#include <scsi/scsi_eh.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_sas.h>
+#include <scsi/sas_ata.h>
#include "../scsi_sas_internal.h"
#include "../scsi_transport_api.h"
#include "../scsi_priv.h"
/* ---------- SCSI Host glue ---------- */
-#define TO_SAS_TASK(_scsi_cmd) ((void *)(_scsi_cmd)->host_scribble)
-#define ASSIGN_SAS_TASK(_sc, _t) do { (_sc)->host_scribble = (void *) _t; } while (0)
-
static void sas_scsi_task_done(struct sas_task *task)
{
struct task_status_struct *ts = &task->task_status;
break;
case SAM_CHECK_COND:
memcpy(sc->sense_buffer, ts->buf,
- max(SCSI_SENSE_BUFFERSIZE, ts->buf_valid_size));
+ min(SCSI_SENSE_BUFFERSIZE, ts->buf_valid_size));
stat = SAM_CHECK_COND;
break;
default:
if (!task)
return NULL;
- *(u32 *)cmd->sense_buffer = 0;
task->uldd_task = cmd;
ASSIGN_SAS_TASK(cmd, task);
return task;
}
-static int sas_queue_up(struct sas_task *task)
+int sas_queue_up(struct sas_task *task)
{
struct sas_ha_struct *sas_ha = task->dev->port->ha;
struct scsi_core *core = &sas_ha->core;
return 0;
}
-static inline int dev_is_sata(struct domain_device *dev)
-{
- return (dev->rphy->identify.target_port_protocols & SAS_PROTOCOL_SATA);
-}
-
/**
* sas_queuecommand -- Enqueue a command for processing
* @parameters: See SCSI Core documentation
*/
int sas_queuecommand(struct scsi_cmnd *cmd,
void (*scsi_done)(struct scsi_cmnd *))
+ __releases(host->host_lock)
+ __acquires(dev->sata_dev.ap->lock)
+ __releases(dev->sata_dev.ap->lock)
+ __acquires(host->host_lock)
{
int res = 0;
struct domain_device *dev = cmd_to_domain_dev(cmd);
struct sas_task *task;
if (dev_is_sata(dev)) {
+ unsigned long flags;
+
+ spin_lock_irqsave(dev->sata_dev.ap->lock, flags);
res = ata_sas_queuecmd(cmd, scsi_done,
dev->sata_dev.ap);
+ spin_unlock_irqrestore(dev->sata_dev.ap->lock, flags);
goto out;
}
}
/* Find the sas_phy that's attached to this device */
-struct sas_phy *find_local_sas_phy(struct domain_device *dev)
+static struct sas_phy *find_local_sas_phy(struct domain_device *dev)
{
struct domain_device *pdev = dev->parent;
struct ex_phy *exphy = NULL;
res = sas_phy_reset(phy, 1);
if (res)
SAS_DPRINTK("Bus reset of %s failed 0x%x\n",
- phy->dev.kobj.k_name,
+ kobject_name(&phy->dev.kobj),
res);
if (res == TMF_RESP_FUNC_SUCC || res == TMF_RESP_FUNC_COMPLETE)
return SUCCESS;
return EH_NOT_HANDLED;
}
-
-static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts)
-{
- /* Cheesy attempt to translate SAS errors into ATA. Hah! */
-
- /* transport error */
- if (ts->resp == SAS_TASK_UNDELIVERED)
- return AC_ERR_ATA_BUS;
-
- /* ts->resp == SAS_TASK_COMPLETE */
- /* task delivered, what happened afterwards? */
- switch (ts->stat) {
- case SAS_DEV_NO_RESPONSE:
- return AC_ERR_TIMEOUT;
-
- case SAS_INTERRUPTED:
- case SAS_PHY_DOWN:
- case SAS_NAK_R_ERR:
- return AC_ERR_ATA_BUS;
-
-
- case SAS_DATA_UNDERRUN:
- /*
- * Some programs that use the taskfile interface
- * (smartctl in particular) can cause underrun
- * problems. Ignore these errors, perhaps at our
- * peril.
