#define IDE_WAKEUP_DELAY (1*HZ)
static int pmac_ide_init_dma(ide_hwif_t *, const struct ide_port_info *);
-static void pmac_ide_selectproc(ide_drive_t *drive);
-static void pmac_ide_kauai_selectproc(ide_drive_t *drive);
#define PMAC_IDE_REG(x) \
((void __iomem *)((drive)->hwif->io_ports.data_addr + (x)))
* timing register when selecting that unit. This version is for
* ASICs with a single timing register
*/
-static void
-pmac_ide_selectproc(ide_drive_t *drive)
+static void pmac_ide_apply_timings(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
pmac_ide_hwif_t *pmif =
* timing register when selecting that unit. This version is for
* ASICs with a dual timing register (Kauai)
*/
-static void
-pmac_ide_kauai_selectproc(ide_drive_t *drive)
+static void pmac_ide_kauai_apply_timings(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
pmac_ide_hwif_t *pmif =
if (pmif->kind == controller_sh_ata6 ||
pmif->kind == controller_un_ata6 ||
pmif->kind == controller_k2_ata6)
- pmac_ide_kauai_selectproc(drive);
+ pmac_ide_kauai_apply_timings(drive);
else
- pmac_ide_selectproc(drive);
+ pmac_ide_apply_timings(drive);
+}
+
+static void pmac_dev_select(ide_drive_t *drive)
+{
+ pmac_ide_apply_timings(drive);
+
+ writeb(drive->select | ATA_DEVICE_OBS,
+ (void __iomem *)drive->hwif->io_ports.device_addr);
+}
+
+static void pmac_kauai_dev_select(ide_drive_t *drive)
+{
+ pmac_ide_kauai_apply_timings(drive);
+
+ writeb(drive->select | ATA_DEVICE_OBS,
+ (void __iomem *)drive->hwif->io_ports.device_addr);
}
static void pmac_exec_command(ide_hwif_t *hwif, u8 cmd)
+ IDE_TIMING_CONFIG));
}
-static void pmac_set_irq(ide_hwif_t *hwif, int on)
+static void pmac_write_devctl(ide_hwif_t *hwif, u8 ctl)
{
- u8 ctl = ATA_DEVCTL_OBS;
-
- if (on == 4) { /* hack for SRST */
- ctl |= 4;
- on &= ~4;
- }
-
- ctl |= on ? 0 : 2;
-
writeb(ctl, (void __iomem *)hwif->io_ports.ctl_addr);
(void)readl((void __iomem *)(hwif->io_ports.data_addr
+ IDE_TIMING_CONFIG));
(pmac_ide_hwif_t *)dev_get_drvdata(hwif->gendev.parent);
struct device_node *np = pmif->node;
const char *cable = of_get_property(np, "cable-type", NULL);
+ struct device_node *root = of_find_node_by_path("/");
+ const char *model = of_get_property(root, "model", NULL);
/* Get cable type from device-tree. */
- if (cable && !strncmp(cable, "80-", 3))
- return ATA_CBL_PATA80;
+ if (cable && !strncmp(cable, "80-", 3)) {
+ /* Some drives fail to detect 80c cable in PowerBook */
+ /* These machine use proprietary short IDE cable anyway */
+ if (!strncmp(model, "PowerBook", 9))
+ return ATA_CBL_PATA40_SHORT;
+ else
+ return ATA_CBL_PATA80;
+ }
/*
* G5's seem to have incorrect cable type in device-tree.
