx[tid];
756 spin_lock_bh(&sta->lock);
758 if (*state != HT_AGG_STATE_OPERATIONAL) {
763 #ifdef CONFIG_MAC80211_HT_DEBUG
764 printk(KERN_DEBUG "Tx BA session stop requested for %s tid %u\n",
765 print_mac(mac, ra), tid);
766 #endif /* CONFIG_MAC80211_HT_DEBUG */
768 ieee80211_stop_queue(hw, sta->tid_to_tx_q[tid]);
770 *state = HT_AGG_STATE_REQ_STOP_BA_MSK |
771 (initiator << HT_AGG_STATE_INITIATOR_SHIFT);
773 if (local->ops->ampdu_action)
774 ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_TX_STOP,
777 /* case HW denied going back to legacy */
779 WARN_ON(ret != -EBUSY);
780 *state = HT_AGG_STATE_OPERATIONAL;
781 ieee80211_wake_queue(hw, sta->tid_to_tx_q[tid]);
786 spin_unlock_bh(&sta->lock);
790 EXPORT_SYMBOL(ieee80211_stop_tx_ba_session);
792 void ieee80211_start_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u16 tid)
794 struct ieee80211_local *local = hw_to_local(hw);
795 struct sta_info *sta;
797 DECLARE_MAC_BUF(mac);
799 if (tid >= STA_TID_NUM) {
800 #ifdef CONFIG_MAC80211_HT_DEBUG
801 printk(KERN_DEBUG "Bad TID value: tid = %d (>= %d)\n",
808 sta = sta_info_get(local, ra);
811 #ifdef CONFIG_MAC80211_HT_DEBUG
812 printk(KERN_DEBUG "Could not find station: %s\n",
818 state = &sta->ampdu_mlme.tid_state_tx[tid];
819 spin_lock_bh(&sta->lock);
821 if (!(*state & HT_ADDBA_REQUESTED_MSK)) {
822 #ifdef CONFIG_MAC80211_HT_DEBUG
823 printk(KERN_DEBUG "addBA was not requested yet, state is %d\n",
826 spin_unlock_bh(&sta->lock);
831 WARN_ON_ONCE(*state & HT_ADDBA_DRV_READY_MSK);
833 *state |= HT_ADDBA_DRV_READY_MSK;
835 if (*state == HT_AGG_STATE_OPERATIONAL) {
836 #ifdef CONFIG_MAC80211_HT_DEBUG
837 printk(KERN_DEBUG "Aggregation is on for tid %d \n", tid);
839 ieee80211_wake_queue(hw, sta->tid_to_tx_q[tid]);
841 spin_unlock_bh(&sta->lock);
844 EXPORT_SYMBOL(ieee80211_start_tx_ba_cb);
846 void ieee80211_stop_tx_ba_cb(struct ieee80211_hw *hw, u8 *ra, u8 tid)
848 struct ieee80211_local *local = hw_to_local(hw);
849 struct sta_info *sta;
852 DECLARE_MAC_BUF(mac);
854 if (tid >= STA_TID_NUM) {
855 #ifdef CONFIG_MAC80211_HT_DEBUG
856 printk(KERN_DEBUG "Bad TID value: tid = %d (>= %d)\n",
862 #ifdef CONFIG_MAC80211_HT_DEBUG
863 printk(KERN_DEBUG "Stopping Tx BA session for %s tid %d\n",
864 print_mac(mac, ra), tid);
865 #endif /* CONFIG_MAC80211_HT_DEBUG */
868 sta = sta_info_get(local, ra);
870 #ifdef CONFIG_MAC80211_HT_DEBUG
871 printk(KERN_DEBUG "Could not find station: %s\n",
877 state = &sta->ampdu_mlme.tid_state_tx[tid];
879 /* NOTE: no need to use sta->lock in this state check, as
880 * ieee80211_stop_tx_ba_session will let only one stop call to
881 * pass through per sta/tid
883 if ((*state & HT_AGG_STATE_REQ_STOP_BA_MSK) == 0) {
884 #ifdef CONFIG_MAC80211_HT_DEBUG
885 printk(KERN_DEBUG "unexpected callback to A-MPDU stop\n");
891 if (*state & HT_AGG_STATE_INITIATOR_MSK)
892 ieee80211_send_delba(sta->sdata, ra, tid,
893 WLAN_BACK_INITIATOR, WLAN_REASON_QSTA_NOT_USE);
895 agg_queue = sta->tid_to_tx_q[tid];
897 ieee80211_ht_agg_queue_remove(local, sta, tid, 1);
899 /* We just requeued the all the frames that were in the
900 * removed queue, and since we might miss a softirq we do
901 * netif_schedule_queue. ieee80211_wake_queue is not used
902 * here as this queue is not necessarily stopped
904 netif_schedule_queue(netdev_get_tx_queue(local->mdev, agg_queue));
905 spin_lock_bh(&sta->lock);
906 *state = HT_AGG_STATE_IDLE;
907 sta->ampdu_mlme.addba_req_num[tid] = 0;
908 kfree(sta->ampdu_mlme.tid_tx[tid]);
