/*
- $Id: bttv-cards.c,v 1.47 2005/02/22 14:06:32 kraxel Exp $
bttv-cards.c
#include <asm/io.h>
#include "bttvp.h"
-#if 0 /* not working yet */
-#include "bt832.h"
-#endif
/* fwd decl */
static void boot_msp34xx(struct bttv *btv, int pin);
static unsigned int triton1=0;
static unsigned int vsfx=0;
static unsigned int latency = UNSET;
-static unsigned int no_overlay=-1;
+int no_overlay=-1;
static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
{ 0xd01810fc, BTTV_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" },
{ 0x001211bd, BTTV_PINNACLE, "Pinnacle PCTV" },
- // some cards ship with byteswapped IDs ...
+ /* some cards ship with byteswapped IDs ... */
{ 0x1200bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" },
{ 0xff00bd11, BTTV_PINNACLE, "Pinnacle PCTV [bswap]" },
- // this seems to happen as well ...
+ /* this seems to happen as well ... */
{ 0xff1211bd, BTTV_PINNACLE, "Pinnacle PCTV" },
{ 0x3000121a, BTTV_VOODOOTV_FM, "3Dfx VoodooTV FM/ VoodooTV 200" },
{ 0x1123153b, BTTV_TERRATVRADIO, "Terratec TV Radio+" },
{ 0x1127153b, BTTV_TERRATV, "Terratec TV+ (V1.05)" },
- // clashes with FlyVideo
- //{ 0x18521852, BTTV_TERRATV, "Terratec TV+ (V1.10)" },
+ /* clashes with FlyVideo
+ *{ 0x18521852, BTTV_TERRATV, "Terratec TV+ (V1.10)" }, */
{ 0x1134153b, BTTV_TERRATVALUE, "Terratec TValue (LR102)" },
- { 0x1135153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, // LR102
- { 0x5018153b, BTTV_TERRATVALUE, "Terratec TValue" }, // ??
- { 0xff3b153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, // ??
+ { 0x1135153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */
+ { 0x5018153b, BTTV_TERRATVALUE, "Terratec TValue" }, /* ?? */
+ { 0xff3b153b, BTTV_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */
{ 0x400015b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
{ 0x400a15b0, BTTV_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
{ 0x01071805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
{ 0x01081805, BTTV_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
- // likely broken, vendor id doesn't match the other magic views ...
- //{ 0xa0fca04f, BTTV_MAGICTVIEW063, "Guillemot Maxi TV Video 3" },
+ { 0x15409511, BTTV_ACORP_Y878F, "Acorp Y878F" },
+
+ /* likely broken, vendor id doesn't match the other magic views ...
+ * { 0xa0fca04f, BTTV_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
- // DVB cards (using pci function .1 for mpeg data xfer)
+ /* DVB cards (using pci function .1 for mpeg data xfer) */
{ 0x01010071, BTTV_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
{ 0x07611461, BTTV_AVDVBT_761, "AverMedia AverTV DVB-T 761" },
{ 0x001c11bd, BTTV_PINNACLESAT, "Pinnacle PCTV Sat" },
{ 0x00011822, BTTV_TWINHAN_DST, "Twinhan VisionPlus DVB" },
{ 0xfc00270f, BTTV_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" },
{ 0x07711461, BTTV_AVDVBT_771, "AVermedia AverTV DVB-T 771" },
- { 0xdb1018ac, BTTV_DVICO_DVBT_LITE, "DVICO FusionHDTV DVB-T Lite" },
+ { 0xdb1018ac, BTTV_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" },
+ { 0xd50018ac, BTTV_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" },
{ 0, -1, NULL }
};
.svhs = 2,
.muxsel = { 2, 3, 1, 0},
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "MIRO PCTV",
.video_inputs = 4,
.audiomux = { 2, 0, 0, 0, 10},
.needs_tvaudio = 1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "Hauppauge (bt848)",
.video_inputs = 4,
.audiomux = { 0, 1, 2, 3, 4},
.needs_tvaudio = 1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "STB, Gateway P/N 6000699 (bt848)",
.video_inputs = 3,
.no_msp34xx = 1,
.needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_NTSC,
+ .tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},{
.audiomux = { 0 },
.needs_tvaudio = 0,
.tuner_type = 4,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "Diamond DTV2000",
.video_inputs = 4,
.audiomux = { 0, 1, 0, 1, 3},
.needs_tvaudio = 1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "AVerMedia TVPhone",
.video_inputs = 3,
/* 0x04 for some cards ?? */
.needs_tvaudio = 1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
.audio_hook = avermedia_tvphone_audio,
.has_remote = 1,
},{
.audiomux = {0 },
.needs_tvaudio = 1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
/* ---- card 0x08 ---------------------------------- */
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "IMS/IXmicro TurboTV",
.video_inputs = 3,
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_PAL,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "Hauppauge (bt878)",
.video_inputs = 4,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "MIRO PCTV pro",
.video_inputs = 3,
.audiomux = { 0x20001,0x10001, 0, 0,10},
.needs_tvaudio = 1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
/* ---- card 0x0c ---------------------------------- */
.audiomux = { 13, 14, 11, 7, 0, 0},
.needs_tvaudio = 1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "AVerMedia TVCapture 98",
.video_inputs = 3,
.msp34xx_alt = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
.audio_hook = avermedia_tv_stereo_audio,
},{
.name = "Aimslab Video Highway Xtreme (VHX)",
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "Zoltrix TV-Max",
.video_inputs = 3,
.audiomux = {0 , 0, 1 , 0, 10},
.needs_tvaudio = 1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
/* ---- card 0x10 ---------------------------------- */
.svhs = 2,
.gpiomask = 0x01fe00,
.muxsel = { 2, 3, 1, 1},
-#if 0
- // old
- .audiomux = { 0x01c000, 0, 0x018000, 0x014000, 0x002000, 0 },
-#else
- // 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru>
+ /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
.audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
-#endif
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
.audiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007,0xcfa007},
.needs_tvaudio = 1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
.audio_hook = winview_audio,
.has_radio = 1,
},{
.audiomux = {1, 0, 0, 0, 0},
.needs_tvaudio = 1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
.video_inputs = 4,
.audiomux = { 0 },
.no_msp34xx = 1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
/* ---- card 0x14 ---------------------------------- */
.svhs = 2,
.muxsel = {2, 3, 1, 1},
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
.video_inputs = 4,
- .audio_inputs = 2, // tuner, line in
+ .audio_inputs = 2, /* tuner, line in */
.tuner = 0,
.svhs = 2,
.gpiomask = 0x1800,
.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "Askey CPH050/ Phoebe Tv Master + FM",
.video_inputs = 3,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
.video_inputs = 3,
.svhs = -1,
.gpiomask = 7,
.muxsel = { 2, 3, -1 },
- .digital_mode = DIGITAL_MODE_CAMERA,
+ .digital_mode = DIGITAL_MODE_CAMERA,
.audiomux = { 0, 0, 0, 0, 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ALPS_TSBB5_PAL_I,
+ .tuner_addr = ADDR_UNSET,
},{
/* ---- card 0x18 ---------------------------------- */
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
.has_remote = 1,
},{
.name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
.audiomux = { 0x20000, 0x30000, 0x10000, 0, 0x40000},
.needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
.audio_hook = terratv_audio,
},{
.name = "Hauppauge WinCam newer (bt878)",
.audiomux = { 0, 1, 2, 3, 4},
.needs_tvaudio = 1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
.video_inputs = 4,
.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_SECAM,
+ .tuner_addr = ADDR_UNSET,
},{
/* ---- card 0x1c ---------------------------------- */
.audiomux = { 0x20000, 0x30000, 0x10000, 0x00000, 0x40000},
.needs_tvaudio = 0,
.tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
.audio_hook = terratv_audio,
/* GPIO wiring:
- External 20 pin connector (for Active Radio Upgrade board)
- gpio00: i2c-sda
- gpio01: i2c-scl
- gpio02: om5610-data
- gpio03: om5610-clk
- gpio04: om5610-wre
- gpio05: om5610-stereo
- gpio06: rds6588-davn
- gpio07: Pin 7 n.c.
- gpio08: nIOW
- gpio09+10: nIOR, nSEL ?? (bt878)
- gpio09: nIOR (bt848)
- gpio10: nSEL (bt848)
- Sound Routing:
- gpio16: u2-A0 (1st 4052bt)
- gpio17: u2-A1
- gpio18: u2-nEN
- gpio19: u4-A0 (2nd 4052)
- gpio20: u4-A1
- u4-nEN - GND
- Btspy:
- 00000 : Cdrom (internal audio input)
+ External 20 pin connector (for Active Radio Upgrade board)
+ gpio00: i2c-sda
+ gpio01: i2c-scl
+ gpio02: om5610-data
+ gpio03: om5610-clk
+ gpio04: om5610-wre
+ gpio05: om5610-stereo
+ gpio06: rds6588-davn
+ gpio07: Pin 7 n.c.
