/*
* Define the return values and values passed to user's callout functions.
* (It is important to add new value codes at the end just preceding
- * xpcUnknownReason, which must have the highest numerical value.)
+ * xpUnknownReason, which must have the highest numerical value.)
*/
-enum xpc_retval {
- xpcSuccess = 0,
+enum xp_retval {
+ xpSuccess = 0,
- xpcNotConnected, /* 1: channel is not connected */
- xpcConnected, /* 2: channel connected (opened) */
- xpcRETIRED1, /* 3: (formerly xpcDisconnected) */
+ xpNotConnected, /* 1: channel is not connected */
+ xpConnected, /* 2: channel connected (opened) */
+ xpRETIRED1, /* 3: (formerly xpDisconnected) */
- xpcMsgReceived, /* 4: message received */
- xpcMsgDelivered, /* 5: message delivered and acknowledged */
+ xpMsgReceived, /* 4: message received */
+ xpMsgDelivered, /* 5: message delivered and acknowledged */
- xpcRETIRED2, /* 6: (formerly xpcTransferFailed) */
+ xpRETIRED2, /* 6: (formerly xpTransferFailed) */
- xpcNoWait, /* 7: operation would require wait */
- xpcRetry, /* 8: retry operation */
- xpcTimeout, /* 9: timeout in xpc_allocate_msg_wait() */
- xpcInterrupted, /* 10: interrupted wait */
+ xpNoWait, /* 7: operation would require wait */
+ xpRetry, /* 8: retry operation */
+ xpTimeout, /* 9: timeout in xpc_allocate_msg_wait() */
+ xpInterrupted, /* 10: interrupted wait */
- xpcUnequalMsgSizes, /* 11: message size disparity between sides */
- xpcInvalidAddress, /* 12: invalid address */
+ xpUnequalMsgSizes, /* 11: message size disparity between sides */
+ xpInvalidAddress, /* 12: invalid address */
- xpcNoMemory, /* 13: no memory available for XPC structures */
- xpcLackOfResources, /* 14: insufficient resources for operation */
- xpcUnregistered, /* 15: channel is not registered */
- xpcAlreadyRegistered, /* 16: channel is already registered */
+ xpNoMemory, /* 13: no memory available for XPC structures */
+ xpLackOfResources, /* 14: insufficient resources for operation */
+ xpUnregistered, /* 15: channel is not registered */
+ xpAlreadyRegistered, /* 16: channel is already registered */
- xpcPartitionDown, /* 17: remote partition is down */
- xpcNotLoaded, /* 18: XPC module is not loaded */
- xpcUnloading, /* 19: this side is unloading XPC module */
+ xpPartitionDown, /* 17: remote partition is down */
+ xpNotLoaded, /* 18: XPC module is not loaded */
+ xpUnloading, /* 19: this side is unloading XPC module */
- xpcBadMagic, /* 20: XPC MAGIC string not found */
+ xpBadMagic, /* 20: XPC MAGIC string not found */
- xpcReactivating, /* 21: remote partition was reactivated */
+ xpReactivating, /* 21: remote partition was reactivated */
- xpcUnregistering, /* 22: this side is unregistering channel */
- xpcOtherUnregistering, /* 23: other side is unregistering channel */
+ xpUnregistering, /* 22: this side is unregistering channel */
+ xpOtherUnregistering, /* 23: other side is unregistering channel */
- xpcCloneKThread, /* 24: cloning kernel thread */
- xpcCloneKThreadFailed, /* 25: cloning kernel thread failed */
+ xpCloneKThread, /* 24: cloning kernel thread */
+ xpCloneKThreadFailed, /* 25: cloning kernel thread failed */
- xpcNoHeartbeat, /* 26: remote partition has no heartbeat */
+ xpNoHeartbeat, /* 26: remote partition has no heartbeat */
- xpcPioReadError, /* 27: PIO read error */
- xpcPhysAddrRegFailed, /* 28: registration of phys addr range failed */
+ xpPioReadError, /* 27: PIO read error */
+ xpPhysAddrRegFailed, /* 28: registration of phys addr range failed */
- xpcBteDirectoryError, /* 29: maps to BTEFAIL_DIR */
- xpcBtePoisonError, /* 30: maps to BTEFAIL_POISON */
- xpcBteWriteError, /* 31: maps to BTEFAIL_WERR */