909 sta->ampdu_mlme.tid_tx[tid] = NULL;
910 spin_unlock_bh(&sta->lock);
914 EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb);
916 void ieee80211_start_tx_ba_cb_irqsafe(struct ieee80211_hw *hw,
917 const u8 *ra, u16 tid)
919 struct ieee80211_local *local = hw_to_local(hw);
920 struct ieee80211_ra_tid *ra_tid;
921 struct sk_buff *skb = dev_alloc_skb(0);
923 if (unlikely(!skb)) {
924 #ifdef CONFIG_MAC80211_HT_DEBUG
926 printk(KERN_WARNING "%s: Not enough memory, "
927 "dropping start BA session", skb->dev->name);
931 ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
932 memcpy(&ra_tid->ra, ra, ETH_ALEN);
935 skb->pkt_type = IEEE80211_ADDBA_MSG;
936 skb_queue_tail(&local->skb_queue, skb);
937 tasklet_schedule(&local->tasklet);
939 EXPORT_SYMBOL(ieee80211_start_tx_ba_cb_irqsafe);
941 void ieee80211_stop_tx_ba_cb_irqsafe(struct ieee80211_hw *hw,
942 const u8 *ra, u16 tid)
944 struct ieee80211_local *local = hw_to_local(hw);
945 struct ieee80211_ra_tid *ra_tid;
946 struct sk_buff *skb = dev_alloc_skb(0);
948 if (unlikely(!skb)) {
949 #ifdef CONFIG_MAC80211_HT_DEBUG
951 printk(KERN_WARNING "%s: Not enough memory, "
952 "dropping stop BA session", skb->dev->name);
956 ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
957 memcpy(&ra_tid->ra, ra, ETH_ALEN);
960 skb->pkt_type = IEEE80211_DELBA_MSG;
961 skb_queue_tail(&local->skb_queue, skb);
962 tasklet_schedule(&local->tasklet);
964 EXPORT_SYMBOL(ieee80211_stop_tx_ba_cb_irqsafe);
966 static void ieee80211_set_multicast_list(struct net_device *dev)
968 struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
969 struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
970 int allmulti, promisc, sdata_allmulti, sdata_promisc;
972 allmulti = !!(dev->flags & IFF_ALLMULTI);
973 promisc = !!(dev->flags & IFF_PROMISC);
974 sdata_allmulti = !!(sdata->flags & IEEE80211_SDATA_ALLMULTI);
975 sdata_promisc = !!(sdata->flags & IEEE80211_SDATA_PROMISC);
977 if (allmulti != sdata_allmulti) {
978 if (dev->flags & IFF_ALLMULTI)
979 atomic_inc(&local->iff_allmultis);
981 atomic_dec(&local->iff_allmultis);
982 sdata->flags ^= IEEE80211_SDATA_ALLMULTI;
985 if (promisc != sdata_promisc) {
986 if (dev->flags & IFF_PROMISC)
987 atomic_inc(&local->iff_promiscs);
989 atomic_dec(&local->iff_promiscs);
990 sdata->flags ^= IEEE80211_SDATA_PROMISC;
993 dev_mc_sync(local->mdev, dev);
996 static const struct header_ops ieee80211_header_ops = {
997 .create = eth_header,
998 .parse = header_parse_80211,
999 .rebuild = eth_rebuild_header,
1000 .cache = eth_header_cache,
1001 .cache_update = eth_header_cache_update,
1004 void ieee80211_if_setup(struct net_device *dev)
1007 dev->hard_start_xmit = ieee80211_subif_start_xmit;
1008 dev->wireless_handlers = &ieee80211_iw_handler_def;
1009 dev->set_multicast_list = ieee80211_set_multicast_list;
1010 dev->change_mtu = ieee80211_change_mtu;
1011 dev->open = ieee80211_open;
1012 dev->stop = ieee80211_stop;
1013 dev->destructor = free_netdev;
1014 /* we will validate the address ourselves in ->open */
1015 dev->validate_addr = NULL;
1018 /* everything else */
1020 int ieee80211_if_config(struct ieee80211_sub_if_data *sdata, u32 changed)
1022 struct ieee80211_local *local = sdata->local;
1023 struct ieee80211_if_conf conf;
1025 if (WARN_ON(!netif_running(sdata->dev)))
1028 if (!local->ops->config_interface)
1031 memset(&conf, 0, sizeof(conf));
1032 conf.changed = changed;
1034 if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