+ gpio08: nIOW
+ gpio09+10: nIOR, nSEL ?? (bt878)
+ gpio09: nIOR (bt848)
+ gpio10: nSEL (bt848)
+ Sound Routing:
+ gpio16: u2-A0 (1st 4052bt)
+ gpio17: u2-A1
+ gpio18: u2-nEN
+ gpio19: u4-A0 (2nd 4052)
+ gpio20: u4-A1
+ u4-nEN - GND
+ Btspy:
+ 00000 : Cdrom (internal audio input)
10000 : ext. Video audio input
20000 : TV Mono
a0000 : TV Mono/2
- 1a0000 : TV Stereo
+ 1a0000 : TV Stereo
30000 : Radio
40000 : Mute
- */
+*/
},{
/* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
.audiomux = { 0 },
.needs_tvaudio = 1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
.muxsel_hook = PXC200_muxsel,
},{
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
- .gpiomask = 0x1800, //0x8dfe00
+ .gpiomask = 0x1800, /* 0x8dfe00 */
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0, 0x0800, 0x1000, 0x1000, 0x1800, 0 },
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "Formac iProTV, Formac ProTV I (bt848)",
.video_inputs = 4,
.audiomux = { 1, 0, 0, 0, 0 },
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
},{
/* ---- card 0x20 ---------------------------------- */
.audiomux = { 0 },
.needs_tvaudio = 0,
.tuner_type = 4,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "Terratec TerraTValue Version Bt878",
.video_inputs = 3,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "Leadtek WinFast 2000/ WinFast 2000 XP",
.video_inputs = 4,
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
- .muxsel = { 2, 3, 1, 1, 0}, // TV, CVid, SVid, CVid over SVid connector
-#if 0
- .gpiomask = 0xc33000,
- .audiomux = { 0x422000,0x1000,0x0000,0x620000,0x800000 },
-#else
+ .muxsel = { 2, 3, 1, 1, 0}, /* TV, CVid, SVid, CVid over SVid connector */
/* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
.gpiomask = 0xb33000,
.audiomux = { 0x122000,0x1000,0x0000,0x620000,0x800000 },
-#endif
/* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
gpio23 -- hef4052:nEnable (0x800000)
gpio12 -- hef4052:A1
- gpio13 -- hef4052:A0
- 0x0000: external audio
- 0x1000: FM
- 0x2000: TV
- 0x3000: n.c.
- Note: There exists another variant "Winfast 2000" with tv stereo !?
- Note: eeprom only contains FF and pci subsystem id 107d:6606
- */
+ gpio13 -- hef4052:A0
+ 0x0000: external audio
+ 0x1000: FM
+ 0x2000: TV
+ 0x3000: n.c.
+ Note: There exists another variant "Winfast 2000" with tv stereo !?
+ Note: eeprom only contains FF and pci subsystem id 107d:6606
+ */
.needs_tvaudio = 0,
.pll = PLL_28,
.has_radio = 1,
- .tuner_type = 5, // default for now, gpio reads BFFF06 for Pal bg+dk
+ .tuner_type = 5, /* default for now, gpio reads BFFF06 for Pal bg+dk */
+ .tuner_addr = ADDR_UNSET,
.audio_hook = winfast2000_audio,
.has_remote = 1,
},{
.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800},
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
/* ---- card 0x24 ---------------------------------- */
.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
.has_radio = 1,
},{
.name = "Prolink PixelView PlayTV pro",
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "Askey CPH06X TView99",
.video_inputs = 4,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = 1,
+ .tuner_addr = ADDR_UNSET,
.has_remote = 1,
},{
.name = "Pinnacle PCTV Studio/Rave",
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
/* ---- card 0x28 ---------------------------------- */
.no_msp34xx = 1,
.needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_NTSC,
+ .tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},{
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
.has_radio = 1,
.audio_hook = avermedia_tvphone_audio,
},{
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = 1,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "Little OnAir TV",
.video_inputs = 3,
.audiomux = {0xff9ff6, 0xff9ff6, 0xff1ff7, 0, 0xff3ffc},
.no_msp34xx = 1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
/* ---- card 0x2c ---------------------------------- */
.no_msp34xx = 1,
.pll = PLL_NONE,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "MATRIX-Vision MV-Delta 2",
.video_inputs = 5,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "Zoltrix Genie TV/FM",
.video_inputs = 3,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = 21,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "Terratec TV/Radio+",
.video_inputs = 3,
.no_msp34xx = 1,
.pll = PLL_35,
.tuner_type = 1,
+ .tuner_addr = ADDR_UNSET,
.has_radio = 1,
},{
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "IODATA GV-BCTV3/PCI",
.video_inputs = 3,
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_ALPS_TSHC6_NTSC,
+ .tuner_addr = ADDR_UNSET,
.audio_hook = gvbctv3pci_audio,
},{
.name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL_I,
+ .tuner_addr = ADDR_UNSET,
.has_remote = 1,
/* GPIO wiring: (different from Rev.4C !)
GPIO17: U4.A0 (first hef4052bt)
GPIO21: U4.nEN
GPIO22: BT832 Reset Line
GPIO23: A5,A0, U5,nEN
- Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
- */
+ Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
+ */
},{
.name = "Eagle Wireless Capricorn2 (bt878A)",
.video_inputs = 4,
.audiomux = { 0, 1, 2, 3, 4},
.pll = PLL_28,
.tuner_type = -1 /* TUNER_ALPS_TMDH2_NTSC */,
+ .tuner_addr = ADDR_UNSET,
},{
/* ---- card 0x34 ---------------------------------- */
.muxsel = { 2, 3, 1, 1},
.audiomux = { 1, 0xd0001, 0, 0, 10},
/* sound path (5 sources):
- MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
+ MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
0= ext. Audio IN
1= from MUX2
2= Mono TV sound from Tuner
3= not connected
- MUX2 (mask 0x30000):
+ MUX2 (mask 0x30000):
0,2,3= from MSP34xx
1= FM stereo Radio from Tuner */
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
/* Claas Langbehn <claas@bigfoot.com>,
- Sven Grothklags <sven@upb.de> */
+ Sven Grothklags <sven@upb.de> */
.name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
.video_inputs = 4,
.audio_inputs = 3,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
.has_radio = 1,
},{
/* Tim Röstermundt <rosterm@uni-muenster.de>
- in de.comp.os.unix.linux.hardware:
+ in de.comp.os.unix.linux.hardware:
options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
audiomux=0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
options tuner type=5 */
.gpiomask = 0x18e0,
.muxsel = { 2, 3, 1, 1},
.audiomux = { 0x0000,0x0800,0x1000,0x1000,0x18e0 },
- /* For cards with tda9820/tda9821:
- 0x0000: Tuner normal stereo
- 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
- 0x0880: Tuner A2 stereo */
+ /* For cards with tda9820/tda9821:
+ 0x0000: Tuner normal stereo
+ 0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
+ 0x0880: Tuner A2 stereo */
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
/* Miguel Angel Alvarez <maacruz@navegalia.com>
- old Easy TV BT848 version (model CPH031) */
+ old Easy TV BT848 version (model CPH031) */
.name = "Askey CPH031/ BESTBUY Easy TV",
.video_inputs = 4,
.audio_inputs = 1,
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_PAL,
+ .tuner_addr = ADDR_UNSET,
},{
/* ---- card 0x38 ---------------------------------- */
.audiomux = { 0, 0x800, 0x1000, 0x1000, 0x1800, 0 },
.pll = PLL_28,
.tuner_type = 5,
+ .tuner_addr = ADDR_UNSET,
},{
/* This is the ultimate cheapo capture card
- * just a BT848A on a small PCB!
- * Steve Hosgood <steve@equiinet.com> */
+ * just a BT848A on a small PCB!
+ * Steve Hosgood <steve@equiinet.com> */
.name = "GrandTec 'Grand Video Capture' (Bt848)",
.video_inputs = 2,
.audio_inputs = 0,
.no_msp34xx = 1,
.pll = PLL_35,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
- /* Daniel Herrington <daniel.herrington@home.com> */
- .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
- .video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
- .svhs = 2,
- .gpiomask = 0xe00,
- .muxsel = { 2, 3, 1, 1},
- .audiomux = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
- .needs_tvaudio = 1,
- .pll = PLL_28,
- .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
+ /* Daniel Herrington <daniel.herrington@home.com> */
+ .name = "Askey CPH060/ Phoebe TV Master Only (No FM)",
+ .video_inputs = 3,
+ .audio_inputs = 1,
+ .tuner = 0,
+ .svhs = 2,
+ .gpiomask = 0xe00,
+ .muxsel = { 2, 3, 1, 1},
+ .audiomux = { 0x400, 0x400, 0x400, 0x400, 0x800, 0x400 },
+ .needs_tvaudio = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_TEMIC_4036FY5_NTSC,
+ .tuner_addr = ADDR_UNSET,
},{
/* Matti Mottus <mottus@physic.ut.ee> */
.name = "Askey CPH03x TV Capturer",
.audio_inputs = 1,
.tuner = 0,
.svhs = 2,
- .gpiomask = 0x03000F,
+ .gpiomask = 0x03000F,
.muxsel = { 2, 3, 1, 0},
- .audiomux = { 2,0,0,0,1 },
+ .audiomux = { 2,0,0,0,1 },
.pll = PLL_28,
.tuner_type = 0,
+ .tuner_addr = ADDR_UNSET,
},{
/* ---- card 0x3c ---------------------------------- */
.audiomux = { 2, 0, 0, 1, 8},
.pll = PLL_35,
.tuner_type = TUNER_TEMIC_PAL,
-
+ .tuner_addr = ADDR_UNSET,
},{
/* Adrian Cox <adrian@humboldt.co.uk */
.name = "AG Electronics GMV1",
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
/* Miguel Angel Alvarez <maacruz@navegalia.com>
- new Easy TV BT878 version (model CPH061)
- special thanks to Informatica Mieres for providing the card */
+ new Easy TV BT878 version (model CPH061)
+ special thanks to Informatica Mieres for providing the card */
.name = "Askey CPH061/ BESTBUY Easy TV (bt878)",
.video_inputs = 3,
.audio_inputs = 2,
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
},{
/* Lukas Gebauer <geby@volny.cz> */
.name = "ATI TV-Wonder",
.audiomux = { 0xbffe, 0, 0xbfff, 0, 0xbffe},
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
+ .tuner_addr = ADDR_UNSET,
},{
/* ---- card 0x40 ---------------------------------- */
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL,
+ .tuner_addr = ADDR_UNSET,
},{
/* DeeJay <deejay@westel900.net (2000S) */
.name = "Lifeview FlyVideo 2000S LR90",
.gpiomask = 0x18e0,
.muxsel = { 2, 3, 0, 1},
/* Radio changed from 1e80 to 0x800 to make
- FlyVideo2000S in .hu happy (gm)*/
+ FlyVideo2000S in .hu happy (gm)*/
/* -dk-???: set mute=0x1800 for tda9874h daughterboard */
.audiomux = { 0x0000,0x0800,0x1000,0x1000,0x1800, 0x1080 },
.audio_hook = fv2000s_audio,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = 5,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "Terratec TValueRadio",
.video_inputs = 3,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
.has_radio = 1,
},{
/* TANAKA Kei <peg00625@nifty.com> */
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_SHARP_2U5JF5540_NTSC,
+ .tuner_addr = ADDR_UNSET,
.audio_hook = gvbctv3pci_audio,
},{
/* ---- card 0x44 ---------------------------------- */
- .name = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
- // try "insmod msp3400 simple=0" if you have
- // sound problems with this card.
