#include "h/skversion.h"
+#include <linux/in.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
-#include <linux/proc_fs.h>
#include <linux/dma-mapping.h>
#include <linux/ip.h>
static struct net_device_stats *SkGeStats(struct SK_NET_DEVICE *dev);
static int SkGeIoctl(struct SK_NET_DEVICE *dev, struct ifreq *rq, int cmd);
static void GetConfiguration(SK_AC*);
-static void ProductStr(SK_AC*);
static int XmitFrame(SK_AC*, TX_PORT*, struct sk_buff*);
static void FreeTxDescriptors(SK_AC*pAC, TX_PORT*);
static void FillRxRing(SK_AC*, RX_PORT*);
* Extern Function Prototypes
*
******************************************************************************/
-static const char SKRootName[] = "net/sk98lin";
-static struct proc_dir_entry *pSkRootDir;
-extern struct file_operations sk_proc_fops;
-
-static inline void SkGeProcCreate(struct net_device *dev)
-{
- struct proc_dir_entry *pe;
-
- if (pSkRootDir &&
- (pe = create_proc_entry(dev->name, S_IRUGO, pSkRootDir))) {
- pe->proc_fops = &sk_proc_fops;
- pe->data = dev;
- pe->owner = THIS_MODULE;
- }
-}
-
-static inline void SkGeProcRemove(struct net_device *dev)
-{
- if (pSkRootDir)
- remove_proc_entry(dev->name, pSkRootDir);
-}
-
extern void SkDimEnableModerationIfNeeded(SK_AC *pAC);
extern void SkDimDisplayModerationSettings(SK_AC *pAC);
extern void SkDimStartModerationTimer(SK_AC *pAC);
static uintptr_t TxQueueAddr[SK_MAX_MACS][2] = {{0x680, 0x600},{0x780, 0x700}};
static uintptr_t RxQueueAddr[SK_MAX_MACS] = {0x400, 0x480};
+/*****************************************************************************
+ *
+ * SkPciWriteCfgDWord - write a 32 bit value to pci config space
+ *
+ * Description:
+ * This routine writes a 32 bit value to the pci configuration
+ * space.
+ *
+ * Returns:
+ * 0 - indicate everything worked ok.
+ * != 0 - error indication
+ */
+static inline int SkPciWriteCfgDWord(
+SK_AC *pAC, /* Adapter Control structure pointer */
+int PciAddr, /* PCI register address */
+SK_U32 Val) /* pointer to store the read value */
+{
+ pci_write_config_dword(pAC->PciDev, PciAddr, Val);
+ return(0);
+} /* SkPciWriteCfgDWord */
+
/*****************************************************************************
*
* SkGeInitPCI - Init the PCI resources
* Description:
* This function initialize the PCI resources and IO
*
- * Returns: N/A
- *
+ * Returns:
+ * 0 - indicate everything worked ok.
+ * != 0 - error indication
*/
-int SkGeInitPCI(SK_AC *pAC)
+static __devinit int SkGeInitPCI(SK_AC *pAC)
{
struct SK_NET_DEVICE *dev = pAC->dev[0];
struct pci_dev *pdev = pAC->PciDev;
int retval;
- if (pci_enable_device(pdev) != 0) {
- return 1;
- }
-
dev->mem_start = pci_resource_start (pdev, 0);
pci_set_master(pdev);
- if (pci_request_regions(pdev, pAC->Name) != 0) {
- retval = 2;
- goto out_disable;
- }
+ retval = pci_request_regions(pdev, "sk98lin");
+ if (retval)
+ goto out;
#ifdef SK_BIG_ENDIAN
/*
* Remap the regs into kernel space.
