* 02110-1301, USA.
*/
+#include <media/v4l2-chip-ident.h>
#include "cx18-driver.h"
#include "cx18-io.h"
+#include "cx18-cards.h"
int cx18_av_write(struct cx18 *cx, u16 addr, u8 value)
{
or_value);
}
-/* ----------------------------------------------------------------------- */
-
-static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input,
- enum cx18_av_audio_input aud_input);
-static void log_audio_status(struct cx18 *cx);
-static void log_video_status(struct cx18 *cx);
-
-/* ----------------------------------------------------------------------- */
-
static void cx18_av_initialize(struct cx18 *cx)
{
struct cx18_av_state *state = &cx->av_state;
/* Set VGA_TRACK_RANGE to 0x20 */
cx18_av_and_or4(cx, CXADEC_DFE_CTRL2, 0xFFFF00FF, 0x00002000);
- /* Enable VBI capture */
- cx18_av_write4(cx, CXADEC_OUT_CTRL1, 0x4010253F);
- /* cx18_av_write4(cx, CXADEC_OUT_CTRL1, 0x4010253E); */
+ /*
+ * Initial VBI setup
+ * VIP-1.1, 10 bit mode, enable Raw, disable sliced,
+ * don't clamp raw samples when codes are in use, 1 byte user D-words,
+ * IDID0 has line #, RP code V bit transition on VBLANK, data during
+ * blanking intervals
+ */
+ cx18_av_write4(cx, CXADEC_OUT_CTRL1, 0x4013252e);
/* Set the video input.
The setting in MODE_CTRL gets lost when we do the above setup */
state->default_volume = ((state->default_volume / 2) + 23) << 9;
}
-/* ----------------------------------------------------------------------- */
+static int cx18_av_reset(struct v4l2_subdev *sd, u32 val)
+{
+ struct cx18 *cx = v4l2_get_subdevdata(sd);
+
+ cx18_av_initialize(cx);
+ return 0;
+}
+
+static int cx18_av_init(struct v4l2_subdev *sd, u32 val)
+{
+ struct cx18 *cx = v4l2_get_subdevdata(sd);
+
+ /*
+ * The crystal freq used in calculations in this driver will be
+ * 28.636360 MHz.
+ * Aim to run the PLLs' VCOs near 400 MHz to minimze errors.
+ */
+
+ /*
+ * VDCLK Integer = 0x0f, Post Divider = 0x04
+ * AIMCLK Integer = 0x0e, Post Divider = 0x16
+ */
+ cx18_av_write4(cx, CXADEC_PLL_CTRL1, 0x160e040f);
+
+ /* VDCLK Fraction = 0x2be2fe */
+ /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz before post divide */
+ cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, 0x002be2fe);
+
+ /* AIMCLK Fraction = 0x05227ad */
+ /* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz pre post-div*/
+ cx18_av_write4(cx, CXADEC_AUX_PLL_FRAC, 0x005227ad);
+
+ /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */
+ cx18_av_write(cx, CXADEC_I2S_MCLK, 0x56);
+ return 0;
+}
+
+static int cx18_av_load_fw(struct v4l2_subdev *sd)
+{
+ struct cx18_av_state *state = to_cx18_av_state(sd);
+ struct cx18 *cx = v4l2_get_subdevdata(sd);
+
+ if (!state->is_initialized) {
+ /* initialize on first use */
+ state->is_initialized = 1;
+ cx18_av_initialize(cx);
+ }
+ return 0;
+}
void cx18_av_std_setup(struct cx18 *cx)
{
struct cx18_av_state *state = &cx->av_state;
+ struct v4l2_subdev *sd = &state->sd;
v4l2_std_id std = state->std;
int hblank, hactive, burst, vblank, vactive, sc;
int vblank656, src_decimation;
cx18_av_write(cx, 0x49f, 0x14);
if (std & V4L2_STD_625_50) {
+ /* FIXME - revisit these for Sliced VBI */
hblank = 132;
hactive = 720;
burst = 93;
sc = 672351;
}
} else {
+ /*
+ * The following relationships of half line counts should hold:
+ * 525 = vsync + vactive + vblank656
+ * 12 = vblank656 - vblank
+ *
+ * vsync: always 6 half-lines of vsync pulses
+ * vactive: half lines of active video
+ * vblank656: half lines, after line 3/mid-266, of blanked video
+ * vblank: half lines, after line 9/272, of blanked video
+ *
+ * As far as I can tell:
+ * vblank656 starts counting from the falling edge of the first
+ * vsync pulse (start of line 4 or mid-266)
+ * vblank starts counting from the after the 6 vsync pulses and
+ * 6 or 5 equalization pulses (start of line 10 or 272)
+ *
+ * For 525 line systems the driver will extract VBI information
+ * from lines 10-21 and lines 273-284.
