static DEFINE_MUTEX(stl_brdslock);
static struct stlbrd *stl_brds[STL_MAXBRDS];
+static const struct tty_port_operations stl_port_ops;
+
/*
* Per board state flags. Used with the state field of the board struct.
* Not really much here!
static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg);
static int stl_brdinit(struct stlbrd *brdp);
-static int stl_getportstats(struct stlport *portp, comstats_t __user *cp);
+static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp);
static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp);
-static int stl_waitcarrier(struct stlport *portp, struct file *filp);
/*
* CD1400 uart specific handling functions.
static void stl_cd_change(struct stlport *portp)
{
unsigned int oldsigs = portp->sigs;
+ struct tty_struct *tty = tty_port_tty_get(&portp->port);
- if (!portp->port.tty)
+ if (!tty)
return;
portp->sigs = stl_getsignals(portp);
if ((oldsigs & TIOCM_CD) && ((portp->sigs & TIOCM_CD) == 0))
if (portp->port.flags & ASYNC_CHECK_CD)
- tty_hangup(portp->port.tty);
+ tty_hangup(tty);
+ tty_kref_put(tty);
}
/*
{
struct stlport *portp;
struct stlbrd *brdp;
+ struct tty_port *port;
unsigned int minordev, brdnr, panelnr;
- int portnr, rc;
+ int portnr;
pr_debug("stl_open(tty=%p,filp=%p): device=%s\n", tty, filp, tty->name);
brdp = stl_brds[brdnr];
if (brdp == NULL)
return -ENODEV;
+
minordev = MINOR2PORT(minordev);
for (portnr = -1, panelnr = 0; panelnr < STL_MAXPANELS; panelnr++) {
if (brdp->panels[panelnr] == NULL)
portp = brdp->panels[panelnr]->ports[portnr];
if (portp == NULL)
return -ENODEV;
+ port = &portp->port;
/*
* On the first open of the device setup the port hardware, and
* initialize the per port data structure.
*/
- portp->port.tty = tty;
+ tty_port_tty_set(port, tty);
tty->driver_data = portp;
- portp->port.count++;
+ port->count++;
- if ((portp->port.flags & ASYNC_INITIALIZED) == 0) {
+ if ((port->flags & ASYNC_INITIALIZED) == 0) {
if (!portp->tx.buf) {
portp->tx.buf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL);
if (!portp->tx.buf)
stl_enablerxtx(portp, 1, 1);
stl_startrxtx(portp, 1, 0);
clear_bit(TTY_IO_ERROR, &tty->flags);
- portp->port.flags |= ASYNC_INITIALIZED;
+ port->flags |= ASYNC_INITIALIZED;
}
-
-/*
- * Check if this port is in the middle of closing. If so then wait
- * until it is closed then return error status, based on flag settings.
- * The sleep here does not need interrupt protection since the wakeup
- * for it is done with the same context.
- */
- if (portp->port.flags & ASYNC_CLOSING) {
- interruptible_sleep_on(&portp->port.close_wait);
- if (portp->port.flags & ASYNC_HUP_NOTIFY)
- return -EAGAIN;
- return -ERESTARTSYS;
- }
-
-/*
- * Based on type of open being done check if it can overlap with any
- * previous opens still in effect. If we are a normal serial device
- * then also we might have to wait for carrier.
- */
- if (!(filp->f_flags & O_NONBLOCK))
- if ((rc = stl_waitcarrier(portp, filp)) != 0)
- return rc;
-
- portp->port.flags |= ASYNC_NORMAL_ACTIVE;
-
- return 0;
+ return tty_port_block_til_ready(port, tty, filp);
}
/*****************************************************************************/
-/*
- * Possibly need to wait for carrier (DCD signal) to come high. Say
- * maybe because if we are clocal then we don't need to wait...