- xpcBteAccessError, /* 32: maps to BTEFAIL_ACCESS */
- xpcBtePWriteError, /* 33: maps to BTEFAIL_PWERR */
- xpcBtePReadError, /* 34: maps to BTEFAIL_PRERR */
- xpcBteTimeOutError, /* 35: maps to BTEFAIL_TOUT */
- xpcBteXtalkError, /* 36: maps to BTEFAIL_XTERR */
- xpcBteNotAvailable, /* 37: maps to BTEFAIL_NOTAVAIL */
- xpcBteUnmappedError, /* 38: unmapped BTEFAIL_ error */
+ xpRETIRED3, /* 29: (formerly xpBteDirectoryError) */
+ xpRETIRED4, /* 30: (formerly xpBtePoisonError) */
+ xpRETIRED5, /* 31: (formerly xpBteWriteError) */
+ xpRETIRED6, /* 32: (formerly xpBteAccessError) */
+ xpRETIRED7, /* 33: (formerly xpBtePWriteError) */
+ xpRETIRED8, /* 34: (formerly xpBtePReadError) */
+ xpRETIRED9, /* 35: (formerly xpBteTimeOutError) */
+ xpRETIRED10, /* 36: (formerly xpBteXtalkError) */
+ xpRETIRED11, /* 37: (formerly xpBteNotAvailable) */
+ xpRETIRED12, /* 38: (formerly xpBteUnmappedError) */
- xpcBadVersion, /* 39: bad version number */
- xpcVarsNotSet, /* 40: the XPC variables are not set up */
- xpcNoRsvdPageAddr, /* 41: unable to get rsvd page's phys addr */
- xpcInvalidPartid, /* 42: invalid partition ID */
- xpcLocalPartid, /* 43: local partition ID */
+ xpBadVersion, /* 39: bad version number */
+ xpVarsNotSet, /* 40: the XPC variables are not set up */
+ xpNoRsvdPageAddr, /* 41: unable to get rsvd page's phys addr */
+ xpInvalidPartid, /* 42: invalid partition ID */
+ xpLocalPartid, /* 43: local partition ID */
- xpcOtherGoingDown, /* 44: other side going down, reason unknown */
- xpcSystemGoingDown, /* 45: system is going down, reason unknown */
- xpcSystemHalt, /* 46: system is being halted */
- xpcSystemReboot, /* 47: system is being rebooted */
- xpcSystemPoweroff, /* 48: system is being powered off */
+ xpOtherGoingDown, /* 44: other side going down, reason unknown */
+ xpSystemGoingDown, /* 45: system is going down, reason unknown */
+ xpSystemHalt, /* 46: system is being halted */
+ xpSystemReboot, /* 47: system is being rebooted */
+ xpSystemPoweroff, /* 48: system is being powered off */
- xpcDisconnecting, /* 49: channel disconnecting (closing) */
+ xpDisconnecting, /* 49: channel disconnecting (closing) */
- xpcOpenCloseError, /* 50: channel open/close protocol error */
+ xpOpenCloseError, /* 50: channel open/close protocol error */
- xpcDisconnected, /* 51: channel disconnected (closed) */
+ xpDisconnected, /* 51: channel disconnected (closed) */
- xpcBteSh2Start, /* 52: BTE CRB timeout */
+ xpBteCopyError, /* 52: bte_copy() returned error */
- /* 53: 0x1 BTE Error Response Short */
- xpcBteSh2RspShort = xpcBteSh2Start + BTEFAIL_SH2_RESP_SHORT,
-
- /* 54: 0x2 BTE Error Response Long */
- xpcBteSh2RspLong = xpcBteSh2Start + BTEFAIL_SH2_RESP_LONG,
-
- /* 56: 0x4 BTE Error Response DSB */
- xpcBteSh2RspDSB = xpcBteSh2Start + BTEFAIL_SH2_RESP_DSP,
-
- /* 60: 0x8 BTE Error Response Access */
- xpcBteSh2RspAccess = xpcBteSh2Start + BTEFAIL_SH2_RESP_ACCESS,
-
- /* 68: 0x10 BTE Error CRB timeout */
- xpcBteSh2CRBTO = xpcBteSh2Start + BTEFAIL_SH2_CRB_TO,
-
- /* 84: 0x20 BTE Error NACK limit */
- xpcBteSh2NACKLimit = xpcBteSh2Start + BTEFAIL_SH2_NACK_LIMIT,
-
- /* 115: BTE end */
- xpcBteSh2End = xpcBteSh2Start + BTEFAIL_SH2_ALL,
-
- xpcUnknownReason /* 116: unknown reason - must be last in enum */
+ xpUnknownReason /* 53: unknown reason - must be last in enum */
};
/*
- * Define the callout function types used by XPC to update the user on
- * connection activity and state changes (via the user function registered by
- * xpc_connect()) and to notify them of messages received and delivered (via
- * the user function registered by xpc_send_notify()).