+ */
+ vblank656 = 38; /* lines 4 - 22 & 266 - 284 */
+ vblank = 26; /* lines 10 - 22 & 272 - 284 */
+ vactive = 481; /* lines 23 - 263 & 285 - 525 */
+
+ /*
+ * For a 13.5 Mpps clock and 15,734.26 Hz line rate, a line is
+ * is 858 pixels = 720 active + 138 blanking. The Hsync leading
+ * edge should happen 1.2 us * 13.5 Mpps ~= 16 pixels after the
+ * end of active video, leaving 122 pixels of hblank to ignore
+ * before active video starts.
+ */
hactive = 720;
hblank = 122;
- vactive = 487;
luma_lpf = 1;
uv_lpf = 1;
- vblank = 26;
- vblank656 = 26;
src_decimation = 0x21f;
if (std == V4L2_STD_PAL_60) {
pll_int = cx18_av_read(cx, 0x108);
pll_frac = cx18_av_read4(cx, 0x10c) & 0x1ffffff;
pll_post = cx18_av_read(cx, 0x109);
- CX18_DEBUG_INFO("PLL regs = int: %u, frac: %u, post: %u\n",
- pll_int, pll_frac, pll_post);
+ CX18_DEBUG_INFO_DEV(sd, "PLL regs = int: %u, frac: %u, post: %u\n",
+ pll_int, pll_frac, pll_post);
if (pll_post) {
int fin, fsc, pll;
pll = (28636360L * ((((u64)pll_int) << 25) + pll_frac)) >> 25;
pll /= pll_post;
- CX18_DEBUG_INFO("PLL = %d.%06d MHz\n",
- pll / 1000000, pll % 1000000);
- CX18_DEBUG_INFO("PLL/8 = %d.%06d MHz\n",
- pll / 8000000, (pll / 8) % 1000000);
+ CX18_DEBUG_INFO_DEV(sd, "PLL = %d.%06d MHz\n",
+ pll / 1000000, pll % 1000000);
+ CX18_DEBUG_INFO_DEV(sd, "PLL/8 = %d.%06d MHz\n",
+ pll / 8000000, (pll / 8) % 1000000);
fin = ((u64)src_decimation * pll) >> 12;
- CX18_DEBUG_INFO("ADC Sampling freq = %d.%06d MHz\n",
- fin / 1000000, fin % 1000000);
+ CX18_DEBUG_INFO_DEV(sd, "ADC Sampling freq = %d.%06d MHz\n",
+ fin / 1000000, fin % 1000000);
fsc = (((u64)sc) * pll) >> 24L;
- CX18_DEBUG_INFO("Chroma sub-carrier freq = %d.%06d MHz\n",
- fsc / 1000000, fsc % 1000000);
-
- CX18_DEBUG_INFO("hblank %i, hactive %i, "
- "vblank %i , vactive %i, vblank656 %i, src_dec %i,"
- "burst 0x%02x, luma_lpf %i, uv_lpf %i, comb 0x%02x,"
- " sc 0x%06x\n",
- hblank, hactive, vblank, vactive, vblank656,
- src_decimation, burst, luma_lpf, uv_lpf, comb, sc);
+ CX18_DEBUG_INFO_DEV(sd,
+ "Chroma sub-carrier freq = %d.%06d MHz\n",
+ fsc / 1000000, fsc % 1000000);
+
+ CX18_DEBUG_INFO_DEV(sd, "hblank %i, hactive %i, vblank %i, "
+ "vactive %i, vblank656 %i, src_dec %i, "
+ "burst 0x%02x, luma_lpf %i, uv_lpf %i, "
+ "comb 0x%02x, sc 0x%06x\n",
+ hblank, hactive, vblank, vactive, vblank656,
+ src_decimation, burst, luma_lpf, uv_lpf,
+ comb, sc);
}
/* Sets horizontal blanking delay and active lines */
cx18_av_write(cx, 0x47d, 0xff & sc >> 8);
cx18_av_write(cx, 0x47e, 0xff & sc >> 16);
- /* Sets VBI parameters */
if (std & V4L2_STD_625_50) {
- cx18_av_write(cx, 0x47f, 0x01);
- state->vbi_line_offset = 5;
+ state->slicer_line_delay = 1;
+ state->slicer_line_offset = (6 + state->slicer_line_delay - 2);
} else {
- cx18_av_write(cx, 0x47f, 0x00);
- state->vbi_line_offset = 8;
+ state->slicer_line_delay = 0;
+ state->slicer_line_offset = (10 + state->slicer_line_delay - 2);
}
+ cx18_av_write(cx, 0x47f, state->slicer_line_delay);
}
-/* ----------------------------------------------------------------------- */
-
static void input_change(struct cx18 *cx)
{
struct cx18_av_state *state = &cx->av_state;
}
}
+static int cx18_av_s_frequency(struct v4l2_subdev *sd,
+ struct v4l2_frequency *freq)
+{
+ struct cx18 *cx = v4l2_get_subdevdata(sd);
+ input_change(cx);
+ return 0;
+}
+
static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input,
enum cx18_av_audio_input aud_input)
{
struct cx18_av_state *state = &cx->av_state;
+ struct v4l2_subdev *sd = &state->sd;
u8 is_composite = (vid_input >= CX18_AV_COMPOSITE1 &&
vid_input <= CX18_AV_COMPOSITE8);
u8 reg;
u8 v;
- CX18_DEBUG_INFO("decoder set video input %d, audio input %d\n",
- vid_input, aud_input);