.exec_command = pmac_exec_command,
.read_status = ide_read_status,
.read_altstatus = ide_read_altstatus,
+ .write_devctl = pmac_write_devctl,
- .set_irq = pmac_set_irq,
-
+ .dev_select = pmac_dev_select,
.tf_load = ide_tf_load,
.tf_read = ide_tf_read,
.output_data = ide_output_data,
};
-static const struct ide_port_ops pmac_ide_ata6_port_ops = {
- .init_dev = pmac_ide_init_dev,
- .set_pio_mode = pmac_ide_set_pio_mode,
- .set_dma_mode = pmac_ide_set_dma_mode,
- .selectproc = pmac_ide_kauai_selectproc,
- .cable_detect = pmac_ide_cable_detect,
+static const struct ide_tp_ops pmac_ata6_tp_ops = {
+ .exec_command = pmac_exec_command,
+ .read_status = ide_read_status,
+ .read_altstatus = ide_read_altstatus,
+ .write_devctl = pmac_write_devctl,
+
+ .dev_select = pmac_kauai_dev_select,
+ .tf_load = ide_tf_load,
+ .tf_read = ide_tf_read,
+
+ .input_data = ide_input_data,
+ .output_data = ide_output_data,
};
static const struct ide_port_ops pmac_ide_ata4_port_ops = {
.init_dev = pmac_ide_init_dev,
.set_pio_mode = pmac_ide_set_pio_mode,
.set_dma_mode = pmac_ide_set_dma_mode,
- .selectproc = pmac_ide_selectproc,
.cable_detect = pmac_ide_cable_detect,
};
.init_dev = pmac_ide_init_dev,
.set_pio_mode = pmac_ide_set_pio_mode,
.set_dma_mode = pmac_ide_set_dma_mode,
- .selectproc = pmac_ide_selectproc,
};
static const struct ide_dma_ops pmac_dma_ops;
pmif->broken_dma = pmif->broken_dma_warn = 0;
if (of_device_is_compatible(np, "shasta-ata")) {
pmif->kind = controller_sh_ata6;
- d.port_ops = &pmac_ide_ata6_port_ops;
+ d.tp_ops = &pmac_ata6_tp_ops;
+ d.port_ops = &pmac_ide_ata4_port_ops;
d.udma_mask = ATA_UDMA6;
} else if (of_device_is_compatible(np, "kauai-ata")) {
pmif->kind = controller_un_ata6;
- d.port_ops = &pmac_ide_ata6_port_ops;
+ d.tp_ops = &pmac_ata6_tp_ops;
+ d.port_ops = &pmac_ide_ata4_port_ops;
d.udma_mask = ATA_UDMA5;
} else if (of_device_is_compatible(np, "K2-UATA")) {
pmif->kind = controller_k2_ata6;
- d.port_ops = &pmac_ide_ata6_port_ops;
+ d.tp_ops = &pmac_ata6_tp_ops;
+ d.port_ops = &pmac_ide_ata4_port_ops;
d.udma_mask = ATA_UDMA5;
} else if (of_device_is_compatible(np, "keylargo-ata")) {
if (strcmp(np->name, "ata-4") == 0) {
"switching to PIO on Ohare chipset\n", drive->name);
pmif->broken_dma_warn = 1;
}
- goto use_pio_instead;
+ return 0;
}
while (cur_len) {
unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00;
if (count++ >= MAX_DCMDS) {
printk(KERN_WARNING "%s: DMA table too small\n",
drive->name);
- goto use_pio_instead;
+ return 0;
}
st_le16(&table->command, wr? OUTPUT_MORE: INPUT_MORE);
st_le16(&table->req_count, tc);
printk(KERN_DEBUG "%s: empty DMA table?\n", drive->name);
-use_pio_instead:
- ide_destroy_dmatable(drive);
-
return 0; /* revert to PIO for this request */
}
u8 unit = drive->dn & 1, ata4 = (pmif->kind == controller_kl_ata4);
u8 write = !!(cmd->tf_flags & IDE_TFLAG_WRITE);
- if (pmac_ide_build_dmatable(drive, cmd) == 0) {
- ide_map_sg(drive, cmd);
+ if (pmac_ide_build_dmatable(drive, cmd) == 0)
return 1;
- }
/* Apple adds 60ns to wrDataSetup on reads */
if (ata4 && (pmif->timings[unit] & TR_66_UDMA_EN)) {
(void)readl(PMAC_IDE_REG(IDE_TIMING_CONFIG));
}
- drive->waiting_for_dma = 1;
-
return 0;
}
volatile struct dbdma_regs __iomem *dma = pmif->dma_regs;
u32 dstat;
- drive->waiting_for_dma = 0;
dstat = readl(&dma->status);
writel(((RUN|WAKE|DEAD) << 16), &dma->control);
- ide_destroy_dmatable(drive);
-
/* verify good dma status. we don't check for ACTIVE beeing 0. We should...
* in theory, but with ATAPI decices doing buffer underruns, that would
* cause us to disable DMA, which isn't what we want
projects / linux-2.6-omap-h63xx.git / blobdiff