*
*/
#include <linux/kernel.h>
-#include <linux/sched.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/unistd.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
-/* Convenience function to print out the current phy status
+/**
+ * phy_print_status - Convenience function to print out the current phy status
+ * @phydev: the phy_device struct
*/
void phy_print_status(struct phy_device *phydev)
{
EXPORT_SYMBOL(phy_print_status);
-/* Convenience functions for reading/writing a given PHY
- * register. They MUST NOT be called from interrupt context,
+/**
+ * phy_read - Convenience function for reading a given PHY register
+ * @phydev: the phy_device struct
+ * @regnum: register number to read
+ *
+ * NOTE: MUST NOT be called from interrupt context,
* because the bus read/write functions may wait for an interrupt
- * to conclude the operation. */
+ * to conclude the operation.
+ */
int phy_read(struct phy_device *phydev, u16 regnum)
{
int retval;
}
EXPORT_SYMBOL(phy_read);
+/**
+ * phy_write - Convenience function for writing a given PHY register
+ * @phydev: the phy_device struct
+ * @regnum: register number to write
+ * @val: value to write to @regnum
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ */
int phy_write(struct phy_device *phydev, u16 regnum, u16 val)
{
int err;
}
EXPORT_SYMBOL(phy_write);
-
+/**
+ * phy_clear_interrupt - Ack the phy device's interrupt
+ * @phydev: the phy_device struct
+ *
+ * If the @phydev driver has an ack_interrupt function, call it to
+ * ack and clear the phy device's interrupt.
+ *
+ * Returns 0 on success on < 0 on error.
+ */
int phy_clear_interrupt(struct phy_device *phydev)
{
int err = 0;
return err;
}
-
+/**
+ * phy_config_interrupt - configure the PHY device for the requested interrupts
+ * @phydev: the phy_device struct
+ * @interrupts: interrupt flags to configure for this @phydev
+ *
+ * Returns 0 on success on < 0 on error.
+ */
int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
{
int err = 0;
}
-/* phy_aneg_done
+/**
+ * phy_aneg_done - return auto-negotiation status
+ * @phydev: target phy_device struct
*
- * description: Reads the status register and returns 0 either if
+ * Description: Reads the status register and returns 0 either if
* auto-negotiation is incomplete, or if there was an error.
* Returns BMSR_ANEGCOMPLETE if auto-negotiation is done.
*/
#define MAX_NUM_SETTINGS (sizeof(settings)/sizeof(struct phy_setting))
-/* phy_find_setting
+/**
+ * phy_find_setting - find a PHY settings array entry that matches speed & duplex
+ * @speed: speed to match
+ * @duplex: duplex to match
*
- * description: Searches the settings array for the setting which
+ * Description: Searches the settings array for the setting which
* matches the desired speed and duplex, and returns the index
* of that setting. Returns the index of the last setting if
* none of the others match.
return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
}
-/* phy_find_valid
- * idx: The first index in settings[] to search
- * features: A mask of the valid settings
+/**
+ * phy_find_valid - find a PHY setting that matches the requested features mask
+ * @idx: The first index in settings[] to search
+ * @features: A mask of the valid settings
*
- * description: Returns the index of the first valid setting less
+ * Description: Returns the index of the first valid setting less
* than or equal to the one pointed to by idx, as determined by
* the mask in features. Returns the index of the last setting
* if nothing else matches.
return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
}
-/* phy_sanitize_settings
+/**
+ * phy_sanitize_settings - make sure the PHY is set to supported speed and duplex
+ * @phydev: the target phy_device struct
*
- * description: Make sure the PHY is set to supported speeds and
+ * Description: Make sure the PHY is set to supported speeds and
* duplexes. Drop down by one in this order: 1000/FULL,
- * 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF
+ * 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF.
*/
void phy_sanitize_settings(struct phy_device *phydev)
{
/* Sanitize settings based on PHY capabilities */
if ((features & SUPPORTED_Autoneg) == 0)
- phydev->autoneg = 0;
+ phydev->autoneg = AUTONEG_DISABLE;
idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex),
features);
}
EXPORT_SYMBOL(phy_sanitize_settings);
-/* phy_ethtool_sset:
- * A generic ethtool sset function. Handles all the details
+/**
+ * phy_ethtool_sset - generic ethtool sset function, handles all the details
+ * @phydev: target phy_device struct
+ * @cmd: ethtool_cmd
*
* A few notes about parameter checking:
* - We don't set port or transceiver, so we don't care what they
* were set to.
* - phy_start_aneg() will make sure forced settings are sane, and
* choose the next best ones from the ones selected, so we don't
- * care if ethtool tries to give us bad values
- *
+ * care if ethtool tries to give us bad values.
*/
int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
{
}
EXPORT_SYMBOL(phy_ethtool_gset);
-/* Note that this function is currently incompatible with the
+/**
+ * phy_mii_ioctl - generic PHY MII ioctl interface
+ * @phydev: the phy_device struct
+ * @mii_data: MII ioctl data
+ * @cmd: ioctl cmd to execute
+ *
+ * Note that this function is currently incompatible with the
* PHYCONTROL layer. It changes registers without regard to
- * current state. Use at own risk
+ * current state. Use at own risk.
*/
int phy_mii_ioctl(struct phy_device *phydev,
struct mii_ioctl_data *mii_data, int cmd)
if (mii_data->phy_id == phydev->addr) {
switch(mii_data->reg_num) {
case MII_BMCR:
- if (val & (BMCR_RESET|BMCR_ANENABLE))
+ if ((val & (BMCR_RESET|BMCR_ANENABLE)) == 0)
phydev->autoneg = AUTONEG_DISABLE;
else
phydev->autoneg = AUTONEG_ENABLE;
phydev->duplex = DUPLEX_FULL;
else
phydev->duplex = DUPLEX_HALF;
+ if ((!phydev->autoneg) &&
+ (val & BMCR_SPEED1000))
+ phydev->speed = SPEED_1000;
+ else if ((!phydev->autoneg) &&
+ (val & BMCR_SPEED100))
+ phydev->speed = SPEED_100;
break;
case MII_ADVERTISE:
phydev->advertising = val;
return 0;
}
-/* phy_start_aneg
+/**
+ * phy_start_aneg - start auto-negotiation for this PHY device
+ * @phydev: the phy_device struct
*
- * description: Sanitizes the settings (if we're not
- * autonegotiating them), and then calls the driver's
- * config_aneg function. If the PHYCONTROL Layer is operating,
- * we change the state to reflect the beginning of
- * Auto-negotiation or forcing.
+ * Description: Sanitizes the settings (if we're not autonegotiating
+ * them), and then calls the driver's config_aneg function.
+ * If the PHYCONTROL Layer is operating, we change the state to
+ * reflect the beginning of Auto-negotiation or forcing.
*/
int phy_start_aneg(struct phy_device *phydev)
{
static void phy_change(struct work_struct *work);
static void phy_timer(unsigned long data);
-/* phy_start_machine:
+/**
+ * phy_start_machine - start PHY state machine tracking
+ * @phydev: the phy_device struct
+ * @handler: callback function for state change notifications
*
- * description: The PHY infrastructure can run a state machine
+ * Description: The PHY infrastructure can run a state machine
* which tracks whether the PHY is starting up, negotiating,
* etc. This function starts the timer which tracks the state
- * of the PHY. If you want to be notified when the state
- * changes, pass in the callback, otherwise, pass NULL. If you
+ * of the PHY. If you want to be notified when the state changes,
+ * pass in the callback @handler, otherwise, pass NULL. If you
* want to maintain your own state machine, do not call this
- * function. */
+ * function.
+ */
void phy_start_machine(struct phy_device *phydev,
void (*handler)(struct net_device *))
{
mod_timer(&phydev->phy_timer, jiffies + HZ);
}
-/* phy_stop_machine
+/**
+ * phy_stop_machine - stop the PHY state machine tracking
+ * @phydev: target phy_device struct
*
- * description: Stops the state machine timer, sets the state to UP
+ * Description: Stops the state machine timer, sets the state to UP
* (unless it wasn't up yet). This function must be called BEFORE
* phy_detach.
*/
phydev->adjust_state = NULL;
}
-/* phy_force_reduction
+/**
+ * phy_force_reduction - reduce PHY speed/duplex settings by one step
+ * @phydev: target phy_device struct
*
- * description: Reduces the speed/duplex settings by
- * one notch. The order is so:
- * 1000/FULL, 1000/HALF, 100/FULL, 100/HALF,
- * 10/FULL, 10/HALF. The function bottoms out at 10/HALF.
