Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6

[linux-2.6-omap-h63xx.git] / Documentation / hwmon / smsc47b397

diff --git a/Documentation/hwmon/smsc47b397 b/Documentation/hwmon/smsc47b397
index da9d80c9643286183750fd978aec69ac78e0633b..3a43b694892490b564350cff1169e26e6487d048 100644 (file)
--- a/Documentation/hwmon/smsc47b397
+++ b/Documentation/hwmon/smsc47b397
@@ -3,6 +3,8 @@ Kernel driver smsc47b397
 
 Supported chips:
   * SMSC LPC47B397-NC
 
 Supported chips:
   * SMSC LPC47B397-NC

+  * SMSC SCH5307-NS
+  * SMSC SCH5317

     Prefix: 'smsc47b397'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: In this file
     Prefix: 'smsc47b397'
     Addresses scanned: none, address read from Super I/O config space
     Datasheet: In this file


@@ -12,11 +14,14 @@ Authors: Mark M. Hoffman <mhoffman@lightlink.com>
 
 November 23, 2004
 
 
 November 23, 2004
 

-The following specification describes the SMSC LPC47B397-NC sensor chip
+The following specification describes the SMSC LPC47B397-NC[1] sensor chip

 (for which there is no public datasheet available). This document was
 provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected
 by Mark M. Hoffman <mhoffman@lightlink.com>.
 
 (for which there is no public datasheet available). This document was
 provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected
 by Mark M. Hoffman <mhoffman@lightlink.com>.
 

+[1] And SMSC SCH5307-NS and SCH5317, which have different device IDs but are
+otherwise compatible.
+

 * * * * *
 
 Methods for detecting the HP SIO and reading the thermal data on a dc7100.
 * * * * *
 
 Methods for detecting the HP SIO and reading the thermal data on a dc7100.


@@ -127,7 +132,7 @@ OUT DX,AL
 The registers of interest for identifying the SIO on the dc7100 are Device ID
 (0x20) and Device Rev  (0x21).
 
 The registers of interest for identifying the SIO on the dc7100 are Device ID
 (0x20) and Device Rev  (0x21).
 

-The Device ID will read 0X6F
+The Device ID will read 0x6F (0x81 for SCH5307-NS, and 0x85 for SCH5317)

 The Device Rev currently reads 0x01
 
 Obtaining the HWM Base Address.
 The Device Rev currently reads 0x01
 
 Obtaining the HWM Base Address.