#include <linux/ptrace.h>
#include <linux/string.h>
#include <linux/slab.h>
+#include <linux/hardirq.h>
#include <linux/preempt.h>
#include <linux/module.h>
#include <linux/kdebug.h>
jop->op = RELATIVEJUMP_INSTRUCTION;
}
+/*
+ * Check for the REX prefix which can only exist on X86_64
+ * X86_32 always returns 0
+ */
+static int __kprobes is_REX_prefix(kprobe_opcode_t *insn)
+{
+#ifdef CONFIG_X86_64
+ if ((*insn & 0xf0) == 0x40)
+ return 1;
+#endif
+ return 0;
+}
+
/*
* Returns non-zero if opcode is boostable.
* RIP relative instructions are adjusted at copying time in 64 bits mode
case 0x9d: /* popf/popfd */
return 1;
}
-#ifdef CONFIG_X86_64
+
/*
- * on 64 bit x86, 0x40-0x4f are prefixes so we need to look
+ * on X86_64, 0x40-0x4f are REX prefixes so we need to look
* at the next byte instead.. but of course not recurse infinitely
*/
- if (*insn >= 0x40 && *insn <= 0x4f)
+ if (is_REX_prefix(insn))
return is_IF_modifier(++insn);
-#endif
+
return 0;
}
-#ifdef CONFIG_X86_64
/*
* Adjust the displacement if the instruction uses the %rip-relative
* addressing mode.
* If it does, Return the address of the 32-bit displacement word.
* If not, return null.
+ * Only applicable to 64-bit x86.
*/
static void __kprobes fix_riprel(struct kprobe *p)
{
+#ifdef CONFIG_X86_64
u8 *insn = p->ainsn.insn;
s64 disp;
int need_modrm;
}
/* Skip REX instruction prefix. */
- if ((*insn & 0xf0) == 0x40)
+ if (is_REX_prefix(insn))
++insn;
if (*insn == 0x0f) {
*(s32 *)insn = (s32) disp;
}
}
-}
#endif
+}
static void __kprobes arch_copy_kprobe(struct kprobe *p)
{
memcpy(p->ainsn.insn, p->addr, MAX_INSN_SIZE * sizeof(kprobe_opcode_t));
-#ifdef CONFIG_X86_64
+
fix_riprel(p);
-#endif
+
if (can_boost(p->addr))
p->ainsn.boostable = 0;
else
static void __kprobes clear_btf(void)
{
if (test_thread_flag(TIF_DEBUGCTLMSR))
- wrmsr(MSR_IA32_DEBUGCTLMSR, 0, 0);
+ wrmsrl(MSR_IA32_DEBUGCTLMSR, 0);
}
static void __kprobes restore_btf(void)
{
if (test_thread_flag(TIF_DEBUGCTLMSR))
- wrmsr(MSR_IA32_DEBUGCTLMSR, current->thread.debugctlmsr, 0);
+ wrmsrl(MSR_IA32_DEBUGCTLMSR, current->thread.debugctlmsr);
}
static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs)
*sara = (unsigned long) &kretprobe_trampoline;
}
+static void __kprobes setup_singlestep(struct kprobe *p, struct pt_regs *regs,
+ struct kprobe_ctlblk *kcb)
+{
+#if !defined(CONFIG_PREEMPT) || defined(CONFIG_PM)
+ if (p->ainsn.boostable == 1 && !p->post_handler) {
+ /* Boost up -- we can execute copied instructions directly */
+ reset_current_kprobe();
+ regs->ip = (unsigned long)p->ainsn.insn;
+ preempt_enable_no_resched();
+ return;
+ }
+#endif
+ prepare_singlestep(p, regs);
+ kcb->kprobe_status = KPROBE_HIT_SS;
+}
+
+/*
+ * We have reentered the kprobe_handler(), since another probe was hit while
+ * within the handler. We save the original kprobes variables and just single
+ * step on the instruction of the new probe without calling any user handlers.
+ */
+static int __kprobes reenter_kprobe(struct kprobe *p, struct pt_regs *regs,
+ struct kprobe_ctlblk *kcb)
+{
+ switch (kcb->kprobe_status) {
+ case KPROBE_HIT_SSDONE:
+#ifdef CONFIG_X86_64
+ /* TODO: Provide re-entrancy from post_kprobes_handler() and
+ * avoid exception stack corruption while single-stepping on
+ * the instruction of the new probe.
