it821x.c: use dev->revision instead of pci_read_config_byte

[linux-2.6-omap-h63xx.git] / drivers / ide / Kconfig

diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index 1a00bb7db87243fa123d96f5ce20334ccb12af3e..3f9503867e6b48da6f8c1e0718399693b5f9020b 100644 (file)
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -62,6 +62,9 @@ config IDE_TIMINGS
 config IDE_ATAPI
        bool
 
 config IDE_ATAPI
        bool
 

+config IDE_LEGACY
+       bool
+

 config BLK_DEV_IDE_SATA
        bool "Support for SATA (deprecated; conflicts with libata SATA driver)"
        default n
 config BLK_DEV_IDE_SATA
        bool "Support for SATA (deprecated; conflicts with libata SATA driver)"
        default n


@@ -134,6 +137,7 @@ config BLK_DEV_DELKIN
 
 config BLK_DEV_IDECD
        tristate "Include IDE/ATAPI CDROM support"
 
 config BLK_DEV_IDECD
        tristate "Include IDE/ATAPI CDROM support"

+       select IDE_ATAPI

        ---help---
          If you have a CD-ROM drive using the ATAPI protocol, say Y. ATAPI is
          a newer protocol used by IDE CD-ROM and TAPE drives, similar to the
        ---help---
          If you have a CD-ROM drive using the ATAPI protocol, say Y. ATAPI is
          a newer protocol used by IDE CD-ROM and TAPE drives, similar to the


@@ -182,23 +186,6 @@ config BLK_DEV_IDETAPE
          To compile this driver as a module, choose M here: the
          module will be called ide-tape.
 
          To compile this driver as a module, choose M here: the
          module will be called ide-tape.
 

-config BLK_DEV_IDESCSI
-       tristate "SCSI emulation support (DEPRECATED)"
-       depends on SCSI
-       select IDE_ATAPI
-       ---help---
-         WARNING: ide-scsi is no longer needed for cd writing applications!
-         The 2.6 kernel supports direct writing to ide-cd, which eliminates
-         the need for ide-scsi + the entire scsi stack just for writing a
-         cd. The new method is more efficient in every way.
-
-         This will provide SCSI host adapter emulation for IDE ATAPI devices,
-         and will allow you to use a SCSI device driver instead of a native
-         ATAPI driver.
-
-         If both this SCSI emulation and native ATAPI support are compiled
-         into the kernel, the native support will be used.
-

 config BLK_DEV_IDEACPI
        bool "IDE ACPI support"
        depends on ACPI
 config BLK_DEV_IDEACPI
        bool "IDE ACPI support"
        depends on ACPI


@@ -524,6 +511,13 @@ config BLK_DEV_PIIX
          This allows the kernel to change PIO, DMA and UDMA speeds and to
          configure the chip to optimum performance.
 
          This allows the kernel to change PIO, DMA and UDMA speeds and to
          configure the chip to optimum performance.
 

+config BLK_DEV_IT8172
+       tristate "IT8172 IDE support"
+       select BLK_DEV_IDEDMA_PCI
+       help
+         This driver adds support for the IDE controller on the
+         IT8172 System Controller.
+

 config BLK_DEV_IT8213
        tristate "IT8213 IDE support"
        select BLK_DEV_IDEDMA_PCI
 config BLK_DEV_IT8213
        tristate "IT8213 IDE support"
        select BLK_DEV_IDEDMA_PCI


@@ -856,6 +850,7 @@ config BLK_DEV_4DRIVES
 config BLK_DEV_ALI14XX
        tristate "ALI M14xx support"
        select IDE_TIMINGS
 config BLK_DEV_ALI14XX
        tristate "ALI M14xx support"
        select IDE_TIMINGS

+       select IDE_LEGACY

        help
          This driver is enabled at runtime using the "ali14xx.probe" kernel
          boot parameter.  It enables support for the secondary IDE interface
        help
          This driver is enabled at runtime using the "ali14xx.probe" kernel
          boot parameter.  It enables support for the secondary IDE interface


@@ -866,6 +861,7 @@ config BLK_DEV_ALI14XX
 
 config BLK_DEV_DTC2278
        tristate "DTC-2278 support"
 
 config BLK_DEV_DTC2278
        tristate "DTC-2278 support"

+       select IDE_LEGACY

        help
          This driver is enabled at runtime using the "dtc2278.probe" kernel
          boot parameter. It enables support for the secondary IDE interface
        help
          This driver is enabled at runtime using the "dtc2278.probe" kernel
          boot parameter. It enables support for the secondary IDE interface


@@ -876,6 +872,7 @@ config BLK_DEV_DTC2278
 config BLK_DEV_HT6560B
        tristate "Holtek HT6560B support"
        select IDE_TIMINGS
 config BLK_DEV_HT6560B
        tristate "Holtek HT6560B support"
        select IDE_TIMINGS

+       select IDE_LEGACY

        help
          This driver is enabled at runtime using the "ht6560b.probe" kernel
          boot parameter. It enables support for the secondary IDE interface
        help
          This driver is enabled at runtime using the "ht6560b.probe" kernel
          boot parameter. It enables support for the secondary IDE interface


@@ -886,6 +883,7 @@ config BLK_DEV_HT6560B
 config BLK_DEV_QD65XX
        tristate "QDI QD65xx support"
        select IDE_TIMINGS
 config BLK_DEV_QD65XX
        tristate "QDI QD65xx support"
        select IDE_TIMINGS

+       select IDE_LEGACY

        help
          This driver is enabled at runtime using the "qd65xx.probe" kernel
          boot parameter.  It permits faster I/O speeds to be set.  See the
        help
          This driver is enabled at runtime using the "qd65xx.probe" kernel
          boot parameter.  It permits faster I/O speeds to be set.  See the


@@ -894,6 +892,7 @@ config BLK_DEV_QD65XX
 
 config BLK_DEV_UMC8672
        tristate "UMC-8672 support"
 
 config BLK_DEV_UMC8672
        tristate "UMC-8672 support"

+       select IDE_LEGACY

        help
          This driver is enabled at runtime using the "umc8672.probe" kernel
          boot parameter. It enables support for the secondary IDE interface
        help
          This driver is enabled at runtime using the "umc8672.probe" kernel
          boot parameter. It enables support for the secondary IDE interface