+ CX18_DEBUG_INFO_DEV(sd, "decoder set video input %d, audio input %d\n",
+ vid_input, aud_input);
if (is_composite) {
reg = 0xf0 + (vid_input - CX18_AV_COMPOSITE1);
luma > CX18_AV_SVIDEO_LUMA8 ||
chroma < CX18_AV_SVIDEO_CHROMA4 ||
chroma > CX18_AV_SVIDEO_CHROMA8) {
- CX18_ERR("0x%04x is not a valid video input!\n",
- vid_input);
+ CX18_ERR_DEV(sd, "0x%04x is not a valid video input!\n",
+ vid_input);
return -EINVAL;
}
reg = 0xf0 + ((luma - CX18_AV_SVIDEO_LUMA1) >> 4);
case CX18_AV_AUDIO8: reg &= ~0xc0; reg |= 0x40; break;
default:
- CX18_ERR("0x%04x is not a valid audio input!\n", aud_input);
+ CX18_ERR_DEV(sd, "0x%04x is not a valid audio input!\n",
+ aud_input);
return -EINVAL;
}
return 0;
}
-/* ----------------------------------------------------------------------- */
+static int cx18_av_s_video_routing(struct v4l2_subdev *sd,
+ u32 input, u32 output, u32 config)
+{
+ struct cx18_av_state *state = to_cx18_av_state(sd);
+ struct cx18 *cx = v4l2_get_subdevdata(sd);
+ return set_input(cx, input, state->aud_input);
+}
-static int set_v4lstd(struct cx18 *cx)
+static int cx18_av_s_audio_routing(struct v4l2_subdev *sd,
+ u32 input, u32 output, u32 config)
{
- struct cx18_av_state *state = &cx->av_state;
+ struct cx18_av_state *state = to_cx18_av_state(sd);
+ struct cx18 *cx = v4l2_get_subdevdata(sd);
+ return set_input(cx, state->vid_input, input);
+}
+
+static int cx18_av_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
+{
+ struct cx18_av_state *state = to_cx18_av_state(sd);
+ struct cx18 *cx = v4l2_get_subdevdata(sd);
+ u8 vpres;
+ u8 mode;
+ int val = 0;
+
+ if (state->radio)
+ return 0;
+
+ vpres = cx18_av_read(cx, 0x40e) & 0x20;
+ vt->signal = vpres ? 0xffff : 0x0;
+
+ vt->capability |=
+ V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 |
+ V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP;
+
+ mode = cx18_av_read(cx, 0x804);
+
+ /* get rxsubchans and audmode */
+ if ((mode & 0xf) == 1)
+ val |= V4L2_TUNER_SUB_STEREO;
+ else
+ val |= V4L2_TUNER_SUB_MONO;
+
+ if (mode == 2 || mode == 4)
+ val = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
+
+ if (mode & 0x10)
+ val |= V4L2_TUNER_SUB_SAP;
+
+ vt->rxsubchans = val;
+ vt->audmode = state->audmode;
+ return 0;
+}
+
+static int cx18_av_s_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
+{
+ struct cx18_av_state *state = to_cx18_av_state(sd);
+ struct cx18 *cx = v4l2_get_subdevdata(sd);
+ u8 v;
+
+ if (state->radio)
+ return 0;
+
+ v = cx18_av_read(cx, 0x809);
+ v &= ~0xf;
+
+ switch (vt->audmode) {
+ case V4L2_TUNER_MODE_MONO:
+ /* mono -> mono
+ stereo -> mono
+ bilingual -> lang1 */
+ break;
+ case V4L2_TUNER_MODE_STEREO:
+ case V4L2_TUNER_MODE_LANG1:
+ /* mono -> mono
+ stereo -> stereo
+ bilingual -> lang1 */
+ v |= 0x4;
+ break;
+ case V4L2_TUNER_MODE_LANG1_LANG2:
+ /* mono -> mono
+ stereo -> stereo
+ bilingual -> lang1/lang2 */
+ v |= 0x7;
+ break;
+ case V4L2_TUNER_MODE_LANG2:
+ /* mono -> mono
+ stereo -> stereo
+ bilingual -> lang2 */
+ v |= 0x1;
+ break;
+ default:
+ return -EINVAL;
+ }
+ cx18_av_write_expect(cx, 0x809, v, v, 0xff);
+ state->audmode = vt->audmode;
+ return 0;
+}
+
+static int cx18_av_s_std(struct v4l2_subdev *sd, v4l2_std_id norm)
+{
+ struct cx18_av_state *state = to_cx18_av_state(sd);
+ struct cx18 *cx = v4l2_get_subdevdata(sd);
+
u8 fmt = 0; /* zero is autodetect */
u8 pal_m = 0;
+ if (state->radio == 0 && state->std == norm)
+ return 0;
+
+ state->radio = 0;
+ state->std = norm;
+
/* First tests should be against specific std */
if (state->std == V4L2_STD_NTSC_M_JP) {
fmt = 0x2;
fmt = 0xc;
}
- CX18_DEBUG_INFO("changing video std to fmt %i\n", fmt);
+ CX18_DEBUG_INFO_DEV(sd, "changing video std to fmt %i\n", fmt);
/* Follow step 9 of section 3.16 in the cx18_av datasheet.