- .video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
- .svhs = -1,
- .gpiomask = 0x4f8a00,
- // 0x100000: 1=MSP enabled (0=disable again)
- // 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC)
- .audiomux = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
- // tvtuner, radio, external,internal, mute, stereo
- /* tuner, Composit, SVid, Composit-on-Svid-adapter*/
- .muxsel = { 2, 3 ,0 ,1},
- .tuner_type = TUNER_MT2032,
+ .name = "3Dfx VoodooTV FM (Euro), VoodooTV 200 (USA)",
+ /* try "insmod msp3400 simple=0" if you have
+ * sound problems with this card. */
+ .video_inputs = 4,
+ .audio_inputs = 1,
+ .tuner = 0,
+ .svhs = -1,
+ .gpiomask = 0x4f8a00,
+ /* 0x100000: 1=MSP enabled (0=disable again)
+ * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
+ .audiomux = {0x947fff, 0x987fff,0x947fff,0x947fff, 0x947fff},
+ /* tvtuner, radio, external,internal, mute, stereo
+ * tuner, Composit, SVid, Composit-on-Svid-adapter */
+ .muxsel = { 2, 3 ,0 ,1},
+ .tuner_type = TUNER_MT2032,
+ .tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},{
.audio_inputs = 0,
.tuner = -1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.muxsel = { 2 },
.gpiomask = 0
},{
- /* Tomasz Pyra <hellfire@sedez.iq.pl> */
- .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
- .video_inputs = 3,
- .audio_inputs = 4,
- .tuner = 0,
- .svhs = 2,
- .gpiomask = 15,
- .muxsel = { 2, 3, 1, 1},
- .audiomux = { 0, 0, 11, 7, 13, 0}, // TV and Radio with same GPIO !
- .needs_tvaudio = 1,
- .pll = PLL_28,
- .tuner_type = 25,
+ /* Tomasz Pyra <hellfire@sedez.iq.pl> */
+ .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
+ .video_inputs = 3,
+ .audio_inputs = 4,
+ .tuner = 0,
+ .svhs = 2,
+ .gpiomask = 15,
+ .muxsel = { 2, 3, 1, 1},
+ .audiomux = { 0, 0, 11, 7, 13, 0}, /* TV and Radio with same GPIO ! */
+ .needs_tvaudio = 1,
+ .pll = PLL_28,
+ .tuner_type = 25,
+ .tuner_addr = ADDR_UNSET,
.has_remote = 1,
/* GPIO wiring:
GPIO0: U4.A0 (hef4052bt)
GPIO2: U4.A1 (second hef4052bt)
GPIO3: U4.nEN, U5.A0, A5.nEN
GPIO8-15: vrd866b ?
- */
+ */
},{
.name = "Lifeview FlyVideo 98EZ (capture only) LR51",
.video_inputs = 4,
.audio_inputs = 0,
.tuner = -1,
.svhs = 2,
- .muxsel = { 2, 3, 1, 1}, // AV1, AV2, SVHS, CVid adapter on SVHS
+ .muxsel = { 2, 3, 1, 1}, /* AV1, AV2, SVHS, CVid adapter on SVHS */
.pll = PLL_28,
.no_msp34xx = 1,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
},{
/* ---- card 0x48 ---------------------------------- */
.no_tda9875 = 1,
.pll = PLL_28,
.tuner_type = 5,
- .audio_hook = pvbt878p9b_audio, // Note: not all cards have stereo
- .has_radio = 1, // Note: not all cards have radio
+ .tuner_addr = ADDR_UNSET,
+ .audio_hook = pvbt878p9b_audio, /* Note: not all cards have stereo */
+ .has_radio = 1, /* Note: not all cards have radio */
.has_remote = 1,
/* GPIO wiring:
GPIO0: A0 hef4052
GPIO3: nEN hef4052
GPIO8-15: vrd866b
GPIO20,22,23: R30,R29,R28
- */
+ */
},{
/* Clay Kunz <ckunz@mail.arc.nasa.gov> */
/* you must jumper JP5 for the card to work */
.audiomux = { 0 },
.needs_tvaudio = 0,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
/* Miguel Freitas <miguel@cetuc.puc-rio.br> */
.name = "RemoteVision MX (RV605)",
.gpiomask = 0x00,
.gpiomask2 = 0x07ff,
.muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03,
- 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
+ 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 },
.no_msp34xx = 1,
.no_tda9875 = 1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
.muxsel_hook = rv605_muxsel,
},{
- .name = "Powercolor MTV878/ MTV878R/ MTV878F",
- .video_inputs = 3,
- .audio_inputs = 2,
+ .name = "Powercolor MTV878/ MTV878R/ MTV878F",
+ .video_inputs = 3,
+ .audio_inputs = 2,
.tuner = 0,
- .svhs = 2,
- .gpiomask = 0x1C800F, // Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset
- .muxsel = { 2, 1, 1, },
- .audiomux = { 0, 1, 2, 2, 4 },
- .needs_tvaudio = 0,
- .tuner_type = TUNER_PHILIPS_PAL,
+ .svhs = 2,
+ .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
+ .muxsel = { 2, 1, 1, },
+ .audiomux = { 0, 1, 2, 2, 4 },
+ .needs_tvaudio = 0,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
.pll = PLL_28,
.has_radio = 1,
},{
/* ---- card 0x4c ---------------------------------- */
- /* Masaki Suzuki <masaki@btree.org> */
- .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
- .video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
- .svhs = 2,
- .gpiomask = 0x140007,
- .muxsel = { 2, 3, 1, 1 },
- .audiomux = { 0, 1, 2, 3, 4, 0 },
- .tuner_type = TUNER_PHILIPS_NTSC,
- .audio_hook = windvr_audio,
-},{
- .name = "GrandTec Multi Capture Card (Bt878)",
- .video_inputs = 4,
- .audio_inputs = 0,
- .tuner = -1,
- .svhs = -1,
- .gpiomask = 0,
- .muxsel = { 2, 3, 1, 0 },
- .audiomux = { 0 },
- .needs_tvaudio = 0,
- .no_msp34xx = 1,
- .pll = PLL_28,
- .tuner_type = -1,
-},{
- .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
- .video_inputs = 4,
- .audio_inputs = 3,
- .tuner = 0,
- .svhs = 2,
- .gpiomask = 7,
- .muxsel = { 2, 3, 1, 1 }, // Tuner, SVid, SVHS, SVid to SVHS connector
- .audiomux = { 0 ,0 ,4, 4,4,4},// Yes, this tuner uses the same audio output for TV and FM radio!
- // This card lacks external Audio In, so we mute it on Ext. & Int.
- // The PCB can take a sbx1637/sbx1673, wiring unknown.
- // This card lacks PCI subsystem ID, sigh.
- // audiomux=1: lower volume, 2+3: mute
- // btwincap uses 0x80000/0x80003
- .needs_tvaudio = 0,
- .no_msp34xx = 1,
- .pll = PLL_28,
- .tuner_type = 5, // Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
- // radio signal strength indicators work fine.
- .has_radio = 1,
+ /* Masaki Suzuki <masaki@btree.org> */
+ .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
+ .video_inputs = 3,
+ .audio_inputs = 1,
+ .tuner = 0,
+ .svhs = 2,
+ .gpiomask = 0x140007,
+ .muxsel = { 2, 3, 1, 1 },
+ .audiomux = { 0, 1, 2, 3, 4, 0 },
+ .tuner_type = TUNER_PHILIPS_NTSC,
+ .tuner_addr = ADDR_UNSET,
+ .audio_hook = windvr_audio,
+},{
+ .name = "GrandTec Multi Capture Card (Bt878)",
+ .video_inputs = 4,
+ .audio_inputs = 0,
+ .tuner = -1,
+ .svhs = -1,
+ .gpiomask = 0,
+ .muxsel = { 2, 3, 1, 0 },
+ .audiomux = { 0 },
+ .needs_tvaudio = 0,
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
+},{
+ .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
+ .video_inputs = 4,
+ .audio_inputs = 3,
+ .tuner = 0,
+ .svhs = 2,
+ .gpiomask = 7,
+ .muxsel = { 2, 3, 1, 1 }, /* Tuner, SVid, SVHS, SVid to SVHS connector */
+ .audiomux = { 0 ,0 ,4, 4,4,4},/* Yes, this tuner uses the same audio output for TV and FM radio!
