/**
* nand_select_chip - [DEFAULT] control CE line
* @mtd: MTD device structure
- * @chip: chipnumber to select, -1 for deselect
+ * @chipnr: chipnumber to select, -1 for deselect
*
* Default select function for 1 chip devices.
*/
* Wait for the ready pin, after a command
* The timeout is catched later.
*/
-static void nand_wait_ready(struct mtd_info *mtd)
+void nand_wait_ready(struct mtd_info *mtd)
{
struct nand_chip *chip = mtd->priv;
unsigned long timeo = jiffies + 2;
} while (time_before(jiffies, timeo));
led_trigger_event(nand_led_trigger, LED_OFF);
}
+EXPORT_SYMBOL_GPL(nand_wait_ready);
/**
* nand_command - [DEFAULT] Send command to NAND device
* Send command to NAND device. This is the version for the new large page
* devices We dont have the separate regions as we have in the small page
* devices. We must emulate NAND_CMD_READOOB to keep the code compatible.
- *
*/
static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
int column, int page_addr)
/**
* nand_get_device - [GENERIC] Get chip for selected access
- * @this: the nand chip descriptor
+ * @chip: the nand chip descriptor
* @mtd: MTD device structure
* @new_state: the state which is requested
*
/**
* nand_wait - [DEFAULT] wait until the command is done
* @mtd: MTD device structure
- * @this: NAND chip structure
+ * @chip: NAND chip structure
*
* Wait for command done. This applies to erase and program only
* Erase can take up to 400ms and program up to 20ms according to
* general NAND and SmartMedia specs
- *
-*/
+ */
static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
{
}
/**
- * nand_read_page_swecc - {REPLACABLE] software ecc based page read function
+ * nand_read_page_swecc - [REPLACABLE] software ecc based page read function
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
uint8_t *p = buf;
- uint8_t *ecc_calc = chip->buffers.ecccalc;
- uint8_t *ecc_code = chip->buffers.ecccode;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ uint8_t *ecc_code = chip->buffers->ecccode;
int *eccpos = chip->ecc.layout->eccpos;
nand_read_page_raw(mtd, chip, buf);
}
/**
- * nand_read_page_hwecc - {REPLACABLE] hardware ecc based page read function
+ * nand_read_page_hwecc - [REPLACABLE] hardware ecc based page read function
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
uint8_t *p = buf;
- uint8_t *ecc_calc = chip->buffers.ecccalc;
- uint8_t *ecc_code = chip->buffers.ecccode;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ uint8_t *ecc_code = chip->buffers->ecccode;
int *eccpos = chip->ecc.layout->eccpos;
for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
}
/**
- * nand_read_page_syndrome - {REPLACABLE] hardware ecc syndrom based page read
+ * nand_read_page_syndrome - [REPLACABLE] hardware ecc syndrom based page read
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: buffer to store read data
/**
* nand_transfer_oob - [Internal] Transfer oob to client buffer
* @chip: nand chip structure
+ * @oob: oob destination address
* @ops: oob ops structure
*/
static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
*
* @mtd: MTD device structure
* @from: offset to read from
+ * @ops: oob ops structure
*
* Internal function. Called with chip held.
*/
page = realpage & chip->pagemask;
col = (int)(from & (mtd->writesize - 1));
- chip->oob_poi = chip->buffers.oobrbuf;
buf = ops->datbuf;
oob = ops->oobbuf;
/* Is the current page in the buffer ? */
if (realpage != chip->pagebuf || oob) {
- bufpoi = aligned ? buf : chip->buffers.databuf;
+ bufpoi = aligned ? buf : chip->buffers->databuf;
if (likely(sndcmd)) {
chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
}
/* Now read the page into the buffer */
- ret = chip->ecc.read_page(mtd, chip, bufpoi);
+ if (unlikely(ops->mode == MTD_OOB_RAW))
+ ret = chip->ecc.read_page_raw(mtd, chip, bufpoi);
+ else
+ ret = chip->ecc.read_page(mtd, chip, bufpoi);
if (ret < 0)
break;
/* Transfer not aligned data */
if (!aligned) {
chip->pagebuf = realpage;
- memcpy(buf, chip->buffers.databuf + col, bytes);
+ memcpy(buf, chip->buffers->databuf + col, bytes);
}
buf += bytes;
nand_wait_ready(mtd);
}
} else {
- memcpy(buf, chip->buffers.databuf + col, bytes);
+ memcpy(buf, chip->buffers->databuf + col, bytes);
buf += bytes;
}
ret = nand_do_read_ops(mtd, from, &chip->ops);
+ *retlen = chip->ops.retlen;
+
nand_release_device(mtd);
- *retlen = chip->ops.retlen;
return ret;
}
pos = steps * (eccsize + chunk);
steps = 0;
} else
- pos = eccsize + chunk;
+ pos = eccsize;
chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
for (i = 0; i < steps; i++) {
realpage = (int)(from >> chip->page_shift);
page = realpage & chip->pagemask;
- chip->oob_poi = chip->buffers.oobrbuf;
-
while(1) {
sndcmd = chip->ecc.read_oob(mtd, chip, page, sndcmd);
buf = nand_transfer_oob(chip, buf, ops);
static int nand_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
- int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
- uint8_t *buf) = NULL;
struct nand_chip *chip = mtd->priv;
int ret = -ENOTSUPP;
switch(ops->mode) {
case MTD_OOB_PLACE:
case MTD_OOB_AUTO:
- break;
-
case MTD_OOB_RAW:
- /* Replace the read_page algorithm temporary */
- read_page = chip->ecc.read_page;
- chip->ecc.read_page = nand_read_page_raw;
break;
default:
else
ret = nand_do_read_ops(mtd, from, ops);
- if (unlikely(ops->mode == MTD_OOB_RAW))
- chip->ecc.read_page = read_page;
out:
nand_release_device(mtd);
return ret;
}
/**
- * nand_write_page_swecc - {REPLACABLE] software ecc based page write function
+ * nand_write_page_swecc - [REPLACABLE] software ecc based page write function
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: data buffer
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
- uint8_t *ecc_calc = chip->buffers.ecccalc;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
const uint8_t *p = buf;
int *eccpos = chip->ecc.layout->eccpos;
}
/**
- * nand_write_page_hwecc - {REPLACABLE] hardware ecc based page write function
+ * nand_write_page_hwecc - [REPLACABLE] hardware ecc based page write function
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: data buffer
int i, eccsize = chip->ecc.size;
int eccbytes = chip->ecc.bytes;
int eccsteps = chip->ecc.steps;
- uint8_t *ecc_calc = chip->buffers.ecccalc;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
const uint8_t *p = buf;
int *eccpos = chip->ecc.layout->eccpos;
}
/**
- * nand_write_page_syndrome - {REPLACABLE] hardware ecc syndrom based page write
+ * nand_write_page_syndrome - [REPLACABLE] hardware ecc syndrom based page write
* @mtd: mtd info structure
* @chip: nand chip info structure
* @buf: data buffer
}
/**
- * nand_write_page - [INTERNAL] write one page
+ * nand_write_page - [REPLACEABLE] write one page
* @mtd: MTD device structure
* @chip: NAND chip descriptor
* @buf: the data to write
* @cached: cached programming
*/
static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf, int page, int cached)
+ const uint8_t *buf, int page, int cached, int raw)
{
int status;
chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
- chip->ecc.write_page(mtd, chip, buf);
+ if (unlikely(raw))
+ chip->ecc.write_page_raw(mtd, chip, buf);
+ else
+ chip->ecc.write_page(mtd, chip, buf);
/*
* Cached progamming disabled for now, Not sure if its worth the
bytes = min_t(size_t, len, free->length);
boffs = free->offset;
}
- memcpy(chip->oob_poi + woffs, oob, bytes);
+ memcpy(chip->oob_poi + boffs, oob, bytes);
oob += bytes;
}
return oob;
(chip->pagebuf << chip->page_shift) < (to + ops->len))
chip->pagebuf = -1;
- chip->oob_poi = chip->buffers.oobwbuf;
+ /* If we're not given explicit OOB data, let it be 0xFF */
+ if (likely(!oob))
+ memset(chip->oob_poi, 0xff, mtd->oobsize);
while(1) {
int cached = writelen > bytes && page != blockmask;
if (unlikely(oob))
oob = nand_fill_oob(chip, oob, ops);
- ret = nand_write_page(mtd, chip, buf, page, cached);
+ ret = chip->write_page(mtd, chip, buf, page, cached,
+ (ops->mode == MTD_OOB_RAW));
if (ret)
break;
}
}
- if (unlikely(oob))
- memset(chip->oob_poi, 0xff, mtd->oobsize);
-
ops->retlen = ops->len - writelen;
return ret;
}
ret = nand_do_write_ops(mtd, to, &chip->ops);
+ *retlen = chip->ops.retlen;
+
nand_release_device(mtd);
- *retlen = chip->ops.retlen;
return ret;
}
if (page == chip->pagebuf)
chip->pagebuf = -1;
- chip->oob_poi = chip->buffers.oobwbuf;
memset(chip->oob_poi, 0xff, mtd->oobsize);
nand_fill_oob(chip, ops->oobbuf, ops);
status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
/**
* nand_write_oob - [MTD Interface] NAND write data and/or out-of-band
* @mtd: MTD device structure
- * @from: offset to read from
+ * @to: offset to write to
* @ops: oob operation description structure
*/
static int nand_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
{
- void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
- const uint8_t *buf) = NULL;
struct nand_chip *chip = mtd->priv;
int ret = -ENOTSUPP;
switch(ops->mode) {
case MTD_OOB_PLACE:
case MTD_OOB_AUTO:
- break;
-
case MTD_OOB_RAW:
- /* Replace the write_page algorithm temporary */
- write_page = chip->ecc.write_page;
- chip->ecc.write_page = nand_write_page_raw;
break;
default:
else
ret = nand_do_write_ops(mtd, to, ops);
- if (unlikely(ops->mode == MTD_OOB_RAW))
- chip->ecc.write_page = write_page;
out:
nand_release_device(mtd);
return ret;
/**
* nand_block_isbad - [MTD Interface] Check if block at offset is bad
* @mtd: MTD device structure
- * @ofs: offset relative to mtd start
+ * @offs: offset relative to mtd start
*/
static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
{
}
/* Try to identify manufacturer */
- for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_id++) {
+ for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_idx++) {
if (nand_manuf_ids[maf_idx].id == *maf_id)
break;
}
return type;
}
-/* module_text_address() isn't exported, and it's mostly a pointless
- test if this is a module _anyway_ -- they'd have to try _really_ hard
- to call us from in-kernel code if the core NAND support is modular. */
-#ifdef MODULE
-#define caller_is_module() (1)
-#else
-#define caller_is_module() \
- module_text_address((unsigned long)__builtin_return_address(0))
-#endif
-
/**
- * nand_scan - [NAND Interface] Scan for the NAND device
- * @mtd: MTD device structure
- * @maxchips: Number of chips to scan for
+ * nand_scan_ident - [NAND Interface] Scan for the NAND device
+ * @mtd: MTD device structure
+ * @maxchips: Number of chips to scan for
*
- * This fills out all the uninitialized function pointers
- * with the defaults.
- * The flash ID is read and the mtd/chip structures are
- * filled with the appropriate values.
- * The mtd->owner field must be set to the module of the caller
+ * This is the first phase of the normal nand_scan() function. It
+ * reads the flash ID and sets up MTD fields accordingly.
*
+ * The mtd->owner field must be set to the module of the caller.