*/
pAC->IoBase = ioremap_nocache(dev->mem_start, 0x4000);
-
- if (!pAC->IoBase){
- retval = 3;
+ if (!pAC->IoBase) {
+ retval = -EIO;
goto out_release;
}
out_release:
pci_release_regions(pdev);
- out_disable:
- pci_disable_device(pdev);
+ out:
return retval;
}
* 0, if everything is ok
* !=0, on error
*/
-static int __init SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC)
+static int __devinit SkGeBoardInit(struct SK_NET_DEVICE *dev, SK_AC *pAC)
{
short i;
unsigned long Flags;
if (SkGeInit(pAC, pAC->IoBase, SK_INIT_DATA) != 0) {
printk("HWInit (0) failed.\n");
spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
- return(-EAGAIN);
+ return -EIO;
}
SkI2cInit( pAC, pAC->IoBase, SK_INIT_DATA);
SkEventInit(pAC, pAC->IoBase, SK_INIT_DATA);
if (SkGeInit(pAC, pAC->IoBase, SK_INIT_IO) != 0) {
printk("sk98lin: HWInit (1) failed.\n");
spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
- return(-EAGAIN);
+ return -EIO;
}
SkI2cInit( pAC, pAC->IoBase, SK_INIT_IO);
SkEventInit(pAC, pAC->IoBase, SK_INIT_IO);
spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
if (pAC->GIni.GIMacsFound == 2) {
- Ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, pAC->Name, dev);
+ Ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, "sk98lin", dev);
} else if (pAC->GIni.GIMacsFound == 1) {
Ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ,
- pAC->Name, dev);
+ "sk98lin", dev);
} else {
printk(KERN_WARNING "sk98lin: Illegal number of ports: %d\n",
pAC->GIni.GIMacsFound);
- return -EAGAIN;
+ return -EIO;
}
if (Ret) {
printk(KERN_WARNING "sk98lin: Requested IRQ %d is busy.\n",
dev->irq);
- return -EAGAIN;
+ return Ret;
}
pAC->AllocFlag |= SK_ALLOC_IRQ;
/* Alloc memory for this board (Mem for RxD/TxD) : */
if(!BoardAllocMem(pAC)) {
printk("No memory for descriptor rings.\n");
- return(-EAGAIN);
+ return -ENOMEM;
}
BoardInitMem(pAC);
DualNet)) {
BoardFreeMem(pAC);
printk("sk98lin: SkGeInitAssignRamToQueues failed.\n");
- return(-EAGAIN);
+ return -EIO;
}
return (0);
* SK_TRUE, if all memory could be allocated
* SK_FALSE, if not
*/
-static SK_BOOL BoardAllocMem(
-SK_AC *pAC)
+static __devinit SK_BOOL BoardAllocMem(SK_AC *pAC)
{
caddr_t pDescrMem; /* pointer to descriptor memory area */
size_t AllocLength; /* length of complete descriptor area */
*
* Returns: N/A
*/
-static void BoardInitMem(
-SK_AC *pAC) /* pointer to adapter context */
+static __devinit void BoardInitMem(SK_AC *pAC)
{
int i; /* loop counter */
int RxDescrSize; /* the size of a rx descriptor rounded up to alignment*/
spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
pAC->MaxPorts++;
- pNet->Up = 1;
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ENTRY,
sizeof(SK_PNMI_STRUCT_DATA));
pAC->MaxPorts--;
- pNet->Up = 0;
return (0);
} /* SkGeClose */
pTxd->VDataHigh = (SK_U32) (PhysAddr >> 32);
pTxd->pMBuf = pMessage;
- pTxd->TBControl = Control | BMU_OWN | sk_frag->size;;
+ pTxd->TBControl = Control | BMU_OWN | sk_frag->size;