+ */
+ arch_disarm_kprobe(p);
+ regs->ip = (unsigned long)p->addr;
+ reset_current_kprobe();
+ preempt_enable_no_resched();
+ break;
+#endif
+ case KPROBE_HIT_ACTIVE:
+ save_previous_kprobe(kcb);
+ set_current_kprobe(p, regs, kcb);
+ kprobes_inc_nmissed_count(p);
+ prepare_singlestep(p, regs);
+ kcb->kprobe_status = KPROBE_REENTER;
+ break;
+ case KPROBE_HIT_SS:
+ if (p == kprobe_running()) {
+ regs->flags &= ~TF_MASK;
+ regs->flags |= kcb->kprobe_saved_flags;
+ return 0;
+ } else {
+ /* A probe has been hit in the codepath leading up
+ * to, or just after, single-stepping of a probed
+ * instruction. This entire codepath should strictly
+ * reside in .kprobes.text section. Raise a warning
+ * to highlight this peculiar case.
+ */
+ }
+ default:
+ /* impossible cases */
+ WARN_ON(1);
+ return 0;
+ }
+
+ return 1;
+}
+
/*
* Interrupts are disabled on entry as trap3 is an interrupt gate and they
* remain disabled thorough out this function.
*/
static int __kprobes kprobe_handler(struct pt_regs *regs)
{
- struct kprobe *p;
- int ret = 0;
kprobe_opcode_t *addr;
+ struct kprobe *p;
struct kprobe_ctlblk *kcb;
addr = (kprobe_opcode_t *)(regs->ip - sizeof(kprobe_opcode_t));
+ if (*addr != BREAKPOINT_INSTRUCTION) {
+ /*
+ * The breakpoint instruction was removed right
+ * after we hit it. Another cpu has removed
+ * either a probepoint or a debugger breakpoint
+ * at this address. In either case, no further
+ * handling of this interrupt is appropriate.
+ * Back up over the (now missing) int3 and run
+ * the original instruction.
+ */
+ regs->ip = (unsigned long)addr;
+ return 1;
+ }
/*
* We don't want to be preempted for the entire
- * duration of kprobe processing
+ * duration of kprobe processing. We conditionally
+ * re-enable preemption at the end of this function,
+ * and also in reenter_kprobe() and setup_singlestep().
*/
preempt_disable();
+
kcb = get_kprobe_ctlblk();
+ p = get_kprobe(addr);
- /* Check we're not actually recursing */
- if (kprobe_running()) {
- p = get_kprobe(addr);
- if (p) {
- if (kcb->kprobe_status == KPROBE_HIT_SS &&
- *p->ainsn.insn == BREAKPOINT_INSTRUCTION) {
- regs->flags &= ~X86_EFLAGS_TF;
- regs->flags |= kcb->kprobe_saved_flags;
- goto no_kprobe;
-#ifdef CONFIG_X86_64
- } else if (kcb->kprobe_status == KPROBE_HIT_SSDONE) {
- /* TODO: Provide re-entrancy from
- * post_kprobes_handler() and avoid exception
- * stack corruption while single-stepping on
- * the instruction of the new probe.
- */
- arch_disarm_kprobe(p);
- regs->ip = (unsigned long)p->addr;
- reset_current_kprobe();
- ret = 1;
- goto no_kprobe;
-#endif
- }
- /* We have reentered the kprobe_handler(), since
- * another probe was hit while within the handler.
- * We here save the original kprobes variables and
- * just single step on the instruction of the new probe
- * without calling any user handlers.