Without this PAL may display a vertical ghosting effect.
return 0;
}
-/* ----------------------------------------------------------------------- */
+static int cx18_av_s_radio(struct v4l2_subdev *sd)
+{
+ struct cx18_av_state *state = to_cx18_av_state(sd);
+ state->radio = 1;
+ return 0;
+}
-static int set_v4lctrl(struct cx18 *cx, struct v4l2_control *ctrl)
+static int cx18_av_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
+ struct cx18 *cx = v4l2_get_subdevdata(sd);
+
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
if (ctrl->value < 0 || ctrl->value > 255) {
- CX18_ERR("invalid brightness setting %d\n",
- ctrl->value);
+ CX18_ERR_DEV(sd, "invalid brightness setting %d\n",
+ ctrl->value);
return -ERANGE;
}
case V4L2_CID_CONTRAST:
if (ctrl->value < 0 || ctrl->value > 127) {
- CX18_ERR("invalid contrast setting %d\n",
- ctrl->value);
+ CX18_ERR_DEV(sd, "invalid contrast setting %d\n",
+ ctrl->value);
return -ERANGE;
}
case V4L2_CID_SATURATION:
if (ctrl->value < 0 || ctrl->value > 127) {
- CX18_ERR("invalid saturation setting %d\n",
- ctrl->value);
+ CX18_ERR_DEV(sd, "invalid saturation setting %d\n",
+ ctrl->value);
return -ERANGE;
}
break;
case V4L2_CID_HUE:
- if (ctrl->value < -127 || ctrl->value > 127) {
- CX18_ERR("invalid hue setting %d\n", ctrl->value);
+ if (ctrl->value < -128 || ctrl->value > 127) {
+ CX18_ERR_DEV(sd, "invalid hue setting %d\n",
+ ctrl->value);
return -ERANGE;
}
case V4L2_CID_AUDIO_TREBLE:
case V4L2_CID_AUDIO_BALANCE:
case V4L2_CID_AUDIO_MUTE:
- return cx18_av_audio(cx, VIDIOC_S_CTRL, ctrl);
+ return cx18_av_audio_s_ctrl(cx, ctrl);
default:
return -EINVAL;
}
-
return 0;
}
-static int get_v4lctrl(struct cx18 *cx, struct v4l2_control *ctrl)
+static int cx18_av_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
{
+ struct cx18 *cx = v4l2_get_subdevdata(sd);
+
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
ctrl->value = (s8)cx18_av_read(cx, 0x414) + 128;
case V4L2_CID_AUDIO_TREBLE:
case V4L2_CID_AUDIO_BALANCE:
case V4L2_CID_AUDIO_MUTE:
- return cx18_av_audio(cx, VIDIOC_G_CTRL, ctrl);
+ return cx18_av_audio_g_ctrl(cx, ctrl);
default:
return -EINVAL;
}
-
return 0;
}
-/* ----------------------------------------------------------------------- */
-
-static int get_v4lfmt(struct cx18 *cx, struct v4l2_format *fmt)
+static int cx18_av_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
{
- switch (fmt->type) {
- case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
- return cx18_av_vbi(cx, VIDIOC_G_FMT, fmt);
+ struct cx18_av_state *state = to_cx18_av_state(sd);
+
+ switch (qc->id) {
+ case V4L2_CID_BRIGHTNESS:
+ return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
+ case V4L2_CID_CONTRAST:
+ case V4L2_CID_SATURATION:
+ return v4l2_ctrl_query_fill(qc, 0, 127, 1, 64);
+ case V4L2_CID_HUE:
+ return v4l2_ctrl_query_fill(qc, -128, 127, 1, 0);
+ default:
+ break;
+ }
+
+ switch (qc->id) {
+ case V4L2_CID_AUDIO_VOLUME:
+ return v4l2_ctrl_query_fill(qc, 0, 65535,
+ 65535 / 100, state->default_volume);
+ case V4L2_CID_AUDIO_MUTE:
+ return v4l2_ctrl_query_fill(qc, 0, 1, 1, 0);
+ case V4L2_CID_AUDIO_BALANCE:
+ case V4L2_CID_AUDIO_BASS:
+ case V4L2_CID_AUDIO_TREBLE:
+ return v4l2_ctrl_query_fill(qc, 0, 65535, 65535 / 100, 32768);
default:
return -EINVAL;
}
+ return -EINVAL;
+}
- return 0;
+static int cx18_av_g_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
+{
+ struct cx18 *cx = v4l2_get_subdevdata(sd);
+
+ return cx18_av_vbi_g_fmt(cx, fmt);
}
-static int set_v4lfmt(struct cx18 *cx, struct v4l2_format *fmt)
+static int cx18_av_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
