+/**
+ * enum ieee80211_bss_change - BSS change notification flags
+ *
+ * These flags are used with the bss_info_changed() callback
+ * to indicate which BSS parameter changed.
+ *
+ * @BSS_CHANGED_ASSOC: association status changed (associated/disassociated),
+ * also implies a change in the AID.
+ * @BSS_CHANGED_ERP_CTS_PROT: CTS protection changed
+ * @BSS_CHANGED_ERP_PREAMBLE: preamble changed
+ * @BSS_CHANGED_HT: 802.11n parameters changed
+ */
+enum ieee80211_bss_change {
+ BSS_CHANGED_ASSOC = 1<<0,
+ BSS_CHANGED_ERP_CTS_PROT = 1<<1,
+ BSS_CHANGED_ERP_PREAMBLE = 1<<2,
+ BSS_CHANGED_HT = 1<<4,
+};
+
+/**
+ * struct ieee80211_bss_conf - holds the BSS's changing parameters
+ *
+ * This structure keeps information about a BSS (and an association
+ * to that BSS) that can change during the lifetime of the BSS.
+ *
+ * @assoc: association status
+ * @aid: association ID number, valid only when @assoc is true
+ * @use_cts_prot: use CTS protection
+ * @use_short_preamble: use 802.11b short preamble
+ * @timestamp: beacon timestamp
+ * @beacon_int: beacon interval
+ * @assoc_capability: capabbilities taken from assoc resp
+ * @assoc_ht: association in HT mode
+ * @ht_conf: ht capabilities
+ * @ht_bss_conf: ht extended capabilities
+ */
+struct ieee80211_bss_conf {
+ /* association related data */
+ bool assoc;
+ u16 aid;
+ /* erp related data */
+ bool use_cts_prot;
+ bool use_short_preamble;
+ u16 beacon_int;
+ u16 assoc_capability;
+ u64 timestamp;
+ /* ht related data */
+ bool assoc_ht;
+ struct ieee80211_ht_info *ht_conf;
+ struct ieee80211_ht_bss_info *ht_bss_conf;
+};
+
+/**
+ * enum mac80211_tx_control_flags - flags to describe Tx configuration for
+ * the Tx frame
+ *
+ * These flags are used with the @flags member of &ieee80211_tx_control
+ *
+ * @IEEE80211_TXCTL_REQ_TX_STATUS: request TX status callback for this frame.
+ * @IEEE80211_TXCTL_DO_NOT_ENCRYPT: send this frame without encryption;
+ * e.g., for EAPOL frame
+ * @IEEE80211_TXCTL_USE_RTS_CTS: use RTS-CTS before sending frame
+ * @IEEE80211_TXCTL_USE_CTS_PROTECT: use CTS protection for the frame (e.g.,
+ * for combined 802.11g / 802.11b networks)
+ * @IEEE80211_TXCTL_NO_ACK: tell the low level not to wait for an ack
+ * @IEEE80211_TXCTL_RATE_CTRL_PROBE
+ * @EEE80211_TXCTL_CLEAR_PS_FILT: clear powersave filter
+ * for destination station
+ * @IEEE80211_TXCTL_REQUEUE:
+ * @IEEE80211_TXCTL_FIRST_FRAGMENT: this is a first fragment of the frame
+ * @IEEE80211_TXCTL_LONG_RETRY_LIMIT: this frame should be send using the
+ * through set_retry_limit configured long
+ * retry value
+ * @IEEE80211_TXCTL_EAPOL_FRAME: internal to mac80211
+ * @IEEE80211_TXCTL_SEND_AFTER_DTIM: send this frame after DTIM beacon
+ * @IEEE80211_TXCTL_AMPDU: this frame should be sent as part of an A-MPDU
+ * @IEEE80211_TXCTL_OFDM_HT: this frame can be sent in HT OFDM rates. number
+ * of streams when this flag is on can be extracted
+ * from antenna_sel_tx, so if 1 antenna is marked
+ * use SISO, 2 antennas marked use MIMO, n antennas
+ * marked use MIMO_n.
+ * @IEEE80211_TXCTL_GREEN_FIELD: use green field protection for this frame
+ * @IEEE80211_TXCTL_40_MHZ_WIDTH: send this frame using 40 Mhz channel width
+ * @IEEE80211_TXCTL_DUP_DATA: duplicate data frame on both 20 Mhz channels
+ * @IEEE80211_TXCTL_SHORT_GI: send this frame using short guard interval
+ */
+enum mac80211_tx_control_flags {
+ IEEE80211_TXCTL_REQ_TX_STATUS = (1<<0),
+ IEEE80211_TXCTL_DO_NOT_ENCRYPT = (1<<1),
+ IEEE80211_TXCTL_USE_RTS_CTS = (1<<2),
+ IEEE80211_TXCTL_USE_CTS_PROTECT = (1<<3),
+ IEEE80211_TXCTL_NO_ACK = (1<<4),
+ IEEE80211_TXCTL_RATE_CTRL_PROBE = (1<<5),
+ IEEE80211_TXCTL_CLEAR_PS_FILT = (1<<6),
+ IEEE80211_TXCTL_REQUEUE = (1<<7),
+ IEEE80211_TXCTL_FIRST_FRAGMENT = (1<<8),
+ IEEE80211_TXCTL_SHORT_PREAMBLE = (1<<9),
+ IEEE80211_TXCTL_LONG_RETRY_LIMIT = (1<<10),
+ IEEE80211_TXCTL_EAPOL_FRAME = (1<<11),
+ IEEE80211_TXCTL_SEND_AFTER_DTIM = (1<<12),
+ IEEE80211_TXCTL_AMPDU = (1<<13),
+ IEEE80211_TXCTL_OFDM_HT = (1<<14),
+ IEEE80211_TXCTL_GREEN_FIELD = (1<<15),
+ IEEE80211_TXCTL_40_MHZ_WIDTH = (1<<16),
+ IEEE80211_TXCTL_DUP_DATA = (1<<17),
+ IEEE80211_TXCTL_SHORT_GI = (1<<18),
+};
+