1035 sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
1036 conf.bssid = sdata->u.sta.bssid;
1037 conf.ssid = sdata->u.sta.ssid;
1038 conf.ssid_len = sdata->u.sta.ssid_len;
1039 } else if (sdata->vif.type == IEEE80211_IF_TYPE_AP) {
1040 conf.bssid = sdata->dev->dev_addr;
1041 conf.ssid = sdata->u.ap.ssid;
1042 conf.ssid_len = sdata->u.ap.ssid_len;
1043 } else if (ieee80211_vif_is_mesh(&sdata->vif)) {
1044 u8 zero[ETH_ALEN] = { 0 };
1053 if (WARN_ON(!conf.bssid && (changed & IEEE80211_IFCC_BSSID)))
1056 if (WARN_ON(!conf.ssid && (changed & IEEE80211_IFCC_SSID)))
1059 return local->ops->config_interface(local_to_hw(local),
1060 &sdata->vif, &conf);
1063 int ieee80211_hw_config(struct ieee80211_local *local)
1065 struct ieee80211_channel *chan;
1068 if (local->sta_sw_scanning)
1069 chan = local->scan_channel;
1071 chan = local->oper_channel;
1073 local->hw.conf.channel = chan;
1075 if (!local->hw.conf.power_level)
1076 local->hw.conf.power_level = chan->max_power;
1078 local->hw.conf.power_level = min(chan->max_power,
1079 local->hw.conf.power_level);
1081 local->hw.conf.max_antenna_gain = chan->max_antenna_gain;
1083 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1084 printk(KERN_DEBUG "%s: HW CONFIG: freq=%d\n",
1085 wiphy_name(local->hw.wiphy), chan->center_freq);
1088 if (local->open_count)
1089 ret = local->ops->config(local_to_hw(local), &local->hw.conf);
1095 * ieee80211_handle_ht should be used only after legacy configuration
1096 * has been determined namely band, as ht configuration depends upon
1097 * the hardware's HT abilities for a _specific_ band.
1099 u32 ieee80211_handle_ht(struct ieee80211_local *local, int enable_ht,
1100 struct ieee80211_ht_info *req_ht_cap,
1101 struct ieee80211_ht_bss_info *req_bss_cap)
1103 struct ieee80211_conf *conf = &local->hw.conf;
1104 struct ieee80211_supported_band *sband;
1105 struct ieee80211_ht_info ht_conf;
1106 struct ieee80211_ht_bss_info ht_bss_conf;
1109 u8 max_tx_streams = IEEE80211_HT_CAP_MAX_STREAMS;
1112 sband = local->hw.wiphy->bands[conf->channel->band];
1114 memset(&ht_conf, 0, sizeof(struct ieee80211_ht_info));
1115 memset(&ht_bss_conf, 0, sizeof(struct ieee80211_ht_bss_info));
1117 /* HT is not supported */
1118 if (!sband->ht_info.ht_supported) {
1119 conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE;
1125 if (conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE)
1126 changed |= BSS_CHANGED_HT;
1127 conf->flags &= ~IEEE80211_CONF_SUPPORT_HT_MODE;
1128 conf->ht_conf.ht_supported = 0;
1133 if (!(conf->flags & IEEE80211_CONF_SUPPORT_HT_MODE))
1134 changed |= BSS_CHANGED_HT;
1136 conf->flags |= IEEE80211_CONF_SUPPORT_HT_MODE;
1137 ht_conf.ht_supported = 1;
1139 ht_conf.cap = req_ht_cap->cap & sband->ht_info.cap;
1140 ht_conf.cap &= ~(IEEE80211_HT_CAP_MIMO_PS);
1141 ht_conf.cap |= sband->ht_info.cap & IEEE80211_HT_CAP_MIMO_PS;
1142 ht_bss_conf.primary_channel = req_bss_cap->primary_channel;
1143 ht_bss_conf.bss_cap = req_bss_cap->bss_cap;
1144 ht_bss_conf.bss_op_mode = req_bss_cap->bss_op_mode;
1146 ht_conf.ampdu_factor = req_ht_cap->ampdu_factor;
1147 ht_conf.ampdu_density = req_ht_cap->ampdu_density;
1150 tx_mcs_set_cap = sband->ht_info.supp_mcs_set[12];
1152 /* configure suppoerted Tx MCS according to requested MCS
1153 * (based in most cases on Rx capabilities of peer) and self
1154 * Tx MCS capabilities (as defined by low level driver HW
1155 * Tx capabilities) */
