dm9601: Fix receive MTU

[linux-2.6-omap-h63xx.git] / drivers / net / tulip / xircom_tulip_cb.c

diff --git a/drivers/net/tulip/xircom_tulip_cb.c b/drivers/net/tulip/xircom_tulip_cb.c
index 312788caa4c6fa792bfaa5174f626624dd5e25dc..fc439f333350ded1eae790db6268e035e597a876 100644 (file)
--- a/drivers/net/tulip/xircom_tulip_cb.c
+++ b/drivers/net/tulip/xircom_tulip_cb.c
@@ -65,7 +65,7 @@ static int rx_copybreak = 100;
 static int csr0 = 0x01A00000 | 0xE000;
 #elif defined(__powerpc__)
 static int csr0 = 0x01B00000 | 0x8000;
-#elif defined(__sparc__)
+#elif defined(CONFIG_SPARC)
 static int csr0 = 0x01B00080 | 0x8000;
 #elif defined(__i386__)
 static int csr0 = 0x01A00000 | 0x8000;
@@ -328,7 +328,7 @@ static void xircom_init_ring(struct net_device *dev);
 static int xircom_start_xmit(struct sk_buff *skb, struct net_device *dev);
 static int xircom_rx(struct net_device *dev);
 static void xircom_media_change(struct net_device *dev);
-static irqreturn_t xircom_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
+static irqreturn_t xircom_interrupt(int irq, void *dev_instance);
 static int xircom_close(struct net_device *dev);
 static struct net_device_stats *xircom_get_stats(struct net_device *dev);
 static int xircom_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
@@ -524,7 +524,6 @@ static int __devinit xircom_init_one(struct pci_dev *pdev, const struct pci_devi
        int chip_idx = id->driver_data;
        long ioaddr;
        int i;
-       u8 chip_rev;
 
 /* when built into the kernel, we only print version if device is found */
 #ifndef MODULE
@@ -620,9 +619,8 @@ static int __devinit xircom_init_one(struct pci_dev *pdev, const struct pci_devi
        if (register_netdev(dev))
                goto err_out_cleardev;
 
-       pci_read_config_byte(pdev, PCI_REVISION_ID, &chip_rev);
        printk(KERN_INFO "%s: %s rev %d at %#3lx,",
-              dev->name, xircom_tbl[chip_idx].chip_name, chip_rev, ioaddr);
+              dev->name, xircom_tbl[chip_idx].chip_name, pdev->revision, ioaddr);
        for (i = 0; i < 6; i++)
                printk("%c%2.2X", i ? ':' : ' ', dev->dev_addr[i]);
        printk(", IRQ %d.\n", dev->irq);
@@ -915,7 +913,9 @@ xircom_start_xmit(struct sk_buff *skb, struct net_device *dev)
 
        tp->tx_skbuff[entry] = skb;
        if (tp->chip_id == X3201_3) {
-               memcpy(tp->tx_aligned_skbuff[entry]->data,skb->data,skb->len);
+               skb_copy_from_linear_data(skb,
+                                         tp->tx_aligned_skbuff[entry]->data,
+                                         skb->len);
                tp->tx_ring[entry].buffer1 = virt_to_bus(tp->tx_aligned_skbuff[entry]->data);
        } else
                tp->tx_ring[entry].buffer1 = virt_to_bus(skb->data);
@@ -1044,7 +1044,7 @@ static void check_duplex(struct net_device *dev)
 
 /* The interrupt handler does all of the Rx thread work and cleans up
    after the Tx thread. */
-static irqreturn_t xircom_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
+static irqreturn_t xircom_interrupt(int irq, void *dev_instance)
 {
        struct net_device *dev = dev_instance;
        struct xircom_private *tp = netdev_priv(dev);
@@ -1238,11 +1238,10 @@ xircom_rx(struct net_device *dev)
                           to a minimally-sized skbuff. */
                        if (pkt_len < rx_copybreak
                                && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
-                               skb->dev = dev;
                                skb_reserve(skb, 2);    /* 16 byte align the IP header */
 #if ! defined(__alpha__)
-                               eth_copy_and_sum(skb, bus_to_virt(tp->rx_ring[entry].buffer1),
-                                                                pkt_len, 0);
+                               skb_copy_to_linear_data(skb, bus_to_virt(tp->rx_ring[entry].buffer1),
+                                                                pkt_len);
                                skb_put(skb, pkt_len);
 #else
                                memcpy(skb_put(skb, pkt_len),