int xferlen,
ide_handler_t *handler)
{
- ide_startstop_t startstop;
struct cdrom_info *info = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;
- /* wait for the controller to be idle */
- if (ide_wait_stat(&startstop, drive, 0, BUSY_STAT, WAIT_READY))
- return startstop;
-
/* FIXME: for Virtual DMA we must check harder */
if (info->dma)
info->dma = !hwif->dma_ops->dma_setup(drive);
return ide_started;
}
-/*
- * Block read functions.
- */
-static void ide_cd_pad_transfer(ide_drive_t *drive, xfer_func_t *xf, int len)
-{
- while (len > 0) {
- int dum = 0;
- xf(drive, NULL, &dum, sizeof(dum));
- len -= sizeof(dum);
- }
-}
-
-static void ide_cd_drain_data(ide_drive_t *drive, int nsects)
-{
- while (nsects > 0) {
- static char dum[SECTOR_SIZE];
-
- drive->hwif->input_data(drive, NULL, dum, sizeof(dum));
- nsects--;
- }
-}
-
/*
* Check the contents of the interrupt reason register from the cdrom
* and attempt to recover if there are problems. Returns 0 if everything's
if (ireason == (!rw << 1))
return 0;
else if (ireason == (rw << 1)) {
- ide_hwif_t *hwif = drive->hwif;
- xfer_func_t *xf;
/* whoops... */
printk(KERN_ERR "%s: %s: wrong transfer direction!\n",
drive->name, __func__);
- xf = rw ? hwif->output_data : hwif->input_data;
- ide_cd_pad_transfer(drive, xf, len);
+ ide_pad_transfer(drive, rw, len);
} else if (rw == 0 && ireason == 1) {
/*
* Some drives (ASUS) seem to tell us that status info is
static ide_startstop_t cdrom_newpc_intr(ide_drive_t *);
-/*
- * Routine to send a read/write packet command to the drive. This is usually
- * called directly from cdrom_start_{read,write}(). However, for drq_interrupt
- * devices, it is called from an interrupt when the drive is ready to accept
- * the command.
- */
-static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
+static ide_startstop_t ide_cd_prepare_rw_request(ide_drive_t *drive,
+ struct request *rq)
{
- struct request *rq = HWGROUP(drive)->rq;
-
if (rq_data_dir(rq) == READ) {
unsigned short sectors_per_frame =
queue_hardsect_size(drive->queue) >> SECTOR_BITS;
/* set up the command */
rq->timeout = ATAPI_WAIT_PC;
+ return ide_started;
+}
+
+/*
+ * Routine to send a read/write packet command to the drive. This is usually
+ * called directly from cdrom_start_{read,write}(). However, for drq_interrupt
+ * devices, it is called from an interrupt when the drive is ready to accept
+ * the command.
+ */
+static ide_startstop_t cdrom_start_rw_cont(ide_drive_t *drive)
+{
+ struct request *rq = drive->hwif->hwgroup->rq;
+
/* send the command to the drive and return */
return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
}
return ide_stopped;
}
-static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive)
+static void ide_cd_prepare_seek_request(ide_drive_t *drive, struct request *rq)
{
- struct request *rq = HWGROUP(drive)->rq;
sector_t frame = rq->sector;
sector_div(frame, queue_hardsect_size(drive->queue) >> SECTOR_BITS);
put_unaligned(cpu_to_be32(frame), (unsigned int *) &rq->cmd[2]);
rq->timeout = ATAPI_WAIT_PC;
- return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr);
}
-static ide_startstop_t cdrom_start_seek(ide_drive_t *drive, unsigned int block)
+static ide_startstop_t cdrom_start_seek_continuation(ide_drive_t *drive)
{
- struct cdrom_info *info = drive->driver_data;
+ struct request *rq = drive->hwif->hwgroup->rq;
- info->dma = 0;
- info->start_seek = jiffies;
- return cdrom_start_packet_command(drive, 0,
- cdrom_start_seek_continuation);
+ return cdrom_transfer_packet_command(drive, rq, &cdrom_seek_intr);
}
/*
- bio_cur_sectors(rq->bio),
thislen >> 9);
if (nskip > 0) {
- ide_cd_drain_data(drive, nskip);
+ ide_pad_transfer(drive, write, nskip << 9);
rq->current_nr_sectors -= nskip;
thislen -= (nskip << 9);
}
* If the buffers are full, pipe the rest into
* oblivion.