{
- struct cx18_av_state *state = &cx->av_state;
+ struct cx18_av_state *state = to_cx18_av_state(sd);
+ struct cx18 *cx = v4l2_get_subdevdata(sd);
+
struct v4l2_pix_format *pix;
int HSC, VSC, Vsrc, Hsrc, filter, Vlines;
int is_50Hz = !(state->std & V4L2_STD_525_60);
Hsrc = (cx18_av_read(cx, 0x472) & 0x3f) << 4;
Hsrc |= (cx18_av_read(cx, 0x471) & 0xf0) >> 4;
- Vlines = pix->height + (is_50Hz ? 4 : 7);
-
+ /*
+ * This adjustment reflects the excess of vactive, set in
+ * cx18_av_std_setup(), above standard values:
+ *
+ * 480 + 1 for 60 Hz systems
+ * 576 + 4 for 50 Hz systems
+ */
+ Vlines = pix->height + (is_50Hz ? 4 : 1);
+
+ /*
+ * Invalid height and width scaling requests are:
+ * 1. width less than 1/16 of the source width
+ * 2. width greater than the source width
+ * 3. height less than 1/8 of the source height
+ * 4. height greater than the source height
+ */
if ((pix->width * 16 < Hsrc) || (Hsrc < pix->width) ||
(Vlines * 8 < Vsrc) || (Vsrc < Vlines)) {
- CX18_ERR("%dx%d is not a valid size!\n",
- pix->width, pix->height);
+ CX18_ERR_DEV(sd, "%dx%d is not a valid size!\n",
+ pix->width, pix->height);
return -ERANGE;
}
else
filter = 3;
- CX18_DEBUG_INFO("decoder set size %dx%d -> scale %ux%u\n",
- pix->width, pix->height, HSC, VSC);
+ CX18_DEBUG_INFO_DEV(sd,
+ "decoder set size %dx%d -> scale %ux%u\n",
+ pix->width, pix->height, HSC, VSC);
/* HSCALE=HSC */
cx18_av_write(cx, 0x418, HSC & 0xff);
break;
case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
- return cx18_av_vbi(cx, VIDIOC_S_FMT, fmt);
+ return cx18_av_vbi_s_fmt(cx, fmt);
case V4L2_BUF_TYPE_VBI_CAPTURE:
- return cx18_av_vbi(cx, VIDIOC_S_FMT, fmt);
+ return cx18_av_vbi_s_fmt(cx, fmt);
default:
return -EINVAL;
}
-
return 0;
}
-/* ----------------------------------------------------------------------- */
-
-int cx18_av_cmd(struct cx18 *cx, unsigned int cmd, void *arg)
+static int cx18_av_s_stream(struct v4l2_subdev *sd, int enable)
{
- struct cx18_av_state *state = &cx->av_state;
- struct v4l2_tuner *vt = arg;
- struct v4l2_routing *route = arg;
-
- /* ignore these commands */
- switch (cmd) {
- case TUNER_SET_TYPE_ADDR:
- return 0;
- }
-
- if (!state->is_initialized) {
- CX18_DEBUG_INFO("cmd %08x triggered fw load\n", cmd);
- /* initialize on first use */
- state->is_initialized = 1;
- cx18_av_initialize(cx);
- }
-
- switch (cmd) {
- case VIDIOC_INT_DECODE_VBI_LINE:
- return cx18_av_vbi(cx, cmd, arg);
-
- case VIDIOC_INT_AUDIO_CLOCK_FREQ:
- return cx18_av_audio(cx, cmd, arg);
+ struct cx18 *cx = v4l2_get_subdevdata(sd);
- case VIDIOC_STREAMON:
- CX18_DEBUG_INFO("enable output\n");
+ CX18_DEBUG_INFO_DEV(sd, "%s output\n", enable ? "enable" : "disable");
+ if (enable) {
cx18_av_write(cx, 0x115, 0x8c);
cx18_av_write(cx, 0x116, 0x07);
- break;
-
- case VIDIOC_STREAMOFF:
- CX18_DEBUG_INFO("disable output\n");
+ } else {
cx18_av_write(cx, 0x115, 0x00);
cx18_av_write(cx, 0x116, 0x00);
- break;
-
- case VIDIOC_LOG_STATUS:
- log_video_status(cx);
- log_audio_status(cx);
- break;
-
- case VIDIOC_G_CTRL:
- return get_v4lctrl(cx, (struct v4l2_control *)arg);
-
- case VIDIOC_S_CTRL:
- return set_v4lctrl(cx, (struct v4l2_control *)arg);
-
- case VIDIOC_QUERYCTRL:
- {
- struct v4l2_queryctrl *qc = arg;
-
- switch (qc->id) {
- case V4L2_CID_BRIGHTNESS:
- case V4L2_CID_CONTRAST:
- case V4L2_CID_SATURATION:
- case V4L2_CID_HUE:
- return v4l2_ctrl_query_fill_std(qc);
- default:
- break;
- }
-
- switch (qc->id) {
- case V4L2_CID_AUDIO_VOLUME:
- return v4l2_ctrl_query_fill(qc, 0, 65535,