+ * This card lacks external Audio In, so we mute it on Ext. & Int.
+ * The PCB can take a sbx1637/sbx1673, wiring unknown.
+ * This card lacks PCI subsystem ID, sigh.
+ * audiomux=1: lower volume, 2+3: mute
+ * btwincap uses 0x80000/0x80003
+ */
+ .needs_tvaudio = 0,
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = 5,
+ .tuner_addr = ADDR_UNSET,
+ /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
+ radio signal strength indicators work fine. */
+ .has_radio = 1,
/* GPIO Info:
GPIO0,1: HEF4052 A0,A1
GPIO2: HEF4052 nENABLE
GPIO22,23: ??
?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
},{
- /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
- .name = "DSP Design TCVIDEO",
- .video_inputs = 4,
- .svhs = -1,
- .muxsel = { 2, 3, 1, 0},
- .pll = PLL_28,
- .tuner_type = -1,
+ /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
+ .name = "DSP Design TCVIDEO",
+ .video_inputs = 4,
+ .svhs = -1,
+ .muxsel = { 2, 3, 1, 0},
+ .pll = PLL_28,
+ .tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
- /* ---- card 0x50 ---------------------------------- */
+ /* ---- card 0x50 ---------------------------------- */
.name = "Hauppauge WinTV PVR",
- .video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
- .svhs = 2,
- .muxsel = { 2, 0, 1, 1},
- .needs_tvaudio = 1,
- .pll = PLL_28,
- .tuner_type = -1,
+ .video_inputs = 4,
+ .audio_inputs = 1,
+ .tuner = 0,
+ .svhs = 2,
+ .muxsel = { 2, 0, 1, 1},
+ .needs_tvaudio = 1,
+ .pll = PLL_28,
+ .tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
.gpiomask = 7,
.audiomux = {7},
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC_M,
+ .tuner_addr = ADDR_UNSET,
.audio_hook = gvbctv5pci_audio,
.has_radio = 1,
},{
.muxsel = { 3, 2, 0, 1 },
.pll = PLL_28,
.tuner_type = -1,
- .no_msp34xx = 1,
- .no_tda9875 = 1,
- .no_tda7432 = 1,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda9875 = 1,
+ .no_tda7432 = 1,
},{
.name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
.video_inputs = 3,
.muxsel = { 2, 3, 1 },
.pll = PLL_28,
.tuner_type = -1,
- .no_msp34xx = 1,
- .no_tda9875 = 1,
- .no_tda7432 = 1,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda9875 = 1,
+ .no_tda7432 = 1,
},{
/* ---- card 0x54 ---------------------------------- */
.muxsel = { 3, 1 },
.pll = PLL_28,
.tuner_type = -1,
- .no_msp34xx = 1,
- .no_tda9875 = 1,
- .no_tda7432 = 1,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda9875 = 1,
+ .no_tda7432 = 1,
},{
.name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */
.video_inputs = 1,
.muxsel = { 0 },
.pll = PLL_28,
.tuner_type = -1,
- .no_msp34xx = 1,
- .no_tda9875 = 1,
- .no_tda7432 = 1,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda9875 = 1,
+ .no_tda7432 = 1,
},{
.name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */
.video_inputs = 2,
.muxsel = { 0, 1 },
.pll = PLL_28,
.tuner_type = -1,
- .no_msp34xx = 1,
- .no_tda9875 = 1,
- .no_tda7432 = 1,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda9875 = 1,
+ .no_tda7432 = 1,
},{
.name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */
.video_inputs = 1,
.svhs = -1,
.muxsel = { 0 },
.pll = PLL_28,
- .tuner_type = -1,
- .no_msp34xx = 1,
- .no_tda9875 = 1,
- .no_tda7432 = 1,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda9875 = 1,
+ .no_tda7432 = 1,
},{
/* ---- card 0x58 ---------------------------------- */
.svhs = 1,
.muxsel = { 0, 1 },
.pll = PLL_28,
- .tuner_type = -1,
- .no_msp34xx = 1,
- .no_tda9875 = 1,
- .no_tda7432 = 1,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda9875 = 1,
+ .no_tda7432 = 1,
},{
.name = "Osprey 210/220", /* 0x1(A|B)-04C0-C1 */
.video_inputs = 2,
.svhs = 1,
.muxsel = { 2, 3 },
.pll = PLL_28,
- .tuner_type = -1,
- .no_msp34xx = 1,
- .no_tda9875 = 1,
- .no_tda7432 = 1,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda9875 = 1,
+ .no_tda7432 = 1,
},{
.name = "Osprey 500", /* 500 */
.video_inputs = 2,
.muxsel = { 2, 3 },
.pll = PLL_28,
.tuner_type = -1,
- .no_msp34xx = 1,
- .no_tda9875 = 1,
- .no_tda7432 = 1,
-},{
- .name = "Osprey 540", /* 540 */
- .video_inputs = 4,
- .audio_inputs = 1,
- .tuner = -1,
-#if 0 /* TODO ... */
- .svhs = OSPREY540_SVID_ANALOG,
- .muxsel = { [OSPREY540_COMP_ANALOG] = 2,
- [OSPREY540_SVID_ANALOG] = 3, },
-#endif
- .pll = PLL_28,
- .tuner_type = -1,
- .no_msp34xx = 1,
- .no_tda9875 = 1,
- .no_tda7432 = 1,
-#if 0 /* TODO ... */
- .muxsel_hook = osprey_540_muxsel,
- .picture_hook = osprey_540_set_picture,
-#endif
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda9875 = 1,
+ .no_tda7432 = 1,
+},{
+ .name = "Osprey 540", /* 540 */
+ .video_inputs = 4,
+ .audio_inputs = 1,
+ .tuner = -1,
+ .pll = PLL_28,
+ .tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda9875 = 1,
+ .no_tda7432 = 1,
},{
/* ---- card 0x5C ---------------------------------- */
.svhs = 1,
.muxsel = { 2, 3 },
.pll = PLL_28,
- .tuner_type = -1,
- .no_msp34xx = 1,
- .no_tda9875 = 1,
- .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
+ .no_msp34xx = 1,
+ .no_tda9875 = 1,
+ .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */
},{
/* M G Berberich <berberic@forwiss.uni-passau.de> */
.name = "IDS Eagle",
.audio_inputs = 0,
.tuner = -1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
.svhs = -1,
.gpiomask = 0,
.muxsel = { 0, 1, 2, 3 },
.svhs = 1,
.tuner = -1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_tda7432 = 1,
.no_gpioirq = 1,
.has_dvb = 1,
},{
- .name = "Formac ProTV II (bt878)",
- .video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
- .svhs = 3,
- .gpiomask = 2,
- // TV, Comp1, Composite over SVID con, SVID
- .muxsel = { 2, 3, 1, 1},
- .audiomux = { 2, 2, 0, 0, 0 },
- .pll = PLL_28,
+ .name = "Formac ProTV II (bt878)",
+ .video_inputs = 4,
+ .audio_inputs = 1,
+ .tuner = 0,
+ .svhs = 3,
+ .gpiomask = 2,
+ /* TV, Comp1, Composite over SVID con, SVID */
+ .muxsel = { 2, 3, 1, 1},
+ .audiomux = { 2, 2, 0, 0, 0 },
+ .pll = PLL_28,
.has_radio = 1,
- .tuner_type = TUNER_PHILIPS_PAL,
- /* sound routing:
- GPIO=0x00,0x01,0x03: mute (?)
- 0x02: both TV and radio (tuner: FM1216/I)
- The card has onboard audio connectors labeled "cdrom" and "board",
- not soldered here, though unknown wiring.
- Card lacks: external audio in, pci subsystem id.
- */
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+/* sound routing:
+ GPIO=0x00,0x01,0x03: mute (?)
+ 0x02: both TV and radio (tuner: FM1216/I)
+ The card has onboard audio connectors labeled "cdrom" and "board",
+ not soldered here, though unknown wiring.
+ Card lacks: external audio in, pci subsystem id.
+*/
},{
/* ---- card 0x60 ---------------------------------- */
.name = "MachTV",
- .video_inputs = 3,
- .audio_inputs = 1,
- .tuner = 0,
- .svhs = -1,
- .gpiomask = 7,
- .muxsel = { 2, 3, 1, 1},
- .audiomux = { 0, 1, 2, 3, 4},
- .needs_tvaudio = 1,
- .tuner_type = 5,
+ .video_inputs = 3,
+ .audio_inputs = 1,
+ .tuner = 0,
+ .svhs = -1,
+ .gpiomask = 7,
+ .muxsel = { 2, 3, 1, 1},
+ .audiomux = { 0, 1, 2, 3, 4},
+ .needs_tvaudio = 1,
+ .tuner_type = 5,
+ .tuner_addr = ADDR_UNSET,
.pll = 1,
},{
.name = "Euresys Picolo",
.no_tda7432 = 1,
.muxsel = { 2, 0, 1},
.pll = PLL_28,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
},{
/* Luc Van Hoeylandt <luc@e-magic.be> */
.name = "ProVideo PV150", /* 0x4f */
.needs_tvaudio = 0,
.no_msp34xx = 1,
.pll = PLL_28,
- .tuner_type = -1,
+ .tuner_type = UNSET,
+ .tuner_addr = ADDR_UNSET,
},{
/* Hiroshi Takekawa <sian@big.or.jp> */
/* This card lacks subsystem ID */
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = 2,
+ .tuner_addr = ADDR_UNSET,
.audio_hook = adtvk503_audio,
},{
/* ---- card 0x64 ---------------------------------- */
- .name = "Hercules Smart TV Stereo",
- .video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
- .svhs = 2,
- .gpiomask = 0x00,
- .muxsel = { 2, 3, 1, 1 },
- .needs_tvaudio = 1,
- .no_msp34xx = 1,
- .pll = PLL_28,
- .tuner_type = 5,
+ .name = "Hercules Smart TV Stereo",
+ .video_inputs = 4,
+ .audio_inputs = 1,
+ .tuner = 0,
+ .svhs = 2,
+ .gpiomask = 0x00,
+ .muxsel = { 2, 3, 1, 1 },
+ .needs_tvaudio = 1,
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = 5,
+ .tuner_addr = ADDR_UNSET,
/* Notes:
- - card lacks subsystem ID
- - stereo variant w/ daughter board with tda9874a @0xb0
- - Audio Routing:
+ - card lacks subsystem ID
+ - stereo variant w/ daughter board with tda9874a @0xb0
+ - Audio Routing:
always from tda9874 independent of GPIO (?)
