[PATCH] vmlinux.lds: consolidate initcall sections

[linux-2.6-omap-h63xx.git] / arch / mips / Kconfig

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 30750c54bdf5169564855012899f6e2acb42299d..14af6cce2fa22a57d5c76fa72db3051786ab04d2 100644 (file)
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -203,39 +203,6 @@ config MIPS_EV64120
          <http://www.marvell.com/>.  Say Y here if you wish to build a
          kernel for this platform.
 
-config MIPS_IVR
-       bool "Globespan IVR board"
-       select DMA_NONCOHERENT
-       select HW_HAS_PCI
-       select ITE_BOARD_GEN
-       select SYS_HAS_CPU_NEVADA
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-       help
-         This is an evaluation board built by Globespan to showcase thir
-         iVR (Internet Video Recorder) design. It utilizes a QED RM5231
-         R5000 MIPS core. More information can be found out their website
-         located at <http://www.globespan.net/>. Say Y here if you wish to
-         build a kernel for this platform.
-
-config MIPS_ITE8172
-       bool "ITE 8172G board"
-       select DMA_NONCOHERENT
-       select HW_HAS_PCI
-       select ITE_BOARD_GEN
-       select SYS_HAS_CPU_R5432
-       select SYS_HAS_CPU_NEVADA
-       select SYS_SUPPORTS_32BIT_KERNEL
-       select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL
-       select SYS_SUPPORTS_LITTLE_ENDIAN
-       help
-         Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
-         with ATX form factor that utilizes a MIPS R5000 to work with its
-         ITE8172G companion internet appliance chip. The MIPS core can be
-         either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
-         a kernel for this platform.
-
 config MACH_JAZZ
        bool "Jazz family of machines"
        select ARC
@@ -473,13 +440,11 @@ config MIPS_XXS1500
 
 config PNX8550_V2PCI
        bool "Philips PNX8550 based Viper2-PCI board"
-       depends on BROKEN
        select PNX8550
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
 config PNX8550_JBS
        bool "Philips PNX8550 based JBS board"
-       depends on BROKEN
        select PNX8550
        select SYS_SUPPORTS_LITTLE_ENDIAN
 
@@ -537,6 +502,7 @@ config QEMU
        select SYS_HAS_CPU_MIPS32_R1
        select SYS_SUPPORTS_32BIT_KERNEL
        select SYS_SUPPORTS_BIG_ENDIAN
+       select SYS_SUPPORTS_LITTLE_ENDIAN
        select ARCH_SPARSEMEM_ENABLE
        help
          Qemu is a software emulator which among other architectures also
@@ -803,7 +769,6 @@ endchoice
 source "arch/mips/ddb5xxx/Kconfig"
 source "arch/mips/gt64120/ev64120/Kconfig"
 source "arch/mips/jazz/Kconfig"
-source "arch/mips/ite-boards/Kconfig"
 source "arch/mips/lasat/Kconfig"
 source "arch/mips/momentum/Kconfig"
 source "arch/mips/pmc-sierra/Kconfig"
@@ -836,6 +801,10 @@ config GENERIC_CALIBRATE_DELAY
        bool
        default y
 
+config GENERIC_TIME
+       bool
+       default y
+
 config SCHED_NO_NO_OMIT_FRAME_POINTER
        bool
        default y
@@ -963,9 +932,6 @@ config MIPS_RM9122
 config PCI_MARVELL
        bool
 
-config ITE_BOARD_GEN
-       bool
-
 config SOC_AU1000
        bool
        select SOC_AU1X00
@@ -1044,21 +1010,6 @@ endchoice
 config ARC32
        bool
 
-config AU1X00_USB_DEVICE
-       bool
-       depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
-       default n
-
-config IT8172_CIR
-       bool
-       depends on MIPS_ITE8172 || MIPS_IVR
-       default y
-
-config IT8712
-       bool
-       depends on MIPS_ITE8172
-       default y
-
 config BOOT_ELF32
        bool
 
@@ -1509,10 +1460,8 @@ config MIPS_MT_DISABLED
          the option of an MT-enabled processor this option will be the only
          option in this menu.
 
-config MIPS_MT_SMTC
-       bool "SMTC: Use all TCs on all VPEs for SMP"
-       depends on CPU_MIPS32_R2
-       #depends on CPU_MIPS64_R2               # once there is hardware ...
+config MIPS_MT_SMP
+       bool "Use 1 TC on each available VPE for SMP"
        depends on SYS_SUPPORTS_MULTITHREADING
        select CPU_MIPSR2_IRQ_VI
        select CPU_MIPSR2_SRS
@@ -1520,11 +1469,13 @@ config MIPS_MT_SMTC
        select SMP
        select SYS_SUPPORTS_SMP
        help
-         This is a kernel model which is known a SMTC or lately has been
-         marketesed into SMVP.
+         This is a kernel model which is also known a VSMP or lately
+         has been marketesed into SMVP.
 
-config MIPS_MT_SMP
-       bool "Use 1 TC on each available VPE for SMP"
+config MIPS_MT_SMTC
+       bool "SMTC: Use all TCs on all VPEs for SMP"
+       depends on CPU_MIPS32_R2
+       #depends on CPU_MIPS64_R2               # once there is hardware ...
        depends on SYS_SUPPORTS_MULTITHREADING
        select CPU_MIPSR2_IRQ_VI
        select CPU_MIPSR2_SRS
@@ -1532,8 +1483,8 @@ config MIPS_MT_SMP
        select SMP
        select SYS_SUPPORTS_SMP
        help
-         This is a kernel model which is also known a VSMP or lately
-         has been marketesed into SMVP.
+         This is a kernel model which is known a SMTC or lately has been
+         marketesed into SMVP.
 
 config MIPS_VPE_LOADER
        bool "VPE loader support."
@@ -1841,6 +1792,14 @@ config RWSEM_GENERIC_SPINLOCK
        bool
        default y
 
+config LOCKDEP_SUPPORT
+       bool
+       default y
+
+config STACKTRACE_SUPPORT
+       bool
+       default y
+
 source "init/Kconfig"
 
 menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"