* libata transport template. libata doesn't do real transport stuff.
* It just needs the eh_timed_out hook.
*/
-struct scsi_transport_template ata_scsi_transport_template = {
+static struct scsi_transport_template ata_scsi_transport_template = {
.eh_strategy_handler = ata_scsi_error,
.eh_timed_out = ata_scsi_timed_out,
.user_scan = ata_scsi_user_scan,
scsi_cmd[8] = args[3];
scsi_cmd[10] = args[4];
scsi_cmd[12] = args[5];
- scsi_cmd[13] = args[6] & 0x0f;
+ scsi_cmd[13] = args[6] & 0x4f;
scsi_cmd[14] = args[0];
/* Good values for timeout and retries? Values below
}
}
-#ifdef CONFIG_PM
-/**
- * ata_scsi_device_suspend - suspend ATA device associated with sdev
- * @sdev: the SCSI device to suspend
- * @mesg: target power management message
- *
- * Request suspend EH action on the ATA device associated with
- * @sdev and wait for the operation to complete.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * 0 on success, -errno otherwise.
- */
-int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t mesg)
-{
- struct ata_port *ap = ata_shost_to_port(sdev->host);
- struct ata_device *dev = ata_scsi_find_dev(ap, sdev);
- unsigned long flags;
- unsigned int action;
- int rc = 0;
-
- if (!dev)
- goto out;
-
- spin_lock_irqsave(ap->lock, flags);
-
- /* wait for the previous resume to complete */
- while (dev->flags & ATA_DFLAG_SUSPENDED) {
- spin_unlock_irqrestore(ap->lock, flags);
- ata_port_wait_eh(ap);
- spin_lock_irqsave(ap->lock, flags);
- }
-
- /* if @sdev is already detached, nothing to do */
- if (sdev->sdev_state == SDEV_OFFLINE ||
- sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL)
- goto out_unlock;
-
- /* request suspend */
- action = ATA_EH_SUSPEND;
- if (mesg.event != PM_EVENT_SUSPEND)
- action |= ATA_EH_PM_FREEZE;
- ap->eh_info.dev_action[dev->devno] |= action;
- ap->eh_info.flags |= ATA_EHI_QUIET;
- ata_port_schedule_eh(ap);
-
- spin_unlock_irqrestore(ap->lock, flags);
-
- /* wait for EH to do the job */
- ata_port_wait_eh(ap);
-
- spin_lock_irqsave(ap->lock, flags);
-
- /* If @sdev is still attached but the associated ATA device
- * isn't suspended, the operation failed.
- */
- if (sdev->sdev_state != SDEV_OFFLINE &&
- sdev->sdev_state != SDEV_CANCEL && sdev->sdev_state != SDEV_DEL &&
- !(dev->flags & ATA_DFLAG_SUSPENDED))
- rc = -EIO;
-
- out_unlock:
- spin_unlock_irqrestore(ap->lock, flags);
- out:
- if (rc == 0)
- sdev->sdev_gendev.power.power_state = mesg;
- return rc;
-}
-
-/**
- * ata_scsi_device_resume - resume ATA device associated with sdev
- * @sdev: the SCSI device to resume
- *
- * Request resume EH action on the ATA device associated with
- * @sdev and return immediately. This enables parallel
- * wakeup/spinup of devices.
- *
- * LOCKING:
- * Kernel thread context (may sleep).
- *
- * RETURNS:
- * 0.
- */
-int ata_scsi_device_resume(struct scsi_device *sdev)
-{
- struct ata_port *ap = ata_shost_to_port(sdev->host);
- struct ata_device *dev = ata_scsi_find_dev(ap, sdev);
- struct ata_eh_info *ehi = &ap->eh_info;
- unsigned long flags;
- unsigned int action;
-
- if (!dev)
- goto out;
-
- spin_lock_irqsave(ap->lock, flags);
-
- /* if @sdev is already detached, nothing to do */
- if (sdev->sdev_state == SDEV_OFFLINE ||
- sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL)
- goto out_unlock;
-
- /* request resume */
- action = ATA_EH_RESUME;
- if (sdev->sdev_gendev.power.power_state.event == PM_EVENT_SUSPEND)
- __ata_ehi_hotplugged(ehi);
- else
- action |= ATA_EH_PM_FREEZE | ATA_EH_SOFTRESET;
- ehi->dev_action[dev->devno] |= action;
-
- /* We don't want autopsy and verbose EH messages. Disable
- * those if we're the only device on this link.