1156 if (!(tx_mcs_set_cap & IEEE80211_HT_CAP_MCS_TX_DEFINED))
1159 /* Counting from 0 therfore + 1 */
1160 if (tx_mcs_set_cap & IEEE80211_HT_CAP_MCS_TX_RX_DIFF)
1161 max_tx_streams = ((tx_mcs_set_cap &
1162 IEEE80211_HT_CAP_MCS_TX_STREAMS) >> 2) + 1;
1164 for (i = 0; i < max_tx_streams; i++)
1165 ht_conf.supp_mcs_set[i] =
1166 sband->ht_info.supp_mcs_set[i] &
1167 req_ht_cap->supp_mcs_set[i];
1169 if (tx_mcs_set_cap & IEEE80211_HT_CAP_MCS_TX_UEQM)
1170 for (i = IEEE80211_SUPP_MCS_SET_UEQM;
1171 i < IEEE80211_SUPP_MCS_SET_LEN; i++)
1172 ht_conf.supp_mcs_set[i] =
1173 sband->ht_info.supp_mcs_set[i] &
1174 req_ht_cap->supp_mcs_set[i];
1177 /* if bss configuration changed store the new one */
1178 if (memcmp(&conf->ht_conf, &ht_conf, sizeof(ht_conf)) ||
1179 memcmp(&conf->ht_bss_conf, &ht_bss_conf, sizeof(ht_bss_conf))) {
1180 changed |= BSS_CHANGED_HT;
1181 memcpy(&conf->ht_conf, &ht_conf, sizeof(ht_conf));
1182 memcpy(&conf->ht_bss_conf, &ht_bss_conf, sizeof(ht_bss_conf));
1188 void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
1191 struct ieee80211_local *local = sdata->local;
1196 if (local->ops->bss_info_changed)
1197 local->ops->bss_info_changed(local_to_hw(local),
1203 u32 ieee80211_reset_erp_info(struct ieee80211_sub_if_data *sdata)
1205 sdata->bss_conf.use_cts_prot = 0;
1206 sdata->bss_conf.use_short_preamble = 0;
1207 return BSS_CHANGED_ERP_CTS_PROT | BSS_CHANGED_ERP_PREAMBLE;
1210 void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
1211 struct sk_buff *skb)
1213 struct ieee80211_local *local = hw_to_local(hw);
1214 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1217 skb->dev = local->mdev;
1218 skb->pkt_type = IEEE80211_TX_STATUS_MSG;
1219 skb_queue_tail(info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS ?
1220 &local->skb_queue : &local->skb_queue_unreliable, skb);
1221 tmp = skb_queue_len(&local->skb_queue) +
1222 skb_queue_len(&local->skb_queue_unreliable);
1223 while (tmp > IEEE80211_IRQSAFE_QUEUE_LIMIT &&
1224 (skb = skb_dequeue(&local->skb_queue_unreliable))) {
1225 dev_kfree_skb_irq(skb);
1227 I802_DEBUG_INC(local->tx_status_drop);
1229 tasklet_schedule(&local->tasklet);
1231 EXPORT_SYMBOL(ieee80211_tx_status_irqsafe);
1233 static void ieee80211_tasklet_handler(unsigned long data)
1235 struct ieee80211_local *local = (struct ieee80211_local *) data;
1236 struct sk_buff *skb;
1237 struct ieee80211_rx_status rx_status;
1238 struct ieee80211_ra_tid *ra_tid;
1240 while ((skb = skb_dequeue(&local->skb_queue)) ||
1241 (skb = skb_dequeue(&local->skb_queue_unreliable))) {
1242 switch (skb->pkt_type) {
1243 case IEEE80211_RX_MSG:
1244 /* status is in skb->cb */
1245 memcpy(&rx_status, skb->cb, sizeof(rx_status));
1246 /* Clear skb->pkt_type in order to not confuse kernel
1249 __ieee80211_rx(local_to_hw(local), skb, &rx_status);
1251 case IEEE80211_TX_STATUS_MSG:
1253 ieee80211_tx_status(local_to_hw(local), skb);
1255 case IEEE80211_DELBA_MSG:
1256 ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
1257 ieee80211_stop_tx_ba_cb(local_to_hw(local),
1258 ra_tid->ra, ra_tid->tid);
1261 case IEEE80211_ADDBA_MSG:
1262 ra_tid = (struct ieee80211_ra_tid *) &skb->cb;
1263 ieee80211_start_tx_ba_cb(local_to_hw(local),
1264 ra_tid->ra, ra_tid->tid);
1275 /* Remove added headers (e.g., QoS control), encryption header/MIC, etc. to
1276 * make a prepared TX frame (one that has been given to hw) to look like brand
1277 * new IEEE 802.11 frame that is ready to go through TX processing again.
