Merge HEAD from ../scsi-iscsi-2.6

[linux-2.6-omap-h63xx.git] / drivers / scsi / Kconfig

diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 27fec8a5eb5bff4642c28160fb4d0ad6941dcd15..1c60c568e91167e5e1d964095f253ca1c59b3d59 100644 (file)
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1,5 +1,11 @@
 menu "SCSI device support"
 
+config RAID_ATTRS
+       tristate "RAID Transport Class"
+       default n
+       ---help---
+         Provides RAID
+
 config SCSI
        tristate "SCSI device support"
        ---help---
@@ -137,6 +143,24 @@ config CHR_DEV_SG
 
          If unsure, say N.
 
+config CHR_DEV_SCH
+       tristate "SCSI media changer support"
+       depends on SCSI
+       ---help---
+         This is a driver for SCSI media changers.  Most common devices are
+         tape libraries and MOD/CDROM jukeboxes.  *Real* jukeboxes, you
+         don't need this for those tiny 6-slot cdrom changers.  Media
+         changers are listed as "Type: Medium Changer" in /proc/scsi/scsi.
+         If you have such hardware and want to use it with linux, say Y
+         here.  Check <file:Documentation/scsi-changer.txt> for details.
+       
+         If you want to compile this as a module ( = code which can be
+         inserted in and removed from the running kernel whenever you want),
+         say M here and read <file:Documentation/modules.txt> and
+         <file:Documentation/scsi.txt>. The module will be called ch.o.
+         If unsure, say N.
+       
+
 comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs"
        depends on SCSI
 
@@ -205,12 +229,35 @@ config SCSI_FC_ATTRS
 
 config SCSI_ISCSI_ATTRS
        tristate "iSCSI Transport Attributes"
-       depends on SCSI
+       depends on SCSI && NET
        help
          If you wish to export transport-specific information about
          each attached iSCSI device to sysfs, say Y.
          Otherwise, say N.
 
+config ISCSI_TCP
+       tristate "iSCSI Initiator over TCP/IP"
+       depends on SCSI && INET && SCSI_ISCSI_ATTRS
+       select CRYPTO
+       select CRYPTO_MD5
+       select CRYPTO_CRC32C
+       help
+        The iSCSI Driver provides a host with the ability to access storage
+        through an IP network. The driver uses the iSCSI protocol to transport
+        SCSI requests and responses over a TCP/IP network between the host
+        (the "initiator") and "targets".  Architecturally, the iSCSI driver
+        combines with the host's TCP/IP stack, network drivers, and Network
+        Interface Card (NIC) to provide the same functions as a SCSI or a
+        Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA).
+
+        To compile this driver as a module, choose M here: the
+        module will be called iscsi_tcp.
+
+        The userspace component needed to initialize the driver, documentation,
+        and sample configuration files can be found here:
+
+        http://linux-iscsi.sf.net
+
 endmenu
 
 menu "SCSI low-level drivers"
@@ -232,7 +279,7 @@ config SCSI_DECNCR
 
 config SCSI_DECSII
        tristate "DEC SII Scsi Driver"
-       depends on MACH_DECSTATION && SCSI && MIPS32
+       depends on MACH_DECSTATION && SCSI && 32BIT
 
 config BLK_DEV_3W_XXXX_RAID
        tristate "3ware 5/6/7/8xxx ATA-RAID support"
@@ -406,7 +453,7 @@ config SCSI_IN2000
 source "drivers/scsi/megaraid/Kconfig.megaraid"
 
 config SCSI_SATA
-       bool "Serial ATA (SATA) support"
+       tristate "Serial ATA (SATA) support"
        depends on SCSI
        help
          This driver family supports Serial ATA host controllers
@@ -441,6 +488,15 @@ config SCSI_ATA_PIIX
 
          If unsure, say N.
 
+config SCSI_SATA_MV
+       tristate "Marvell SATA support"
+       depends on SCSI_SATA && PCI && EXPERIMENTAL
+       help
+         This option enables support for the Marvell Serial ATA family.
+         Currently supports 88SX[56]0[48][01] chips.
+
+         If unsure, say N.
+
 config SCSI_SATA_NV
        tristate "NVIDIA SATA support"
        depends on SCSI_SATA && PCI && EXPERIMENTAL
@@ -1192,28 +1248,6 @@ config SCSI_PAS16
          To compile this driver as a module, choose M here: the
          module will be called pas16.
 
-config SCSI_PCI2000
-       tristate "PCI2000 support"
-       depends on PCI && SCSI && BROKEN
-       help
-         This is support for the PCI2000I EIDE interface card which acts as a
-         SCSI host adapter.  Please read the SCSI-HOWTO, available from
-         <http://www.tldp.org/docs.html#howto>.
-
-         To compile this driver as a module, choose M here: the
-         module will be called pci2000.
-
-config SCSI_PCI2220I
-       tristate "PCI2220i support"
-       depends on PCI && SCSI && BROKEN
-       help
-         This is support for the PCI2220i EIDE interface card which acts as a
-         SCSI host adapter.  Please read the SCSI-HOWTO, available from
-         <http://www.tldp.org/docs.html#howto>.
-
-         To compile this driver as a module, choose M here: the
-         module will be called pci2220i.
-
 config SCSI_PSI240I
        tristate "PSI240i support"
        depends on ISA && SCSI
@@ -1700,7 +1734,7 @@ config TT_DMA_EMUL
 
 config MAC_SCSI
        bool "Macintosh NCR5380 SCSI"
-       depends on MAC && SCSI
+       depends on MAC && SCSI=y
        help
          This is the NCR 5380 SCSI controller included on most of the 68030
          based Macintoshes.  If you have one of these say Y and read the
@@ -1721,7 +1755,7 @@ config SCSI_MAC_ESP
 
 config MVME147_SCSI
        bool "WD33C93 SCSI driver for MVME147"
-       depends on MVME147 && SCSI
+       depends on MVME147 && SCSI=y
        help
          Support for the on-board SCSI controller on the Motorola MVME147
          single-board computer.
@@ -1762,7 +1796,7 @@ config SUN3_SCSI
 
 config SUN3X_ESP
        bool "Sun3x ESP SCSI"
-       depends on SUN3X && SCSI
+       depends on SUN3X && SCSI=y
        help
          The ESP was an on-board SCSI controller used on Sun 3/80
          machines.  Say Y here to compile in support for it.