/*
** Do we have the last fragment?
pMsg->ip_summed = CHECKSUM_NONE;
#endif
-
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, 1,("V"));
ForRlmt = SK_RLMT_RX_PROTOCOL;
#if 0
static int SkGeChangeMtu(struct SK_NET_DEVICE *dev, int NewMtu)
{
DEV_NET *pNet;
-DEV_NET *pOtherNet;
+struct net_device *pOtherDev;
SK_AC *pAC;
unsigned long Flags;
int i;
}
#endif
- pNet->Mtu = NewMtu;
- pOtherNet = netdev_priv(pAC->dev[1 - pNet->NetNr]);
- if ((pOtherNet->Mtu>1500) && (NewMtu<=1500) && (pOtherNet->Up==1)) {
- return(0);
- }
+ pOtherDev = pAC->dev[1 - pNet->NetNr];
+
+ if ( netif_running(pOtherDev) && (pOtherDev->mtu > 1500)
+ && (NewMtu <= 1500))
+ return 0;
pAC->RxBufSize = NewMtu + 32;
dev->mtu = NewMtu;
EvPara.Para32[1] = -1;
SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
- if (pOtherNet->Up) {
+ if (netif_running(pOtherDev)) {
+ DEV_NET *pOtherNet = netdev_priv(pOtherDev);
EvPara.Para32[0] = pOtherNet->PortNr;
SkEventQueue(pAC, SKGE_RLMT, SK_RLMT_START, EvPara);
}
pAC->stats.rx_bytes = (SK_U32) pPnmiStruct->RxOctetsDeliveredCts;
pAC->stats.tx_bytes = (SK_U32) pPnmiStat->StatTxOctetsOkCts;
- if (pNet->Mtu <= 1500) {
+ if (dev->mtu <= 1500) {
pAC->stats.rx_errors = (SK_U32) pPnmiStruct->InErrorsCts & 0xFFFFFFFF;
} else {
pAC->stats.rx_errors = (SK_U32) ((pPnmiStruct->InErrorsCts -
* Description:
* This function is called if an ioctl is issued on the device.
* There are three subfunction for reading, writing and test-writing
- * the private MIB data structure (usefull for SysKonnect-internal tools).
+ * the private MIB data structure (useful for SysKonnect-internal tools).
*
* Returns:
* 0, if everything is ok
*
* Returns: N/A
*/
-static void ProductStr(
-SK_AC *pAC /* pointer to adapter context */
+static inline int ProductStr(
+ SK_AC *pAC, /* pointer to adapter context */
+ char *DeviceStr, /* result string */
+ int StrLen /* length of the string */
)
{
-int StrLen = 80; /* length of the string, defined in SK_AC */
char Keyword[] = VPD_NAME; /* vpd productname identifier */
int ReturnCode; /* return code from vpd_read */
unsigned long Flags;
spin_lock_irqsave(&pAC->SlowPathLock, Flags);
- ReturnCode = VpdRead(pAC, pAC->IoBase, Keyword, pAC->DeviceStr,
- &StrLen);
+ ReturnCode = VpdRead(pAC, pAC->IoBase, Keyword, DeviceStr, &StrLen);
spin_unlock_irqrestore(&pAC->SlowPathLock, Flags);
- if (ReturnCode != 0) {
- /* there was an error reading the vpd data */
- SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_ERROR,
- ("Error reading VPD data: %d\n", ReturnCode));
- pAC->DeviceStr[0] = '\0';
- }
+
+ return ReturnCode;
} /* ProductStr */
/*****************************************************************************
} /* SkPciReadCfgByte */
-/*****************************************************************************
- *
- * SkPciWriteCfgDWord - write a 32 bit value to pci config space
- *
- * Description:
- * This routine writes a 32 bit value to the pci configuration
- * space.
- *
- * Returns:
- * 0 - indicate everything worked ok.
