/* qlogicpti.c: Performance Technologies QlogicISP sbus card driver.
*
- * Copyright (C) 1996 David S. Miller (davem@caipfs.rutgers.edu)
+ * Copyright (C) 1996, 2006 David S. Miller (davem@davemloft.net)
*
* A lot of this driver was directly stolen from Erik H. Moe's PCI
* Qlogic ISP driver. Mucho kudos to him for this code.
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_eh.h>
-#include <scsi/scsi_request.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_host.h>
-
-
#define MAX_TARGETS 16
#define MAX_LUNS 8 /* 32 for 1.31 F/W */
static struct qlogicpti *qptichain = NULL;
static DEFINE_SPINLOCK(qptichain_lock);
-static int qptis_running = 0;
#define PACKB(a, b) (((a)<<4)|(b))
SA_SHIRQ, "Qlogic/PTI", qpti))
goto fail;
- printk("qpti%d: IRQ %s ", qpti->qpti_id, __irq_itoa(qpti->irq));
+ printk("qpti%d: IRQ %d ", qpti->qpti_id, qpti->irq);
return 0;
return 0;
}
-/* Detect all PTI Qlogic ISP's in the machine. */
-static int __init qlogicpti_detect(struct scsi_host_template *tpnt)
-{
- struct qlogicpti *qpti;
- struct Scsi_Host *qpti_host;
- struct sbus_bus *sbus;
- struct sbus_dev *sdev;
- int nqptis = 0, nqptis_in_use = 0;
-
- tpnt->proc_name = "qlogicpti";
- for_each_sbus(sbus) {
- for_each_sbusdev(sdev, sbus) {
- /* Is this a red snapper? */
- if (strcmp(sdev->prom_name, "ptisp") &&
- strcmp(sdev->prom_name, "PTI,ptisp") &&
- strcmp(sdev->prom_name, "QLGC,isp") &&
- strcmp(sdev->prom_name, "SUNW,isp"))
- continue;
-
- /* Sometimes Antares cards come up not completely
- * setup, and we get a report of a zero IRQ.
- * Skip over them in such cases so we survive.
- */
- if (sdev->irqs[0] == 0) {
- printk("qpti%d: Adapter reports no interrupt, "
- "skipping over this card.", nqptis);
- continue;
- }
-
- /* Yep, register and allocate software state. */
- qpti_host = scsi_register(tpnt, sizeof(struct qlogicpti));
- if (!qpti_host) {
- printk("QPTI: Cannot register PTI Qlogic ISP SCSI host");
- continue;
- }
- qpti = (struct qlogicpti *) qpti_host->hostdata;
-
- /* We are wide capable, 16 targets. */
- qpti_host->max_id = MAX_TARGETS;
-
- /* Setup back pointers and misc. state. */
- qpti->qhost = qpti_host;
- qpti->sdev = sdev;
- qpti->qpti_id = nqptis++;
- qpti->prom_node = sdev->prom_node;
- prom_getstring(qpti->prom_node, "name",
- qpti->prom_name,
- sizeof(qpti->prom_name));
-
- /* This is not correct, actually. There's a switch
- * on the PTI cards that put them into "emulation"
- * mode- i.e., report themselves as QLGC,isp
- * instead of PTI,ptisp. The only real substantive
- * difference between non-pti and pti cards is
- * the tmon register. Which is possibly even
- * there for Qlogic cards, but non-functional.
- */
- qpti->is_pti = (strcmp (qpti->prom_name, "QLGC,isp") != 0);
-
- qpti_chain_add(qpti);
- if (qpti_map_regs(qpti) < 0)
- goto fail_unlink;
-
- if (qpti_register_irq(qpti) < 0)
- goto fail_unmap_regs;
-
- qpti_get_scsi_id(qpti);
- qpti_get_bursts(qpti);
- qpti_get_clock(qpti);
-
- /* Clear out scsi_cmnd array. */
- memset(qpti->cmd_slots, 0, sizeof(qpti->cmd_slots));
-
- if (qpti_map_queues(qpti) < 0)
- goto fail_free_irq;
-
- /* Load the firmware. */
- if (qlogicpti_load_firmware(qpti))
- goto fail_unmap_queues;
- if (qpti->is_pti) {
- /* Check the PTI status reg. */
- if (qlogicpti_verify_tmon(qpti))
- goto fail_unmap_queues;
- }
-