- */
- if (ata_port_max_devices(ap) == 1)
- ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
-
- ata_port_schedule_eh(ap);
-
- out_unlock:
- spin_unlock_irqrestore(ap->lock, flags);
- out:
- sdev->sdev_gendev.power.power_state = PMSG_ON;
- return 0;
-}
-#endif /* CONFIG_PM */
-
/**
* ata_to_sense_error - convert ATA error to SCSI error
* @id: ATA device number
blk_queue_max_phys_segments(sdev->request_queue, LIBATA_MAX_PRD);
+ sdev->manage_start_stop = 1;
+
if (dev)
ata_scsi_dev_config(sdev, dev);
return queue_depth;
}
+/* XXX: for spindown warning */
+static void ata_delayed_done_timerfn(unsigned long arg)
+{
+ struct scsi_cmnd *scmd = (void *)arg;
+
+ scmd->scsi_done(scmd);
+}
+
+/* XXX: for spindown warning */
+static void ata_delayed_done(struct scsi_cmnd *scmd)
+{
+ static struct timer_list timer;
+
+ setup_timer(&timer, ata_delayed_done_timerfn, (unsigned long)scmd);
+ mod_timer(&timer, jiffies + 5 * HZ);
+}
+
/**
* ata_scsi_start_stop_xlat - Translate SCSI START STOP UNIT command
* @qc: Storage for translated ATA taskfile
}
tf->command = ATA_CMD_VERIFY; /* READ VERIFY */
- } else
+ } else {
+ /* XXX: This is for backward compatibility, will be
+ * removed. Read Documentation/feature-removal-schedule.txt
+ * for more info.
+ */
+ if ((qc->dev->flags & ATA_DFLAG_SPUNDOWN) &&
+ (system_state == SYSTEM_HALT ||
+ system_state == SYSTEM_POWER_OFF)) {
+ static unsigned long warned = 0;
+
+ if (!test_and_set_bit(0, &warned)) {
+ ata_dev_printk(qc->dev, KERN_WARNING,
+ "DISK MIGHT NOT BE SPUN DOWN PROPERLY. "
+ "UPDATE SHUTDOWN UTILITY\n");
+ ata_dev_printk(qc->dev, KERN_WARNING,
+ "For more info, visit "
+ "http://linux-ata.org/shutdown.html\n");
+
+ /* ->scsi_done is not used, use it for
+ * delayed completion.
+ */
+ scmd->scsi_done = qc->scsidone;
+ qc->scsidone = ata_delayed_done;
+ }
+ scmd->result = SAM_STAT_GOOD;
+ return 1;
+ }
+
/* Issue ATA STANDBY IMMEDIATE command */
tf->command = ATA_CMD_STANDBYNOW1;
+ }
/*
* Standby and Idle condition timers could be implemented but that
static void scsi_6_lba_len(const u8 *cdb, u64 *plba, u32 *plen)
{
u64 lba = 0;
- u32 len = 0;
+ u32 len;
VPRINTK("six-byte command\n");
+ lba |= ((u64)(cdb[1] & 0x1f)) << 16;
lba |= ((u64)cdb[2]) << 8;
lba |= ((u64)cdb[3]);
- len |= ((u32)cdb[4]);
+ len = cdb[4];
*plba = lba;
*plen = len;
}
}
+ /* XXX: track spindown state for spindown skipping and warning */
+ if (unlikely(qc->tf.command == ATA_CMD_STANDBY ||
+ qc->tf.command == ATA_CMD_STANDBYNOW1))
+ qc->dev->flags |= ATA_DFLAG_SPUNDOWN;
+ else if (likely(system_state != SYSTEM_HALT &&
+ system_state != SYSTEM_POWER_OFF))
+ qc->dev->flags &= ~ATA_DFLAG_SPUNDOWN;
+
if (need_sense && !ap->ops->error_handler)
ata_dump_status(ap->print_id, &qc->result_tf);
early_finish:
ata_qc_free(qc);
- done(cmd);
+ qc->scsidone(cmd);
DPRINTK("EXIT - early finish (good or error)\n");
return 0;
err_did:
ata_qc_free(qc);
cmd->result = (DID_ERROR << 16);
- done(cmd);
+ qc->scsidone(cmd);
err_mem:
DPRINTK("EXIT - internal\n");
return 0;
tf->device = qc->dev->devno ?