- * != 0 - error indication
- */
-int SkPciWriteCfgDWord(
-SK_AC *pAC, /* Adapter Control structure pointer */
-int PciAddr, /* PCI register address */
-SK_U32 Val) /* pointer to store the read value */
-{
- pci_write_config_dword(pAC->PciDev, PciAddr, Val);
- return(0);
-} /* SkPciWriteCfgDWord */
-
-
/*****************************************************************************
*
* SkPciWriteCfgWord - write a 16 bit value to pci config space
Flags);
break;
case SK_DRV_NET_UP: /* SK_U32 PortIdx */
+ { struct net_device *dev = pAC->dev[Param.Para32[0]];
/* action list 5 */
FromPort = Param.Para32[0];
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
printk(" irq moderation: disabled\n");
-#ifdef SK_ZEROCOPY
- if (pAC->ChipsetType)
-#ifdef USE_SK_TX_CHECKSUM
- printk(" scatter-gather: enabled\n");
-#else
- printk(" tx-checksum: disabled\n");
-#endif
- else
- printk(" scatter-gather: disabled\n");
-#else
- printk(" scatter-gather: disabled\n");
-#endif
-
-#ifndef USE_SK_RX_CHECKSUM
- printk(" rx-checksum: disabled\n");
-#endif
+ printk(" scatter-gather: %s\n",
+ (dev->features & NETIF_F_SG) ? "enabled" : "disabled");
+ printk(" tx-checksum: %s\n",
+ (dev->features & NETIF_F_IP_CSUM) ? "enabled" : "disabled");
+ printk(" rx-checksum: %s\n",
+ pAC->RxPort[Param.Para32[0]].RxCsum ? "enabled" : "disabled");
} else {
DoPrintInterfaceChange = SK_TRUE;
}
/* Inform the world that link protocol is up. */
- netif_carrier_on(pAC->dev[Param.Para32[0]]);
-
+ netif_carrier_on(dev);
break;
+ }
case SK_DRV_NET_DOWN: /* SK_U32 Reason */
/* action list 7 */
SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT,
pAC->DiagModeActive = DIAG_ACTIVE;
if (pAC->BoardLevel > SK_INIT_DATA) {
- if (pNet->Up) {
+ if (netif_running(pAC->dev[0])) {
pAC->WasIfUp[0] = SK_TRUE;
pAC->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */
DoPrintInterfaceChange = SK_FALSE;
}
if (pNet != netdev_priv(pAC->dev[1])) {
pNet = netdev_priv(pAC->dev[1]);
- if (pNet->Up) {
+ if (netif_running(pAC->dev[1])) {
pAC->WasIfUp[1] = SK_TRUE;
pAC->DiagFlowCtrl = SK_TRUE; /* for SkGeClose */
DoPrintInterfaceChange = SK_FALSE;
struct net_device *dev = NULL;
static int boards_found = 0;
int error = -ENODEV;
+ int using_dac = 0;
+ char DeviceStr[80];
if (pci_enable_device(pdev))
goto out;
/* Configure DMA attributes. */
- if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) &&
- pci_set_dma_mask(pdev, DMA_32BIT_MASK))
- goto out_disable_device;
-
+ if (sizeof(dma_addr_t) > sizeof(u32) &&
+ !(error = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
+ using_dac = 1;
+ error = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+ if (error < 0) {
+ printk(KERN_ERR "sk98lin %s unable to obtain 64 bit DMA "
+ "for consistent allocations\n", pci_name(pdev));
+ goto out_disable_device;
+ }
+ } else {
+ error = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (error) {
+ printk(KERN_ERR "sk98lin %s no usable DMA configuration\n",
+ pci_name(pdev));