external line in: unknown
- - Other chips: em78p156elp @ 0x96 (probably IR remote control)
- hef4053 (instead 4052) for unknown function
+ - Other chips: em78p156elp @ 0x96 (probably IR remote control)
+ hef4053 (instead 4052) for unknown function
*/
},{
- .name = "Pace TV & Radio Card",
- .video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
- .svhs = 2,
- .muxsel = { 2, 3, 1, 1}, // Tuner, CVid, SVid, CVid over SVid connector
- .gpiomask = 0,
- .no_tda9875 = 1,
- .no_tda7432 = 1,
- .tuner_type = 1,
- .has_radio = 1,
- .pll = PLL_28,
- /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
- only internal line out: (4pin header) RGGL
- Radio must be decoded by msp3410d (not routed through)*/
- // .digital_mode = DIGITAL_MODE_CAMERA, // todo!
-},{
- /* Chris Willing <chris@vislab.usyd.edu.au> */
- .name = "IVC-200",
- .video_inputs = 1,
- .audio_inputs = 0,
- .tuner = -1,
- .tuner_type = -1,
- .svhs = -1,
- .gpiomask = 0xdf,
- .muxsel = { 2 },
- .pll = PLL_28,
+ .name = "Pace TV & Radio Card",
+ .video_inputs = 4,
+ .audio_inputs = 1,
+ .tuner = 0,
+ .svhs = 2,
+ .muxsel = { 2, 3, 1, 1}, /* Tuner, CVid, SVid, CVid over SVid connector */
+ .gpiomask = 0,
+ .no_tda9875 = 1,
+ .no_tda7432 = 1,
+ .tuner_type = 1,
+ .tuner_addr = ADDR_UNSET,
+ .has_radio = 1,
+ .pll = PLL_28,
+ /* Bt878, Bt832, FI1246 tuner; no pci subsystem id
+ only internal line out: (4pin header) RGGL
+ Radio must be decoded by msp3410d (not routed through)*/
+ /*
+ .digital_mode = DIGITAL_MODE_CAMERA, todo!
+ */
+},{
+ /* Chris Willing <chris@vislab.usyd.edu.au> */
+ .name = "IVC-200",
+ .video_inputs = 1,
+ .audio_inputs = 0,
+ .tuner = -1,
+ .tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
+ .svhs = -1,
+ .gpiomask = 0xdf,
+ .muxsel = { 2 },
+ .pll = PLL_28,
},{
.name = "Grand X-Guard / Trust 814PCI",
.video_inputs = 16,
- .audio_inputs = 0,
- .tuner = -1,
- .svhs = -1,
+ .audio_inputs = 0,
+ .tuner = -1,
+ .svhs = -1,
.tuner_type = 4,
- .gpiomask2 = 0xff,
+ .tuner_addr = ADDR_UNSET,
+ .gpiomask2 = 0xff,
.muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 },
.muxsel_hook = xguard_muxsel,
.no_msp34xx = 1,
.no_tda9875 = 1,
- .no_tda7432 = 1,
+ .no_tda7432 = 1,
.pll = PLL_28,
},{
/* ---- card 0x68 ---------------------------------- */
.name = "Nebula Electronics DigiTV",
.video_inputs = 1,
- .tuner = -1,
+ .tuner = -1,
.svhs = -1,
.muxsel = { 2, 3, 1, 0},
.no_msp34xx = 1,
.no_tda7432 = 1,
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
.has_dvb = 1,
.no_gpioirq = 1,
},{
/* Jorge Boncompte - DTI2 <jorge@dti2.net> */
.name = "ProVideo PV143",
- .video_inputs = 4,
- .audio_inputs = 0,
- .tuner = -1,
- .svhs = -1,
- .gpiomask = 0,
- .muxsel = { 2, 3, 1, 0 },
- .audiomux = { 0 },
- .needs_tvaudio = 0,
- .no_msp34xx = 1,
- .pll = PLL_28,
- .tuner_type = -1,
+ .video_inputs = 4,
+ .audio_inputs = 0,
+ .tuner = -1,
+ .svhs = -1,
+ .gpiomask = 0,
+ .muxsel = { 2, 3, 1, 0 },
+ .audiomux = { 0 },
+ .needs_tvaudio = 0,
+ .no_msp34xx = 1,
+ .pll = PLL_28,
+ .tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
/* M.Klahr@phytec.de */
.name = "PHYTEC VD-009-X1 MiniDIN (bt878)",
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "PHYTEC VD-009-X1 Combi (bt878)",
.video_inputs = 4,
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
/* ---- card 0x6c ---------------------------------- */
.svhs = 9,
.gpiomask = 0x00,
.gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
- via the upper nibble of muxsel. here: used for
- xternal video-mux */
+ via the upper nibble of muxsel. here: used for
+ xternal video-mux */
.muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 },
.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
.name = "PHYTEC VD-009 Combi (bt878)",
.video_inputs = 10,
.svhs = 9,
.gpiomask = 0x00,
.gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio
- via the upper nibble of muxsel. here: used for
- xternal video-mux */
+ via the upper nibble of muxsel. here: used for
+ xternal video-mux */
.muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 },
.audiomux = { 0, 0, 0, 0, 0, 0 }, /* card has no audio */
.needs_tvaudio = 1,
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
- .name = "IVC-100",
- .video_inputs = 4,
- .audio_inputs = 0,
- .tuner = -1,
- .tuner_type = -1,
- .svhs = -1,
- .gpiomask = 0xdf,
- .muxsel = { 2, 3, 1, 0 },
- .pll = PLL_28,
+ .name = "IVC-100",
+ .video_inputs = 4,
+ .audio_inputs = 0,
+ .tuner = -1,
+ .tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
+ .svhs = -1,
+ .gpiomask = 0xdf,
+ .muxsel = { 2, 3, 1, 0 },
+ .pll = PLL_28,
},{
/* IVC-120G - Alan Garfield <alan@fromorbit.com> */
.name = "IVC-120G",
.audio_inputs = 0, /* card has no audio */
.tuner = -1, /* card has no tuner */
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
.svhs = -1, /* card has no svhs */
.needs_tvaudio = 0,
.no_msp34xx = 1,
.no_tda7432 = 1,
.gpiomask = 0x00,
.muxsel = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08,
- 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
+ 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 },
.muxsel_hook = ivc120_muxsel,
.pll = PLL_28,
},{
.svhs = 2,
.muxsel = { 2, 3, 1, 0},
.tuner_type = TUNER_PHILIPS_ATSC,
+ .tuner_addr = ADDR_UNSET,
.has_dvb = 1,
},{
.name = "Twinhan DST + clones",
.no_tda9875 = 1,
.no_tda7432 = 1,
.tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
.no_video = 1,
.has_dvb = 1,
},{
- .name = "Winfast VC100",
+ .name = "Winfast VC100",
.video_inputs = 3,
.audio_inputs = 0,
.svhs = 1,
- .tuner = -1, // no tuner
- .muxsel = { 3, 1, 1, 3}, // Vid In, SVid In, Vid over SVid in connector
- .no_msp34xx = 1,
- .no_tda9875 = 1,
- .no_tda7432 = 1,
- .tuner_type = TUNER_ABSENT,
+ .tuner = -1,
+ .muxsel = { 3, 1, 1, 3}, /* Vid In, SVid In, Vid over SVid in connector */
+ .no_msp34xx = 1,
+ .no_tda9875 = 1,
+ .no_tda7432 = 1,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
.pll = PLL_28,
},{
.name = "Teppro TEV-560/InterVision IV-560",
.audiomux = { 1, 1, 1, 1, 0},
.needs_tvaudio = 1,
.tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
.pll = PLL_35,
},{
/* ---- card 0x74 ---------------------------------- */
- .name = "SIMUS GVC1100",
- .video_inputs = 4,
- .audio_inputs = 0,
- .tuner = -1,
- .svhs = -1,
- .tuner_type = -1,
- .pll = PLL_28,
- .muxsel = { 2, 2, 2, 2},
- .gpiomask = 0x3F,
+ .name = "SIMUS GVC1100",
+ .video_inputs = 4,
+ .audio_inputs = 0,
+ .tuner = -1,
+ .svhs = -1,
+ .tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
