return ret;
}
-/**
- * scsi_add_timer - Start timeout timer for a single scsi command.
- * @scmd: scsi command that is about to start running.
- * @timeout: amount of time to allow this command to run.
- * @complete: timeout function to call if timer isn't canceled.
- *
- * Notes:
- * This should be turned into an inline function. Each scsi command
- * has its own timer, and as it is added to the queue, we set up the
- * timer. When the command completes, we cancel the timer.
- */
-void scsi_add_timer(struct scsi_cmnd *scmd, int timeout,
- void (*complete)(struct scsi_cmnd *))
-{
-
- /*
- * If the clock was already running for this command, then
- * first delete the timer. The timer handling code gets rather
- * confused if we don't do this.
- */
- if (scmd->eh_timeout.function)
- del_timer(&scmd->eh_timeout);
-
- scmd->eh_timeout.data = (unsigned long)scmd;
- scmd->eh_timeout.expires = jiffies + timeout;
- scmd->eh_timeout.function = (void (*)(unsigned long)) complete;
-
- SCSI_LOG_ERROR_RECOVERY(5, printk("%s: scmd: %p, time:"
- " %d, (%p)\n", __func__,
- scmd, timeout, complete));
-
- add_timer(&scmd->eh_timeout);
-}
-
-/**
- * scsi_delete_timer - Delete/cancel timer for a given function.
- * @scmd: Cmd that we are canceling timer for
- *
- * Notes:
- * This should be turned into an inline function.
- *
- * Return value:
- * 1 if we were able to detach the timer. 0 if we blew it, and the
- * timer function has already started to run.
- */
-int scsi_delete_timer(struct scsi_cmnd *scmd)
-{
- int rtn;
-
- rtn = del_timer(&scmd->eh_timeout);
-
- SCSI_LOG_ERROR_RECOVERY(5, printk("%s: scmd: %p,"
- " rtn: %d\n", __func__,
- scmd, rtn));
-
- scmd->eh_timeout.data = (unsigned long)NULL;
- scmd->eh_timeout.function = NULL;
-
- return rtn;
-}
-
/**
* scsi_times_out - Timeout function for normal scsi commands.
- * @scmd: Cmd that is timing out.
+ * @req: request that is timing out.
*
* Notes:
* We do not need to lock this. There is the potential for a race
* normal completion function determines that the timer has already
* fired, then it mustn't do anything.
*/
-void scsi_times_out(struct scsi_cmnd *scmd)
+enum blk_eh_timer_return scsi_times_out(struct request *req)
{
- enum scsi_eh_timer_return (* eh_timed_out)(struct scsi_cmnd *);
+ struct scsi_cmnd *scmd = req->special;
+ enum blk_eh_timer_return (*eh_timed_out)(struct scsi_cmnd *);
+ enum blk_eh_timer_return rtn = BLK_EH_NOT_HANDLED;
scsi_log_completion(scmd, TIMEOUT_ERROR);
eh_timed_out = NULL;
if (eh_timed_out)
- switch (eh_timed_out(scmd)) {
- case EH_HANDLED:
- __scsi_done(scmd);
- return;
- case EH_RESET_TIMER:
- scsi_add_timer(scmd, scmd->timeout_per_command,
- scsi_times_out);
- return;
- case EH_NOT_HANDLED:
+ rtn = eh_timed_out(scmd);
+ switch (rtn) {
+ case BLK_EH_NOT_HANDLED:
break;
+ default:
+ return rtn;
}
if (unlikely(!scsi_eh_scmd_add(scmd, SCSI_EH_CANCEL_CMD))) {
scmd->result |= DID_TIME_OUT << 16;
- __scsi_done(scmd);
+ return BLK_EH_HANDLED;
}
+
+ return BLK_EH_NOT_HANDLED;
}
/**
case HARDWARE_ERROR:
if (scmd->device->retry_hwerror)
- return NEEDS_RETRY;
+ return ADD_TO_MLQUEUE;
else
return SUCCESS;
return;
}
+/**
+ * scsi_noretry_cmd - determinte if command should be failed fast
+ * @scmd: SCSI cmd to examine.
+ */
+int scsi_noretry_cmd(struct scsi_cmnd *scmd)
+{
+ switch (host_byte(scmd->result)) {
+ case DID_OK:
+ break;
+ case DID_BUS_BUSY:
+ return blk_failfast_transport(scmd->request);
+ case DID_PARITY:
+ return blk_failfast_dev(scmd->request);
+ case DID_ERROR:
+ if (msg_byte(scmd->result) == COMMAND_COMPLETE &&
+ status_byte(scmd->result) == RESERVATION_CONFLICT)
+ return 0;
+ /* fall through */
+ case DID_SOFT_ERROR:
+ return blk_failfast_driver(scmd->request);
+ }
+
+ switch (status_byte(scmd->result)) {
+ case CHECK_CONDITION:
+ /*
+ * assume caller has checked sense and determinted
+ * the check condition was retryable.
+ */
+ return blk_failfast_dev(scmd->request);
+ }
+
+ return 0;
+}
+
/**
* scsi_decide_disposition - Disposition a cmd on return from LLD.
* @scmd: SCSI cmd to examine.
case DID_REQUEUE:
return ADD_TO_MLQUEUE;
-
+ case DID_TRANSPORT_DISRUPTED:
+ /*
+ * LLD/transport was disrupted during processing of the IO.
+ * The transport class is now blocked/blocking,
+ * and the transport will decide what to do with the IO
+ * based on its timers and recovery capablilities.
+ */
+ return ADD_TO_MLQUEUE;
+ case DID_TRANSPORT_FAILFAST:
+ /*
+ * The transport decided to failfast the IO (most likely
+ * the fast io fail tmo fired), so send IO directly upwards.
+ */
+ return SUCCESS;
case DID_ERROR:
if (msg_byte(scmd->result) == COMMAND_COMPLETE &&
status_byte(scmd->result) == RESERVATION_CONFLICT)
* even if the request is marked fast fail, we still requeue
* for queue congestion conditions (QUEUE_FULL or BUSY) */
if ((++scmd->retries) <= scmd->allowed
- && !blk_noretry_request(scmd->request)) {
+ && !scsi_noretry_cmd(scmd)) {
return NEEDS_RETRY;
} else {
/*
list_for_each_entry_safe(scmd, next, done_q, eh_entry) {
list_del_init(&scmd->eh_entry);
if (scsi_device_online(scmd->device) &&
- !blk_noretry_request(scmd->request) &&
+ !scsi_noretry_cmd(scmd) &&
(++scmd->retries <= scmd->allowed)) {
SCSI_LOG_ERROR_RECOVERY(3, printk("%s: flush"
" retry cmd: %p\n",
blk_rq_init(NULL, &req);
scmd->request = &req;
- memset(&scmd->eh_timeout, 0, sizeof(scmd->eh_timeout));
scmd->cmnd = req.cmd;
scmd->sc_data_direction = DMA_BIDIRECTIONAL;
- init_timer(&scmd->eh_timeout);
-
spin_lock_irqsave(shost->host_lock, flags);
shost->tmf_in_progress = 1;
spin_unlock_irqrestore(shost->host_lock, flags);
projects / linux-2.6-omap-h63xx.git / blobdiff