+ goto out_disable_device;
+ }
+ }
- if ((dev = alloc_etherdev(sizeof(DEV_NET))) == NULL) {
- printk(KERN_ERR "Unable to allocate etherdev "
+ error = -ENOMEM;
+ dev = alloc_etherdev(sizeof(DEV_NET));
+ if (!dev) {
+ printk(KERN_ERR "sk98lin: unable to allocate etherdev "
"structure!\n");
goto out_disable_device;
}
pNet = netdev_priv(dev);
- pNet->pAC = kmalloc(sizeof(SK_AC), GFP_KERNEL);
+ pNet->pAC = kzalloc(sizeof(SK_AC), GFP_KERNEL);
if (!pNet->pAC) {
- printk(KERN_ERR "Unable to allocate adapter "
+ printk(KERN_ERR "sk98lin: unable to allocate adapter "
"structure!\n");
goto out_free_netdev;
}
- memset(pNet->pAC, 0, sizeof(SK_AC));
pAC = pNet->pAC;
pAC->PciDev = pdev;
- pAC->PciDevId = pdev->device;
+
pAC->dev[0] = dev;
pAC->dev[1] = dev;
- sprintf(pAC->Name, "SysKonnect SK-98xx");
pAC->CheckQueue = SK_FALSE;
- pNet->Mtu = 1500;
- pNet->Up = 0;
dev->irq = pdev->irq;
+
error = SkGeInitPCI(pAC);
if (error) {
printk(KERN_ERR "sk98lin: PCI setup failed: %i\n", error);
SET_NETDEV_DEV(dev, &pdev->dev);
SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps);
-#ifdef SK_ZEROCOPY
-#ifdef USE_SK_TX_CHECKSUM
+ /* Use only if yukon hardware */
if (pAC->ChipsetType) {
- /* Use only if yukon hardware */
- /* SK and ZEROCOPY - fly baby... */
- dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
- }
+#ifdef USE_SK_TX_CHECKSUM
+ dev->features |= NETIF_F_IP_CSUM;
+#endif
+#ifdef SK_ZEROCOPY
+ dev->features |= NETIF_F_SG;
#endif
+#ifdef USE_SK_RX_CHECKSUM
+ pAC->RxPort[0].RxCsum = 1;
#endif
+ }
+
+ if (using_dac)
+ dev->features |= NETIF_F_HIGHDMA;
pAC->Index = boards_found++;
- if (SkGeBoardInit(dev, pAC))
+ error = SkGeBoardInit(dev, pAC);
+ if (error)
goto out_free_netdev;
+ /* Read Adapter name from VPD */
+ if (ProductStr(pAC, DeviceStr, sizeof(DeviceStr)) != 0) {
+ error = -EIO;
+ printk(KERN_ERR "sk98lin: Could not read VPD data.\n");
+ goto out_free_resources;
+ }
+
/* Register net device */
- if (register_netdev(dev)) {
+ error = register_netdev(dev);
+ if (error) {
printk(KERN_ERR "sk98lin: Could not register device.\n");
goto out_free_resources;
}
/* Print adapter specific string from vpd */
- ProductStr(pAC);
- printk("%s: %s\n", dev->name, pAC->DeviceStr);
+ printk("%s: %s\n", dev->name, DeviceStr);
/* Print configuration settings */
printk(" PrefPort:%c RlmtMode:%s\n",
memcpy(&dev->dev_addr, &pAC->Addr.Net[0].CurrentMacAddress, 6);
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
- SkGeProcCreate(dev);
-
pNet->PortNr = 0;
pNet->NetNr = 0;
boards_found++;
+ pci_set_drvdata(pdev, dev);
+
/* More then one port found */
if ((pAC->GIni.GIMacsFound == 2 ) && (pAC->RlmtNets == 2)) {
- if ((dev = alloc_etherdev(sizeof(DEV_NET))) == 0) {
- printk(KERN_ERR "Unable to allocate etherdev "
+ dev = alloc_etherdev(sizeof(DEV_NET));
+ if (!dev) {
+ printk(KERN_ERR "sk98lin: unable to allocate etherdev "
"structure!\n");
- goto out;
+ goto single_port;
}
- pAC->dev[1] = dev;
pNet = netdev_priv(dev);
pNet->PortNr = 1;
pNet->NetNr = 1;