- */
- return 0;
-
- case SAS_DATA_OVERRUN:
- case SAS_QUEUE_FULL:
- case SAS_DEVICE_UNKNOWN:
- case SAS_SG_ERR:
- return AC_ERR_INVALID;
-
- case SAM_CHECK_COND:
- case SAS_OPEN_TO:
- case SAS_OPEN_REJECT:
- case SAS_PROTO_RESPONSE:
- SAS_DPRINTK("%s: Saw error %d. What to do?\n",
- __FUNCTION__, ts->stat);
- return AC_ERR_OTHER;
-
- case SAS_ABORTED_TASK:
- return AC_ERR_DEV;
-
- default:
- return 0;
- }
-}
-
-static void sas_ata_task_done(struct sas_task *task)
-{
- struct ata_queued_cmd *qc = task->uldd_task;
- struct domain_device *dev = qc->ap->private_data;
- struct task_status_struct *stat = &task->task_status;
- struct ata_task_resp *resp = (struct ata_task_resp *)stat->buf;
- enum ata_completion_errors ac;
-
- ac = sas_to_ata_err(stat);
- if (ac) {
- SAS_DPRINTK("%s: SAS error %x\n", __FUNCTION__, stat->stat);
- /* We saw a SAS error. Send a vague error. */
- qc->err_mask = ac;
- dev->sata_dev.tf.feature = 0x04; /* status err */
- dev->sata_dev.tf.command = ATA_ERR;
- goto end;
- }
-
- ata_tf_from_fis(resp->ending_fis, &dev->sata_dev.tf);
- qc->err_mask |= ac_err_mask(dev->sata_dev.tf.command);
- dev->sata_dev.sstatus = resp->sstatus;
- dev->sata_dev.serror = resp->serror;
- dev->sata_dev.scontrol = resp->scontrol;
- dev->sata_dev.ap->sactive = resp->sactive;
-end:
- ata_qc_complete(qc);
- list_del_init(&task->list);
- sas_free_task(task);
-}
-
int sas_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
{
struct domain_device *dev = sdev_to_domain_dev(sdev);
return -EINVAL;
}
-static unsigned int sas_ata_qc_issue(struct ata_queued_cmd *qc)
-{
- int res = -ENOMEM;
- struct sas_task *task;
- struct domain_device *dev = qc->ap->private_data;
- struct sas_ha_struct *sas_ha = dev->port->ha;
- struct Scsi_Host *host = sas_ha->core.shost;
- struct sas_internal *i = to_sas_internal(host->transportt);
- struct scatterlist *sg;
- unsigned int num = 0;
- unsigned int xfer = 0;
-
- task = sas_alloc_task(GFP_ATOMIC);
- if (!task)
- goto out;
- task->dev = dev;
- task->task_proto = SAS_PROTOCOL_STP;
- task->task_done = sas_ata_task_done;
-
- ata_tf_to_fis(&qc->tf, (u8*)&task->ata_task.fis, 0);
- task->uldd_task = qc;
- if (is_atapi_taskfile(&qc->tf)) {
- memcpy(task->ata_task.atapi_packet, qc->cdb, ATAPI_CDB_LEN);
- task->total_xfer_len = qc->nbytes + qc->pad_len;
- task->num_scatter = qc->pad_len ? qc->n_elem + 1 : qc->n_elem;
- } else {
- ata_for_each_sg(sg, qc) {
- num++;
- xfer += sg->length;
- }
-
- task->total_xfer_len = xfer;
- task->num_scatter = num;
- }
-
- task->data_dir = qc->dma_dir;
- task->scatter = qc->__sg;
- task->ata_task.retry_count = 1;
- task->task_state_flags = SAS_TASK_STATE_PENDING;
-
- switch (qc->tf.protocol) {
- case ATA_PROT_NCQ:
- task->ata_task.use_ncq = 1;
- /* fall through */
- case ATA_PROT_DMA:
- task->ata_task.dma_xfer = 1;
- break;
- }
-
- if (sas_ha->lldd_max_execute_num < 2)
- res = i->dft->lldd_execute_task(task, 1, GFP_ATOMIC);
- else
- res = sas_queue_up(task);
-
- /* Examine */
- if (res) {
- SAS_DPRINTK("lldd_execute_task returned: %d\n", res);
-
- sas_free_task(task);
- if (res == -SAS_QUEUE_FULL)
- return -ENOMEM;
- }
-
-out:
- return res;
-}
-
-static u8 sas_ata_check_status(struct ata_port *ap)
-{
- struct domain_device *dev = ap->private_data;
- return dev->sata_dev.tf.command;
-}
-
-static void sas_ata_phy_reset(struct ata_port *ap)
-{
- struct domain_device *dev = ap->private_data;
- struct sas_internal *i =
- to_sas_internal(dev->port->ha->core.shost->transportt);
- int res = 0;
-
- if (i->dft->lldd_I_T_nexus_reset)
- res = i->dft->lldd_I_T_nexus_reset(dev);
-
- if (res)
- SAS_DPRINTK("%s: Unable to reset I T nexus?\n", __FUNCTION__);
-
- switch (dev->sata_dev.command_set) {
- case ATA_COMMAND_SET:
