Merge branch 'fb' into devel

[linux-2.6-omap-h63xx.git] / arch / arm / Kconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ab78d5c421fd23a0fa6ba45d760a7b370d5bf2cf..9773a3f730f3fc8b9759bbb337570eba726c86de 100644 (file)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -8,6 +8,7 @@ mainmenu "Linux Kernel Configuration"
 config ARM
        bool
        default y
+       select HAVE_IDE
        select RTC_LIB
        select SYS_SUPPORTS_APM_EMULATION
        select HAVE_OPROFILE
@@ -223,7 +224,6 @@ config ARCH_CLPS7500
        select TIMER_ACORN
        select ISA
        select NO_IOPORT
-       select HAVE_IDE
        help
          Support for the Cirrus Logic PS7500FE system-on-a-chip.
 
@@ -247,13 +247,13 @@ config ARCH_EP93XX
        select ARM_AMBA
        select ARM_VIC
        select GENERIC_GPIO
+       select HAVE_GPIO_LIB
        help
          This enables support for the Cirrus EP93xx series of CPUs.
 
 config ARCH_FOOTBRIDGE
        bool "FootBridge"
        select FOOTBRIDGE
-       select HAVE_IDE
        help
          Support for systems based on the DC21285 companion chip
          ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
@@ -292,7 +292,6 @@ config ARCH_IOP32X
        depends on MMU
        select PLAT_IOP
        select PCI
-       select HAVE_IDE
        help
          Support for Intel's 80219 and IOP32X (XScale) family of
          processors.
@@ -302,14 +301,12 @@ config ARCH_IOP33X
        depends on MMU
        select PLAT_IOP
        select PCI
-       select HAVE_IDE
        help
          Support for Intel's IOP33X (XScale) family of processors.
 
 config ARCH_IXP23XX
        bool "IXP23XX-based"
        depends on MMU
-       select HAVE_IDE
        select PCI
        help
          Support for Intel's IXP23xx (XScale) family of processors.
@@ -327,14 +324,12 @@ config ARCH_IXP4XX
        select GENERIC_GPIO
        select GENERIC_TIME
        select GENERIC_CLOCKEVENTS
-       select HAVE_IDE
        help
          Support for Intel's IXP4XX (XScale) family of processors.
 
 config ARCH_L7200
        bool "LinkUp-L7200"
        select FIQ
-       select HAVE_IDE
        help
          Say Y here if you intend to run this kernel on a LinkUp Systems
          L7200 Software Development Board which uses an ARM720T processor.
@@ -369,15 +364,17 @@ config ARCH_MXC
        help
          Support for Freescale MXC/iMX-based family of processors
 
-config ARCH_ORION
+config ARCH_ORION5X
        bool "Marvell Orion"
        depends on MMU
        select PCI
        select GENERIC_GPIO
        select GENERIC_TIME
        select GENERIC_CLOCKEVENTS
+       select PLAT_ORION
        help
-         Support for Marvell Orion System on Chip family.
+         Support for the following Marvell Orion 5x series SoCs:
+         Orion-1 (5181), Orion-NAS (5182), Orion-2 (5281.)
 
 config ARCH_PNX4008
        bool "Philips Nexperia PNX4008 Mobile"
@@ -389,7 +386,6 @@ config ARCH_PXA
        depends on MMU
        select ARCH_MTD_XIP
        select GENERIC_GPIO
-       select HAVE_IDE
        select HAVE_GPIO_LIB
        select GENERIC_TIME
        select GENERIC_CLOCKEVENTS
@@ -405,7 +401,6 @@ config ARCH_RPC
        select ARCH_MAY_HAVE_PC_FDC
        select ISA_DMA_API
        select NO_IOPORT
-       select HAVE_IDE
        help
          On the Acorn Risc-PC, Linux can support the internal IDE disk and
          CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -414,17 +409,20 @@ config ARCH_SA1100
        bool "SA1100-based"
        select ISA
        select ARCH_DISCONTIGMEM_ENABLE
+       select ARCH_SPARSEMEM_ENABLE
+       select ARCH_SELECT_MEMORY_MODEL
        select ARCH_MTD_XIP
        select GENERIC_GPIO
        select GENERIC_TIME
-       select HAVE_IDE
+       select GENERIC_CLOCKEVENTS
+       select TICK_ONESHOT
+       select HAVE_GPIO_LIB
        help
          Support for StrongARM 11x0 based boards.
 
 config ARCH_S3C2410
        bool "Samsung S3C2410, S3C2412, S3C2413, S3C2440, S3C2442, S3C2443"
        select GENERIC_GPIO
-       select HAVE_IDE
        help
          Samsung S3C2410X CPU based systems, such as the Simtec Electronics
          BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -432,7 +430,6 @@ config ARCH_S3C2410
 
 config ARCH_SHARK
        bool "Shark"
-       select HAVE_IDE
        select ISA
        select ISA_DMA
        select PCI
@@ -442,7 +439,6 @@ config ARCH_SHARK
 
 config ARCH_LH7A40X
        bool "Sharp LH7A40X"
-       select HAVE_IDE
        help
          Say Y here for systems based on one of the Sharp LH7A40X
          System on a Chip processors.  These CPUs include an ARM922T
@@ -460,6 +456,7 @@ config ARCH_DAVINCI
 config ARCH_OMAP
        bool "TI OMAP"
        select GENERIC_GPIO
+       select HAVE_GPIO_LIB
        select GENERIC_TIME
        select GENERIC_CLOCKEVENTS
        help
@@ -508,7 +505,7 @@ source "arch/arm/mach-omap1/Kconfig"
 
 source "arch/arm/mach-omap2/Kconfig"
 
-source "arch/arm/mach-orion/Kconfig"
+source "arch/arm/mach-orion5x/Kconfig"
 
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
@@ -555,6 +552,9 @@ config ARCH_ACORN
 config PLAT_IOP
        bool
 
+config PLAT_ORION
+       bool
+
 source arch/arm/mm/Kconfig
 
 config IWMMXT
@@ -642,7 +642,7 @@ source "kernel/time/Kconfig"
 
 config SMP
        bool "Symmetric Multi-Processing (EXPERIMENTAL)"
-       depends on EXPERIMENTAL && REALVIEW_EB_ARM11MP
+       depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
        help
          This enables support for systems with more than one CPU. If you have
          a system with only one CPU, like most personal computers, say N. If
@@ -675,7 +675,7 @@ config HOTPLUG_CPU
 
 config LOCAL_TIMERS
        bool "Use local timer interrupts"
-       depends on SMP && REALVIEW_EB_ARM11MP
+       depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP)
        default y
        help
          Enable support for local timers on SMP platforms, rather then the
@@ -766,6 +766,12 @@ config ARCH_DISCONTIGMEM_ENABLE
          or have huge holes in the physical address space for other reasons.
          See <file:Documentation/vm/numa> for more.
 
+config ARCH_SPARSEMEM_ENABLE
+       bool
+
+config ARCH_SELECT_MEMORY_MODEL
+       bool
+
 config NODES_SHIFT
        int
        default "4" if ARCH_LH7A40X
@@ -1166,6 +1172,8 @@ source "drivers/dma/Kconfig"
 
 source "drivers/dca/Kconfig"
 
+source "drivers/uio/Kconfig"
+
 endmenu
 
 source "fs/Kconfig"