1279 static void ieee80211_remove_tx_extra(struct ieee80211_local *local,
1280 struct ieee80211_key *key,
1281 struct sk_buff *skb)
1283 unsigned int hdrlen, iv_len, mic_len;
1284 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
1286 hdrlen = ieee80211_hdrlen(hdr->frame_control);
1291 switch (key->conf.alg) {
1293 iv_len = WEP_IV_LEN;
1294 mic_len = WEP_ICV_LEN;
1297 iv_len = TKIP_IV_LEN;
1298 mic_len = TKIP_ICV_LEN;
1301 iv_len = CCMP_HDR_LEN;
1302 mic_len = CCMP_MIC_LEN;
1308 if (skb->len >= hdrlen + mic_len &&
1309 !(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE))
1310 skb_trim(skb, skb->len - mic_len);
1311 if (skb->len >= hdrlen + iv_len) {
1312 memmove(skb->data + iv_len, skb->data, hdrlen);
1313 hdr = (struct ieee80211_hdr *)skb_pull(skb, iv_len);
1317 if (ieee80211_is_data_qos(hdr->frame_control)) {
1318 hdr->frame_control &= ~cpu_to_le16(IEEE80211_STYPE_QOS_DATA);
1319 memmove(skb->data + IEEE80211_QOS_CTL_LEN, skb->data,
1320 hdrlen - IEEE80211_QOS_CTL_LEN);
1321 skb_pull(skb, IEEE80211_QOS_CTL_LEN);
1325 static void ieee80211_handle_filtered_frame(struct ieee80211_local *local,
1326 struct sta_info *sta,
1327 struct sk_buff *skb)
1329 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1331 sta->tx_filtered_count++;
1334 * Clear the TX filter mask for this STA when sending the next
1335 * packet. If the STA went to power save mode, this will happen
1336 * when it wakes up for the next time.
1338 set_sta_flags(sta, WLAN_STA_CLEAR_PS_FILT);
1341 * This code races in the following way:
1343 * (1) STA sends frame indicating it will go to sleep and does so
1344 * (2) hardware/firmware adds STA to filter list, passes frame up
1345 * (3) hardware/firmware processes TX fifo and suppresses a frame
1346 * (4) we get TX status before having processed the frame and
1347 * knowing that the STA has gone to sleep.
1349 * This is actually quite unlikely even when both those events are
1350 * processed from interrupts coming in quickly after one another or
1351 * even at the same time because we queue both TX status events and
1352 * RX frames to be processed by a tasklet and process them in the
1353 * same order that they were received or TX status last. Hence, there
1354 * is no race as long as the frame RX is processed before the next TX
1355 * status, which drivers can ensure, see below.
1357 * Note that this can only happen if the hardware or firmware can
1358 * actually add STAs to the filter list, if this is done by the
1359 * driver in response to set_tim() (which will only reduce the race
1360 * this whole filtering tries to solve, not completely solve it)
1361 * this situation cannot happen.
1363 * To completely solve this race drivers need to make sure that they
1364 * (a) don't mix the irq-safe/not irq-safe TX status/RX processing
1366 * (b) always process RX events before TX status events if ordering
1367 * can be unknown, for example with different interrupt status
1370 if (test_sta_flags(sta, WLAN_STA_PS) &&
1371 skb_queue_len(&sta->tx_filtered) < STA_MAX_TX_BUFFER) {
1372 ieee80211_remove_tx_extra(local, sta->key, skb);
1373 skb_queue_tail(&sta->tx_filtered, skb);
1377 if (!test_sta_flags(sta, WLAN_STA_PS) &&
1378 !(info->flags & IEEE80211_TX_CTL_REQUEUE)) {
1379 /* Software retry the packet once */
1380 info->flags |= IEEE80211_TX_CTL_REQUEUE;
1381 ieee80211_remove_tx_extra(local, sta->key, skb);
1382 dev_queue_xmit(skb);
1386 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1387 if (net_ratelimit())
1388 printk(KERN_DEBUG "%s: dropped TX filtered frame, "
1389 "queue_len=%d PS=%d @%lu\n",
1390 wiphy_name(local->hw.wiphy),
1391 skb_queue_len(&sta->tx_filtered),
1392 !!test_sta_flags(sta, WLAN_STA_PS), jiffies);
1397 void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb)
1399 struct sk_buff *skb2;
1400 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
1401 struct ieee80211_local *local = hw_to_local(hw);
1402 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
1405 struct ieee80211_tx_status_rtap_hdr *rthdr;
1406 struct ieee80211_sub_if_data *sdata;
1407 struct net_device *prev_dev = NULL;
1408 struct sta_info *sta;
1412 if (info->status.excessive_retries) {
1413 sta = sta_info_get(local, hdr->addr1);
1415 if (test_sta_flags(sta, WLAN_STA_PS)) {
1417 * The STA is in power save mode, so assume
1418 * that this TX packet failed because of that.
