]> pilppa.org Git - linux-2.6-omap-h63xx.git/blobdiff - arch/blackfin/mach-bf527/boards/ezkit.c
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
[linux-2.6-omap-h63xx.git] / arch / blackfin / mach-bf527 / boards / ezkit.c
index 689b69c98ee44cf95cee6f908b961a8052f636e6..762f754c06ccdcfedae5a8416750cf5d7940195e 100644 (file)
@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
@@ -177,15 +176,15 @@ static struct platform_device bf52x_t350mcqb_device = {
 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
 static struct mtd_partition ezkit_partitions[] = {
        {
-               .name       = "Bootloader",
+               .name       = "bootloader(nor)",
                .size       = 0x40000,
                .offset     = 0,
        }, {
-               .name       = "Kernel",
+               .name       = "linux kernel(nor)",
                .size       = 0x1C0000,
                .offset     = MTDPART_OFS_APPEND,
        }, {
-               .name       = "RootFS",
+               .name       = "file system(nor)",
                .size       = MTDPART_SIZ_FULL,
                .offset     = MTDPART_OFS_APPEND,
        }
@@ -217,12 +216,12 @@ static struct platform_device ezkit_flash_device = {
 #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE)
 static struct mtd_partition partition_info[] = {
        {
-               .name = "Linux Kernel",
+               .name = "linux kernel(nand)",
                .offset = 0,
                .size = 4 * SIZE_1M,
        },
        {
-               .name = "File System",
+               .name = "file system(nand)",
                .offset = MTDPART_OFS_APPEND,
                .size = MTDPART_SIZ_FULL,
        },
@@ -460,12 +459,12 @@ static struct platform_device net2272_bfin_device = {
        || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
        {
-               .name = "bootloader",
+               .name = "bootloader(spi)",
                .size = 0x00040000,
                .offset = 0,
                .mask_flags = MTD_CAP_ROM
        }, {
-               .name = "linux kernel",
+               .name = "linux kernel(spi)",
                .size = MTDPART_SIZ_FULL,
                .offset = MTDPART_OFS_APPEND,
        }
@@ -825,43 +824,6 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT       55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-       .ioport_shift = 1,
-       .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-       {
-               .start = 0x20314020,
-               .end = 0x2031403F,
-               .flags = IORESOURCE_MEM,
-       },
-       {
-               .start = 0x2031401C,
-               .end = 0x2031401F,
-               .flags = IORESOURCE_MEM,
-       },
-       {
-               .start = PATA_INT,
-               .end = PATA_INT,
-               .flags = IORESOURCE_IRQ,
-       },
-};
-
-static struct platform_device bfin_pata_device = {
-       .name = "pata_platform",
-       .id = -1,
-       .num_resources = ARRAY_SIZE(bfin_pata_resources),
-       .resource = bfin_pata_resources,
-       .dev = {
-               .platform_data = &bfin_pata_platform_data,
-       }
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -996,10 +958,6 @@ static struct platform_device *stamp_devices[] __initdata = {
        &bfin_sport1_uart_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-       &bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
        &bfin_device_gpiokeys,
 #endif
@@ -1022,10 +980,6 @@ static int __init stamp_init(void)
 
        platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
        spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-       irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
        return 0;
 }