- */
-
-static int stl_waitcarrier(struct stlport *portp, struct file *filp)
+static int stl_carrier_raised(struct tty_port *port)
{
- unsigned long flags;
- int rc, doclocal;
-
- pr_debug("stl_waitcarrier(portp=%p,filp=%p)\n", portp, filp);
-
- rc = 0;
- doclocal = 0;
-
- spin_lock_irqsave(&stallion_lock, flags);
-
- if (portp->port.tty->termios->c_cflag & CLOCAL)
- doclocal++;
-
- portp->openwaitcnt++;
- if (! tty_hung_up_p(filp))
- portp->port.count--;
-
- for (;;) {
- /* Takes brd_lock internally */
- stl_setsignals(portp, 1, 1);
- if (tty_hung_up_p(filp) ||
- ((portp->port.flags & ASYNC_INITIALIZED) == 0)) {
- if (portp->port.flags & ASYNC_HUP_NOTIFY)
- rc = -EBUSY;
- else
- rc = -ERESTARTSYS;
- break;
- }
- if (((portp->port.flags & ASYNC_CLOSING) == 0) &&
- (doclocal || (portp->sigs & TIOCM_CD)))
- break;
- if (signal_pending(current)) {
- rc = -ERESTARTSYS;
- break;
- }
- /* FIXME */
- interruptible_sleep_on(&portp->port.open_wait);
- }
-
- if (! tty_hung_up_p(filp))
- portp->port.count++;
- portp->openwaitcnt--;
- spin_unlock_irqrestore(&stallion_lock, flags);
+ struct stlport *portp = container_of(port, struct stlport, port);
+ return (portp->sigs & TIOCM_CD) ? 1 : 0;
+}
- return rc;
+static void stl_raise_dtr_rts(struct tty_port *port)
+{
+ struct stlport *portp = container_of(port, struct stlport, port);
+ /* Takes brd_lock internally */
+ stl_setsignals(portp, 1, 1);
}
/*****************************************************************************/
pr_debug("stl_flushbuffer(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
pr_debug("stl_waituntilsent(tty=%p,timeout=%d)\n", tty, timeout);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
static void stl_close(struct tty_struct *tty, struct file *filp)
{
struct stlport *portp;
+ struct tty_port *port;
unsigned long flags;
pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp);
portp = tty->driver_data;
- if (portp == NULL)
- return;
-
- spin_lock_irqsave(&stallion_lock, flags);
- if (tty_hung_up_p(filp)) {
- spin_unlock_irqrestore(&stallion_lock, flags);
- return;
- }
- if ((tty->count == 1) && (portp->port.count != 1))
- portp->port.count = 1;
- if (portp->port.count-- > 1) {
- spin_unlock_irqrestore(&stallion_lock, flags);
- return;
- }
+ BUG_ON(portp == NULL);
- portp->port.count = 0;
- portp->port.flags |= ASYNC_CLOSING;
+ port = &portp->port;
+ if (tty_port_close_start(port, tty, filp) == 0)
+ return;
/*
* May want to wait for any data to drain before closing. The BUSY
* flag keeps track of whether we are still sending or not - it is
* very accurate for the cd1400, not quite so for the sc26198.