- /* Reset the ISP and init res/req queues. */
- if (qlogicpti_reset_hardware(qpti_host))
- goto fail_unmap_queues;
-
- printk("(Firmware v%d.%d.%d)", qpti->fware_majrev,
- qpti->fware_minrev, qpti->fware_micrev);
- {
- char buffer[60];
-
- prom_getstring (qpti->prom_node,
- "isp-fcode", buffer, 60);
- if (buffer[0])
- printk("(Firmware %s)", buffer);
- if (prom_getbool(qpti->prom_node, "differential"))
- qpti->differential = 1;
- }
-
- printk (" [%s Wide, using %s interface]\n",
- (qpti->ultra ? "Ultra" : "Fast"),
- (qpti->differential ? "differential" : "single ended"));
-
- nqptis_in_use++;
- continue;
-
- fail_unmap_queues:
-#define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN)
- sbus_free_consistent(qpti->sdev,
- QSIZE(RES_QUEUE_LEN),
- qpti->res_cpu, qpti->res_dvma);
- sbus_free_consistent(qpti->sdev,
- QSIZE(QLOGICPTI_REQ_QUEUE_LEN),
- qpti->req_cpu, qpti->req_dvma);
-#undef QSIZE
- fail_free_irq:
- free_irq(qpti->irq, qpti);
-
- fail_unmap_regs:
- sbus_iounmap(qpti->qregs,
- qpti->sdev->reg_addrs[0].reg_size);
- if (qpti->is_pti)
- sbus_iounmap(qpti->sreg, sizeof(unsigned char));
- fail_unlink:
- qpti_chain_del(qpti);
- scsi_unregister(qpti->qhost);
- }
- }
- if (nqptis)
- printk("QPTI: Total of %d PTI Qlogic/ISP hosts found, %d actually in use.\n",
- nqptis, nqptis_in_use);
- qptis_running = nqptis_in_use;
- return nqptis;
-}
-
-static int qlogicpti_release(struct Scsi_Host *host)
-{
- struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
-
- /* Remove visibility from IRQ handlers. */
- qpti_chain_del(qpti);
-
- /* Shut up the card. */
- sbus_writew(0, qpti->qregs + SBUS_CTRL);
-
- /* Free IRQ handler and unmap Qlogic,ISP and PTI status regs. */
- free_irq(qpti->irq, qpti);
-
-#define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN)
- sbus_free_consistent(qpti->sdev,
- QSIZE(RES_QUEUE_LEN),
- qpti->res_cpu, qpti->res_dvma);
- sbus_free_consistent(qpti->sdev,
- QSIZE(QLOGICPTI_REQ_QUEUE_LEN),
- qpti->req_cpu, qpti->req_dvma);
-#undef QSIZE
-
- sbus_iounmap(qpti->qregs, qpti->sdev->reg_addrs[0].reg_size);
- if (qpti->is_pti)
- sbus_iounmap(qpti->sreg, sizeof(unsigned char));
-
- return 0;
-}
-
const char *qlogicpti_info(struct Scsi_Host *host)
{
static char buf[80];
struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
- sprintf(buf, "PTI Qlogic,ISP SBUS SCSI irq %s regs at %p",
- __irq_itoa(qpti->qhost->irq), qpti->qregs);
+ sprintf(buf, "PTI Qlogic,ISP SBUS SCSI irq %d regs at %p",
+ qpti->qhost->irq, qpti->qregs);
return buf;
}
return return_status;
}
-static struct scsi_host_template driver_template = {
- .detect = qlogicpti_detect,
- .release = qlogicpti_release,
+static struct scsi_host_template qpti_template = {
+ .module = THIS_MODULE,
+ .name = "qlogicpti",
.info = qlogicpti_info,
.queuecommand = qlogicpti_queuecommand_slow,
.eh_abort_handler = qlogicpti_abort,
.use_clustering = ENABLE_CLUSTERING,
};
+static int __devinit qpti_sbus_probe(struct of_device *dev, const struct of_device_id *match)
+{
+ static int nqptis;
+ struct sbus_dev *sdev = to_sbus_device(&dev->dev);
+ struct device_node *dp = dev->node;
+ struct scsi_host_template *tpnt = match->data;
+ struct Scsi_Host *host;
+ struct qlogicpti *qpti;
+ char *fcode;
+
+ /* Sometimes Antares cards come up not completely
+ * setup, and we get a report of a zero IRQ.