tf->device | ATA_DEV1 : tf->device & ~ATA_DEV1;
+ /* READ/WRITE LONG use a non-standard sect_size */
+ qc->sect_size = ATA_SECT_SIZE;
+ switch (tf->command) {
+ case ATA_CMD_READ_LONG:
+ case ATA_CMD_READ_LONG_ONCE:
+ case ATA_CMD_WRITE_LONG:
+ case ATA_CMD_WRITE_LONG_ONCE:
+ if (tf->protocol != ATA_PROT_PIO || tf->nsect != 1)
+ goto invalid_fld;
+ qc->sect_size = scmd->request_bufflen;
+ }
+
/*
* Filter SET_FEATURES - XFER MODE command -- otherwise,
* SET_FEATURES - XFER MODE must be preceded/succeeded
{
int rc = 0;
- if (unlikely(!scmd->cmd_len)) {
- ata_dev_printk(dev, KERN_WARNING, "WARNING: zero len CDB\n");
+ if (unlikely(!scmd->cmd_len || scmd->cmd_len > dev->cdb_len)) {
+ DPRINTK("bad CDB len=%u, max=%u\n",
+ scmd->cmd_len, dev->cdb_len);
scmd->result = DID_ERROR << 16;
done(scmd);
return 0;
}
}
+int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht)
+{
+ int i, rc;
+
+ for (i = 0; i < host->n_ports; i++) {
+ struct ata_port *ap = host->ports[i];
+ struct Scsi_Host *shost;
+
+ rc = -ENOMEM;
+ shost = scsi_host_alloc(sht, sizeof(struct ata_port *));
+ if (!shost)
+ goto err_alloc;
+
+ *(struct ata_port **)&shost->hostdata[0] = ap;
+ ap->scsi_host = shost;
+
+ shost->transportt = &ata_scsi_transport_template;
+ shost->unique_id = ap->print_id;
+ shost->max_id = 16;
+ shost->max_lun = 1;
+ shost->max_channel = 1;
+ shost->max_cmd_len = 16;
+
+ rc = scsi_add_host(ap->scsi_host, ap->host->dev);
+ if (rc)
+ goto err_add;
+ }
+
+ return 0;
+
+ err_add:
+ scsi_host_put(host->ports[i]->scsi_host);
+ err_alloc:
+ while (--i >= 0) {
+ struct Scsi_Host *shost = host->ports[i]->scsi_host;
+
+ scsi_remove_host(shost);
+ scsi_host_put(shost);
+ }
+ return rc;
+}
+
void ata_scsi_scan_host(struct ata_port *ap)
{
unsigned int i;
struct ata_port_info *port_info,
struct Scsi_Host *shost)
{
- struct ata_port *ap = kzalloc(sizeof(*ap), GFP_KERNEL);
- struct ata_probe_ent *ent;
+ struct ata_port *ap;
+ ap = ata_port_alloc(host);
if (!ap)
return NULL;
- ent = ata_probe_ent_alloc(host->dev, port_info);
- if (!ent) {
- kfree(ap);
- return NULL;
- }
-
- ata_port_init(ap, host, ent, 0);
+ ap->port_no = 0;
ap->lock = shost->host_lock;
- devm_kfree(host->dev, ent);
+ ap->pio_mask = port_info->pio_mask;
+ ap->mwdma_mask = port_info->mwdma_mask;
+ ap->udma_mask = port_info->udma_mask;
+ ap->flags |= port_info->flags;
+ ap->ops = port_info->port_ops;
+ ap->cbl = ATA_CBL_SATA;
+
return ap;
}
EXPORT_SYMBOL_GPL(ata_sas_port_alloc);
{
int rc = ap->ops->port_start(ap);
- if (!rc)
+ if (!rc) {
+ ap->print_id = ata_print_id++;
rc = ata_bus_probe(ap);
+ }
return rc;
}