- */
- save_previous_kprobe(kcb);
- set_current_kprobe(p, regs, kcb);
- kprobes_inc_nmissed_count(p);
- prepare_singlestep(p, regs);
- kcb->kprobe_status = KPROBE_REENTER;
- return 1;
+ if (p) {
+ if (kprobe_running()) {
+ if (reenter_kprobe(p, regs, kcb))
+ return 1;
} else {
- if (*addr != BREAKPOINT_INSTRUCTION) {
- /* The breakpoint instruction was removed by
- * another cpu right after we hit, no further
- * handling of this interrupt is appropriate
- */
- regs->ip = (unsigned long)addr;
- ret = 1;
- goto no_kprobe;
- }
- p = __get_cpu_var(current_kprobe);
- if (p->break_handler && p->break_handler(p, regs))
- goto ss_probe;
- }
- goto no_kprobe;
- }
+ set_current_kprobe(p, regs, kcb);
+ kcb->kprobe_status = KPROBE_HIT_ACTIVE;
- p = get_kprobe(addr);
- if (!p) {
- if (*addr != BREAKPOINT_INSTRUCTION) {
/*
- * The breakpoint instruction was removed right
- * after we hit it. Another cpu has removed
- * either a probepoint or a debugger breakpoint
- * at this address. In either case, no further
- * handling of this interrupt is appropriate.
- * Back up over the (now missing) int3 and run
- * the original instruction.
+ * If we have no pre-handler or it returned 0, we
+ * continue with normal processing. If we have a
+ * pre-handler and it returned non-zero, it prepped
+ * for calling the break_handler below on re-entry
+ * for jprobe processing, so get out doing nothing
+ * more here.
*/
- regs->ip = (unsigned long)addr;
- ret = 1;
+ if (!p->pre_handler || !p->pre_handler(p, regs))
+ setup_singlestep(p, regs, kcb);
+ return 1;
}
- /* Not one of ours: let kernel handle it */
- goto no_kprobe;
- }
-
- set_current_kprobe(p, regs, kcb);
- kcb->kprobe_status = KPROBE_HIT_ACTIVE;
-
- if (p->pre_handler && p->pre_handler(p, regs))
- /* handler has already set things up, so skip ss setup */
- return 1;
-
-ss_probe:
-#if !defined(CONFIG_PREEMPT) || defined(CONFIG_PM)
- if (p->ainsn.boostable == 1 && !p->post_handler) {
- /* Boost up -- we can execute copied instructions directly */
- reset_current_kprobe();
- regs->ip = (unsigned long)p->ainsn.insn;
- preempt_enable_no_resched();
- return 1;
- }
-#endif
- prepare_singlestep(p, regs);
- kcb->kprobe_status = KPROBE_HIT_SS;
- return 1;
+ } else if (kprobe_running()) {
+ p = __get_cpu_var(current_kprobe);
+ if (p->break_handler && p->break_handler(p, regs)) {
+ setup_singlestep(p, regs, kcb);
+ return 1;
+ }
+ } /* else: not a kprobe fault; let the kernel handle it */
-no_kprobe:
preempt_enable_no_resched();
- return ret;
+ return 0;
}
/*
* When a retprobed function returns, this code saves registers and
* calls trampoline_handler() runs, which calls the kretprobe's handler.
*/
- void __kprobes kretprobe_trampoline_holder(void)
- {
+void __kprobes kretprobe_trampoline_holder(void)
+{
asm volatile (
".global kretprobe_trampoline\n"
"kretprobe_trampoline: \n"
" popf\n"
#endif
" ret\n");
- }
+}
/*
* Called from kretprobe_trampoline
unsigned long orig_ip = (unsigned long)p->addr;
kprobe_opcode_t *insn = p->ainsn.insn;
-#ifdef CONFIG_X86_64
/*skip the REX prefix*/
- if (*insn >= 0x40 && *insn <= 0x4f)
+ if (is_REX_prefix(insn))
insn++;
-#endif
regs->flags &= ~X86_EFLAGS_TF;
switch (*insn) {
int __kprobes kprobe_exceptions_notify(struct notifier_block *self,
unsigned long val, void *data)
{
- struct die_args *args = (struct die_args *)data;
+ struct die_args *args = data;
int ret = NOTIFY_DONE;
if (args->regs && user_mode_vm(args->regs))
ret = NOTIFY_STOP;
break;
case DIE_GPF:
- /* kprobe_running() needs smp_processor_id() */
- preempt_disable();
- if (kprobe_running() &&
+ /*
+ * To be potentially processing a kprobe fault and to
+ * trust the result from kprobe_running(), we have
+ * be non-preemptible.
+ */
+ if (!preemptible() && kprobe_running() &&
kprobe_fault_handler(args->regs, args->trapnr))
ret = NOTIFY_STOP;
- preempt_enable();
break;
default:
break;