[ALSA] check for linked substreams of different cards

[linux-2.6-omap-h63xx.git] / Documentation / kernel-parameters.txt

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 4881080b338889d6d39ad90be890f9dd4beb23d9..085e4a095eaaec661ae46a61dda993af3c3cb060 100644 (file)
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -68,6 +68,7 @@ parameter is applicable:
        PARIDE  The ParIDE (parallel port IDE) subsystem is enabled.
        PARISC  The PA-RISC architecture is enabled.
        PCI     PCI bus support is enabled.
+       PCIE    PCI Express support is enabled.
        PCMCIA  The PCMCIA subsystem is enabled.
        PNP     Plug & Play support is enabled.
        PPC     PowerPC architecture is enabled.
@@ -1013,6 +1014,10 @@ and is between 256 and 4096 characters. It is defined in the file
        meye.*=         [HW] Set MotionEye Camera parameters
                        See Documentation/video4linux/meye.txt.
 
+       mfgpt_irq=      [IA-32] Specify the IRQ to use for the
+                       Multi-Function General Purpose Timers on AMD Geode
+                       platforms.
+
        mga=            [HW,DRM]
 
        mousedev.tap_time=
@@ -1078,6 +1083,13 @@ and is between 256 and 4096 characters. It is defined in the file
                        [NFS] set the maximum lifetime for idmapper cache
                        entries.
 
+       nfs.enable_ino64=
+                       [NFS] enable 64-bit inode numbers.
+                       If zero, the NFS client will fake up a 32-bit inode
+                       number for the readdir() and stat() syscalls instead
+                       of returning the full 64-bit number.
+                       The default is to return 64-bit inode numbers.
+
        nmi_watchdog=   [KNL,BUGS=X86-32] Debugging features for SMP kernels
 
        no387           [BUGS=X86-32] Tells the kernel to use the 387 maths
@@ -1160,6 +1172,9 @@ and is between 256 and 4096 characters. It is defined in the file
 
        nomce           [X86-32] Machine Check Exception
 
+       nomfgpt         [X86-32] Disable Multi-Function General Purpose
+                       Timer usage (for AMD Geode machines).
+
        noreplace-paravirt      [X86-32,PV_OPS] Don't patch paravirt_ops
 
        noreplace-smp   [X86-32,SMP] Don't replace SMP instructions
@@ -1270,6 +1285,11 @@ and is between 256 and 4096 characters. It is defined in the file
                                Mechanism 1.
                conf2           [X86-32] Force use of PCI Configuration
                                Mechanism 2.
+               noaer           [PCIE] If the PCIEAER kernel config parameter is
+                               enabled, this kernel boot option can be used to
+                               disable the use of PCIE advanced error reporting.
+               nodomains       [PCI] Disable support for multiple PCI
+                               root domains (aka PCI segments, in ACPI-speak).
                nommconf        [X86-32,X86_64] Disable use of MMCONFIG for PCI
                                Configuration
                nomsi           [MSI] If the PCI_MSI kernel config parameter is
@@ -1314,6 +1334,8 @@ and is between 256 and 4096 characters. It is defined in the file
                                IRQ routing is enabled.
                noacpi          [X86-32] Do not use ACPI for IRQ routing
                                or for PCI scanning.
+               use_crs         [X86-32] Use _CRS for PCI resource
+                               allocation.
                routeirq        Do IRQ routing for all PCI devices.
                                This is normally done in pci_enable_device(),
                                so this option is a temporary workaround
@@ -1430,6 +1452,10 @@ and is between 256 and 4096 characters. It is defined in the file
        pt.             [PARIDE]
                        See Documentation/paride.txt.
 
+       pty.legacy_count=
+                       [KNL] Number of legacy pty's. Overwrites compiled-in
+                       default number.
+
        quiet           [KNL] Disable most log messages
 
        r128=           [HW,DRM]
@@ -1864,9 +1890,6 @@ and is between 256 and 4096 characters. It is defined in the file
                        Format:
                        <io>,<irq>,<dma>,<dma2>,<sb_io>,<sb_irq>,<sb_dma>,<mpu_io>,<mpu_irq>
 
-       tsdev.xres=     [TS] Horizontal screen resolution.
-       tsdev.yres=     [TS] Vertical screen resolution.
-
        turbografx.map[2|3]=    [HW,JOY]
                        TurboGraFX parallel port interface
                        Format: