rt2x00: Fix rfkill structure initialization to prevent rfkill WARN_ON.

[linux-2.6-omap-h63xx.git] / drivers / net / Kconfig

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 4b4cb2bf4f11564fbd72f0e3996c966e4eff9b3a..2d6a060d92e5aeb733ca0280a45fc10f5c5cc188 100644 (file)
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -822,14 +822,14 @@ config ULTRA32
          will be called smc-ultra32.
 
 config BFIN_MAC
-       tristate "Blackfin 527/536/537 on-chip mac support"
-       depends on NET_ETHERNET && (BF527 || BF537 || BF536)
+       tristate "Blackfin on-chip MAC support"
+       depends on NET_ETHERNET && (BF526 || BF527 || BF536 || BF537)
        select CRC32
        select MII
        select PHYLIB
        select BFIN_MAC_USE_L1 if DMA_UNCACHED_NONE
        help
-         This is the driver for blackfin on-chip mac device. Say Y if you want it
+         This is the driver for Blackfin on-chip mac device. Say Y if you want it
          compiled into the kernel. This driver is also available as a module
          ( = code which can be inserted in and removed from the running kernel
          whenever you want). The module will be called bfin_mac.
@@ -1172,7 +1172,7 @@ config ETH16I
 
 config NE2000
        tristate "NE2000/NE1000 support"
-       depends on NET_ISA || (Q40 && m) || M32R || TOSHIBA_RBTX4927 || TOSHIBA_RBTX4938
+       depends on NET_ISA || (Q40 && m) || M32R || MACH_TX49XX
        select CRC32
        ---help---
          If you have a network (Ethernet) card of this type, say Y and read
@@ -1813,7 +1813,7 @@ config FEC2
 
 config FEC_MPC52xx
        tristate "MPC52xx FEC driver"
-       depends on PPC_MERGE && PPC_MPC52xx && PPC_BESTCOMM_FEC
+       depends on PPC_MPC52xx && PPC_BESTCOMM_FEC
        select CRC32
        select PHYLIB
        ---help---
@@ -1840,6 +1840,17 @@ config NE_H8300
          Say Y here if you want to use the NE2000 compatible
          controller on the Renesas H8/300 processor.
 
+config ATL2
+       tristate "Atheros L2 Fast Ethernet support"
+       depends on PCI
+       select CRC32
+       select MII
+       help
+         This driver supports the Atheros L2 fast ethernet adapter.
+
+         To compile this driver as a module, choose M here.  The module
+         will be called atl2.
+
 source "drivers/net/fs_enet/Kconfig"
 
 endif # NET_ETHERNET
@@ -1927,15 +1938,6 @@ config E1000
          To compile this driver as a module, choose M here. The module
          will be called e1000.
 
-config E1000_DISABLE_PACKET_SPLIT
-       bool "Disable Packet Split for PCI express adapters"
-       depends on E1000
-       help
-         Say Y here if you want to use the legacy receive path for PCI express
-         hardware.
-
-         If in doubt, say N.
-
 config E1000E
        tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
        depends on PCI && (!SPARC32 || BROKEN)
@@ -2046,6 +2048,7 @@ config R8169
        tristate "Realtek 8169 gigabit ethernet support"
        depends on PCI
        select CRC32
+       select MII
        ---help---
          Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
 
@@ -2262,7 +2265,7 @@ config UGETH_TX_ON_DEMAND
 config MV643XX_ETH
        tristate "Marvell Discovery (643XX) and Orion ethernet support"
        depends on MV64360 || MV64X60 || (PPC_MULTIPLATFORM && PPC32) || PLAT_ORION
-       select MII
+       select PHYLIB
        help
          This driver supports the gigabit ethernet MACs in the
          Marvell Discovery PPC/MIPS chipset family (MV643XX) and
@@ -2302,6 +2305,18 @@ config ATL1E
          To compile this driver as a module, choose M here.  The module
          will be called atl1e.
 
+config JME
+       tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
+       depends on PCI
+       select CRC32
+       select MII
+       ---help---
+         This driver supports the PCI-Express gigabit ethernet adapters
+         based on JMicron JMC250 chipset.
+
+         To compile this driver as a module, choose M here. The module
+         will be called jme.
+
 endif # NETDEV_1000
 
 #
@@ -2377,10 +2392,18 @@ config EHEA
          To compile the driver as a module, choose M here. The module
          will be called ehea.
 
+config ENIC
+       tristate "E, the Cisco 10G Ethernet NIC"
+       depends on PCI && INET
+       select INET_LRO
+       help
+         This enables the support for the Cisco 10G Ethernet card.
+
 config IXGBE
        tristate "Intel(R) 10GbE PCI Express adapters support"
        depends on PCI && INET
        select INET_LRO
+       select INTEL_IOATDMA
        ---help---
          This driver supports Intel(R) 10GbE PCI Express family of
          adapters.  For more information on how to identify your adapter, go
@@ -2432,6 +2455,7 @@ config MYRI10GE
        select FW_LOADER
        select CRC32
        select INET_LRO
+       select INTEL_IOATDMA
        ---help---
          This driver supports Myricom Myri-10G Dual Protocol interface in
          Ethernet mode. If the eeprom on your board is not recent enough,
@@ -2496,6 +2520,15 @@ config BNX2X
          To compile this driver as a module, choose M here: the module
          will be called bnx2x.  This is recommended.
 
+config QLGE
+       tristate "QLogic QLGE 10Gb Ethernet Driver Support"
+       depends on PCI
+       help
+         This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
+
+         To compile this driver as a module, choose M here: the module
+         will be called qlge.
+
 source "drivers/net/sfc/Kconfig"
 
 endif # NETDEV_10000