+ .pll = PLL_28,
+ .muxsel = { 2, 2, 2, 2},
+ .gpiomask = 0x3F,
.muxsel_hook = gvc1100_muxsel,
},{
- /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
- .name = "NGS NGSTV+",
- .video_inputs = 3,
- .tuner = 0,
- .svhs = 2,
- .gpiomask = 0x008007,
- .muxsel = {2, 3, 0, 0},
- .audiomux = {0, 0, 0, 0, 0x000003, 0},
- .pll = PLL_28,
- .tuner_type = TUNER_PHILIPS_PAL,
- .has_remote = 1,
-},{
- /* http://linuxmedialabs.com */
- .name = "LMLBT4",
- .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
- .audio_inputs = 0,
- .tuner = -1,
- .svhs = -1,
- .muxsel = { 2, 3, 1, 0 },
- .no_msp34xx = 1,
- .no_tda9875 = 1,
- .no_tda7432 = 1,
- .needs_tvaudio = 0,
+ /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
+ .name = "NGS NGSTV+",
+ .video_inputs = 3,
+ .tuner = 0,
+ .svhs = 2,
+ .gpiomask = 0x008007,
+ .muxsel = {2, 3, 0, 0},
+ .audiomux = {0, 0, 0, 0, 0x000003, 0},
+ .pll = PLL_28,
+ .tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
+ .has_remote = 1,
+},{
+ /* http://linuxmedialabs.com */
+ .name = "LMLBT4",
+ .video_inputs = 4, /* IN1,IN2,IN3,IN4 */
+ .audio_inputs = 0,
+ .tuner = -1,
+ .svhs = -1,
+ .muxsel = { 2, 3, 1, 0 },
+ .no_msp34xx = 1,
+ .no_tda9875 = 1,
+ .no_tda7432 = 1,
+ .needs_tvaudio = 0,
+ .tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
/* Helmroos Harri <harri.helmroos@pp.inet.fi> */
.name = "Tekram M205 PRO",
.audio_inputs = 1,
.tuner = 0,
.tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
.svhs = 2,
.needs_tvaudio = 0,
.gpiomask = 0x68,
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
.has_remote = 1,
.has_radio = 1,
},{
.pll = PLL_28,
.needs_tvaudio = 0,
.muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
+ .tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
/* Spirit TV Tuner from http://spiritmodems.com.au */
/* Stafford Goodsell <surge@goliath.homeunix.org> */
.muxsel = { 2, 1, 1 },
.audiomux = { 0x02, 0x00, 0x00, 0x00, 0x00},
.tuner_type = TUNER_TEMIC_PAL,
+ .tuner_addr = ADDR_UNSET,
.no_msp34xx = 1,
.no_tda9875 = 1,
},{
/* Wolfram Joost <wojo@frokaschwei.de> */
- .name = "AVerMedia AVerTV DVB-T 771",
- .video_inputs = 2,
- .svhs = 1,
- .tuner = -1,
- .tuner_type = TUNER_ABSENT,
- .muxsel = { 3 , 3 },
- .no_msp34xx = 1,
- .no_tda9875 = 1,
- .no_tda7432 = 1,
- .pll = PLL_28,
- .has_dvb = 1,
- .no_gpioirq = 1,
- .has_remote = 1,
+ .name = "AVerMedia AVerTV DVB-T 771",
+ .video_inputs = 2,
+ .svhs = 1,
+ .tuner = -1,
+ .tuner_type = TUNER_ABSENT,
+ .tuner_addr = ADDR_UNSET,
+ .muxsel = { 3 , 3 },
+ .no_msp34xx = 1,
+ .no_tda9875 = 1,
+ .no_tda7432 = 1,
+ .pll = PLL_28,
+ .has_dvb = 1,
+ .no_gpioirq = 1,
+ .has_remote = 1,
},{
/* ---- card 0x7c ---------------------------------- */
/* Matt Jesson <dvb@jesson.eclipse.co.uk> */
.no_tda7432 = 1,
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
.has_dvb = 1,
.no_gpioirq = 1,
.has_remote = 1,
.svhs = -1,
.gpiomask = 0x0,
.muxsel = { 2, 2, 2, 2, 2, 2, 2, 2,
- 3, 3, 3, 3, 3, 3, 3, 3 },
+ 3, 3, 3, 3, 3, 3, 3, 3 },
.muxsel_hook = sigmaSQ_muxsel,
.audiomux = { 0 },
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
/* andre.schwarz@matrix-vision.de */
.name = "MATRIX Vision Sigma-SLC",
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
/* BTTV_APAC_VIEWCOMP */
/* Attila Kondoros <attila.kondoros@chello.hu> */
.needs_tvaudio = 0,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_PAL,
+ .tuner_addr = ADDR_UNSET,
.has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */
.has_radio = 1, /* not every card has radio */
},{
/* ---- card 0x80 ---------------------------------- */
/* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
- .name = "DVICO FusionHDTV DVB-T Lite",
+ .name = "DViCO FusionHDTV DVB-T Lite",
.tuner = -1,
.no_msp34xx = 1,
.no_tda9875 = 1,
.no_video = 1,
.has_dvb = 1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
},{
/* Steven <photon38@pchome.com.tw> */
.name = "V-Gear MyVCD",
.no_msp34xx = 1,
.pll = PLL_28,
.tuner_type = TUNER_PHILIPS_NTSC_M,
+ .tuner_addr = ADDR_UNSET,
.has_radio = 0,
- // .has_remote = 1,
},{
/* Rick C <cryptdragoon@gmail.com> */
- .name = "Super TV Tuner",
- .video_inputs = 4,
- .audio_inputs = 1,
- .tuner = 0,
- .svhs = 2,
- .muxsel = { 2, 3, 1, 0},
- .tuner_type = TUNER_PHILIPS_NTSC,
- .gpiomask = 0x008007,
- .audiomux = { 0, 0x000001,0,0, 0},
- .needs_tvaudio = 1,
- .has_radio = 1,
-},{
- /* Chris Fanning <video4linux@haydon.net> */
- .name = "Tibet Systems 'Progress DVR' CS16",
- .video_inputs = 16,
- .audio_inputs = 0,
- .tuner = -1,
- .svhs = -1,
- .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
- .pll = PLL_28,
- .no_msp34xx = 1,
- .no_tda9875 = 1,
- .no_tda7432 = 1,
- .tuner_type = -1,
- .muxsel_hook = tibetCS16_muxsel,
+ .name = "Super TV Tuner",
+ .video_inputs = 4,
+ .audio_inputs = 1,
+ .tuner = 0,
+ .svhs = 2,
+ .muxsel = { 2, 3, 1, 0},
+ .tuner_type = TUNER_PHILIPS_NTSC,
+ .tuner_addr = ADDR_UNSET,
+ .gpiomask = 0x008007,
+ .audiomux = { 0, 0x000001,0,0, 0},
+ .needs_tvaudio = 1,
+ .has_radio = 1,
+},{
+ /* Chris Fanning <video4linux@haydon.net> */
+ .name = "Tibet Systems 'Progress DVR' CS16",
+ .video_inputs = 16,
+ .audio_inputs = 0,
+ .tuner = -1,
+ .svhs = -1,
+ .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 },
+ .pll = PLL_28,
+ .no_msp34xx = 1,
+ .no_tda9875 = 1,
+ .no_tda7432 = 1,
+ .tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
+ .muxsel_hook = tibetCS16_muxsel,
},
{
/* Bill Brack <wbrack@mmm.com.hk> */
/*
- * Note that, because of the card's wiring, the "master"
- * BT878A chip (i.e. the one which controls the analog switch
- * and must use this card type) is the 2nd one detected. The
- * other 3 chips should use card type 0x85, whose description
- * follows this one. There is a EEPROM on the card (which is
- * connected to the I2C of one of those other chips), but is
- * not currently handled. There is also a facility for a
- * "monitor", which is also not currently implemented.
- */
- .name = "Kodicom 4400R (master)",
+ * Note that, because of the card's wiring, the "master"
+ * BT878A chip (i.e. the one which controls the analog switch
+ * and must use this card type) is the 2nd one detected. The
+ * other 3 chips should use card type 0x85, whose description
+ * follows this one. There is a EEPROM on the card (which is
+ * connected to the I2C of one of those other chips), but is
+ * not currently handled. There is also a facility for a
+ * "monitor", which is also not currently implemented.
