#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
-#include <asm/procinfo.h>
+#include <asm/elf.h>
#include <asm/pgtable.h>
#include <asm/pgtable-hwdef.h>
#include <asm/page.h>
* - end - virtual end address
*/
ENTRY(xscale_dma_inv_range)
- mrc p15, 0, r2, c0, c0, 0 @ read ID
- eor r2, r2, #0x69000000
- eor r2, r2, #0x00052000
- bics r2, r2, #1
- beq xscale_dma_flush_range
-
tst r0, #CACHELINESIZE - 1
bic r0, r0, #CACHELINESIZE - 1
mcrne p15, 0, r0, c7, c10, 1 @ clean D entry
.long xscale_dma_clean_range
.long xscale_dma_flush_range
+/*
+ * On stepping A0/A1 of the 80200, invalidating D-cache by line doesn't
+ * clear the dirty bits, which means that if we invalidate a dirty line,
+ * the dirty data can still be written back to external memory later on.
+ *
+ * The recommended workaround is to always do a clean D-cache line before
+ * doing an invalidate D-cache line, so on the affected processors,
+ * dma_inv_range() is implemented as dma_flush_range().
+ *
+ * See erratum #25 of "Intel 80200 Processor Specification Update",
+ * revision January 22, 2003, available at:
+ * http://www.intel.com/design/iio/specupdt/273415.htm
+ */
+ENTRY(xscale_80200_A0_A1_cache_fns)
+ .long xscale_flush_kern_cache_all
+ .long xscale_flush_user_cache_all
+ .long xscale_flush_user_cache_range
+ .long xscale_coherent_kern_range
+ .long xscale_coherent_user_range
+ .long xscale_flush_kern_dcache_page
+ .long xscale_dma_flush_range
+ .long xscale_dma_clean_range
+ .long xscale_dma_flush_range
+
ENTRY(cpu_xscale_dcache_clean_area)
1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry
add r0, r0, #CACHELINESIZE
cpwait_ret lr, ip
/*
- * cpu_xscale_set_pte(ptep, pte)
+ * cpu_xscale_set_pte_ext(ptep, pte, ext)
*
* Set a PTE and flush it out
*
* Errata 40: must set memory to write-through for user read-only pages.
*/
.align 5
-ENTRY(cpu_xscale_set_pte)
+ENTRY(cpu_xscale_set_pte_ext)
str r1, [r0], #-2048 @ linux version
bic r2, r1, #0xff0
mcr p15, 0, ip, c7, c7, 0 @ invalidate I, D caches & BTB
mcr p15, 0, ip, c7, c10, 4 @ Drain Write (& Fill) Buffer
mcr p15, 0, ip, c8, c7, 0 @ invalidate I, D TLBs
-#ifdef CONFIG_IWMMXT
- mov r0, #0 @ initially disallow access to CP0/CP1
-#else
- mov r0, #1 @ Allow access to CP0
-#endif
- orr r0, r0, #1 << 6 @ cp6 for IOP3xx and Bulverde
+ mov r0, #1 << 6 @ cp6 for IOP3xx and Bulverde
orr r0, r0, #1 << 13 @ Its undefined whether this
mcr p15, 0, r0, c15, c1, 0 @ affects USR or SVC modes
.word cpu_xscale_do_idle
.word cpu_xscale_dcache_clean_area
.word cpu_xscale_switch_mm
- .word cpu_xscale_set_pte
+ .word cpu_xscale_set_pte_ext
.size xscale_processor_functions, . - xscale_processor_functions
.section ".rodata"
.asciz "v5"
.size cpu_elf_name, . - cpu_elf_name
+ .type cpu_80200_A0_A1_name, #object
+cpu_80200_A0_A1_name:
+ .asciz "XScale-80200 A0/A1"
+ .size cpu_80200_A0_A1_name, . - cpu_80200_A0_A1_name
+
.type cpu_80200_name, #object
cpu_80200_name:
.asciz "XScale-80200"
.size cpu_80200_name, . - cpu_80200_name
+ .type cpu_80219_name, #object
+cpu_80219_name:
+ .asciz "XScale-80219"
+ .size cpu_80219_name, . - cpu_80219_name
+
.type cpu_8032x_name, #object
cpu_8032x_name:
.asciz "XScale-IOP8032x Family"
.section ".proc.info.init", #alloc, #execinstr
+ .type __80200_A0_A1_proc_info,#object
+__80200_A0_A1_proc_info:
+ .long 0x69052000
+ .long 0xfffffffe
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_80200_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_80200_A0_A1_cache_fns
+ .size __80200_A0_A1_proc_info, . - __80200_A0_A1_proc_info
+
.type __80200_proc_info,#object
__80200_proc_info:
.long 0x69052000
.long xscale_cache_fns
.size __80200_proc_info, . - __80200_proc_info
+ .type __80219_proc_info,#object
+__80219_proc_info:
+ .long 0x69052e20
+ .long 0xffffffe0
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_BUFFERABLE | \
+ PMD_SECT_CACHEABLE | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ .long PMD_TYPE_SECT | \
+ PMD_SECT_AP_WRITE | \
+ PMD_SECT_AP_READ
+ b __xscale_setup
+ .long cpu_arch_name
+ .long cpu_elf_name
+ .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+ .long cpu_80219_name
+ .long xscale_processor_functions
+ .long v4wbi_tlb_fns
+ .long xscale_mc_user_fns
+ .long xscale_cache_fns
+ .size __80219_proc_info, . - __80219_proc_info
+
.type __8032x_proc_info,#object
__8032x_proc_info:
.long 0x69052420
- .long 0xfffff5e0 @ mask should accomodate IOP80219 also
+ .long 0xfffff7e0
.long PMD_TYPE_SECT | \
PMD_SECT_BUFFERABLE | \
PMD_SECT_CACHEABLE | \