* (The sc26198 has no "end-of-data" interrupt only empty FIFO)
*/
- tty->closing = 1;
-
- spin_unlock_irqrestore(&stallion_lock, flags);
-
- if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE)
- tty_wait_until_sent(tty, portp->closing_wait);
stl_waituntilsent(tty, (HZ / 2));
-
- spin_lock_irqsave(&stallion_lock, flags);
+ spin_lock_irqsave(&port->lock, flags);
portp->port.flags &= ~ASYNC_INITIALIZED;
- spin_unlock_irqrestore(&stallion_lock, flags);
+ spin_unlock_irqrestore(&port->lock, flags);
stl_disableintrs(portp);
if (tty->termios->c_cflag & HUPCL)
portp->tx.head = NULL;
portp->tx.tail = NULL;
}
- set_bit(TTY_IO_ERROR, &tty->flags);
- tty_ldisc_flush(tty);
-
- tty->closing = 0;
- portp->port.tty = NULL;
- if (portp->openwaitcnt) {
- if (portp->close_delay)
- msleep_interruptible(jiffies_to_msecs(portp->close_delay));
- wake_up_interruptible(&portp->port.open_wait);
- }
-
- portp->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
- wake_up_interruptible(&portp->port.close_wait);
+ tty_port_close_end(port, tty);
+ tty_port_tty_set(port, NULL);
}
/*****************************************************************************/
pr_debug("stl_putchar(tty=%p,ch=%x)\n", tty, ch);
- if (tty == NULL)
- return -EINVAL;
portp = tty->driver_data;
if (portp == NULL)
return -EINVAL;
pr_debug("stl_flushchars(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
pr_debug("stl_writeroom(tty=%p)\n", tty);
- if (tty == NULL)
- return 0;
portp = tty->driver_data;
if (portp == NULL)
return 0;
pr_debug("stl_charsinbuffer(tty=%p)\n", tty);
- if (tty == NULL)
- return 0;
portp = tty->driver_data;
if (portp == NULL)
return 0;
* just quietly ignore any requests to change irq, etc.
*/
-static int stl_setserial(struct stlport *portp, struct serial_struct __user *sp)
+static int stl_setserial(struct tty_struct *tty, struct serial_struct __user *sp)
{
+ struct stlport * portp = tty->driver_data;
struct serial_struct sio;
pr_debug("stl_setserial(portp=%p,sp=%p)\n", portp, sp);
portp->close_delay = sio.close_delay;
portp->closing_wait = sio.closing_wait;
portp->custom_divisor = sio.custom_divisor;
- stl_setport(portp, portp->port.tty->termios);
+ stl_setport(portp, tty->termios);
return 0;
}
{
struct stlport *portp;
- if (tty == NULL)
- return -ENODEV;
portp = tty->driver_data;
if (portp == NULL)
return -ENODEV;
struct stlport *portp;
int rts = -1, dtr = -1;
- if (tty == NULL)
- return -ENODEV;
portp = tty->driver_data;
if (portp == NULL)
return -ENODEV;
pr_debug("stl_ioctl(tty=%p,file=%p,cmd=%x,arg=%lx)\n", tty, file, cmd,
arg);
- if (tty == NULL)
- return -ENODEV;
portp = tty->driver_data;
if (portp == NULL)
return -ENODEV;
rc = stl_getserial(portp, argp);
break;
case TIOCSSERIAL:
- rc = stl_setserial(portp, argp);
+ rc = stl_setserial(tty, argp);
break;
case COM_GETPORTSTATS:
- rc = stl_getportstats(portp, argp);
+ rc = stl_getportstats(tty, portp, argp);
break;
case COM_CLRPORTSTATS:
rc = stl_clrportstats(portp, argp);
pr_debug("stl_start(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
pr_debug("stl_settermios(tty=%p,old=%p)\n", tty, old);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
pr_debug("stl_throttle(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
pr_debug("stl_unthrottle(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
pr_debug("stl_stop(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
static void stl_hangup(struct tty_struct *tty)
{
struct stlport *portp;