- 65535 / 100, state->default_volume);
- case V4L2_CID_AUDIO_MUTE:
- case V4L2_CID_AUDIO_BALANCE:
- case V4L2_CID_AUDIO_BASS:
- case V4L2_CID_AUDIO_TREBLE:
- return v4l2_ctrl_query_fill_std(qc);
- default:
- return -EINVAL;
- }
- return -EINVAL;
}
-
- case VIDIOC_G_STD:
- *(v4l2_std_id *)arg = state->std;
- break;
-
- case VIDIOC_S_STD:
- if (state->radio == 0 && state->std == *(v4l2_std_id *)arg)
- return 0;
- state->radio = 0;
- state->std = *(v4l2_std_id *)arg;
- return set_v4lstd(cx);
-
- case AUDC_SET_RADIO:
- state->radio = 1;
- break;
-
- case VIDIOC_INT_G_VIDEO_ROUTING:
- route->input = state->vid_input;
- route->output = 0;
- break;
-
- case VIDIOC_INT_S_VIDEO_ROUTING:
- return set_input(cx, route->input, state->aud_input);
-
- case VIDIOC_INT_G_AUDIO_ROUTING:
- route->input = state->aud_input;
- route->output = 0;
- break;
-
- case VIDIOC_INT_S_AUDIO_ROUTING:
- return set_input(cx, state->vid_input, route->input);
-
- case VIDIOC_S_FREQUENCY:
- input_change(cx);
- break;
-
- case VIDIOC_G_TUNER:
- {
- u8 vpres = cx18_av_read(cx, 0x40e) & 0x20;
- u8 mode;
- int val = 0;
-
- if (state->radio)
- break;
-
- vt->signal = vpres ? 0xffff : 0x0;
-
- vt->capability |=
- V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 |
- V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP;
-
- mode = cx18_av_read(cx, 0x804);
-
- /* get rxsubchans and audmode */
- if ((mode & 0xf) == 1)
- val |= V4L2_TUNER_SUB_STEREO;
- else
- val |= V4L2_TUNER_SUB_MONO;
-
- if (mode == 2 || mode == 4)
- val = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
-
- if (mode & 0x10)
- val |= V4L2_TUNER_SUB_SAP;
-
- vt->rxsubchans = val;
- vt->audmode = state->audmode;
- break;
- }
-
- case VIDIOC_S_TUNER:
- {
- u8 v;
-
- if (state->radio)
- break;
-
- v = cx18_av_read(cx, 0x809);
- v &= ~0xf;
-
- switch (vt->audmode) {
- case V4L2_TUNER_MODE_MONO:
- /* mono -> mono
- stereo -> mono
- bilingual -> lang1 */
- break;
- case V4L2_TUNER_MODE_STEREO:
- case V4L2_TUNER_MODE_LANG1:
- /* mono -> mono
- stereo -> stereo
- bilingual -> lang1 */
- v |= 0x4;
- break;
- case V4L2_TUNER_MODE_LANG1_LANG2:
- /* mono -> mono
- stereo -> stereo
- bilingual -> lang1/lang2 */
- v |= 0x7;
- break;
- case V4L2_TUNER_MODE_LANG2:
- /* mono -> mono
- stereo -> stereo
- bilingual -> lang2 */
- v |= 0x1;
- break;
- default:
- return -EINVAL;
- }
- cx18_av_write_expect(cx, 0x809, v, v, 0xff);
- state->audmode = vt->audmode;
- break;
- }
-
- case VIDIOC_G_FMT:
- return get_v4lfmt(cx, (struct v4l2_format *)arg);
-
- case VIDIOC_S_FMT:
- return set_v4lfmt(cx, (struct v4l2_format *)arg);
-
- case VIDIOC_INT_RESET:
- cx18_av_initialize(cx);
- break;
-
- default:
- return -EINVAL;
- }
-
return 0;
}
-/* ----------------------------------------------------------------------- */
-
-/* ----------------------------------------------------------------------- */
-
static void log_video_status(struct cx18 *cx)
{
static const char *const fmt_strs[] = {
};
struct cx18_av_state *state = &cx->av_state;
+ struct v4l2_subdev *sd = &state->sd;
u8 vidfmt_sel = cx18_av_read(cx, 0x400) & 0xf;
u8 gen_stat1 = cx18_av_read(cx, 0x40d);
u8 gen_stat2 = cx18_av_read(cx, 0x40e);
int vid_input = state->vid_input;
- CX18_INFO("Video signal: %spresent\n",
- (gen_stat2 & 0x20) ? "" : "not ");
- CX18_INFO("Detected format: %s\n",
- fmt_strs[gen_stat1 & 0xf]);
+ CX18_INFO_DEV(sd, "Video signal: %spresent\n",
+ (gen_stat2 & 0x20) ? "" : "not ");
+ CX18_INFO_DEV(sd, "Detected format: %s\n",
+ fmt_strs[gen_stat1 & 0xf]);
- CX18_INFO("Specified standard: %s\n",
- vidfmt_sel ? fmt_strs[vidfmt_sel] : "automatic detection");