*/
-int nand_scan(struct mtd_info *mtd, int maxchips)
+int nand_scan_ident(struct mtd_info *mtd, int maxchips)
{
int i, busw, nand_maf_id;
struct nand_chip *chip = mtd->priv;
struct nand_flash_dev *type;
- /* Many callers got this wrong, so check for it for a while... */
- if (!mtd->owner && caller_is_module()) {
- printk(KERN_CRIT "nand_scan() called with NULL mtd->owner!\n");
- BUG();
- }
-
/* Get buswidth to select the correct functions */
busw = chip->options & NAND_BUSWIDTH_16;
/* Set the default functions */
chip->numchips = i;
mtd->size = i * chip->chipsize;
- /* Preset the internal oob write buffer */
- memset(chip->buffers.oobwbuf, 0xff, mtd->oobsize);
+ return 0;
+}
+
+
+/**
+ * nand_scan_tail - [NAND Interface] Scan for the NAND device
+ * @mtd: MTD device structure
+ * @maxchips: Number of chips to scan for
+ *
+ * This is the second phase of the normal nand_scan() function. It
+ * fills out all the uninitialized function pointers with the defaults
+ * and scans for a bad block table if appropriate.
+ */
+int nand_scan_tail(struct mtd_info *mtd)
+{
+ int i;
+ struct nand_chip *chip = mtd->priv;
+
+ if (!(chip->options & NAND_OWN_BUFFERS))
+ chip->buffers = kmalloc(sizeof(*chip->buffers), GFP_KERNEL);
+ if (!chip->buffers)
+ return -ENOMEM;
+
+ /* Set the internal oob buffer location, just after the page data */
+ chip->oob_poi = chip->buffers->databuf + mtd->writesize;
/*
* If no default placement scheme is given, select an appropriate one
}
}
+ if (!chip->write_page)
+ chip->write_page = nand_write_page;
+
/*
* check ECC mode, default to software if 3byte/512byte hardware ECC is
* selected and we have 256 byte pagesize fallback to software ECC
*/
+ if (!chip->ecc.read_page_raw)
+ chip->ecc.read_page_raw = nand_read_page_raw;
+ if (!chip->ecc.write_page_raw)
+ chip->ecc.write_page_raw = nand_write_page_raw;
+
switch (chip->ecc.mode) {
case NAND_ECC_HW:
/* Use standard hwecc read page function ? */
chip->ecc.size = mtd->writesize;
chip->ecc.bytes = 0;
break;
+
default:
printk(KERN_WARNING "Invalid NAND_ECC_MODE %d\n",
chip->ecc.mode);
return chip->scan_bbt(mtd);
}
+/* module_text_address() isn't exported, and it's mostly a pointless
+ test if this is a module _anyway_ -- they'd have to try _really_ hard
+ to call us from in-kernel code if the core NAND support is modular. */
+#ifdef MODULE
+#define caller_is_module() (1)
+#else
+#define caller_is_module() \
+ module_text_address((unsigned long)__builtin_return_address(0))
+#endif
+
+/**
+ * nand_scan - [NAND Interface] Scan for the NAND device
+ * @mtd: MTD device structure
+ * @maxchips: Number of chips to scan for
+ *
+ * This fills out all the uninitialized function pointers
+ * with the defaults.
+ * The flash ID is read and the mtd/chip structures are
+ * filled with the appropriate values.
+ * The mtd->owner field must be set to the module of the caller
+ *
+ */
+int nand_scan(struct mtd_info *mtd, int maxchips)
+{
+ int ret;
+
+ /* Many callers got this wrong, so check for it for a while... */
+ if (!mtd->owner && caller_is_module()) {
+ printk(KERN_CRIT "nand_scan() called with NULL mtd->owner!\n");
+ BUG();
+ }
+
+ ret = nand_scan_ident(mtd, maxchips);
+ if (!ret)
+ ret = nand_scan_tail(mtd);
+ return ret;
+}
+
/**
* nand_release - [NAND Interface] Free resources held by the NAND device
* @mtd: MTD device structure
/* Free bad block table memory */
kfree(chip->bbt);
+ if (!(chip->options & NAND_OWN_BUFFERS))
+ kfree(chip->buffers);
}
EXPORT_SYMBOL_GPL(nand_scan);
+EXPORT_SYMBOL_GPL(nand_scan_ident);
+EXPORT_SYMBOL_GPL(nand_scan_tail);
EXPORT_SYMBOL_GPL(nand_release);
static int __init nand_base_init(void)