+ struct tty_port *port;
+ unsigned long flags;
pr_debug("stl_hangup(tty=%p)\n", tty);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
+ port = &portp->port;
+
+ spin_lock_irqsave(&port->lock, flags);
+ port->flags &= ~ASYNC_INITIALIZED;
+ spin_unlock_irqrestore(&port->lock, flags);
- portp->port.flags &= ~ASYNC_INITIALIZED;
stl_disableintrs(portp);
if (tty->termios->c_cflag & HUPCL)
stl_setsignals(portp, 0, 0);
portp->tx.head = NULL;
portp->tx.tail = NULL;
}
- portp->port.tty = NULL;
- portp->port.flags &= ~ASYNC_NORMAL_ACTIVE;
- portp->port.count = 0;
- wake_up_interruptible(&portp->port.open_wait);
+ tty_port_hangup(port);
}
/*****************************************************************************/
pr_debug("stl_breakctl(tty=%p,state=%d)\n", tty, state);
- if (tty == NULL)
- return -EINVAL;
portp = tty->driver_data;
if (portp == NULL)
return -EINVAL;
pr_debug("stl_sendxchar(tty=%p,ch=%x)\n", tty, ch);
- if (tty == NULL)
- return;
portp = tty->driver_data;
if (portp == NULL)
return;
"(size=%Zd)\n", sizeof(struct stlport));
break;
}
-
+ tty_port_init(&portp->port);
+ portp->port.ops = &stl_port_ops;
portp->magic = STL_PORTMAGIC;
portp->portnr = i;
portp->brdnr = panelp->brdnr;
struct stlpanel *panelp;
struct stlport *portp;
unsigned int j, k;
+ struct tty_struct *tty;
for (j = 0; j < STL_MAXPANELS; j++) {
panelp = brdp->panels[j];
portp = panelp->ports[k];
if (portp == NULL)
continue;
- if (portp->port.tty != NULL)
- stl_hangup(portp->port.tty);
+ tty = tty_port_tty_get(&portp->port);
+ if (tty != NULL) {
+ stl_hangup(tty);
+ tty_kref_put(tty);
+ }
kfree(portp->tx.buf);
kfree(portp);
}
* what port to get stats for (used through board control device).
*/
-static int stl_getportstats(struct stlport *portp, comstats_t __user *cp)
+static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp)
{
comstats_t stl_comstats;
unsigned char *head, *tail;
portp->stats.rxbuffered = 0;
spin_lock_irqsave(&stallion_lock, flags);
- if (portp->port.tty != NULL)
- if (portp->port.tty->driver_data == portp) {
- portp->stats.ttystate = portp->port.tty->flags;
- /* No longer available as a statistic */
- portp->stats.rxbuffered = 1; /*portp->port.tty->flip.count; */
- if (portp->port.tty->termios != NULL) {
- portp->stats.cflags = portp->port.tty->termios->c_cflag;
- portp->stats.iflags = portp->port.tty->termios->c_iflag;
- portp->stats.oflags = portp->port.tty->termios->c_oflag;
- portp->stats.lflags = portp->port.tty->termios->c_lflag;
- }
+ if (tty != NULL && portp->port.tty == tty) {
+ portp->stats.ttystate = tty->flags;
+ /* No longer available as a statistic */
+ portp->stats.rxbuffered = 1; /*tty->flip.count; */
+ if (tty->termios != NULL) {
+ portp->stats.cflags = tty->termios->c_cflag;
+ portp->stats.iflags = tty->termios->c_iflag;
+ portp->stats.oflags = tty->termios->c_oflag;
+ portp->stats.lflags = tty->termios->c_lflag;
}
+ }
spin_unlock_irqrestore(&stallion_lock, flags);
head = portp->tx.head;
switch (cmd) {
case COM_GETPORTSTATS:
- rc = stl_getportstats(NULL, argp);
+ rc = stl_getportstats(NULL, NULL, argp);
break;
case COM_CLRPORTSTATS:
rc = stl_clrportstats(NULL, argp);
.tiocmset = stl_tiocmset,
};
+static const struct tty_port_operations stl_port_ops = {
+ .carrier_raised = stl_carrier_raised,
+ .raise_dtr_rts = stl_raise_dtr_rts,
+};
+
/*****************************************************************************/
/* CD1400 HARDWARE FUNCTIONS */
