/*
- * linux/drivers/ide/pci/cs5530.c Version 0.74 Jul 28 2007
+ * linux/drivers/ide/pci/cs5530.c Version 0.76 Aug 3 2007
*
* Copyright (C) 2000 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2000 Mark Lord <mlord@pobox.com>
#include <asm/io.h>
#include <asm/irq.h>
-/**
- * cs5530_xfer_set_mode - set a new transfer mode at the drive
- * @drive: drive to tune
- * @mode: new mode
- *
- * Logging wrapper to the IDE driver speed configuration. This can
- * probably go away now.
- */
-
-static int cs5530_set_xfer_mode (ide_drive_t *drive, u8 mode)
-{
- printk(KERN_DEBUG "%s: cs5530_set_xfer_mode(%s)\n",
- drive->name, ide_xfer_verbose(mode));
- return (ide_config_drive_speed(drive, mode));
-}
-
/*
* Here are the standard PIO mode 0-4 timings for each "format".
* Format-0 uses fast data reg timings, with slower command reg timings.
#define CS5530_BAD_PIO(timings) (((timings)&~0x80000000)==0x0000e132)
#define CS5530_BASEREG(hwif) (((hwif)->dma_base & ~0xf) + ((hwif)->channel ? 0x30 : 0x20))
-static void cs5530_tunepio(ide_drive_t *drive, u8 pio)
-{
- unsigned long basereg = CS5530_BASEREG(drive->hwif);
- unsigned int format = (inl(basereg + 4) >> 31) & 1;
-
- outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3));
-}
-
/**
- * cs5530_tuneproc - select/set PIO modes
+ * cs5530_set_pio_mode - set host controller for PIO mode
+ * @drive: drive
+ * @pio: PIO mode number
*
- * cs5530_tuneproc() handles selection/setting of PIO modes
- * for both the chipset and drive.
+ * Handles setting of PIO mode for the chipset.
*
- * The ide_init_cs5530() routine guarantees that all drives
+ * The init_hwif_cs5530() routine guarantees that all drives
* will have valid default PIO timings set up before we get here.
*/
-static void cs5530_tuneproc (ide_drive_t *drive, u8 pio) /* pio=255 means "autotune" */
+static void cs5530_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- pio = ide_get_best_pio_mode(drive, pio, 4);
+ unsigned long basereg = CS5530_BASEREG(drive->hwif);
+ unsigned int format = (inl(basereg + 4) >> 31) & 1;
- if (cs5530_set_xfer_mode(drive, XFER_PIO_0 + pio) == 0)
- cs5530_tunepio(drive, pio);
+ outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3));
}
/**
return mask;
}
-/**
- * cs5530_config_dma - set DMA/UDMA mode
- * @drive: drive to tune
- *
- * cs5530_config_dma() handles setting of DMA/UDMA mode
- * for both the chipset and drive.
- */
-
-static int cs5530_config_dma(ide_drive_t *drive)
-{
- if (ide_tune_dma(drive))
- return 0;
-
- return 1;
-}
-
-static int cs5530_tune_chipset(ide_drive_t *drive, u8 mode)
+static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode)
{
unsigned long basereg;
unsigned int reg, timings = 0;
- mode = ide_rate_filter(drive, mode);
-
- /*
- * Tell the drive to switch to the new mode; abort on failure.
- */
- if (cs5530_set_xfer_mode(drive, mode))
- return 1; /* failure */
-
- /*
- * Now tune the chipset to match the drive:
- */
switch (mode) {
case XFER_UDMA_0: timings = 0x00921250; break;
case XFER_UDMA_1: timings = 0x00911140; break;
case XFER_MW_DMA_0: timings = 0x00077771; break;
case XFER_MW_DMA_1: timings = 0x00012121; break;
case XFER_MW_DMA_2: timings = 0x00002020; break;
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- cs5530_tunepio(drive, mode - XFER_PIO_0);
- return 0;
default:
BUG();
break;
outl(reg, basereg + 4); /* write drive0 config register */
outl(timings, basereg + 12); /* write drive1 config register */
}
-
- return 0; /* success */
}
/**
{
unsigned long basereg;
u32 d0_timings;
- hwif->autodma = 0;
- if (hwif->mate)
- hwif->serialized = hwif->mate->serialized = 1;
-
- hwif->tuneproc = &cs5530_tuneproc;
- hwif->speedproc = &cs5530_tune_chipset;
+ hwif->set_pio_mode = &cs5530_set_pio_mode;
+ hwif->set_dma_mode = &cs5530_set_dma_mode;
basereg = CS5530_BASEREG(hwif);
d0_timings = inl(basereg + 0);
- if (CS5530_BAD_PIO(d0_timings)) {
- /* PIO timings not initialized? */
+ if (CS5530_BAD_PIO(d0_timings))
outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 0);
- if (!hwif->drives[0].autotune)
- hwif->drives[0].autotune = 1;
- /* needs autotuning later */
- }
- if (CS5530_BAD_PIO(inl(basereg + 8))) {
- /* PIO timings not initialized? */
+ if (CS5530_BAD_PIO(inl(basereg + 8)))
outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 8);
- if (!hwif->drives[1].autotune)
- hwif->drives[1].autotune = 1;
- /* needs autotuning later */
- }
if (hwif->dma_base == 0)
return;
- hwif->atapi_dma = 1;
- hwif->ultra_mask = 0x07;
- hwif->mwdma_mask = 0x07;
-
hwif->udma_filter = cs5530_udma_filter;
- hwif->ide_dma_check = &cs5530_config_dma;
- if (!noautodma)
- hwif->autodma = 1;
- hwif->drives[0].autodma = hwif->autodma;
- hwif->drives[1].autodma = hwif->autodma;
}
static ide_pci_device_t cs5530_chipset __devinitdata = {
.name = "CS5530",
.init_chipset = init_chipset_cs5530,
.init_hwif = init_hwif_cs5530,
- .autodma = AUTODMA,
- .bootable = ON_BOARD,
+ .host_flags = IDE_HFLAG_SERIALIZE |
+ IDE_HFLAG_POST_SET_MODE |
+ IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2,
+ .udma_mask = ATA_UDMA2,
};
static int __devinit cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id)
return ide_setup_pci_device(dev, &cs5530_chipset);
}
-static struct pci_device_id cs5530_pci_tbl[] = {
- { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+static const struct pci_device_id cs5530_pci_tbl[] = {
+ { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, cs5530_pci_tbl);
projects / linux-2.6-omap-h63xx.git / blobdiff