+ */
+ .name = "Kodicom 4400R (master)",
.video_inputs = 16,
.audio_inputs = 0,
.tuner = -1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
.svhs = -1,
/* GPIO bits 0-9 used for analog switch:
- * 00 - 03: camera selector
- * 04 - 06: channel (controller) selector
- * 07: data (1->on, 0->off)
- * 08: strobe
- * 09: reset
- * bit 16 is input from sync separator for the channel
- */
+ * 00 - 03: camera selector
+ * 04 - 06: channel (controller) selector
+ * 07: data (1->on, 0->off)
+ * 08: strobe
+ * 09: reset
+ * bit 16 is input from sync separator for the channel
+ */
.gpiomask = 0x0003ff,
.no_gpioirq = 1,
.muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 },
{
/* Bill Brack <wbrack@mmm.com.hk> */
/* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
- * one which controls the analog switch, and must use the card type)
- * is the 2nd one detected. The other 3 chips should use this card
- * type
- */
+ * one which controls the analog switch, and must use the card type)
+ * is the 2nd one detected. The other 3 chips should use this card
+ * type
+ */
.name = "Kodicom 4400R (slave)",
.video_inputs = 16,
.audio_inputs = 0,
.tuner = -1,
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
.svhs = -1,
.gpiomask = 0x010000,
.no_gpioirq = 1,
.svhs = 2,
.muxsel = { 2, 3, 1, 0},
.tuner_type = -1,
+ .tuner_addr = ADDR_UNSET,
.pll = PLL_28,
+},
+{
+ /* ---- card 0x87---------------------------------- */
+ /* Michael Krufky <mkrufky@m1k.net> */
+ .name = "DViCO FusionHDTV 5 Lite",
+ .tuner = 0,
+ .tuner_type = TUNER_LG_TDVS_H062F,
+ .tuner_addr = ADDR_UNSET,
+ .video_inputs = 2,
+ .audio_inputs = 1,
+ .svhs = 2,
+ .muxsel = { 2, 3 },
+ .gpiomask = 0x00e00007,
+ .audiomux = { 0x00400005, 0, 0, 0, 0, 0 },
+ .no_msp34xx = 1,
+ .no_tda9875 = 1,
+ .no_tda7432 = 1,
+},{
+ /* ---- card 0x88---------------------------------- */
+ /* Mauro Carvalho Chehab <mchehab@brturbo.com.br> */
+ .name = "Acorp Y878F",
+ .video_inputs = 3,
+ .audio_inputs = 1,
+ .tuner = 0,
+ .svhs = 2,
+ .gpiomask = 0x01fe00,
+ .muxsel = { 2, 3, 1, 1},
+ .audiomux = { 0x001e00, 0, 0x018000, 0x014000, 0x002000, 0 },
+ .needs_tvaudio = 1,
+ .pll = PLL_28,
+ .tuner_type = TUNER_YMEC_TVF66T5_B_DFF,
+ .tuner_addr = 0xc1 >>1,
+ .has_radio = 1,
}};
static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
int tuner=-1,ttype;
gpio_inout(0xffffff, 0);
- udelay(8); // without this we would see the 0x1800 mask
+ udelay(8); /* without this we would see the 0x1800 mask */
gpio = gpio_read();
/* FIXME: must restore OUR_EN ??? */
- // all cards provide GPIO info, some have an additional eeprom
- // LR50: GPIO coding can be found lower right CP1 .. CP9
- // CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
- // GPIO14-12: n.c.
- // LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
-
- // lowest 3 bytes are remote control codes (no handshake needed)
- // xxxFFF: No remote control chip soldered
- // xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
- // Note: Some bits are Audio_Mask !
+ /* all cards provide GPIO info, some have an additional eeprom
+ * LR50: GPIO coding can be found lower right CP1 .. CP9
+ * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
+ * GPIO14-12: n.c.
+ * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
+ * lowest 3 bytes are remote control codes (no handshake needed)
+ * xxxFFF: No remote control chip soldered
+ * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
+ * Note: Some bits are Audio_Mask !
+ */
ttype=(gpio&0x0f0000)>>16;
switch(ttype) {
- case 0x0: tuner=2; // NTSC, e.g. TPI8NSR11P
+ case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */
break;
- case 0x2: tuner=39;// LG NTSC (newer TAPC series) TAPC-H701P
+ case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */
break;
- case 0x4: tuner=5; // Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216
+ case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
break;
- case 0x6: tuner=37; // LG PAL (newer TAPC series) TAPC-G702P
+ case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */
break;
- case 0xC: tuner=3; // Philips SECAM(+PAL) FQ1216ME or FI1216MF
+ case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
break;
default:
printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr);
has_remote = gpio & 0x800000;
has_radio = gpio & 0x400000;
- // unknown 0x200000;
- // unknown2 0x100000;
- is_capture_only = !(gpio & 0x008000); //GPIO15
+ /* unknown 0x200000;
+ * unknown2 0x100000; */
+ is_capture_only = !(gpio & 0x008000); /* GPIO15 */
has_tda9820_tda9821 = !(gpio & 0x004000);
- is_lr90 = !(gpio & 0x002000); // else LR26/LR50 (LR38/LR51 f. capture only)
- // gpio & 0x001000 // output bit for audio routing
+ is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
+ /*
+ * gpio & 0x001000 output bit for audio routing */
if(is_capture_only)
- tuner=4; // No tuner present
+ tuner=4; /* No tuner present */
printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio);
btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ",
is_capture_only?"yes":"no ");
- if(tuner!= -1) // only set if known tuner autodetected, else let insmod option through
+ if(tuner!= -1) /* only set if known tuner autodetected, else let insmod option through */
btv->tuner_type = tuner;
btv->has_radio = has_radio;
- // LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
- // LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
- // Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute
+ /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
+ * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
+ * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
if(has_tda9820_tda9821) btv->audio_hook = lt9415_audio;
- //todo: if(has_tda9874) btv->audio_hook = fv2000s_audio;
+ /* todo: if(has_tda9874) btv->audio_hook = fv2000s_audio; */
}
static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1,
btaor((2)<<5, ~(3<<5), BT848_IFORM);
gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]);
-#if 0
- /* svhs */
- /* wake chroma ADC */
- btand(~BT848_ADC_C_SLEEP, BT848_ADC);
- /* set to YC video */
- btor(BT848_CONTROL_COMP, BT848_E_CONTROL);
- btor(BT848_CONTROL_COMP, BT848_O_CONTROL);
-#else
/* composite */
/* set chroma ADC to sleep */
btor(BT848_ADC_C_SLEEP, BT848_ADC);
/* set to composite video */
btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
-#endif
/* switch sync drive off */
gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
case BTTV_AVDVBT_771:
btv->use_i2c_hw = 1;
break;
+ case BTTV_ADLINK_RTV24:
+ init_RTV24( btv );
+ break;
+
}
if (!bttv_tvcards[btv->c.type].has_dvb)
bttv_reset_audio(btv);
void __devinit bttv_init_card2(struct bttv *btv)
{
int tda9887;
+ int addr=ADDR_UNSET;
+
btv->tuner_type = -1;
if (BTTV_UNKNOWN == btv->c.type) {
case BTTV_KODICOM_4400R:
kodicom4400r_init(btv);
break;
- case BTTV_ADLINK_RTV24:
- init_RTV24(btv);
- break;
}
/* pll configuration */
btv->pll.pll_current = -1;
/* tuner configuration (from card list / autodetect / insmod option) */
- if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
+ if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
+ addr = bttv_tvcards[btv->c.type].tuner_addr;
+
+ if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
if(UNSET == btv->tuner_type)
- btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
+ btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
if (UNSET != tuner[btv->c.nr])
btv->tuner_type = tuner[btv->c.nr];
printk("bttv%d: using tuner=%d\n",btv->c.nr,btv->tuner_type);
if (btv->pinnacle_id != UNSET)
- bttv_call_i2c_clients(btv,AUDC_CONFIG_PINNACLE,
+ bttv_call_i2c_clients(btv, AUDC_CONFIG_PINNACLE,
&btv->pinnacle_id);
- if (btv->tuner_type != UNSET)
- bttv_call_i2c_clients(btv,TUNER_SET_TYPE,&btv->tuner_type);
+ if (btv->tuner_type != UNSET) {
+ struct tuner_setup tun_setup;
+
+ tun_setup.mode_mask = T_RADIO | T_ANALOG_TV | T_DIGITAL_TV;
+ tun_setup.type = btv->tuner_type;
+ tun_setup.addr = addr;
+
+ bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup);
+ }
+
btv->svhs = bttv_tvcards[btv->c.type].svhs;
if (svhs[btv->c.nr] != UNSET)
btv->svhs = svhs[btv->c.nr];
{
struct tveeprom tv;
- tveeprom_hauppauge_analog(&tv, eeprom_data);
+ tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data);
btv->tuner_type = tv.tuner_type;
btv->has_radio = tv.has_radio;
}
btv->mbox_csel = 1 << 10;
freq=88000/62.5;
- tea5757_write(btv, 5 * freq + 0x358); // write 0x1ed8
+ tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */
if (0x1ed8 == tea5757_read(btv)) {
printk("bttv%d: Terratec Active Radio Upgrade found.\n",
btv->c.nr);
case 0x0060:
case 0x0070:
btv->c.type = BTTV_OSPREY2x0;
- //enable output on select control lines
+ /* enable output on select control lines */
gpio_inout(0xffffff,0x000303);
break;
default:
TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
TUNER_PHILIPS_FM1216ME_MK3 };
-#if 0
-int tuner_0_fm_table[] = {
- PHILIPS_FR1236_NTSC, PHILIPS_FR1216_PAL,
- PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
- PHILIPS_FR1216_PAL, PHILIPS_FR1216_PAL,
- PHILIPS_FR1236_SECAM, PHILIPS_FR1236_SECAM,
- PHILIPS_FR1236_SECAM, PHILIPS_FR1216_PAL};
-#endif
static int tuner_1_table[] = {
TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL,
TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
TUNER_TEMIC_PAL, TUNER_TEMIC_PAL,
- TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, //TUNER_TEMIC_SECAM
+ TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
static void __devinit avermedia_eeprom(struct bttv *btv)
if (tuner_make == 4)
if(tuner_format == 0x09)
- tuner = TUNER_LG_NTSC_NEW_TAPC; // TAPC-G702P
+ tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=",
btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]);
/* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */
void bttv_tda9880_setnorm(struct bttv *btv, int norm)
{
- // fix up our card entry
+ /* fix up our card entry */
if(norm==VIDEO_MODE_NTSC) {
bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[0]=0x957fff;
bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x957fff;
bttv_tvcards[BTTV_VOODOOTV_FM].audiomux[4]=0x947fff;
dprintk("bttv_tda9880_setnorm to PAL\n");
}
- // set GPIO according
+ /* set GPIO according */
gpio_bits(bttv_tvcards[btv->c.type].gpiomask,
bttv_tvcards[btv->c.type].audiomux[btv->audio]);
}
static void __devinit boot_bt832(struct bttv *btv)
{
-#if 0 /* not working yet */
- int resetbit=0;
-
- switch (btv->c.type) {
- case BTTV_PXELVWPLTVPAK:
- resetbit = 0x400000;
- break;
- case BTTV_MODTEC_205:
- resetbit = 1<<9;
- break;
- default:
- BUG();
- }
-
- request_module("bt832");
- bttv_call_i2c_clients(btv, BT832_HEXDUMP, NULL);
-
- printk("bttv%d: Reset Bt832 [line=0x%x]\n",btv->c.nr,resetbit);
- gpio_write(0);
- gpio_inout(resetbit, resetbit);
- udelay(5);
- gpio_bits(resetbit, resetbit);
- udelay(5);
- gpio_bits(resetbit, 0);
- udelay(5);
-
- // bt832 on pixelview changes from i2c 0x8a to 0x88 after
- // being reset as above. So we must follow by this:
- bttv_call_i2c_clients(btv, BT832_REATTACH, NULL);
-#endif
}
/* ----------------------------------------------------------------------- */
printk(KERN_INFO "PXC200 Initialised.\n");
}
+
+
/* ----------------------------------------------------------------------- */
/*
* The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
* error. ERROR_CPLD_Check_Failed.