1420 ieee80211_handle_filtered_frame(local, sta, skb);
1427 fc = hdr->frame_control;
1429 if ((info->flags & IEEE80211_TX_STAT_AMPDU_NO_BACK) &&
1430 (ieee80211_is_data_qos(fc))) {
1433 sta = sta_info_get(local, hdr->addr1);
1435 qc = ieee80211_get_qos_ctl(hdr);
1437 ssn = ((le16_to_cpu(hdr->seq_ctrl) + 0x10)
1438 & IEEE80211_SCTL_SEQ);
1439 ieee80211_send_bar(sta->sdata, hdr->addr1,
1444 if (info->flags & IEEE80211_TX_STAT_TX_FILTERED) {
1445 sta = sta_info_get(local, hdr->addr1);
1447 ieee80211_handle_filtered_frame(local, sta, skb);
1452 rate_control_tx_status(local->mdev, skb);
1456 ieee80211_led_tx(local, 0);
1459 * Fragments are passed to low-level drivers as separate skbs, so these
1460 * are actually fragments, not frames. Update frame counters only for
1461 * the first fragment of the frame. */
1463 frag = le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG;
1464 type = le16_to_cpu(hdr->frame_control) & IEEE80211_FCTL_FTYPE;
1466 if (info->flags & IEEE80211_TX_STAT_ACK) {
1468 local->dot11TransmittedFrameCount++;
1469 if (is_multicast_ether_addr(hdr->addr1))
1470 local->dot11MulticastTransmittedFrameCount++;
1471 if (info->status.retry_count > 0)
1472 local->dot11RetryCount++;
1473 if (info->status.retry_count > 1)
1474 local->dot11MultipleRetryCount++;
1477 /* This counter shall be incremented for an acknowledged MPDU
1478 * with an individual address in the address 1 field or an MPDU
1479 * with a multicast address in the address 1 field of type Data
1481 if (!is_multicast_ether_addr(hdr->addr1) ||
1482 type == IEEE80211_FTYPE_DATA ||
1483 type == IEEE80211_FTYPE_MGMT)
1484 local->dot11TransmittedFragmentCount++;
1487 local->dot11FailedCount++;
1490 /* this was a transmitted frame, but now we want to reuse it */
1494 * This is a bit racy but we can avoid a lot of work
1497 if (!local->monitors && !local->cooked_mntrs) {
1502 /* send frame to monitor interfaces now */
1504 if (skb_headroom(skb) < sizeof(*rthdr)) {
1505 printk(KERN_ERR "ieee80211_tx_status: headroom too small\n");
1510 rthdr = (struct ieee80211_tx_status_rtap_hdr *)
1511 skb_push(skb, sizeof(*rthdr));
1513 memset(rthdr, 0, sizeof(*rthdr));
1514 rthdr->hdr.it_len = cpu_to_le16(sizeof(*rthdr));
1515 rthdr->hdr.it_present =
1516 cpu_to_le32((1 << IEEE80211_RADIOTAP_TX_FLAGS) |
1517 (1 << IEEE80211_RADIOTAP_DATA_RETRIES));
1519 if (!(info->flags & IEEE80211_TX_STAT_ACK) &&
1520 !is_multicast_ether_addr(hdr->addr1))
1521 rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_FAIL);
1523 if ((info->flags & IEEE80211_TX_CTL_USE_RTS_CTS) &&
1524 (info->flags & IEEE80211_TX_CTL_USE_CTS_PROTECT))
1525 rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_CTS);
1526 else if (info->flags & IEEE80211_TX_CTL_USE_RTS_CTS)
1527 rthdr->tx_flags |= cpu_to_le16(IEEE80211_RADIOTAP_F_TX_RTS);
1529 rthdr->data_retries = info->status.retry_count;
1531 /* XXX: is this sufficient for BPF? */
1532 skb_set_mac_header(skb, 0);
1533 skb->ip_summed = CHECKSUM_UNNECESSARY;
1534 skb->pkt_type = PACKET_OTHERHOST;
1535 skb->protocol = htons(ETH_P_802_2);
1536 memset(skb->cb, 0, sizeof(skb->cb));
1539 list_for_each_entry_rcu(sdata, &local->interfaces, list) {
1540 if (sdata->vif.type == IEEE80211_IF_TYPE_MNTR) {
1541 if (!netif_running(sdata->dev))
1545 skb2 = skb_clone(skb, GFP_ATOMIC);
1547 skb2->dev = prev_dev;
1552 prev_dev = sdata->dev;
1556 skb->dev = prev_dev;
1563 EXPORT_SYMBOL(ieee80211_tx_status);
1565 struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
1566 const struct ieee80211_ops *ops)
1568 struct ieee80211_local *local;
1570 struct wiphy *wiphy;
1572 /* Ensure 32-byte alignment of our private data and hw private data.