+ CX18_INFO_DEV(sd, "Specified standard: %s\n",
+ vidfmt_sel ? fmt_strs[vidfmt_sel]
+ : "automatic detection");
if (vid_input >= CX18_AV_COMPOSITE1 &&
vid_input <= CX18_AV_COMPOSITE8) {
- CX18_INFO("Specified video input: Composite %d\n",
- vid_input - CX18_AV_COMPOSITE1 + 1);
+ CX18_INFO_DEV(sd, "Specified video input: Composite %d\n",
+ vid_input - CX18_AV_COMPOSITE1 + 1);
} else {
- CX18_INFO("Specified video input: S-Video (Luma In%d, Chroma In%d)\n",
- (vid_input & 0xf0) >> 4, (vid_input & 0xf00) >> 8);
+ CX18_INFO_DEV(sd, "Specified video input: "
+ "S-Video (Luma In%d, Chroma In%d)\n",
+ (vid_input & 0xf0) >> 4,
+ (vid_input & 0xf00) >> 8);
}
- CX18_INFO("Specified audioclock freq: %d Hz\n", state->audclk_freq);
+ CX18_INFO_DEV(sd, "Specified audioclock freq: %d Hz\n",
+ state->audclk_freq);
}
-/* ----------------------------------------------------------------------- */
-
static void log_audio_status(struct cx18 *cx)
{
struct cx18_av_state *state = &cx->av_state;
+ struct v4l2_subdev *sd = &state->sd;
u8 download_ctl = cx18_av_read(cx, 0x803);
u8 mod_det_stat0 = cx18_av_read(cx, 0x804);
u8 mod_det_stat1 = cx18_av_read(cx, 0x805);
case 0xfe: p = "forced mode"; break;
default: p = "not defined"; break;
}
- CX18_INFO("Detected audio mode: %s\n", p);
+ CX18_INFO_DEV(sd, "Detected audio mode: %s\n", p);
switch (mod_det_stat1) {
case 0x00: p = "not defined"; break;
case 0xff: p = "no detected audio standard"; break;
default: p = "not defined"; break;
}
- CX18_INFO("Detected audio standard: %s\n", p);
- CX18_INFO("Audio muted: %s\n",
- (mute_ctl & 0x2) ? "yes" : "no");
- CX18_INFO("Audio microcontroller: %s\n",
- (download_ctl & 0x10) ? "running" : "stopped");
+ CX18_INFO_DEV(sd, "Detected audio standard: %s\n", p);
+ CX18_INFO_DEV(sd, "Audio muted: %s\n",
+ (mute_ctl & 0x2) ? "yes" : "no");
+ CX18_INFO_DEV(sd, "Audio microcontroller: %s\n",
+ (download_ctl & 0x10) ? "running" : "stopped");
switch (audio_config >> 4) {
case 0x00: p = "undefined"; break;
case 0x0f: p = "automatic detection"; break;
default: p = "undefined"; break;
}
- CX18_INFO("Configured audio standard: %s\n", p);
+ CX18_INFO_DEV(sd, "Configured audio standard: %s\n", p);
if ((audio_config >> 4) < 0xF) {
switch (audio_config & 0xF) {
case 0x07: p = "DUAL3 (AB)"; break;
default: p = "undefined";
}
- CX18_INFO("Configured audio mode: %s\n", p);
+ CX18_INFO_DEV(sd, "Configured audio mode: %s\n", p);
} else {
switch (audio_config & 0xF) {
case 0x00: p = "BG"; break;
case 0x0f: p = "automatic standard and mode detection"; break;
default: p = "undefined"; break;
}
- CX18_INFO("Configured audio system: %s\n", p);
+ CX18_INFO_DEV(sd, "Configured audio system: %s\n", p);
}
if (aud_input)
- CX18_INFO("Specified audio input: Tuner (In%d)\n",
- aud_input);
+ CX18_INFO_DEV(sd, "Specified audio input: Tuner (In%d)\n",
+ aud_input);
else
- CX18_INFO("Specified audio input: External\n");
+ CX18_INFO_DEV(sd, "Specified audio input: External\n");
switch (pref_mode & 0xf) {
case 0: p = "mono/language A"; break;
case 7: p = "language AB"; break;
default: p = "undefined"; break;
}
- CX18_INFO("Preferred audio mode: %s\n", p);
+ CX18_INFO_DEV(sd, "Preferred audio mode: %s\n", p);
if ((audio_config & 0xf) == 0xf) {
switch ((afc0 >> 3) & 0x1) {
case 0: p = "system DK"; break;
case 1: p = "system L"; break;
}
- CX18_INFO("Selected 65 MHz format: %s\n", p);
+ CX18_INFO_DEV(sd, "Selected 65 MHz format: %s\n", p);
switch (afc0 & 0x7) {
case 0: p = "Chroma"; break;
case 4: p = "autodetect"; break;
default: p = "undefined"; break;