+ * Description: Reduces the speed/duplex settings by one notch,
+ * in this order--
+ * 1000/FULL, 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF.
+ * The function bottoms out at 10/HALF.
*/
static void phy_force_reduction(struct phy_device *phydev)
{
}
-/* phy_error:
+/**
+ * phy_error - enter HALTED state for this PHY device
+ * @phydev: target phy_device struct
*
* Moves the PHY to the HALTED state in response to a read
* or write error, and tells the controller the link is down.
spin_unlock(&phydev->lock);
}
-/* phy_interrupt
+/**
+ * phy_interrupt - PHY interrupt handler
+ * @irq: interrupt line
+ * @phy_dat: phy_device pointer
*
- * description: When a PHY interrupt occurs, the handler disables
+ * Description: When a PHY interrupt occurs, the handler disables
* interrupts, and schedules a work task to clear the interrupt.
*/
static irqreturn_t phy_interrupt(int irq, void *phy_dat)
return IRQ_HANDLED;
}
-/* Enable the interrupts from the PHY side */
+/**
+ * phy_enable_interrupts - Enable the interrupts from the PHY side
+ * @phydev: target phy_device struct
+ */
int phy_enable_interrupts(struct phy_device *phydev)
{
int err;
}
EXPORT_SYMBOL(phy_enable_interrupts);
-/* Disable the PHY interrupts from the PHY side */
+/**
+ * phy_disable_interrupts - Disable the PHY interrupts from the PHY side
+ * @phydev: target phy_device struct
+ */
int phy_disable_interrupts(struct phy_device *phydev)
{
int err;
}
EXPORT_SYMBOL(phy_disable_interrupts);
-/* phy_start_interrupts
+/**
+ * phy_start_interrupts - request and enable interrupts for a PHY device
+ * @phydev: target phy_device struct
*
- * description: Request the interrupt for the given PHY. If
- * this fails, then we set irq to PHY_POLL.
+ * Description: Request the interrupt for the given PHY.
+ * If this fails, then we set irq to PHY_POLL.
* Otherwise, we enable the interrupts in the PHY.
- * Returns 0 on success.
* This should only be called with a valid IRQ number.
+ * Returns 0 on success or < 0 on error.
*/
int phy_start_interrupts(struct phy_device *phydev)
{
}
EXPORT_SYMBOL(phy_start_interrupts);
+/**
+ * phy_stop_interrupts - disable interrupts from a PHY device
+ * @phydev: target phy_device struct
+ */
int phy_stop_interrupts(struct phy_device *phydev)
{
int err;
phy_error(phydev);
/*
- * Finish any pending work; we might have been scheduled
- * to be called from keventd ourselves, though.
+ * Finish any pending work; we might have been scheduled to be called
+ * from keventd ourselves, but cancel_work_sync() handles that.
*/
- run_scheduled_work(&phydev->phy_queue);
+ cancel_work_sync(&phydev->phy_queue);
free_irq(phydev->irq, phydev);
EXPORT_SYMBOL(phy_stop_interrupts);
-/* Scheduled by the phy_interrupt/timer to handle PHY changes */
+/**
+ * phy_change - Scheduled by the phy_interrupt/timer to handle PHY changes
+ * @work: work_struct that describes the work to be done
+ */
static void phy_change(struct work_struct *work)
{
int err;
phy_error(phydev);
}
-/* Bring down the PHY link, and stop checking the status. */
+/**
+ * phy_stop - Bring down the PHY link, and stop checking the status
+ * @phydev: target phy_device struct
+ */
void phy_stop(struct phy_device *phydev)
{
spin_lock(&phydev->lock);
}
-/* phy_start
+/**
+ * phy_start - start or restart a PHY device
+ * @phydev: target phy_device struct
*
- * description: Indicates the attached device's readiness to
+ * Description: Indicates the attached device's readiness to
* handle PHY-related work. Used during startup to start the
* PHY, and after a call to phy_stop() to resume operation.
* Also used to indicate the MDIO bus has cleared an error
projects / linux-2.6-omap-h63xx.git / blobdiff