1573 * We use the wiphy priv data for both our ieee80211_local and for
1574 * the driver's private data
1576 * In memory it'll be like this:
1578 * +-------------------------+
1580 * +-------------------------+
1581 * | struct ieee80211_local |
1582 * +-------------------------+
1583 * | driver's private data |
1584 * +-------------------------+
1587 priv_size = ((sizeof(struct ieee80211_local) +
1588 NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST) +
1591 wiphy = wiphy_new(&mac80211_config_ops, priv_size);
1596 wiphy->privid = mac80211_wiphy_privid;
1598 local = wiphy_priv(wiphy);
1599 local->hw.wiphy = wiphy;
1601 local->hw.priv = (char *)local +
1602 ((sizeof(struct ieee80211_local) +
1603 NETDEV_ALIGN_CONST) & ~NETDEV_ALIGN_CONST);
1606 BUG_ON(!ops->start);
1608 BUG_ON(!ops->config);
1609 BUG_ON(!ops->add_interface);
1610 BUG_ON(!ops->remove_interface);
1611 BUG_ON(!ops->configure_filter);
1614 local->hw.queues = 1; /* default */
1616 local->bridge_packets = 1;
1618 local->rts_threshold = IEEE80211_MAX_RTS_THRESHOLD;
1619 local->fragmentation_threshold = IEEE80211_MAX_FRAG_THRESHOLD;
1620 local->short_retry_limit = 7;
1621 local->long_retry_limit = 4;
1622 local->hw.conf.radio_enabled = 1;
1624 INIT_LIST_HEAD(&local->interfaces);
1626 spin_lock_init(&local->key_lock);
1628 INIT_DELAYED_WORK(&local->scan_work, ieee80211_sta_scan_work);
1630 sta_info_init(local);
1632 tasklet_init(&local->tx_pending_tasklet, ieee80211_tx_pending,
1633 (unsigned long)local);
1634 tasklet_disable(&local->tx_pending_tasklet);
1636 tasklet_init(&local->tasklet,
1637 ieee80211_tasklet_handler,
1638 (unsigned long) local);
1639 tasklet_disable(&local->tasklet);
1641 skb_queue_head_init(&local->skb_queue);
1642 skb_queue_head_init(&local->skb_queue_unreliable);
1644 return local_to_hw(local);
1646 EXPORT_SYMBOL(ieee80211_alloc_hw);
1648 int ieee80211_register_hw(struct ieee80211_hw *hw)
1650 struct ieee80211_local *local = hw_to_local(hw);
1653 enum ieee80211_band band;
1654 struct net_device *mdev;
1655 struct wireless_dev *mwdev;
1658 * generic code guarantees at least one band,
1659 * set this very early because much code assumes
1660 * that hw.conf.channel is assigned
1662 for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
1663 struct ieee80211_supported_band *sband;
1665 sband = local->hw.wiphy->bands[band];
1667 /* init channel we're on */
1668 local->hw.conf.channel =
1669 local->oper_channel =
1670 local->scan_channel = &sband->channels[0];
1675 result = wiphy_register(local->hw.wiphy);
1680 * We use the number of queues for feature tests (QoS, HT) internally
1681 * so restrict them appropriately.
1683 if (hw->queues > IEEE80211_MAX_QUEUES)
1684 hw->queues = IEEE80211_MAX_QUEUES;
1685 if (hw->ampdu_queues > IEEE80211_MAX_AMPDU_QUEUES)
1686 hw->ampdu_queues = IEEE80211_MAX_AMPDU_QUEUES;
1688 hw->ampdu_queues = 0;
1690 mdev = alloc_netdev_mq(sizeof(struct wireless_dev),
1691 "wmaster%d", ether_setup,
1692 ieee80211_num_queues(hw));
1694 goto fail_mdev_alloc;
1696 mwdev = netdev_priv(mdev);
1697 mdev->ieee80211_ptr = mwdev;
1698 mwdev->wiphy = local->hw.wiphy;
1702 ieee80211_rx_bss_list_init(local);
1704 mdev->hard_start_xmit = ieee80211_master_start_xmit;
1705 mdev->open = ieee80211_master_open;
1706 mdev->stop = ieee80211_master_stop;
1707 mdev->type = ARPHRD_IEEE80211;
1708 mdev->header_ops = &ieee80211_header_ops;
1709 mdev->set_multicast_list = ieee80211_master_set_multicast_list;
1711 name = wiphy_dev(local->hw.wiphy)->driver->name;
1712 local->hw.workqueue = create_freezeable_workqueue(name);
1713 if (!local->hw.workqueue) {
1715 goto fail_workqueue;
1719 * The hardware needs headroom for sending the frame,
1720 * and we need some headroom for passing the frame to monitor
1721 * interfaces, but never both at the same time.
1723 local->tx_headroom = max_t(unsigned int , local->hw.extra_tx_headroom,
1724 sizeof(struct ieee80211_tx_status_rtap_hdr));
1726 debugfs_hw_add(local);
1728 if (local->hw.conf.beacon_int < 10)
1729 local->hw.conf.beacon_int = 100;
1731 if (local->hw.max_listen_interval == 0)
1732 local->hw.max_listen_interval = 1;
1734 local->hw.conf.listen_interval = local->hw.max_listen_interval;
1736 local->wstats_flags |= local->hw.flags & (IEEE80211_HW_SIGNAL_UNSPEC |
1737 IEEE80211_HW_SIGNAL_DB |
1738 IEEE80211_HW_SIGNAL_DBM) ?
1739 IW_QUAL_QUAL_UPDATED : IW_QUAL_QUAL_INVALID;
1740 local->wstats_flags |= local->hw.flags & IEEE80211_HW_NOISE_DBM ?
