{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
struct circ_buf *xmit = &uart->port.info->xmit;
-#if !defined(CONFIG_BF54x) && !defined(CONFIG_SERIAL_BFIN_DMA)
- unsigned short ier;
-#endif
while (!(UART_GET_LSR(uart) & TEMT))
cpu_relax();
#ifdef CONFIG_BF54x
/* Clear TFI bit */
UART_PUT_LSR(uart, TFI);
- UART_CLEAR_IER(uart, ETBEI);
-#else
- ier = UART_GET_IER(uart);
- ier &= ~ETBEI;
- UART_PUT_IER(uart, ier);
#endif
+ UART_CLEAR_IER(uart, ETBEI);
#endif
}
if (uart->tx_done)
bfin_serial_dma_tx_chars(uart);
#else
-#ifdef CONFIG_BF54x
UART_SET_IER(uart, ETBEI);
-#else
- unsigned short ier;
- ier = UART_GET_IER(uart);
- ier |= ETBEI;
- UART_PUT_IER(uart, ier);
-#endif
bfin_serial_tx_chars(uart);
#endif
}
static void bfin_serial_stop_rx(struct uart_port *port)
{
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
-#ifdef CONFIG_KGDB_UART
- if (uart->port.line != CONFIG_KGDB_UART_PORT) {
+#ifdef CONFIG_KGDB_UART
+ if (uart->port.line != CONFIG_KGDB_UART_PORT)
#endif
-#ifdef CONFIG_BF54x
UART_CLEAR_IER(uart, ERBFI);
-#else
- unsigned short ier;
-
- ier = UART_GET_IER(uart);
- ier &= ~ERBFI;
- UART_PUT_IER(uart, ier);
-#endif
-#ifdef CONFIG_KGDB_UART
- }
-#endif
}
/*
{
struct bfin_serial_port *uart;
- if (CONFIG_KGDB_UART_PORT<0 || CONFIG_KGDB_UART_PORT>=NR_PORTS)
+ if (CONFIG_KGDB_UART_PORT < 0
+ || CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS)
uart = &bfin_serial_ports[0];
else
uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
SSYNC();
}
-#ifndef CONFIG_BF54x
- UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB));
- SSYNC();
-#endif
+ UART_CLEAR_DLAB(uart);
UART_PUT_CHAR(uart, (unsigned char)chr);
SSYNC();
}
struct bfin_serial_port *uart;
unsigned char chr;
- if (CONFIG_KGDB_UART_PORT<0 || CONFIG_KGDB_UART_PORT>=NR_PORTS)
+ if (CONFIG_KGDB_UART_PORT < 0
+ || CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS)
uart = &bfin_serial_ports[0];
else
uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
while(!(UART_GET_LSR(uart) & DR)) {
SSYNC();
}
-#ifndef CONFIG_BF54x
- UART_PUT_LCR(uart, UART_GET_LCR(uart)&(~DLAB));
- SSYNC();
-#endif
+ UART_CLEAR_DLAB(uart);
chr = UART_GET_CHAR(uart);
SSYNC();
}
#endif
-#if ANOMALY_05000230 && defined(CONFIG_SERIAL_BFIN_PIO)
+#if ANOMALY_05000363 && defined(CONFIG_SERIAL_BFIN_PIO)
# define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold)
# define UART_SET_ANOMALY_THRESHOLD(uart, v) ((uart)->anomaly_threshold = (v))
#else
struct tty_struct *tty = uart->port.info->tty;
unsigned int status, ch, flg;
static struct timeval anomaly_start = { .tv_sec = 0 };
-#ifdef CONFIG_KGDB_UART
- struct pt_regs *regs = get_irq_regs();
-#endif
status = UART_GET_LSR(uart);
UART_CLEAR_LSR(uart);
#ifdef CONFIG_KGDB_UART
if (uart->port.line == CONFIG_KGDB_UART_PORT) {
+ struct pt_regs *regs = get_irq_regs();
if (uart->port.cons->index == CONFIG_KGDB_UART_PORT && ch == 0x1) { /* Ctrl + A */
kgdb_breakkey_pressed(regs);
return;
}
#endif
- if (ANOMALY_05000230) {
+ if (ANOMALY_05000363) {
/* The BF533 (and BF561) family of processors have a nice anomaly
* where they continuously generate characters for a "single" break.
* We have to basically ignore this flood until the "next" valid
* timeout was picked as it must absolutely be larger than 1
* character time +/- some percent. So 1.5 sounds good. All other
* Blackfin families operate properly. Woo.
- * Note: While Anomaly 05000230 does not directly address this,
- * the changes that went in for it also fixed this issue.
- * That anomaly was fixed in 0.5+ silicon. I like bunnies.