- SAS_DPRINTK("%s: Found ATA device.\n", __FUNCTION__);
- ap->device[0].class = ATA_DEV_ATA;
- break;
- case ATAPI_COMMAND_SET:
- SAS_DPRINTK("%s: Found ATAPI device.\n", __FUNCTION__);
- ap->device[0].class = ATA_DEV_ATAPI;
- break;
- default:
- SAS_DPRINTK("%s: Unknown SATA command set: %d.\n",
- __FUNCTION__,
- dev->sata_dev.command_set);
- ap->device[0].class = ATA_DEV_ATA;
- break;
- }
-
- ap->cbl = ATA_CBL_SATA;
-}
-
-static void sas_ata_post_internal(struct ata_queued_cmd *qc)
-{
- if (qc->flags & ATA_QCFLAG_FAILED)
- qc->err_mask |= AC_ERR_OTHER;
-
- if (qc->err_mask)
- SAS_DPRINTK("%s: Failure; reset phy!\n", __FUNCTION__);
-}
-
-static void sas_ata_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
-{
- struct domain_device *dev = ap->private_data;
- memcpy(tf, &dev->sata_dev.tf, sizeof (*tf));
-}
-
-static void sas_ata_scr_write(struct ata_port *ap, unsigned int sc_reg_in,
- u32 val)
-{
- struct domain_device *dev = ap->private_data;
-
- SAS_DPRINTK("STUB %s\n", __FUNCTION__);
- switch (sc_reg_in) {
- case SCR_STATUS:
- dev->sata_dev.sstatus = val;
- break;
- case SCR_CONTROL:
- dev->sata_dev.scontrol = val;
- break;
- case SCR_ERROR:
- dev->sata_dev.serror = val;
- break;
- case SCR_ACTIVE:
- dev->sata_dev.ap->sactive = val;
- break;
- }
-}
-
-static u32 sas_ata_scr_read(struct ata_port *ap, unsigned int sc_reg_in)
-{
- struct domain_device *dev = ap->private_data;
-
- SAS_DPRINTK("STUB %s\n", __FUNCTION__);
- switch (sc_reg_in) {
- case SCR_STATUS:
- return dev->sata_dev.sstatus;
- case SCR_CONTROL:
- return dev->sata_dev.scontrol;
- case SCR_ERROR:
- return dev->sata_dev.serror;
- case SCR_ACTIVE:
- return dev->sata_dev.ap->sactive;
- default:
- return 0xffffffffU;
- }
-}
-
-static struct ata_port_operations sas_sata_ops = {
- .port_disable = ata_port_disable,
- .check_status = sas_ata_check_status,
- .check_altstatus = sas_ata_check_status,
- .dev_select = ata_noop_dev_select,
- .phy_reset = sas_ata_phy_reset,
- .post_internal_cmd = sas_ata_post_internal,
- .tf_read = sas_ata_tf_read,
- .qc_prep = ata_noop_qc_prep,
- .qc_issue = sas_ata_qc_issue,
- .port_start = ata_sas_port_start,
- .port_stop = ata_sas_port_stop,
- .scr_read = sas_ata_scr_read,
- .scr_write = sas_ata_scr_write
-};
-
-static struct ata_port_info sata_port_info = {
- .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET |
- ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | ATA_FLAG_NCQ,
- .pio_mask = 0x1f, /* PIO0-4 */
- .mwdma_mask = 0x07, /* MWDMA0-2 */
- .udma_mask = ATA_UDMA6,
- .port_ops = &sas_sata_ops
-};
-
struct domain_device *sas_find_dev_by_rphy(struct sas_rphy *rphy)
{
struct Scsi_Host *shost = dev_to_shost(rphy->dev.parent);
int sas_target_alloc(struct scsi_target *starget)
{
- struct Scsi_Host *shost = dev_to_shost(&starget->dev);
- struct sas_ha_struct *ha = SHOST_TO_SAS_HA(shost);
struct domain_device *found_dev = sas_find_target(starget);
+ int res;
if (!found_dev)
return -ENODEV;
if (dev_is_sata(found_dev)) {
- struct ata_port *ap;
-
- ata_host_init(&found_dev->sata_dev.ata_host,
- &ha->pcidev->dev,
- sata_port_info.flags,
- &sas_sata_ops);
- ap = ata_sas_port_alloc(&found_dev->sata_dev.ata_host,
- &sata_port_info,
- shost);
- if (!ap) {
- SAS_DPRINTK("ata_sas_port_alloc failed.\n");
- return -ENODEV;
- }
-
- ap->private_data = found_dev;
- ap->cbl = ATA_CBL_SATA;
- ap->scsi_host = shost;
- found_dev->sata_dev.ap = ap;
+ res = sas_ata_init_host_and_port(found_dev, starget);
+ if (res)
+ return res;
}
starget->hostdata = found_dev;
return;
}
+ if (dev_is_sata(task->dev)) {
+ sas_ata_task_abort(task);
+ return;
+ }
+
scsi_req_abort_cmd(sc);
scsi_schedule_eh(sc->device->host);
}
projects / linux-2.6-omap-h63xx.git / blobdiff