pNet->pAC = pAC;
- pNet->Mtu = 1500;
- pNet->Up = 0;
dev->open = &SkGeOpen;
dev->stop = &SkGeClose;
SET_NETDEV_DEV(dev, &pdev->dev);
SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps);
-#ifdef SK_ZEROCOPY
-#ifdef USE_SK_TX_CHECKSUM
if (pAC->ChipsetType) {
- /* SG and ZEROCOPY - fly baby... */
- dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
- }
+#ifdef USE_SK_TX_CHECKSUM
+ dev->features |= NETIF_F_IP_CSUM;
+#endif
+#ifdef SK_ZEROCOPY
+ dev->features |= NETIF_F_SG;
#endif
+#ifdef USE_SK_RX_CHECKSUM
+ pAC->RxPort[1].RxCsum = 1;
#endif
+ }
+
+ if (using_dac)
+ dev->features |= NETIF_F_HIGHDMA;
- if (register_netdev(dev)) {
- printk(KERN_ERR "sk98lin: Could not register device for seconf port.\n");
+ error = register_netdev(dev);
+ if (error) {
+ printk(KERN_ERR "sk98lin: Could not register device"
+ " for second port. (%d)\n", error);
free_netdev(dev);
- pAC->dev[1] = pAC->dev[0];
- } else {
- SkGeProcCreate(dev);
- memcpy(&dev->dev_addr,
- &pAC->Addr.Net[1].CurrentMacAddress, 6);
- memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
-
- printk("%s: %s\n", dev->name, pAC->DeviceStr);
- printk(" PrefPort:B RlmtMode:Dual Check Link State\n");
+ goto single_port;
}
+
+ pAC->dev[1] = dev;
+ memcpy(&dev->dev_addr,
+ &pAC->Addr.Net[1].CurrentMacAddress, 6);
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
+ printk("%s: %s\n", dev->name, DeviceStr);
+ printk(" PrefPort:B RlmtMode:Dual Check Link State\n");
}
+single_port:
+
/* Save the hardware revision */
pAC->HWRevision = (((pAC->GIni.GIPciHwRev >> 4) & 0x0F)*10) +
(pAC->GIni.GIPciHwRev & 0x0F);
memset(&pAC->PnmiBackup, 0, sizeof(SK_PNMI_STRUCT_DATA));
memcpy(&pAC->PnmiBackup, &pAC->PnmiStruct, sizeof(SK_PNMI_STRUCT_DATA));
- pci_set_drvdata(pdev, dev);
return 0;
out_free_resources:
SK_AC *pAC = pNet->pAC;
struct net_device *otherdev = pAC->dev[1];
- SkGeProcRemove(dev);
unregister_netdev(dev);
- if (otherdev != dev)
- SkGeProcRemove(otherdev);
SkGeYellowLED(pAC, pAC->IoBase, 0);
pci_enable_device(pdev);
pci_set_master(pdev);
if (pAC->GIni.GIMacsFound == 2)
- ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, pAC->Name, dev);
+ ret = request_irq(dev->irq, SkGeIsr, SA_SHIRQ, "sk98lin", dev);
else
- ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ, pAC->Name, dev);
+ ret = request_irq(dev->irq, SkGeIsrOnePort, SA_SHIRQ, "sk98lin", dev);
if (ret) {
printk(KERN_WARNING "sk98lin: unable to acquire IRQ %d\n", dev->irq);
pAC->AllocFlag &= ~SK_ALLOC_IRQ;
static int __init skge_init(void)
{
- int error;
-
- pSkRootDir = proc_mkdir(SKRootName, NULL);
- if (pSkRootDir)
- pSkRootDir->owner = THIS_MODULE;
-
- error = pci_register_driver(&skge_driver);
- if (error)
- remove_proc_entry(SKRootName, NULL);
- return error;
+ return pci_module_init(&skge_driver);
}
static void __exit skge_exit(void)
{
pci_unregister_driver(&skge_driver);
- remove_proc_entry(SKRootName, NULL);
-
}
module_init(skge_init);
projects / linux-2.6-omap-h63xx.git / blobdiff