+ */
+ if (sdev->irqs[0] == 0)
+ return -ENODEV;
+
+ host = scsi_host_alloc(tpnt, sizeof(struct qlogicpti));
+ if (!host)
+ return -ENOMEM;
+
+ qpti = (struct qlogicpti *) host->hostdata;
+
+ host->max_id = MAX_TARGETS;
+ qpti->qhost = host;
+ qpti->sdev = sdev;
+ qpti->qpti_id = nqptis;
+ qpti->prom_node = sdev->prom_node;
+ strcpy(qpti->prom_name, sdev->ofdev.node->name);
+ qpti->is_pti = strcmp(qpti->prom_name, "QLGC,isp");
+
+ if (qpti_map_regs(qpti) < 0)
+ goto fail_unlink;
+
+ if (qpti_register_irq(qpti) < 0)
+ goto fail_unmap_regs;
+
+ qpti_get_scsi_id(qpti);
+ qpti_get_bursts(qpti);
+ qpti_get_clock(qpti);
+
+ /* Clear out scsi_cmnd array. */
+ memset(qpti->cmd_slots, 0, sizeof(qpti->cmd_slots));
+
+ if (qpti_map_queues(qpti) < 0)
+ goto fail_free_irq;
+
+ /* Load the firmware. */
+ if (qlogicpti_load_firmware(qpti))
+ goto fail_unmap_queues;
+ if (qpti->is_pti) {
+ /* Check the PTI status reg. */
+ if (qlogicpti_verify_tmon(qpti))
+ goto fail_unmap_queues;
+ }
+
+ /* Reset the ISP and init res/req queues. */
+ if (qlogicpti_reset_hardware(host))
+ goto fail_unmap_queues;
+
+ if (scsi_add_host(host, &dev->dev))
+ goto fail_unmap_queues;
+
+ printk("(Firmware v%d.%d.%d)", qpti->fware_majrev,
+ qpti->fware_minrev, qpti->fware_micrev);
+
+ fcode = of_get_property(dp, "isp-fcode", NULL);
+ if (fcode && fcode[0])
+ printk("(Firmware %s)", fcode);
+ if (of_find_property(dp, "differential", NULL) != NULL)
+ qpti->differential = 1;
+
+ printk (" [%s Wide, using %s interface]\n",
+ (qpti->ultra ? "Ultra" : "Fast"),
+ (qpti->differential ? "differential" : "single ended"));
+
+ dev_set_drvdata(&sdev->ofdev.dev, qpti);
+
+ qpti_chain_add(qpti);
+
+ scsi_scan_host(host);
+ nqptis++;
+
+ return 0;
+
+fail_unmap_queues:
+#define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN)
+ sbus_free_consistent(qpti->sdev,
+ QSIZE(RES_QUEUE_LEN),
+ qpti->res_cpu, qpti->res_dvma);
+ sbus_free_consistent(qpti->sdev,
+ QSIZE(QLOGICPTI_REQ_QUEUE_LEN),
+ qpti->req_cpu, qpti->req_dvma);
+#undef QSIZE
+
+fail_unmap_regs:
+ sbus_iounmap(qpti->qregs,
+ qpti->sdev->reg_addrs[0].reg_size);
+ if (qpti->is_pti)
+ sbus_iounmap(qpti->sreg, sizeof(unsigned char));
+
+fail_free_irq:
+ free_irq(qpti->irq, qpti);
+
+fail_unlink:
+ scsi_host_put(host);
+
+ return -ENODEV;
+}
+
+static int __devexit qpti_sbus_remove(struct of_device *dev)
+{
+ struct qlogicpti *qpti = dev_get_drvdata(&dev->dev);
+
+ qpti_chain_del(qpti);
+
+ scsi_remove_host(qpti->qhost);
+
+ /* Shut up the card. */
+ sbus_writew(0, qpti->qregs + SBUS_CTRL);
+
+ /* Free IRQ handler and unmap Qlogic,ISP and PTI status regs. */
+ free_irq(qpti->irq, qpti);
+
+#define QSIZE(entries) (((entries) + 1) * QUEUE_ENTRY_LEN)
+ sbus_free_consistent(qpti->sdev,
+ QSIZE(RES_QUEUE_LEN),
+ qpti->res_cpu, qpti->res_dvma);
+ sbus_free_consistent(qpti->sdev,
+ QSIZE(QLOGICPTI_REQ_QUEUE_LEN),
+ qpti->req_cpu, qpti->req_dvma);
+#undef QSIZE
+
+ sbus_iounmap(qpti->qregs, qpti->sdev->reg_addrs[0].reg_size);
+ if (qpti->is_pti)
+ sbus_iounmap(qpti->sreg, sizeof(unsigned char));
+
+ scsi_host_put(qpti->qhost);
+
+ return 0;
+}
+
+static struct of_device_id qpti_match[] = {
+ {
+ .name = "ptisp",
+ .data = &qpti_template,
+ },
+ {
+ .name = "PTI,ptisp",
+ .data = &qpti_template,
+ },
+ {
+ .name = "QLGC,isp",
+ .data = &qpti_template,
+ },
+ {
+ .name = "SUNW,isp",
+ .data = &qpti_template,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, qpti_match);
+
+static struct of_platform_driver qpti_sbus_driver = {
+ .name = "qpti",
+ .match_table = qpti_match,
+ .probe = qpti_sbus_probe,
+ .remove = __devexit_p(qpti_sbus_remove),
+};
-#include "scsi_module.c"
+static int __init qpti_init(void)
+{
+ return of_register_driver(&qpti_sbus_driver, &sbus_bus_type);
+}
+
+static void __exit qpti_exit(void)
+{
+ of_unregister_driver(&qpti_sbus_driver);
+}
+MODULE_DESCRIPTION("QlogicISP SBUS driver");
+MODULE_AUTHOR("David S. Miller (davem@davemloft.net)");
MODULE_LICENSE("GPL");
+MODULE_VERSION("2.0");
+module_init(qpti_init);
+module_exit(qpti_exit);