*/
if (anomaly_start.tv_sec) {
struct timeval curr;
}
if (status & BI) {
- if (ANOMALY_05000230)
+ if (ANOMALY_05000363)
if (bfin_revid() < 5)
do_gettimeofday(&anomaly_start);
uart->port.icount.brk++;
static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart)
{
struct circ_buf *xmit = &uart->port.info->xmit;
- unsigned short ier;
uart->tx_done = 0;
set_dma_x_modify(uart->tx_dma_channel, 1);
enable_dma(uart->tx_dma_channel);
-#ifdef CONFIG_BF54x
UART_SET_IER(uart, ETBEI);
-#else
- ier = UART_GET_IER(uart);
- ier |= ETBEI;
- UART_PUT_IER(uart, ier);
-#endif
}
static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart)
uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
}
- uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
- add_timer(&(uart->rx_dma_timer));
+ mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES);
}
static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
{
struct bfin_serial_port *uart = dev_id;
struct circ_buf *xmit = &uart->port.info->xmit;
- unsigned short ier;
spin_lock(&uart->port.lock);
if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) {
disable_dma(uart->tx_dma_channel);
clear_dma_irqstat(uart->tx_dma_channel);
-#ifdef CONFIG_BF54x
UART_CLEAR_IER(uart, ETBEI);
-#else
- ier = UART_GET_IER(uart);
- ier &= ~ETBEI;
- UART_PUT_IER(uart, ier);
-#endif
xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1);
uart->port.icount.tx += uart->tx_count;
clear_dma_irqstat(uart->rx_dma_channel);
spin_unlock(&uart->port.lock);
- del_timer(&(uart->rx_dma_timer));
- uart->rx_dma_timer.expires = jiffies;
- add_timer(&(uart->rx_dma_timer));
+ mod_timer(&(uart->rx_dma_timer), jiffies);
return IRQ_HANDLED;
}
# endif
}
-
if (request_irq
(uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED,
"BFIN_UART_TX", uart)) {
return -EBUSY;
}
#endif
-#ifdef CONFIG_BF54x
UART_SET_IER(uart, ERBFI);
-#else
- UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
-#endif
return 0;
}
break;
default:
printk(KERN_ERR "%s: word lengh not supported\n",
- __FUNCTION__);
+ __func__);
}
if (termios->c_cflag & CSTOPB)
UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15);
- do {
- lsr = UART_GET_LSR(uart);
- } while (!(lsr & TEMT));
-
/* Disable UART */
ier = UART_GET_IER(uart);
#ifdef CONFIG_BF54x
UART_PUT_IER(uart, 0);
#endif
-#ifndef CONFIG_BF54x
/* Set DLAB in LCR to Access DLL and DLH */
- val = UART_GET_LCR(uart);
- val |= DLAB;
- UART_PUT_LCR(uart, val);
- SSYNC();
-#endif
+ UART_SET_DLAB(uart);
UART_PUT_DLL(uart, quot & 0xFF);
- SSYNC();
UART_PUT_DLH(uart, (quot >> 8) & 0xFF);
SSYNC();
-#ifndef CONFIG_BF54x
/* Clear DLAB in LCR to Access THR RBR IER */
- val = UART_GET_LCR(uart);
- val &= ~DLAB;
- UART_PUT_LCR(uart, val);
- SSYNC();
-#endif
+ UART_CLEAR_DLAB(uart);
UART_PUT_LCR(uart, lcr);
status = UART_GET_IER(uart) & (ERBFI | ETBEI);
if (status == (ERBFI | ETBEI)) {
/* ok, the port was enabled */
- unsigned short lcr, val;
- unsigned short dlh, dll;
+ u16 lcr, dlh, dll;
lcr = UART_GET_LCR(uart);
case 2: *bits = 7; break;
case 3: *bits = 8; break;
}
-#ifndef CONFIG_BF54x
/* Set DLAB in LCR to Access DLL and DLH */
- val = UART_GET_LCR(uart);
- val |= DLAB;
- UART_PUT_LCR(uart, val);
-#endif
+ UART_SET_DLAB(uart);
dll = UART_GET_DLL(uart);
dlh = UART_GET_DLH(uart);
-#ifndef CONFIG_BF54x
/* Clear DLAB in LCR to Access THR RBR IER */
- val = UART_GET_LCR(uart);
- val &= ~DLAB;
- UART_PUT_LCR(uart, val);
-#endif
+ UART_CLEAR_DLAB(uart);
*baud = get_sclk() / (16*(dll | dlh << 8));
}
- pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __FUNCTION__, *baud, *parity, *bits);
+ pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits);
}
#endif
.dev_name = BFIN_SERIAL_NAME,
.major = BFIN_SERIAL_MAJOR,
.minor = BFIN_SERIAL_MINOR,
- .nr = NR_PORTS,
+ .nr = BFIN_UART_NR_PORTS,
.cons = BFIN_SERIAL_CONSOLE,
};
request_irq(uart->port.irq, bfin_serial_rx_int,
IRQF_DISABLED, "BFIN_UART_RX", uart);
pr_info("Request irq for kgdb uart port\n");
-#ifdef CONFIG_BF54x
UART_SET_IER(uart, ERBFI);
-#else
- UART_PUT_IER(uart, UART_GET_IER(uart) | ERBFI);
-#endif
SSYNC();
t.c_cflag = CS8|B57600;
t.c_iflag = 0;
projects / linux-2.6-omap-h63xx.git / blobdiff