#include "sky2.h"
#define DRV_NAME "sky2"
-#define DRV_VERSION "1.19"
+#define DRV_VERSION "1.20"
#define PFX DRV_NAME " "
/*
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4360) }, /* 88E8052 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4361) }, /* 88E8050 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436C) }, /* 88E8072 */
{ 0 }
};
static void sky2_set_multicast(struct net_device *dev);
-/* Access to external PHY */
+/* Access to PHY via serial interconnect */
static int gm_phy_write(struct sky2_hw *hw, unsigned port, u16 reg, u16 val)
{
int i;
GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg));
for (i = 0; i < PHY_RETRIES; i++) {
- if (!(gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY))
+ u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
+ if (ctrl == 0xffff)
+ goto io_error;
+
+ if (!(ctrl & GM_SMI_CT_BUSY))
return 0;
- udelay(1);
+
+ udelay(10);
}
- printk(KERN_WARNING PFX "%s: phy write timeout\n", hw->dev[port]->name);
+ dev_warn(&hw->pdev->dev,"%s: phy write timeout\n", hw->dev[port]->name);
return -ETIMEDOUT;
+
+io_error:
+ dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
+ return -EIO;
}
static int __gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg, u16 *val)
| GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
for (i = 0; i < PHY_RETRIES; i++) {
- if (gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) {
+ u16 ctrl = gma_read16(hw, port, GM_SMI_CTRL);
+ if (ctrl == 0xffff)
+ goto io_error;
+
+ if (ctrl & GM_SMI_CT_RD_VAL) {
*val = gma_read16(hw, port, GM_SMI_DATA);
return 0;
}
- udelay(1);
+ udelay(10);
}
+ dev_warn(&hw->pdev->dev, "%s: phy read timeout\n", hw->dev[port]->name);
return -ETIMEDOUT;
+io_error:
+ dev_err(&hw->pdev->dev, "%s: phy I/O error\n", hw->dev[port]->name);
+ return -EIO;
}
-static u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
+static inline u16 gm_phy_read(struct sky2_hw *hw, unsigned port, u16 reg)
{
u16 v;
-
- if (__gm_phy_read(hw, port, reg, &v) != 0)
- printk(KERN_WARNING PFX "%s: phy read timeout\n", hw->dev[port]->name);
+ __gm_phy_read(hw, port, reg, &v);
return v;
}
/* disable all GMAC IRQ's */
sky2_write8(hw, SK_REG(port, GMAC_IRQ_MSK), 0);
- /* disable PHY IRQs */
- gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);
gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */
gma_write16(hw, port, GM_MC_ADDR_H2, 0);
sky2_write8(hw, SK_REG(port, LNK_LED_REG),
LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
- if (hw->flags & SKY2_HW_NEWER_PHY) {
- u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
- u16 led = PHY_M_LEDC_LOS_CTRL(1); /* link active */
-
- switch(sky2->speed) {
- case SPEED_10:
- led |= PHY_M_LEDC_INIT_CTRL(7);
- break;
-
- case SPEED_100:
- led |= PHY_M_LEDC_STA1_CTRL(7);
- break;
-
- case SPEED_1000:
- led |= PHY_M_LEDC_STA0_CTRL(7);
- break;
- }
-
- gm_phy_write(hw, port, PHY_MARV_EXT_ADR, 3);
- gm_phy_write(hw, port, PHY_MARV_PHY_CTRL, led);
- gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
- }
-
if (netif_msg_link(sky2))
printk(KERN_INFO PFX
"%s: Link is up at %d Mbps, %s duplex, flow control %s\n",
do {
struct sky2_port *sky2;
struct sky2_status_le *le = hw->st_le + hw->st_idx;
- unsigned port = le->css & CSS_LINK_BIT;
+ unsigned port;
struct net_device *dev;
struct sk_buff *skb;
u32 status;
u16 length;
+ u8 opcode = le->opcode;
+
+ if (!(opcode & HW_OWNER))
+ break;
hw->st_idx = RING_NEXT(hw->st_idx, STATUS_RING_SIZE);
+ port = le->css & CSS_LINK_BIT;
dev = hw->dev[port];
sky2 = netdev_priv(dev);
length = le16_to_cpu(le->length);
status = le32_to_cpu(le->status);
- switch (le->opcode & ~HW_OWNER) {
+ le->opcode = 0;
+ switch (opcode & ~HW_OWNER) {
case OP_RXSTAT:
++rx[port];
skb = sky2_receive(dev, length, status);
default:
if (net_ratelimit())
printk(KERN_WARNING PFX
- "unknown status opcode 0x%x\n", le->opcode);
+ "unknown status opcode 0x%x\n", opcode);
}
} while (hw->st_idx != idx);
if (status & Y2_IS_PCI_EXP) {
/* PCI-Express uncorrectable Error occurred */
- int pos = pci_find_aer_capability(hw->pdev);
+ int aer = pci_find_aer_capability(hw->pdev);
u32 err;
- pci_read_config_dword(pdev, pos + PCI_ERR_UNCOR_STATUS, &err);
+ if (aer) {
+ pci_read_config_dword(pdev, aer + PCI_ERR_UNCOR_STATUS,
+ &err);
+ pci_cleanup_aer_uncorrect_error_status(pdev);
+ } else {
+ /* Either AER not configured, or not working
+ * because of bad MMCONFIG, so just do recover
+ * manually.
+ */
+ err = sky2_read32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS);
+ sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
+ 0xfffffffful);
+ }
+
if (net_ratelimit())
dev_err(&pdev->dev, "PCI Express error (0x%x)\n", err);
- pci_cleanup_aer_uncorrect_error_status(pdev);
+
}
if (status & Y2_HWE_L1_MASK)
sky2_write8(hw, B0_CTST, CS_RST_SET);
sky2_write8(hw, B0_CTST, CS_RST_CLR);
+ /* allow writes to PCI config */
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+
/* clear PCI errors, if any */
pci_read_config_word(pdev, PCI_STATUS, &status);
status |= PCI_STATUS_ERROR_BITS;
cap = pci_find_capability(pdev, PCI_CAP_ID_EXP);
if (cap) {
- /* Check for advanced error reporting */
- pci_cleanup_aer_uncorrect_error_status(pdev);
- pci_cleanup_aer_correct_error_status(pdev);
+ if (pci_find_aer_capability(pdev)) {
+ /* Check for advanced error reporting */
+ pci_cleanup_aer_uncorrect_error_status(pdev);
+ pci_cleanup_aer_correct_error_status(pdev);
+ } else {
+ dev_warn(&pdev->dev,
+ "PCI Express Advanced Error Reporting"
+ " not configured or MMCONFIG problem?\n");
+
+ sky2_write32(hw, Y2_CFG_AER + PCI_ERR_UNCOR_STATUS,
+ 0xfffffffful);
+ }
/* If error bit is stuck on ignore it */
if (sky2_read32(hw, B0_HWE_ISRC) & Y2_IS_PCI_EXP)
dev->tx_timeout = sky2_tx_timeout;
dev->watchdog_timeo = TX_WATCHDOG;
#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = sky2_netpoll;
+ if (port == 0)
+ dev->poll_controller = sky2_netpoll;
#endif
sky2 = netdev_priv(dev);
projects / linux-2.6-omap-h63xx.git / blobdiff