1741 IW_QUAL_NOISE_UPDATED : IW_QUAL_NOISE_INVALID;
1742 if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM)
1743 local->wstats_flags |= IW_QUAL_DBM;
1745 result = sta_info_start(local);
1750 result = dev_alloc_name(local->mdev, local->mdev->name);
1754 memcpy(local->mdev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN);
1755 SET_NETDEV_DEV(local->mdev, wiphy_dev(local->hw.wiphy));
1757 result = register_netdevice(local->mdev);
1761 result = ieee80211_init_rate_ctrl_alg(local,
1762 hw->rate_control_algorithm);
1764 printk(KERN_DEBUG "%s: Failed to initialize rate control "
1765 "algorithm\n", wiphy_name(local->hw.wiphy));
1769 result = ieee80211_wep_init(local);
1772 printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
1773 wiphy_name(local->hw.wiphy), result);
1777 local->mdev->select_queue = ieee80211_select_queue;
1779 /* add one default STA interface */
1780 result = ieee80211_if_add(local, "wlan%d", NULL,
1781 IEEE80211_IF_TYPE_STA, NULL);
1783 printk(KERN_WARNING "%s: Failed to add default virtual iface\n",
1784 wiphy_name(local->hw.wiphy));
1788 ieee80211_led_init(local);
1793 rate_control_deinitialize(local);
1795 unregister_netdevice(local->mdev);
1799 sta_info_stop(local);
1801 debugfs_hw_del(local);
1802 destroy_workqueue(local->hw.workqueue);
1805 free_netdev(local->mdev);
1807 wiphy_unregister(local->hw.wiphy);
1810 EXPORT_SYMBOL(ieee80211_register_hw);
1812 void ieee80211_unregister_hw(struct ieee80211_hw *hw)
1814 struct ieee80211_local *local = hw_to_local(hw);
1816 tasklet_kill(&local->tx_pending_tasklet);
1817 tasklet_kill(&local->tasklet);
1822 * At this point, interface list manipulations are fine
1823 * because the driver cannot be handing us frames any
1824 * more and the tasklet is killed.
1827 /* First, we remove all virtual interfaces. */
1828 ieee80211_remove_interfaces(local);
1830 /* then, finally, remove the master interface */
1831 unregister_netdevice(local->mdev);
1835 ieee80211_rx_bss_list_deinit(local);
1836 ieee80211_clear_tx_pending(local);
1837 sta_info_stop(local);
1838 rate_control_deinitialize(local);
1839 debugfs_hw_del(local);
1841 if (skb_queue_len(&local->skb_queue)
1842 || skb_queue_len(&local->skb_queue_unreliable))
1843 printk(KERN_WARNING "%s: skb_queue not empty\n",
1844 wiphy_name(local->hw.wiphy));
1845 skb_queue_purge(&local->skb_queue);
1846 skb_queue_purge(&local->skb_queue_unreliable);
1848 destroy_workqueue(local->hw.workqueue);
1849 wiphy_unregister(local->hw.wiphy);
1850 ieee80211_wep_free(local);
1851 ieee80211_led_exit(local);
1852 free_netdev(local->mdev);
1854 EXPORT_SYMBOL(ieee80211_unregister_hw);
1856 void ieee80211_free_hw(struct ieee80211_hw *hw)
1858 struct ieee80211_local *local = hw_to_local(hw);
1860 wiphy_free(local->hw.wiphy);
1862 EXPORT_SYMBOL(ieee80211_free_hw);
1864 static int __init ieee80211_init(void)
1866 struct sk_buff *skb;
1869 BUILD_BUG_ON(sizeof(struct ieee80211_tx_info) > sizeof(skb->cb));
1870 BUILD_BUG_ON(offsetof(struct ieee80211_tx_info, driver_data) +
1871 IEEE80211_TX_INFO_DRIVER_DATA_SIZE > sizeof(skb->cb));
1873 ret = rc80211_pid_init();
1877 ieee80211_debugfs_netdev_init();
1882 static void __exit ieee80211_exit(void)
1887 * For key todo, it'll be empty by now but the work
1888 * might still be scheduled.
1890 flush_scheduled_work();
1895 ieee80211_debugfs_netdev_exit();
1899 subsys_initcall(ieee80211_init);
1900 module_exit(ieee80211_exit);
1902 MODULE_DESCRIPTION("IEEE 802.11 subsystem");
1903 MODULE_LICENSE("GPL");