- *
- * The two function types are xpc_channel_func and xpc_notify_func and
- * both share the following arguments, with the exception of "data", which
- * only xpc_channel_func has.
+ * Define the callout function type used by XPC to update the user on
+ * connection activity and state changes via the user function registered
+ * by xpc_connect().
*
* Arguments:
*
- * reason - reason code. (See following table.)
+ * reason - reason code.
* partid - partition ID associated with condition.
* ch_number - channel # associated with condition.
- * data - pointer to optional data. (See following table.)
+ * data - pointer to optional data.
* key - pointer to optional user-defined value provided as the "key"
- * argument to xpc_connect() or xpc_send_notify().
+ * argument to xpc_connect().
*
- * In the following table the "Optional Data" column applies to callouts made
- * to functions registered by xpc_connect(). A "NA" in that column indicates
- * that this reason code can be passed to functions registered by
- * xpc_send_notify() (i.e. they don't have data arguments).
+ * A reason code of xpConnected indicates that a connection has been
+ * established to the specified partition on the specified channel. The data
+ * argument indicates the max number of entries allowed in the message queue.
*
- * Also, the first three reason codes in the following table indicate
- * success, whereas the others indicate failure. When a failure reason code
- * is received, one can assume that the channel is not connected.
+ * A reason code of xpMsgReceived indicates that a XPC message arrived from
+ * the specified partition on the specified channel. The data argument
+ * specifies the address of the message's payload. The user must call
+ * xpc_received() when finished with the payload.
*
- *
- * Reason Code | Cause | Optional Data
- * =====================+================================+=====================
- * xpcConnected | connection has been established| max #of entries
- * | to the specified partition on | allowed in message
- * | the specified channel | queue
- * ---------------------+--------------------------------+---------------------
- * xpcMsgReceived | an XPC message arrived from | address of payload
- * | the specified partition on the |
- * | specified channel | [the user must call
- * | | xpc_received() when
- * | | finished with the
- * | | payload]
- * ---------------------+--------------------------------+---------------------
- * xpcMsgDelivered | notification that the message | NA
- * | was delivered to the intended |
- * | recipient and that they have |
- * | acknowledged its receipt by |
- * | calling xpc_received() |
- * =====================+================================+=====================
- * xpcUnequalMsgSizes | can't connect to the specified | NULL
- * | partition on the specified |
- * | channel because of mismatched |
- * | message sizes |
- * ---------------------+--------------------------------+---------------------
- * xpcNoMemory | insufficient memory avaiable | NULL
- * | to allocate message queue |
- * ---------------------+--------------------------------+---------------------
- * xpcLackOfResources | lack of resources to create | NULL
- * | the necessary kthreads to |
- * | support the channel |
- * ---------------------+--------------------------------+---------------------
- * xpcUnregistering | this side's user has | NULL or NA
- * | unregistered by calling |
- * | xpc_disconnect() |
- * ---------------------+--------------------------------+---------------------
- * xpcOtherUnregistering| the other side's user has | NULL or NA
- * | unregistered by calling |
- * | xpc_disconnect() |
- * ---------------------+--------------------------------+---------------------
- * xpcNoHeartbeat | the other side's XPC is no | NULL or NA
- * | longer heartbeating |
- * | |
- * ---------------------+--------------------------------+---------------------
- * xpcUnloading | this side's XPC module is | NULL or NA
- * | being unloaded |
- * | |
- * ---------------------+--------------------------------+---------------------
- * xpcOtherUnloading | the other side's XPC module is | NULL or NA
- * | is being unloaded |
- * | |
- * ---------------------+--------------------------------+---------------------
- * xpcPioReadError | xp_nofault_PIOR() returned an | NULL or NA
- * | error while sending an IPI |
- * | |
- * ---------------------+--------------------------------+---------------------
- * xpcInvalidAddress | the address either received or | NULL or NA
- * | sent by the specified partition|
- * | is invalid |
- * ---------------------+--------------------------------+---------------------
- * xpcBteNotAvailable | attempt to pull data from the | NULL or NA
- * xpcBtePoisonError | specified partition over the |
- * xpcBteWriteError | specified channel via a |
- * xpcBteAccessError | bte_copy() failed |
- * xpcBteTimeOutError | |
- * xpcBteXtalkError | |
- * xpcBteDirectoryError | |
- * xpcBteGenericError | |
- * xpcBteUnmappedError | |
- * ---------------------+--------------------------------+---------------------
- * xpcUnknownReason | the specified channel to the | NULL or NA
- * | specified partition was |
- * | unavailable for unknown reasons|
- * =====================+================================+=====================
+ * All other reason codes indicate failure. The data argmument is NULL.
