powerpc: Add dma nodes to 83xx, 85xx and 86xx boards

[linux-2.6-omap-h63xx.git] / arch / powerpc / boot / dts / mpc8377_mds.dts

diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index eac8e1b594965dd7e997ac27791faf4dcf06f52e..49a38cb95b527c144f9f4a03ca0f25f9150cc45b 100644 (file)
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -233,6 +233,41 @@
                        interrupt-parent = <&ipic>;
                };
 
+               dma@82a8 {
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
+                       reg = <0x82a8 4>;
+                       ranges = <0 0x8100 0x1a8>;
+                       interrupt-parent = <&ipic>;
+                       interrupts = <0x47 8>;
+                       cell-index = <0>;
+                       dma-channel@0 {
+                               compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+                               reg = <0 0x80>;
+                               interrupt-parent = <&ipic>;
+                               interrupts = <0x47 8>;
+                       };
+                       dma-channel@80 {
+                               compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+                               reg = <0x80 0x80>;
+                               interrupt-parent = <&ipic>;
+                               interrupts = <0x47 8>;
+                       };
+                       dma-channel@100 {
+                               compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+                               reg = <0x100 0x80>;
+                               interrupt-parent = <&ipic>;
+                               interrupts = <0x47 8>;
+                       };
+                       dma-channel@180 {
+                               compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+                               reg = <0x180 0x28>;
+                               interrupt-parent = <&ipic>;
+                               interrupts = <0x47 8>;
+                       };
+               };
+
                crypto@30000 {
                        model = "SEC3";
                        compatible = "talitos";