[SCSI] megaraid_sas: convert to use the data buffer accessors

[linux-2.6-omap-h63xx.git] / drivers / scsi / Makefile

diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index 79ecf4ebe6ebea59b3b662f88ae6fae2d15a526c..cba39679f947943b5cb88acada80a9135c0110b6 100644 (file)
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -37,7 +37,6 @@ obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas/
 
 obj-$(CONFIG_ISCSI_TCP)        += libiscsi.o   iscsi_tcp.o
 obj-$(CONFIG_INFINIBAND_ISER)  += libiscsi.o
-obj-$(CONFIG_SCSI_AMIGA7XX)    += amiga7xx.o   53c7xx.o
 obj-$(CONFIG_A3000_SCSI)       += a3000.o      wd33c93.o
 obj-$(CONFIG_A2091_SCSI)       += a2091.o      wd33c93.o
 obj-$(CONFIG_GVP11_SCSI)       += gvp11.o      wd33c93.o
@@ -53,8 +52,6 @@ obj-$(CONFIG_ATARI_SCSI)      += atari_scsi.o
 obj-$(CONFIG_MAC_SCSI)         += mac_scsi.o
 obj-$(CONFIG_SCSI_MAC_ESP)     += mac_esp.o    NCR53C9x.o
 obj-$(CONFIG_SUN3_SCSI)                += sun3_scsi.o  sun3_scsi_vme.o
-obj-$(CONFIG_MVME16x_SCSI)     += mvme16x.o    53c7xx.o
-obj-$(CONFIG_BVME6000_SCSI)    += bvme6000.o   53c7xx.o
 obj-$(CONFIG_SCSI_SIM710)      += 53c700.o     sim710.o
 obj-$(CONFIG_SCSI_ADVANSYS)    += advansys.o
 obj-$(CONFIG_SCSI_PSI240I)     += psi240i.o
@@ -106,7 +103,7 @@ obj-$(CONFIG_MEGARAID_LEGACY)       += megaraid.o
 obj-$(CONFIG_MEGARAID_NEWGEN)  += megaraid/
 obj-$(CONFIG_MEGARAID_SAS)     += megaraid/
 obj-$(CONFIG_SCSI_ACARD)       += atp870u.o
-obj-$(CONFIG_SCSI_SUNESP)      += esp.o
+obj-$(CONFIG_SCSI_SUNESP)      += esp_scsi.o   sun_esp.o
 obj-$(CONFIG_SCSI_GDTH)                += gdth.o
 obj-$(CONFIG_SCSI_INITIO)      += initio.o
 obj-$(CONFIG_SCSI_INIA100)     += a100u2w.o
@@ -120,7 +117,7 @@ obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o
 obj-$(CONFIG_SCSI_3W_9XXX)     += 3w-9xxx.o
 obj-$(CONFIG_SCSI_PPA)         += ppa.o
 obj-$(CONFIG_SCSI_IMM)         += imm.o
-obj-$(CONFIG_JAZZ_ESP)         += NCR53C9x.o   jazz_esp.o
+obj-$(CONFIG_JAZZ_ESP)         += esp_scsi.o   jazz_esp.o
 obj-$(CONFIG_SUN3X_ESP)                += NCR53C9x.o   sun3x_esp.o
 obj-$(CONFIG_SCSI_FCAL)                += fcal.o
 obj-$(CONFIG_SCSI_LASI700)     += 53c700.o lasi700.o
@@ -145,7 +142,7 @@ obj-$(CONFIG_CHR_DEV_SCH)   += ch.o
 # This goes last, so that "real" scsi devices probe earlier
 obj-$(CONFIG_SCSI_DEBUG)       += scsi_debug.o
 
-obj-$(CONFIG_SCSI)             += scsi_wait_scan.o
+obj-$(CONFIG_SCSI_WAIT_SCAN)   += scsi_wait_scan.o
 
 scsi_mod-y                     += scsi.o hosts.o scsi_ioctl.o constants.o \
                                   scsicam.o scsi_error.o scsi_lib.o \
@@ -168,10 +165,8 @@ NCR_Q720_mod-objs  := NCR_Q720.o ncr53c8xx.o
 oktagon_esp_mod-objs   := oktagon_esp.o oktagon_io.o
 
 # Files generated that shall be removed upon make clean
-clean-files := 53c7xx_d.h 53c700_d.h   \
-               53c7xx_u.h 53c700_u.h
+clean-files := 53c700_d.h 53c700_u.h
 
-$(obj)/53c7xx.o:   $(obj)/53c7xx_d.h $(obj)/53c7xx_u.h
 $(obj)/53c700.o $(MODVERDIR)/$(obj)/53c700.ver: $(obj)/53c700_d.h
 
 # If you want to play with the firmware, uncomment
@@ -179,11 +174,6 @@ $(obj)/53c700.o $(MODVERDIR)/$(obj)/53c700.ver: $(obj)/53c700_d.h
 
 ifdef GENERATE_FIRMWARE
 
-$(obj)/53c7xx_d.h: $(src)/53c7xx.scr $(src)/script_asm.pl
-       $(CPP) -traditional -DCHIP=710 - < $< | grep -v '^#' | $(PERL) -s $(src)/script_asm.pl -ncr7x0_family $@ $(@:_d.h=_u.h)
-
-$(obj)/53c7xx_u.h: $(obj)/53c7xx_d.h
-
 $(obj)/53c700_d.h: $(src)/53c700.scr $(src)/script_asm.pl
        $(PERL) -s $(src)/script_asm.pl -ncr7x0_family $@ $(@:_d.h=_u.h) < $<