#include "cx23885.h"
#include <media/v4l2-common.h>
+#include "dvb_ca_en50221.h"
#include "s5h1409.h"
#include "s5h1411.h"
#include "mt2131.h"
#include "dib7000p.h"
#include "dibx000_common.h"
#include "zl10353.h"
+#include "stv0900.h"
+#include "stv6110.h"
+#include "lnbh24.h"
+#include "cx24116.h"
+#include "cimax2.h"
+#include "netup-eeprom.h"
+#include "netup-init.h"
static unsigned int debug;
.no_tuner = 1,
};
+static struct stv0900_config netup_stv0900_config = {
+ .demod_address = 0x68,
+ .xtal = 27000000,
+ .clkmode = 3,/* 0-CLKI, 2-XTALI, else AUTO */
+ .diseqc_mode = 2,/* 2/3 PWM */
+ .path1_mode = 2,/*Serial continues clock */
+ .path2_mode = 2,/*Serial continues clock */
+ .tun1_maddress = 0,/* 0x60 */
+ .tun2_maddress = 3,/* 0x63 */
+ .tun1_adc = 1,/* 1 Vpp */
+ .tun2_adc = 1,/* 1 Vpp */
+};
+
+static struct stv6110_config netup_stv6110_tunerconfig_a = {
+ .i2c_address = 0x60,
+ .mclk = 27000000,
+ .iq_wiring = 0,
+};
+
+static struct stv6110_config netup_stv6110_tunerconfig_b = {
+ .i2c_address = 0x63,
+ .mclk = 27000000,
+ .iq_wiring = 1,
+};
+
+static int tbs_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
+{
+ struct cx23885_tsport *port = fe->dvb->priv;
+ struct cx23885_dev *dev = port->dev;
+
+ if (voltage == SEC_VOLTAGE_18)
+ cx_write(MC417_RWD, 0x00001e00);/* GPIO-13 high */
+ else if (voltage == SEC_VOLTAGE_13)
+ cx_write(MC417_RWD, 0x00001a00);/* GPIO-13 low */
+ else
+ cx_write(MC417_RWD, 0x00001800);/* GPIO-12 low */
+ return 0;
+}
+
+static struct cx24116_config tbs_cx24116_config = {
+ .demod_address = 0x05,
+};
+
+static struct cx24116_config tevii_cx24116_config = {
+ .demod_address = 0x55,
+};
+
+static struct cx24116_config dvbworld_cx24116_config = {
+ .demod_address = 0x05,
+};
+
static int dvb_register(struct cx23885_tsport *port)
{
struct cx23885_dev *dev = port->dev;
struct cx23885_i2c *i2c_bus = NULL;
struct videobuf_dvb_frontend *fe0;
+ int ret;
/* Get the first frontend */
fe0 = videobuf_dvb_get_frontend(&port->frontends, 1);
fe->ops.tuner_ops.set_config(fe, &ctl);
}
break;
+ case CX23885_BOARD_TBS_6920:
+ i2c_bus = &dev->i2c_bus[0];
+
+ fe0->dvb.frontend = dvb_attach(cx24116_attach,
+ &tbs_cx24116_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL)
+ fe0->dvb.frontend->ops.set_voltage = tbs_set_voltage;
+
+ break;
+ case CX23885_BOARD_TEVII_S470:
+ i2c_bus = &dev->i2c_bus[1];
+
+ fe0->dvb.frontend = dvb_attach(cx24116_attach,
+ &tevii_cx24116_config,
+ &i2c_bus->i2c_adap);
+ if (fe0->dvb.frontend != NULL)
+ fe0->dvb.frontend->ops.set_voltage = tbs_set_voltage;
+
+ break;
+ case CX23885_BOARD_DVBWORLD_2005:
+ i2c_bus = &dev->i2c_bus[1];
+
+ fe0->dvb.frontend = dvb_attach(cx24116_attach,
