#include <linux/mm.h>
#include <linux/module.h>
#include <linux/platform_device.h>
-#include <asm/ocp.h>
#include <linux/crc32.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include "gianfar.h"
#include "gianfar_mii.h"
-/* Write value to the PHY at mii_id at register regnum,
- * on the bus, waiting until the write is done before returning.
- * All PHY configuration is done through the TSEC1 MIIM regs */
-int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
+/*
+ * Write value to the PHY at mii_id at register regnum,
+ * on the bus attached to the local interface, which may be different from the
+ * generic mdio bus (tied to a single interface), waiting until the write is
+ * done before returning. This is helpful in programming interfaces like
+ * the TBI which control interfaces like onchip SERDES and are always tied to
+ * the local mdio pins, which may not be the same as system mdio bus, used for
+ * controlling the external PHYs, for example.
+ */
+int gfar_local_mdio_write(struct gfar_mii *regs, int mii_id,
+ int regnum, u16 value)
{
- struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
-
/* Set the PHY address and the register address we want to write */
gfar_write(®s->miimadd, (mii_id << 8) | regnum);
return 0;
}
-/* Read the bus for PHY at addr mii_id, register regnum, and
- * return the value. Clears miimcom first. All PHY
- * configuration has to be done through the TSEC1 MIIM regs */
-int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+/*
+ * Read the bus for PHY at addr mii_id, register regnum, and
+ * return the value. Clears miimcom first. All PHY operation
+ * done on the bus attached to the local interface,
+ * which may be different from the generic mdio bus
+ * This is helpful in programming interfaces like
+ * the TBI which, inturn, control interfaces like onchip SERDES
+ * and are always tied to the local mdio pins, which may not be the
+ * same as system mdio bus, used for controlling the external PHYs, for eg.
+ */
+int gfar_local_mdio_read(struct gfar_mii *regs, int mii_id, int regnum)
+
{
- struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
u16 value;
/* Set the PHY address and the register address we want to read */
return value;
}
+/* Write value to the PHY at mii_id at register regnum,
+ * on the bus, waiting until the write is done before returning.
+ * All PHY configuration is done through the TSEC1 MIIM regs */
+int gfar_mdio_write(struct mii_bus *bus, int mii_id, int regnum, u16 value)
+{
+ struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
+
+ /* Write to the local MII regs */
+ return(gfar_local_mdio_write(regs, mii_id, regnum, value));
+}
+
+/* Read the bus for PHY at addr mii_id, register regnum, and
+ * return the value. Clears miimcom first. All PHY
+ * configuration has to be done through the TSEC1 MIIM regs */
+int gfar_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+{
+ struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
+
+ /* Read the local MII regs */
+ return(gfar_local_mdio_read(regs, mii_id, regnum));
+}
/* Reset the MIIM registers, and wait for the bus to free */
int gfar_mdio_reset(struct mii_bus *bus)
struct gfar_mii __iomem *regs = (void __iomem *)bus->priv;
unsigned int timeout = PHY_INIT_TIMEOUT;
- spin_lock_bh(&bus->mdio_lock);
+ mutex_lock(&bus->mdio_lock);
/* Reset the management interface */
gfar_write(®s->miimcfg, MIIMCFG_RESET);
timeout--)
cpu_relax();
- spin_unlock_bh(&bus->mdio_lock);
+ mutex_unlock(&bus->mdio_lock);
if(timeout <= 0) {
printk(KERN_ERR "%s: The MII Bus is stuck!\n",
return driver_register(&gianfar_mdio_driver);
}
-void __exit gfar_mdio_exit(void)
+void gfar_mdio_exit(void)
{
driver_unregister(&gianfar_mdio_driver);
}