If unsure, say N.
+config CHR_DEV_SCH
+ tristate "SCSI media changer support"
+ depends on SCSI
+ ---help---
+ This is a driver for SCSI media changers. Most common devices are
+ tape libraries and MOD/CDROM jukeboxes. *Real* jukeboxes, you
+ don't need this for those tiny 6-slot cdrom changers. Media
+ changers are listed as "Type: Medium Changer" in /proc/scsi/scsi.
+ If you have such hardware and want to use it with linux, say Y
+ here. Check <file:Documentation/scsi-changer.txt> for details.
+
+ If you want to compile this as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here and read <file:Documentation/modules.txt> and
+ <file:Documentation/scsi.txt>. The module will be called ch.o.
+ If unsure, say N.
+
+
comment "Some SCSI devices (e.g. CD jukebox) support multiple LUNs"
depends on SCSI
config SCSI_DECSII
tristate "DEC SII Scsi Driver"
- depends on MACH_DECSTATION && SCSI && MIPS32
+ depends on MACH_DECSTATION && SCSI && 32BIT
config BLK_DEV_3W_XXXX_RAID
tristate "3ware 5/6/7/8xxx ATA-RAID support"
config SCSI_7000FASST
tristate "7000FASST SCSI support"
- depends on ISA && SCSI
+ depends on ISA && SCSI && ISA_DMA_API
help
This driver supports the Western Digital 7000 SCSI host adapter
family. Some information is in the source:
config SCSI_AHA1542
tristate "Adaptec AHA1542 support"
- depends on ISA && SCSI
+ depends on ISA && SCSI && ISA_DMA_API
---help---
This is support for a SCSI host adapter. It is explained in section
3.4 of the SCSI-HOWTO, available from
source "drivers/scsi/megaraid/Kconfig.megaraid"
config SCSI_SATA
- bool "Serial ATA (SATA) support"
+ tristate "Serial ATA (SATA) support"
depends on SCSI
help
This driver family supports Serial ATA host controllers
config SCSI_BUSLOGIC
tristate "BusLogic SCSI support"
- depends on (PCI || ISA || MCA) && SCSI && (BROKEN || !SPARC64)
+ depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API
---help---
This is support for BusLogic MultiMaster and FlashPoint SCSI Host
Adapters. Consult the SCSI-HOWTO, available from
config SCSI_EATA
tristate "EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards) support"
- depends on (ISA || EISA || PCI) && SCSI && (BROKEN || !SPARC64)
+ depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
---help---
This driver supports all EATA/DMA-compliant SCSI host adapters. DPT
ISA and all EISA I/O addresses are probed looking for the "EATA"
config SCSI_GDTH
tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support"
- depends on (ISA || EISA || PCI) && SCSI && (BROKEN || !SPARC64)
+ depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API
---help---
Formerly called GDT SCSI Disk Array Controller Support.
Unless you have an NCR manufactured machine, the chances are that
you do not have this SCSI card, so say N.
-config 53C700_IO_MAPPED
- bool
- depends on SCSI_NCR_D700
- default y
-
config SCSI_LASI700
tristate "HP Lasi SCSI support for 53c700/710"
depends on GSC && SCSI
many PA-RISC workstations & servers. If you do not know whether you
have a Lasi chip, it is safe to say "Y" here.
-config 53C700_MEM_MAPPED
- bool
- depends on SCSI_LASI700
- default y
-
config 53C700_LE_ON_BE
bool
depends on SCSI_LASI700
To compile this driver as a module, choose M here: the
module will be called pas16.
-config SCSI_PCI2000
- tristate "PCI2000 support"
- depends on PCI && SCSI && BROKEN
- help
- This is support for the PCI2000I EIDE interface card which acts as a
- SCSI host adapter. Please read the SCSI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here: the
- module will be called pci2000.
-
-config SCSI_PCI2220I
- tristate "PCI2220i support"
- depends on PCI && SCSI && BROKEN
- help
- This is support for the PCI2220i EIDE interface card which acts as a
- SCSI host adapter. Please read the SCSI-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here: the
- module will be called pci2220i.
-
config SCSI_PSI240I
tristate "PSI240i support"
depends on ISA && SCSI
source "drivers/scsi/qla2xxx/Kconfig"
+config SCSI_LPFC
+ tristate "Emulex LightPulse Fibre Channel Support"
+ depends on PCI && SCSI
+ select SCSI_FC_ATTRS
+ help
+ This lpfc driver supports the Emulex LightPulse
+ Family of Fibre Channel PCI host adapters.
+
config SCSI_SEAGATE
tristate "Seagate ST-02 and Future Domain TMC-8xx SCSI support"
depends on X86 && ISA && SCSI && BROKEN
config SCSI_U14_34F
tristate "UltraStor 14F/34F support"
- depends on ISA && SCSI
+ depends on ISA && SCSI && ISA_DMA_API
---help---
This is support for the UltraStor 14F and 34F SCSI-2 host adapters.
The source at <file:drivers/scsi/u14-34f.c> contains some
config MAC_SCSI
bool "Macintosh NCR5380 SCSI"
- depends on MAC && SCSI
+ depends on MAC && SCSI=y
help
This is the NCR 5380 SCSI controller included on most of the 68030
based Macintoshes. If you have one of these say Y and read the
config MVME147_SCSI
bool "WD33C93 SCSI driver for MVME147"
- depends on MVME147 && SCSI
+ depends on MVME147 && SCSI=y
help
Support for the on-board SCSI controller on the Motorola MVME147
single-board computer.
config SUN3_SCSI
tristate "Sun3 NCR5380 SCSI"
- depends on SUN3 && SCSI
+ depends on SUN3 && SCSI && BROKEN
help
This option will enable support for the OBIO (onboard io) NCR5380
SCSI controller found in the Sun 3/50 and 3/60, as well as for
config SUN3X_ESP
bool "Sun3x ESP SCSI"
- depends on SUN3X && SCSI
+ depends on SUN3X && SCSI=y
help
The ESP was an on-board SCSI controller used on Sun 3/80
machines. Say Y here to compile in support for it.
projects / linux-2.6-omap-h63xx.git / blobdiff