* bootup setup stuff..
*/
-#include <linux/errno.h>
-#include <linux/sched.h>
#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/stddef.h>
-#include <linux/unistd.h>
-#include <linux/ptrace.h>
#include <linux/slab.h>
-#include <linux/user.h>
-#include <linux/a.out.h>
-#include <linux/tty.h>
-#include <linux/major.h>
#include <linux/interrupt.h>
-#include <linux/reboot.h>
#include <linux/init.h>
-#include <linux/initrd.h>
-#include <linux/ioport.h>
-#include <linux/bootmem.h>
-#include <linux/seq_file.h>
-#include <linux/root_dev.h>
#include <linux/time.h>
#include <linux/rtc.h>
-#include <asm/mmu.h>
-#include <asm/reg.h>
-#include <asm/residual.h>
#include <asm/io.h>
-#include <asm/pgtable.h>
#include <asm/mpc8xx.h>
#include <asm/8xx_immap.h>
-#include <asm/machdep.h>
-#include <asm/bootinfo.h>
-#include <asm/time.h>
#include <asm/prom.h>
#include <asm/fs_pd.h>
#include <mm/mmu_decl.h>
-#include "sysdev/mpc8xx_pic.h"
+#include <sysdev/mpc8xx_pic.h>
+#include <sysdev/commproc.h>
+
+#ifdef CONFIG_PCMCIA_M8XX
+struct mpc8xx_pcmcia_ops m8xx_pcmcia_ops;
+#endif
void m8xx_calibrate_decr(void);
-extern void m8xx_wdt_handler_install(bd_t *bp);
extern int cpm_pic_init(void);
extern int cpm_get_irq(void);
/* A place holder for time base interrupts, if they are ever enabled. */
-irqreturn_t timebase_interrupt(int irq, void * dev)
+static irqreturn_t timebase_interrupt(int irq, void *dev)
{
printk ("timebase_interrupt()\n");
void __init __attribute__ ((weak))
init_internal_rtc(void)
{
- sit8xx_t *sys_tmr = (sit8xx_t *) immr_map(im_sit);
+ sit8xx_t __iomem *sys_tmr = immr_map(im_sit);
/* Disable the RTC one second and alarm interrupts. */
clrbits16(&sys_tmr->sit_rtcsc, (RTCSC_SIE | RTCSC_ALE));
static int __init get_freq(char *name, unsigned long *val)
{
- struct device_node *cpu;
- const unsigned int *fp;
- int found = 0;
+ struct device_node *cpu;
+ const unsigned int *fp;
+ int found = 0;
- /* The cpu node should have timebase and clock frequency properties */
- cpu = of_find_node_by_type(NULL, "cpu");
+ /* The cpu node should have timebase and clock frequency properties */
+ cpu = of_find_node_by_type(NULL, "cpu");
- if (cpu) {
- fp = of_get_property(cpu, name, NULL);
- if (fp) {
- found = 1;
- *val = *fp;
- }
+ if (cpu) {
+ fp = of_get_property(cpu, name, NULL);
+ if (fp) {
+ found = 1;
+ *val = *fp;
+ }
- of_node_put(cpu);
- }
+ of_node_put(cpu);
+ }
- return found;
+ return found;
}
/* The decrementer counts at the system (internal) clock frequency divided by
void __init mpc8xx_calibrate_decr(void)
{
struct device_node *cpu;
- cark8xx_t *clk_r1;
- car8xx_t *clk_r2;
- sitk8xx_t *sys_tmr1;
- sit8xx_t *sys_tmr2;
+ cark8xx_t __iomem *clk_r1;
+ car8xx_t __iomem *clk_r2;
+ sitk8xx_t __iomem *sys_tmr1;
+ sit8xx_t __iomem *sys_tmr2;
int irq, virq;
- clk_r1 = (cark8xx_t *) immr_map(im_clkrstk);
+ clk_r1 = immr_map(im_clkrstk);
/* Unlock the SCCR. */
out_be32(&clk_r1->cark_sccrk, ~KAPWR_KEY);
immr_unmap(clk_r1);
/* Force all 8xx processors to use divide by 16 processor clock. */
- clk_r2 = (car8xx_t *) immr_map(im_clkrst);
+ clk_r2 = immr_map(im_clkrst);
setbits32(&clk_r2->car_sccr, 0x02000000);
immr_unmap(clk_r2);
/* Processor frequency is MHz.