}
- CX18_INFO("Selected 45 MHz format: %s\n", p);
+ CX18_INFO_DEV(sd, "Selected 45 MHz format: %s\n", p);
}
}
+
+static int cx18_av_log_status(struct v4l2_subdev *sd)
+{
+ struct cx18 *cx = v4l2_get_subdevdata(sd);
+ log_video_status(cx);
+ log_audio_status(cx);
+ return 0;
+}
+
+static inline int cx18_av_dbg_match(const struct v4l2_dbg_match *match)
+{
+ return match->type == V4L2_CHIP_MATCH_HOST && match->addr == 1;
+}
+
+static int cx18_av_g_chip_ident(struct v4l2_subdev *sd,
+ struct v4l2_dbg_chip_ident *chip)
+{
+ struct cx18_av_state *state = to_cx18_av_state(sd);
+
+ if (cx18_av_dbg_match(&chip->match)) {
+ chip->ident = state->id;
+ chip->revision = state->rev;
+ }
+ return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int cx18_av_g_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct cx18 *cx = v4l2_get_subdevdata(sd);
+
+ if (!cx18_av_dbg_match(®->match))
+ return -EINVAL;
+ if ((reg->reg & 0x3) != 0)
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ reg->size = 4;
+ reg->val = cx18_av_read4(cx, reg->reg & 0x00000ffc);
+ return 0;
+}
+
+static int cx18_av_s_register(struct v4l2_subdev *sd,
+ struct v4l2_dbg_register *reg)
+{
+ struct cx18 *cx = v4l2_get_subdevdata(sd);
+
+ if (!cx18_av_dbg_match(®->match))
+ return -EINVAL;
+ if ((reg->reg & 0x3) != 0)
+ return -EINVAL;
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+ cx18_av_write4(cx, reg->reg & 0x00000ffc, reg->val);
+ return 0;
+}
+#endif
+
+static const struct v4l2_subdev_core_ops cx18_av_general_ops = {
+ .g_chip_ident = cx18_av_g_chip_ident,
+ .log_status = cx18_av_log_status,
+ .init = cx18_av_init,
+ .load_fw = cx18_av_load_fw,
+ .reset = cx18_av_reset,
+ .queryctrl = cx18_av_queryctrl,
+ .g_ctrl = cx18_av_g_ctrl,
+ .s_ctrl = cx18_av_s_ctrl,
+ .s_std = cx18_av_s_std,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+ .g_register = cx18_av_g_register,
+ .s_register = cx18_av_s_register,
+#endif
+};
+
+static const struct v4l2_subdev_tuner_ops cx18_av_tuner_ops = {
+ .s_radio = cx18_av_s_radio,
+ .s_frequency = cx18_av_s_frequency,
+ .g_tuner = cx18_av_g_tuner,
+ .s_tuner = cx18_av_s_tuner,
+};
+
+static const struct v4l2_subdev_audio_ops cx18_av_audio_ops = {
+ .s_clock_freq = cx18_av_s_clock_freq,
+ .s_routing = cx18_av_s_audio_routing,
+};
+
+static const struct v4l2_subdev_video_ops cx18_av_video_ops = {
+ .s_routing = cx18_av_s_video_routing,
+ .decode_vbi_line = cx18_av_decode_vbi_line,
+ .s_stream = cx18_av_s_stream,
+ .g_fmt = cx18_av_g_fmt,
+ .s_fmt = cx18_av_s_fmt,
+};
+
+static const struct v4l2_subdev_ops cx18_av_ops = {
+ .core = &cx18_av_general_ops,
+ .tuner = &cx18_av_tuner_ops,
+ .audio = &cx18_av_audio_ops,
+ .video = &cx18_av_video_ops,
+};
+
+int cx18_av_probe(struct cx18 *cx)
+{
+ struct cx18_av_state *state = &cx->av_state;
+ struct v4l2_subdev *sd;
+
+ state->rev = cx18_av_read4(cx, CXADEC_CHIP_CTRL) & 0xffff;
+ state->id = ((state->rev >> 4) == CXADEC_CHIP_TYPE_MAKO)
+ ? V4L2_IDENT_CX23418_843 : V4L2_IDENT_UNKNOWN;
+
+ state->vid_input = CX18_AV_COMPOSITE7;
+ state->aud_input = CX18_AV_AUDIO8;
+ state->audclk_freq = 48000;
+ state->audmode = V4L2_TUNER_MODE_LANG1;
+ state->slicer_line_delay = 0;
+ state->slicer_line_offset = (10 + state->slicer_line_delay - 2);
+
+ sd = &state->sd;
+ v4l2_subdev_init(sd, &cx18_av_ops);
+ v4l2_set_subdevdata(sd, cx);
+ snprintf(sd->name, sizeof(sd->name),
+ "%s %03x", cx->v4l2_dev.name, (state->rev >> 4));
+ sd->grp_id = CX18_HW_418_AV;
+ return v4l2_device_register_subdev(&cx->v4l2_dev, sd);
+}
projects / linux-2.6-omap-h63xx.git / blobdiff