+ * When a failure reason code is received, one can assume that the channel
+ * is not connected.
*/
-
-typedef void (*xpc_channel_func) (enum xpc_retval reason, partid_t partid,
+typedef void (*xpc_channel_func) (enum xp_retval reason, short partid,
int ch_number, void *data, void *key);
-typedef void (*xpc_notify_func) (enum xpc_retval reason, partid_t partid,
+/*
+ * Define the callout function type used by XPC to notify the user of
+ * messages received and delivered via the user function registered by
+ * xpc_send_notify().
+ *
+ * Arguments:
+ *
+ * reason - reason code.
+ * partid - partition ID associated with condition.
+ * ch_number - channel # associated with condition.
+ * key - pointer to optional user-defined value provided as the "key"
+ * argument to xpc_send_notify().
+ *
+ * A reason code of xpMsgDelivered indicates that the message was delivered
+ * to the intended recipient and that they have acknowledged its receipt by
+ * calling xpc_received().
+ *
+ * All other reason codes indicate failure.
+ */
+typedef void (*xpc_notify_func) (enum xp_retval reason, short partid,
int ch_number, void *key);
/*
struct xpc_interface {
void (*connect) (int);
void (*disconnect) (int);
- enum xpc_retval (*allocate) (partid_t, int, u32, void **);
- enum xpc_retval (*send) (partid_t, int, void *);
- enum xpc_retval (*send_notify) (partid_t, int, void *,
+ enum xp_retval (*allocate) (short, int, u32, void **);
+ enum xp_retval (*send) (short, int, void *);
+ enum xp_retval (*send_notify) (short, int, void *,
xpc_notify_func, void *);
- void (*received) (partid_t, int, void *);
- enum xpc_retval (*partid_to_nasids) (partid_t, void *);
+ void (*received) (short, int, void *);
+ enum xp_retval (*partid_to_nasids) (short, void *);
};
extern struct xpc_interface xpc_interface;
extern void xpc_set_interface(void (*)(int),
void (*)(int),
- enum xpc_retval (*)(partid_t, int, u32, void **),
- enum xpc_retval (*)(partid_t, int, void *),
- enum xpc_retval (*)(partid_t, int, void *,
+ enum xp_retval (*)(short, int, u32, void **),
+ enum xp_retval (*)(short, int, void *),
+ enum xp_retval (*)(short, int, void *,
xpc_notify_func, void *),
- void (*)(partid_t, int, void *),
- enum xpc_retval (*)(partid_t, void *));
+ void (*)(short, int, void *),
+ enum xp_retval (*)(short, void *));
extern void xpc_clear_interface(void);
-extern enum xpc_retval xpc_connect(int, xpc_channel_func, void *, u16,
+extern enum xp_retval xpc_connect(int, xpc_channel_func, void *, u16,
u16, u32, u32);
extern void xpc_disconnect(int);
-static inline enum xpc_retval
-xpc_allocate(partid_t partid, int ch_number, u32 flags, void **payload)
+static inline enum xp_retval
+xpc_allocate(short partid, int ch_number, u32 flags, void **payload)
{
return xpc_interface.allocate(partid, ch_number, flags, payload);
}
-static inline enum xpc_retval
-xpc_send(partid_t partid, int ch_number, void *payload)
+static inline enum xp_retval
+xpc_send(short partid, int ch_number, void *payload)
{
return xpc_interface.send(partid, ch_number, payload);
}
-static inline enum xpc_retval
-xpc_send_notify(partid_t partid, int ch_number, void *payload,
+static inline enum xp_retval
+xpc_send_notify(short partid, int ch_number, void *payload,
xpc_notify_func func, void *key)
{
return xpc_interface.send_notify(partid, ch_number, payload, func, key);
}
static inline void
-xpc_received(partid_t partid, int ch_number, void *payload)
+xpc_received(short partid, int ch_number, void *payload)
{
return xpc_interface.received(partid, ch_number, payload);
}
-static inline enum xpc_retval
-xpc_partid_to_nasids(partid_t partid, void *nasids)
+static inline enum xp_retval
+xpc_partid_to_nasids(short partid, void *nasids)
{
return xpc_interface.partid_to_nasids(partid, nasids);
}