+ &dvbworld_cx24116_config,
+ &i2c_bus->i2c_adap);
+ break;
+ case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+ i2c_bus = &dev->i2c_bus[0];
+ switch (port->nr) {
+ /* port B */
+ case 1:
+ fe0->dvb.frontend = dvb_attach(stv0900_attach,
+ &netup_stv0900_config,
+ &i2c_bus->i2c_adap, 0);
+ if (fe0->dvb.frontend != NULL) {
+ if (dvb_attach(stv6110_attach,
+ fe0->dvb.frontend,
+ &netup_stv6110_tunerconfig_a,
+ &i2c_bus->i2c_adap)) {
+ if (!dvb_attach(lnbh24_attach,
+ fe0->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ LNBH24_PCL, 0, 0x09))
+ printk(KERN_ERR
+ "No LNBH24 found!\n");
+
+ }
+ }
+ break;
+ /* port C */
+ case 2:
+ fe0->dvb.frontend = dvb_attach(stv0900_attach,
+ &netup_stv0900_config,
+ &i2c_bus->i2c_adap, 1);
+ if (fe0->dvb.frontend != NULL) {
+ if (dvb_attach(stv6110_attach,
+ fe0->dvb.frontend,
+ &netup_stv6110_tunerconfig_b,
+ &i2c_bus->i2c_adap)) {
+ if (!dvb_attach(lnbh24_attach,
+ fe0->dvb.frontend,
+ &i2c_bus->i2c_adap,
+ LNBH24_PCL, 0, 0x0a))
+ printk(KERN_ERR
+ "No LNBH24 found!\n");
+
+ }
+ }
+ break;
+ }
+ break;
default:
printk(KERN_INFO "%s: The frontend of your DVB/ATSC card "
" isn't supported yet\n",
fe0->dvb.frontend->callback = cx23885_tuner_callback;
/* Put the analog decoder in standby to keep it quiet */
- cx23885_call_i2c_clients(i2c_bus, TUNER_SET_STANDBY, NULL);
+ call_all(dev, tuner, s_standby);
if (fe0->dvb.frontend->ops.analog_ops.standby)
fe0->dvb.frontend->ops.analog_ops.standby(fe0->dvb.frontend);
/* register everything */
- return videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port,
+ ret = videobuf_dvb_register_bus(&port->frontends, THIS_MODULE, port,
&dev->pci->dev, adapter_nr, 0);
+ /* init CI & MAC */
+ switch (dev->board) {
+ case CX23885_BOARD_NETUP_DUAL_DVBS2_CI: {
+ static struct netup_card_info cinfo;
+
+ netup_get_card_info(&dev->i2c_bus[0].i2c_adap, &cinfo);
+ memcpy(port->frontends.adapter.proposed_mac,
+ cinfo.port[port->nr - 1].mac, 6);
+ printk(KERN_INFO "NetUP Dual DVB-S2 CI card port%d MAC="
+ "%02X:%02X:%02X:%02X:%02X:%02X\n",
+ port->nr,
+ port->frontends.adapter.proposed_mac[0],
+ port->frontends.adapter.proposed_mac[1],
+ port->frontends.adapter.proposed_mac[2],
+ port->frontends.adapter.proposed_mac[3],
+ port->frontends.adapter.proposed_mac[4],
+ port->frontends.adapter.proposed_mac[5]);
+
+ netup_ci_init(port);
+ break;
+ }
+ }
+
+ return ret;
}
int cx23885_dvb_register(struct cx23885_tsport *port)
if (fe0->dvb.frontend)
videobuf_dvb_unregister_bus(&port->frontends);
+ switch (port->dev->board) {
+ case CX23885_BOARD_NETUP_DUAL_DVBS2_CI:
+ netup_ci_exit(port);
+ break;
+ }
+
return 0;
}
projects / linux-2.6-omap-h63xx.git / blobdiff