*/
/* ----------------------------------------------------------------------- */
-void init_RTV24(struct bttv *btv)
+void
+init_RTV24 (struct bttv *btv)
{
- u32 dataread;
- const long watchdog_value = 0x0E;
+ uint32_t dataRead = 0;
+ long watchdog_value = 0x0E;
- printk(KERN_INFO "bttv%d: Adlink RTV-24 initialisation in progress\n",
+ printk (KERN_INFO
+ "bttv%d: Adlink RTV-24 initialisation in progress ...\n",
btv->c.nr);
- btwrite(0x00c3feff, BT848_GPIO_OUT_EN);
+ btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
- btwrite(0 + watchdog_value, BT848_GPIO_DATA);
- msleep(1);
- btwrite(0x10 + watchdog_value, BT848_GPIO_DATA);
- msleep( 10 );
- btwrite(0 + watchdog_value, BT848_GPIO_DATA);
+ btwrite (0 + watchdog_value, BT848_GPIO_DATA);
+ msleep (1);
+ btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
+ msleep (10);
+ btwrite (0 + watchdog_value, BT848_GPIO_DATA);
- dataread = btread(BT848_GPIO_DATA);
+ dataRead = btread (BT848_GPIO_DATA);
- if (((dataread >> 18) & 0x01) != 0 || ((dataread >> 19) & 0x01) != 1) {
- printk(KERN_INFO "bttv%d: Adlink RTV-24 initialisation(1) "
- "ERROR_CPLD_Check_Failed (read %d)\n",
- btv->c.nr, dataread);
+ if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
+ printk (KERN_INFO
+ "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
+ btv->c.nr, dataRead);
}
- btwrite(0x4400 + watchdog_value, BT848_GPIO_DATA);
- msleep(10);
- btwrite(0x4410 + watchdog_value, BT848_GPIO_DATA);
- msleep(1);
- btwrite(watchdog_value, BT848_GPIO_DATA);
- msleep(1);
- dataread = btread(BT848_GPIO_DATA);
-
- if (((dataread >> 18) & 0x01) != 0 || ((dataread >> 19) & 0x01) != 0) {
- printk(KERN_INFO "bttv%d: Adlink RTV-24 initialisation(2) "
- "ERROR_CPLD_Check_Failed (read %d)\n",
- btv->c.nr, dataread);
+ btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
+ msleep (10);
+ btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
+ msleep (1);
+ btwrite (watchdog_value, BT848_GPIO_DATA);
+ msleep (1);
+ dataRead = btread (BT848_GPIO_DATA);
+
+ if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
+ printk (KERN_INFO
+ "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
+ btv->c.nr, dataRead);
+
return;
}
- printk(KERN_INFO "bttv%d: Adlink RTV-24 initialisation complete.\n",
- btv->c.nr);
+ printk (KERN_INFO
+ "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr);
}
+
+
/* ----------------------------------------------------------------------- */
/* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */
/*
udelay(10);
timeout= jiffies + HZ;
- // wait for DATA line to go low; error if it doesn't
+ /* wait for DATA line to go low; error if it doesn't */
while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout))
schedule();
if (bus_in(btv,btv->mbox_data)) {
{
dprintk("tea5757_set_freq %d\n",freq);
tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */
-#if 0
- /* breaks Miro PCTV */
- value = tea5757_read(btv);
- dprintk("bttv%d: tea5757 readback=0x%x\n",btv->c.nr,value);
-#endif
}
con = 0x300;
if (v->mode & VIDEO_SOUND_STEREO)
con = 0x200;
-// if (v->mode & VIDEO_SOUND_MONO)
-// con = 0x100;
+/* if (v->mode & VIDEO_SOUND_MONO)
+ * con = 0x100; */
gpio_bits(0x300, con);
} else {
v->mode = VIDEO_SOUND_STEREO |
{
unsigned int val, con;
-#if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
if (btv->radio_user)
return;
-#else
- if (btv->radio)
- return;
-#endif
val = gpio_read();
if (set) {
}
}
-// TDA9821 on TerraTV+ Bt848, Bt878
+/* TDA9821 on TerraTV+ Bt848, Bt878 */
static void
terratv_audio(struct bttv *btv, struct video_audio *v, int set)
{
{
unsigned int val = 0;
-#if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
if (btv->radio_user)
return;
-#else
- if (btv->radio)
- return;
-#endif
if (set) {
if (v->mode & VIDEO_SOUND_MONO) {
{
unsigned int val = 0xffff;
-#if BTTV_VERSION_CODE > KERNEL_VERSION(0,8,0)
if (btv->radio_user)
return;
-#else
- if (btv->radio)
- return;
-#endif
if (set) {
if (v->mode & VIDEO_SOUND_MONO) {
val = 0x0000;
}
if ((v->mode & (VIDEO_SOUND_LANG1 | VIDEO_SOUND_LANG2))
|| (v->mode & VIDEO_SOUND_STEREO)) {
- val = 0x1080; //-dk-???: 0x0880, 0x0080, 0x1800 ...
+ val = 0x1080; /*-dk-???: 0x0880, 0x0080, 0x1800 ... */
}
if (val != 0xffff) {
gpio_bits(0x1800, val);
{
unsigned int con = 0xffffff;
- //btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN);
+ /* btaor(0x1e0000, ~0x1e0000, BT848_GPIO_OUT_EN); */
if (set) {
- //btor(***, BT848_GPIO_OUT_EN);
+ /* btor(***, BT848_GPIO_OUT_EN); */
if (v->mode & VIDEO_SOUND_LANG1)
con = 0x00000000;
if (v->mode & VIDEO_SOUND_LANG2)
master[btv->c.nr+2] = btv;
}
-// The Grandtec X-Guard framegrabber card uses two Dual 4-channel
-// video multiplexers to provide up to 16 video inputs. These
-// multiplexers are controlled by the lower 8 GPIO pins of the
-// bt878. The multiplexers probably Pericom PI5V331Q or similar.
-
-// xxx0 is pin xxx of multiplexer U5,
-// yyy1 is pin yyy of multiplexer U2
+/* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
+ * video multiplexers to provide up to 16 video inputs. These
+ * multiplexers are controlled by the lower 8 GPIO pins of the
+ * bt878. The multiplexers probably Pericom PI5V331Q or similar.
+ * xxx0 is pin xxx of multiplexer U5,
+ * yyy1 is pin yyy of multiplexer U2
+ */
#define ENA0 0x01
#define ENB0 0x02
#define ENA1 0x04
static void ivc120_muxsel(struct bttv *btv, unsigned int input)
{
- // Simple maths
+ /* Simple maths */
int key = input % 4;
int matrix = input / 4;
dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
btv->c.nr, input, matrix, key);
- // Handles the input selection on the TDA8540's
+ /* Handles the input selection on the TDA8540's */
bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
((matrix == 3) ? (key | key << 2) : 0x00), 1);
bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
((matrix == 2) ? (key | key << 2) : 0x00), 1);
- // Handles the output enables on the TDA8540's
+ /* Handles the output enables on the TDA8540's */
bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
- ((matrix == 3) ? 0x03 : 0x00), 1); // 13 - 16
+ ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */
bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
- ((matrix == 0) ? 0x03 : 0x00), 1); // 1-4
+ ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */
bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
- ((matrix == 1) ? 0x03 : 0x00), 1); // 5-8
+ ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */
bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
- ((matrix == 2) ? 0x03 : 0x00), 1); // 9-12
+ ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */
- // Selects MUX0 for input on the 878
+ /* Selects MUX0 for input on the 878 */
btaor((0)<<5, ~(3<<5), BT848_IFORM);
}
latency = 0x0A;
#endif
-#if 0
- /* print which chipset we have */
- while ((dev = pci_find_class(PCI_CLASS_BRIDGE_HOST << 8,dev)))
- printk(KERN_INFO "bttv: Host bridge is %s\n",pci_name(dev));
-#endif
/* print warnings about any quirks found */
if (triton1)
printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n");
if (pcipci_fail) {
printk(KERN_WARNING "bttv: BT848 and your chipset may not work together.\n");
- if (UNSET == no_overlay) {
- printk(KERN_WARNING "bttv: going to disable overlay.\n");
+ if (!no_overlay) {
+ printk(KERN_WARNING "bttv: overlay will be disabled.\n");
no_overlay = 1;
+ } else {
+ printk(KERN_WARNING "bttv: overlay forced. Use this option at your own risk.\n");
}
}
if (UNSET != latency)