*/
- ide_cd_drain_data(drive, thislen >> 9);
+ ide_pad_transfer(drive, 0, thislen);
else {
printk(KERN_ERR "%s: confused, missing data\n",
drive->name);
/* pad, if necessary */
if (!blk_fs_request(rq) && len > 0)
- ide_cd_pad_transfer(drive, xferfunc, len);
+ ide_pad_transfer(drive, write, len);
if (blk_pc_request(rq)) {
timeout = rq->timeout;
if (write)
cd->devinfo.media_written = 1;
- /* start sending the read/write request to the drive */
- return cdrom_start_packet_command(drive, 32768, cdrom_start_rw_cont);
+ return ide_started;
}
static ide_startstop_t cdrom_do_newpc_cont(ide_drive_t *drive)
{
struct request *rq = HWGROUP(drive)->rq;
- if (!rq->timeout)
- rq->timeout = ATAPI_WAIT_PC;
-
return cdrom_transfer_packet_command(drive, rq, cdrom_newpc_intr);
}
-static ide_startstop_t cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
+static void cdrom_do_block_pc(ide_drive_t *drive, struct request *rq)
{
struct cdrom_info *info = drive->driver_data;
info->dma = 0;
/* sg request */
- if (rq->bio) {
- int mask = drive->queue->dma_alignment;
- unsigned long addr =
- (unsigned long)page_address(bio_page(rq->bio));
+ if (rq->bio || ((rq->cmd_type == REQ_TYPE_ATA_PC) && rq->data_len)) {
+ struct request_queue *q = drive->queue;
+ unsigned int alignment;
+ unsigned long addr;
+ unsigned long stack_mask = ~(THREAD_SIZE - 1);
+
+ if (rq->bio)
+ addr = (unsigned long)bio_data(rq->bio);
+ else
+ addr = (unsigned long)rq->data;
info->dma = drive->using_dma;
* NOTE! The "len" and "addr" checks should possibly have
* separate masks.
*/
- if ((rq->data_len & 15) || (addr & mask))
+ alignment = queue_dma_alignment(q) | q->dma_pad_mask;
+ if (addr & alignment || rq->data_len & alignment)
info->dma = 0;
- }
- /* start sending the command to the drive */
- return cdrom_start_packet_command(drive, rq->data_len,
- cdrom_do_newpc_cont);
+ if (!((addr & stack_mask) ^
+ ((unsigned long)current->stack & stack_mask)))
+ info->dma = 0;
+ }
}
/*
* cdrom driver request routine.
*/
-static ide_startstop_t ide_do_rw_cdrom(ide_drive_t *drive, struct request *rq,
+static ide_startstop_t ide_cd_do_request(ide_drive_t *drive, struct request *rq,
sector_t block)
{
- ide_startstop_t action;
struct cdrom_info *info = drive->driver_data;
+ ide_handler_t *fn;
+ int xferlen;
if (blk_fs_request(rq)) {
if (info->cd_flags & IDE_CD_FLAG_SEEKING) {
}
if (rq_data_dir(rq) == READ &&
IDE_LARGE_SEEK(info->last_block, block,
- IDECD_SEEK_THRESHOLD) &&
- drive->dsc_overlap)
- action = cdrom_start_seek(drive, block);
- else
- action = cdrom_start_rw(drive, rq);
+ IDECD_SEEK_THRESHOLD) &&
+ drive->dsc_overlap) {
+ xferlen = 0;
+ fn = cdrom_start_seek_continuation;
+
+ info->dma = 0;
+ info->start_seek = jiffies;
+
+ ide_cd_prepare_seek_request(drive, rq);
+ } else {
+ xferlen = 32768;
+ fn = cdrom_start_rw_cont;
+
+ if (cdrom_start_rw(drive, rq) == ide_stopped)
+ return ide_stopped;
+
+ if (ide_cd_prepare_rw_request(drive, rq) == ide_stopped)
+ return ide_stopped;
+ }
info->last_block = block;
- return action;
} else if (blk_sense_request(rq) || blk_pc_request(rq) ||
rq->cmd_type == REQ_TYPE_ATA_PC) {
- return cdrom_do_block_pc(drive, rq);
+ xferlen = rq->data_len;
+ fn = cdrom_do_newpc_cont;
+
+ if (!rq->timeout)
+ rq->timeout = ATAPI_WAIT_PC;
+
+ cdrom_do_block_pc(drive, rq);
} else if (blk_special_request(rq)) {
/* right now this can only be a reset... */
cdrom_end_request(drive, 1);
return ide_stopped;
+ } else {
+ blk_dump_rq_flags(rq, "ide-cd bad flags");
+ cdrom_end_request(drive, 0);
+ return ide_stopped;
}
- blk_dump_rq_flags(rq, "ide-cd bad flags");
- cdrom_end_request(drive, 0);
- return ide_stopped;
+ return cdrom_start_packet_command(drive, xferlen, fn);
}
-
-
/*
* Ioctl handling.
*
blk_queue_prep_rq(drive->queue, ide_cdrom_prep_fn);
blk_queue_dma_alignment(drive->queue, 31);
+ blk_queue_update_dma_pad(drive->queue, 15);
drive->queue->unplug_delay = (1 * HZ) / 1000;
if (!drive->queue->unplug_delay)
drive->queue->unplug_delay = 1;
.version = IDECD_VERSION,
.media = ide_cdrom,
.supports_dsc_overlap = 1,
- .do_request = ide_do_rw_cdrom,
+ .do_request = ide_cd_do_request,
.end_request = ide_end_request,
.error = __ide_error,
- .abort = __ide_abort,
#ifdef CONFIG_IDE_PROC_FS
.proc = idecd_proc,
#endif
projects / linux-2.6-omap-h63xx.git / blobdiff