/*****************************************************************************/
if (portp == NULL)
return;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if (tty == NULL)
return;
BRDDISABLE(portp->brdnr);
spin_unlock_irqrestore(&brd_lock, flags);
+ tty_kref_put(tty);
}
/*****************************************************************************/
if (portp == NULL)
return;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if (tty == NULL)
return;
}
BRDDISABLE(portp->brdnr);
spin_unlock_irqrestore(&brd_lock, flags);
+ tty_kref_put(tty);
}
/*****************************************************************************/
int len, stlen;
char *head, *tail;
unsigned char ioack, srer;
+ struct tty_struct *tty;
pr_debug("stl_cd1400txisr(panelp=%p,ioaddr=%x)\n", panelp, ioaddr);
if ((len == 0) || ((len < STL_TXBUFLOW) &&
(test_bit(ASYI_TXLOW, &portp->istate) == 0))) {
set_bit(ASYI_TXLOW, &portp->istate);
- if (portp->port.tty)
- tty_wakeup(portp->port.tty);
+ tty = tty_port_tty_get(&portp->port);
+ if (tty) {
+ tty_wakeup(tty);
+ tty_kref_put(tty);
+ }
}
if (len == 0) {
return;
}
portp = panelp->ports[(ioack >> 3)];
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if ((ioack & ACK_TYPMASK) == ACK_TYPRXGOOD) {
outb((RDCR + portp->uartaddr), ioaddr);
}
} else {
printk("STALLION: bad RX interrupt ack value=%x\n", ioack);
+ tty_kref_put(tty);
return;
}
stl_rxalldone:
+ tty_kref_put(tty);
outb((EOSRR + portp->uartaddr), ioaddr);
outb(0, (ioaddr + EREG_DATA));
}
if (portp == NULL)
return;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if (tty == NULL)
return;
BRDDISABLE(portp->brdnr);
spin_unlock_irqrestore(&brd_lock, flags);
+ tty_kref_put(tty);
}
/*****************************************************************************/
if (portp == NULL)
return;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
if (tty == NULL)
return;
}
BRDDISABLE(portp->brdnr);
spin_unlock_irqrestore(&brd_lock, flags);
+ tty_kref_put(tty);
}
/*****************************************************************************/
static void stl_sc26198txisr(struct stlport *portp)
{
+ struct tty_struct *tty;
unsigned int ioaddr;
unsigned char mr0;
int len, stlen;
if ((len == 0) || ((len < STL_TXBUFLOW) &&
(test_bit(ASYI_TXLOW, &portp->istate) == 0))) {
set_bit(ASYI_TXLOW, &portp->istate);
- if (portp->port.tty)
- tty_wakeup(portp->port.tty);
+ tty = tty_port_tty_get(&portp->port);
+ if (tty) {
+ tty_wakeup(tty);
+ tty_kref_put(tty);
+ }
}
if (len == 0) {
pr_debug("stl_sc26198rxisr(portp=%p,iack=%x)\n", portp, iack);
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
ioaddr = portp->ioaddr;
outb(GIBCR, (ioaddr + XP_ADDR));
len = inb(ioaddr + XP_DATA) + 1;
stl_sc26198txunflow(portp, tty);
}
}
+ tty_kref_put(tty);
}
/*****************************************************************************/
struct tty_struct *tty;
unsigned int ioaddr;
- tty = portp->port.tty;
+ tty = tty_port_tty_get(&portp->port);
ioaddr = portp->ioaddr;
if (status & SR_RXPARITY)
if (status == 0)
portp->stats.rxtotal++;
}
+ tty_kref_put(tty);
}
/*****************************************************************************/
if (IS_ERR(stallion_class))
printk("STALLION: failed to create class\n");
for (i = 0; i < 4; i++)
- device_create_drvdata(stallion_class, NULL, MKDEV(STL_SIOMEMMAJOR, i),
- NULL, "staliomem%d", i);
+ device_create(stallion_class, NULL, MKDEV(STL_SIOMEMMAJOR, i),
+ NULL, "staliomem%d", i);
return 0;
err_unrtty:
projects / linux-2.6-omap-h63xx.git / blobdiff