*/
- ppc_tb_freq = 50000000;
- if (!get_freq("bus-frequency", &ppc_tb_freq)) {
- printk(KERN_ERR "WARNING: Estimating decrementer frequency "
- "(not found)\n");
- }
- ppc_tb_freq /= 16;
- ppc_proc_freq = 50000000;
- if (!get_freq("clock-frequency", &ppc_proc_freq))
- printk(KERN_ERR "WARNING: Estimating processor frequency"
- "(not found)\n");
-
- printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq);
+ ppc_tb_freq = 50000000;
+ if (!get_freq("bus-frequency", &ppc_tb_freq)) {
+ printk(KERN_ERR "WARNING: Estimating decrementer frequency "
+ "(not found)\n");
+ }
+ ppc_tb_freq /= 16;
+ ppc_proc_freq = 50000000;
+ if (!get_freq("clock-frequency", &ppc_proc_freq))
+ printk(KERN_ERR "WARNING: Estimating processor frequency "
+ "(not found)\n");
+
+ printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq);
/* Perform some more timer/timebase initialization. This used
* to be done elsewhere, but other changes caused it to get
* we guarantee the registers are locked, then we unlock them
* for our use.
*/
- sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk);
+ sys_tmr1 = immr_map(im_sitk);
out_be32(&sys_tmr1->sitk_tbscrk, ~KAPWR_KEY);
out_be32(&sys_tmr1->sitk_rtcsck, ~KAPWR_KEY);
out_be32(&sys_tmr1->sitk_tbk, ~KAPWR_KEY);
* we have to enable the timebase). The decrementer interrupt
* is wired into the vector table, nothing to do here for that.
*/
- cpu = of_find_node_by_type(NULL, "cpu");
- virq= irq_of_parse_and_map(cpu, 0);
+ cpu = of_find_node_by_type(NULL, "cpu");
+ virq= irq_of_parse_and_map(cpu, 0);
irq = irq_map[virq].hwirq;
- sys_tmr2 = (sit8xx_t *) immr_map(im_sit);
+ sys_tmr2 = immr_map(im_sit);
out_be16(&sys_tmr2->sit_tbscr, ((1 << (7 - (irq/2))) << 8) |
(TBSCR_TBF | TBSCR_TBE));
immr_unmap(sys_tmr2);
if (setup_irq(virq, &tbint_irqaction))
panic("Could not allocate timer IRQ!");
-
-#ifdef CONFIG_8xx_WDT
- /* Install watchdog timer handler early because it might be
- * already enabled by the bootloader
- */
- m8xx_wdt_handler_install(binfo);
-#endif
}
/* The RTC on the MPC8xx is an internal register.
int mpc8xx_set_rtc_time(struct rtc_time *tm)
{
- sitk8xx_t *sys_tmr1;
- sit8xx_t *sys_tmr2;
+ sitk8xx_t __iomem *sys_tmr1;
+ sit8xx_t __iomem *sys_tmr2;
int time;
- sys_tmr1 = (sitk8xx_t *) immr_map(im_sitk);
- sys_tmr2 = (sit8xx_t *) immr_map(im_sit);
+ sys_tmr1 = immr_map(im_sitk);
+ sys_tmr2 = immr_map(im_sit);
time = mktime(tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday,
- tm->tm_hour, tm->tm_min, tm->tm_sec);
+ tm->tm_hour, tm->tm_min, tm->tm_sec);
out_be32(&sys_tmr1->sitk_rtck, KAPWR_KEY);
out_be32(&sys_tmr2->sit_rtc, time);
void mpc8xx_get_rtc_time(struct rtc_time *tm)
{
unsigned long data;
- sit8xx_t *sys_tmr = (sit8xx_t *) immr_map(im_sit);
+ sit8xx_t __iomem *sys_tmr = immr_map(im_sit);
/* Get time from the RTC. */
data = in_be32(&sys_tmr->sit_rtc);
to_tm(data, tm);
- tm->tm_year -= 1900;
- tm->tm_mon -= 1;
+ tm->tm_year -= 1900;
+ tm->tm_mon -= 1;
immr_unmap(sys_tmr);
return;
}
void mpc8xx_restart(char *cmd)
{
- __volatile__ unsigned char dummy;
- car8xx_t * clk_r = (car8xx_t *) immr_map(im_clkrst);
+ car8xx_t __iomem *clk_r = immr_map(im_clkrst);
local_irq_disable();
*/
mtmsr(mfmsr() & ~0x1000);
- dummy = in_8(&clk_r->res[0]);
- printk("Restart failed\n");
- while(1);
-}
-
-void mpc8xx_show_cpuinfo(struct seq_file *m)
-{
- struct device_node *root;
- uint memsize = total_memory;
- const char *model = "";
-
- seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
-
- root = of_find_node_by_path("/");
- if (root)
- model = of_get_property(root, "model", NULL);
- seq_printf(m, "Machine\t\t: %s\n", model);
- of_node_put(root);
-
- seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
+ in_8(&clk_r->res[0]);
+ panic("Restart failed\n");
}
static void cpm_cascade(unsigned int irq, struct irq_desc *desc)
int irq;
if (mpc8xx_pic_init()) {
- printk(KERN_ERR "Failed interrupt 8xx controller initialization\n");
+ printk(KERN_ERR "Failed interrupt 8xx controller initialization\n");
return;
}
projects / linux-2.6-omap-h63xx.git / blobdiff