--- /dev/null
+/*
+ * Line6 Linux USB driver - 0.8.0
+ *
+ * Copyright (C) 2004-2009 Markus Grabner (grabner@icg.tugraz.at)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ *
+ */
+
+#ifndef LINE6_CONTROL_H
+#define LINE6_CONTROL_H
+
+
+/**
+ List of PODxt Pro controls.
+ See Appendix C of the "PODxt (Pro) Pilot's Handbook" by Line6.
+ Comments after the number refer to the PODxt Pro firmware version required
+ for this feature.
+*/
+enum {
+ POD_tweak = 1,
+ POD_wah_position = 4,
+ POD_compression_gain = 5, /* device: LINE6_BITS_PODXTALL */
+ POD_vol_pedal_position = 7,
+ POD_compression_threshold = 9,
+ POD_pan = 10,
+ POD_amp_model_setup = 11,
+ POD_amp_model = 12, /* firmware: 2.0 */
+ POD_drive = 13,
+ POD_bass = 14,
+ POD_mid = 15, /* device: LINE6_BITS_PODXTALL */
+ POD_lowmid = 15, /* device: LINE6_BITS_BASSPODXTALL */
+ POD_treble = 16, /* device: LINE6_BITS_PODXTALL */
+ POD_highmid = 16, /* device: LINE6_BITS_BASSPODXTALL */
+ POD_chan_vol = 17,
+ POD_reverb_mix = 18, /* device: LINE6_BITS_PODXTALL */
+ POD_effect_setup = 19,
+ POD_band_1_frequency = 20, /* firmware: 2.0 */
+ POD_presence = 21, /* device: LINE6_BITS_PODXTALL */
+ POD_treble__bass = 21, /* device: LINE6_BITS_BASSPODXTALL */
+ POD_noise_gate_enable = 22,
+ POD_gate_threshold = 23,
+ POD_gate_decay_time = 24,
+ POD_stomp_enable = 25,
+ POD_comp_enable = 26,
+ POD_stomp_time = 27,
+ POD_delay_enable = 28,
+ POD_mod_param_1 = 29,
+ POD_delay_param_1 = 30,
+ POD_delay_param_1_note_value = 31,
+ POD_band_2_frequency__bass = 32, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
+ POD_delay_param_2 = 33,
+ POD_delay_volume_mix = 34,
+ POD_delay_param_3 = 35,
+ POD_reverb_enable = 36, /* device: LINE6_BITS_PODXTALL */
+ POD_reverb_type = 37, /* device: LINE6_BITS_PODXTALL */
+ POD_reverb_decay = 38, /* device: LINE6_BITS_PODXTALL */
+ POD_reverb_tone = 39, /* device: LINE6_BITS_PODXTALL */
+ POD_reverb_pre_delay = 40, /* device: LINE6_BITS_PODXTALL */
+ POD_reverb_pre_post = 41, /* device: LINE6_BITS_PODXTALL */
+ POD_band_2_frequency = 42, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
+ POD_band_3_frequency__bass = 42, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
+ POD_wah_enable = 43,
+ POD_modulation_lo_cut = 44, /* device: LINE6_BITS_BASSPODXTALL */
+ POD_delay_reverb_lo_cut = 45, /* device: LINE6_BITS_BASSPODXTALL */
+ POD_volume_pedal_minimum = 46, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
+ POD_eq_pre_post = 46, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
+ POD_volume_pre_post = 47,
+ POD_di_model = 48, /* device: LINE6_BITS_BASSPODXTALL */
+ POD_di_delay = 49, /* device: LINE6_BITS_BASSPODXTALL */
+ POD_mod_enable = 50,
+ POD_mod_param_1_note_value = 51,
+ POD_mod_param_2 = 52,
+ POD_mod_param_3 = 53,
+ POD_mod_param_4 = 54,
+ POD_mod_param_5 = 55, /* device: LINE6_BITS_BASSPODXTALL */
+ POD_mod_volume_mix = 56,
+ POD_mod_pre_post = 57,
+ POD_modulation_model = 58,
+ POD_band_3_frequency = 60, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
+ POD_band_4_frequency__bass = 60, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
+ POD_mod_param_1_double_precision = 61,
+ POD_delay_param_1_double_precision = 62,
+ POD_eq_enable = 63, /* firmware: 2.0 */
+ POD_tap = 64,
+ POD_volume_tweak_pedal_assign = 65,
+ POD_band_5_frequency = 68, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
+ POD_tuner = 69,
+ POD_mic_selection = 70,
+ POD_cabinet_model = 71,
+ POD_stomp_model = 75,
+ POD_roomlevel = 76,
+ POD_band_4_frequency = 77, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
+ POD_band_6_frequency = 77, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
+ POD_stomp_param_1_note_value = 78,
+ POD_stomp_param_2 = 79,
+ POD_stomp_param_3 = 80,
+ POD_stomp_param_4 = 81,
+ POD_stomp_param_5 = 82,
+ POD_stomp_param_6 = 83,
+ POD_amp_switch_select = 84, /* device: LINE6_BITS_LIVE */
+ POD_delay_param_4 = 85,
+ POD_delay_param_5 = 86,
+ POD_delay_pre_post = 87,
+ POD_delay_model = 88, /* device: LINE6_BITS_PODXTALL */
+ POD_delay_verb_model = 88, /* device: LINE6_BITS_BASSPODXTALL */
+ POD_tempo_msb = 89,
+ POD_tempo_lsb = 90,
+ POD_wah_model = 91, /* firmware: 3.0 */
+ POD_bypass_volume = 105, /* firmware: 2.14 */
+ POD_fx_loop_on_off = 107, /* device: LINE6_BITS_PRO */
+ POD_tweak_param_select = 108,
+ POD_amp1_engage = 111,
+ POD_band_1_gain = 114, /* firmware: 2.0 */
+ POD_band_2_gain__bass = 115, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
+ POD_band_2_gain = 116, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
+ POD_band_3_gain__bass = 116, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
+ POD_band_3_gain = 117, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
+ POD_band_4_gain__bass = 117, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
+ POD_band_5_gain__bass = 118, /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
+ POD_band_4_gain = 119, /* device: LINE6_BITS_PODXTALL */ /* firmware: 2.0 */
+ POD_band_6_gain__bass = 119 /* device: LINE6_BITS_BASSPODXTALL */ /* firmware: 2.0 */
+};
+
+/**
+ List of Variax workbench controls (dump).
+*/
+enum {
+ VARIAX_body = 3,
+ VARIAX_pickup1_enable = 4, /* 0: enabled, 1: disabled */
+ VARIAX_pickup1_type = 8,
+ VARIAX_pickup1_position = 9, /* type: 24 bit float */
+ VARIAX_pickup1_angle = 12, /* type: 24 bit float */
+ VARIAX_pickup1_level = 15, /* type: 24 bit float */
+ VARIAX_pickup2_enable = 18, /* 0: enabled, 1: disabled */
+ VARIAX_pickup2_type = 22,
+ VARIAX_pickup2_position = 23, /* type: 24 bit float */
+ VARIAX_pickup2_angle = 26, /* type: 24 bit float */
+ VARIAX_pickup2_level = 29, /* type: 24 bit float */
+ VARIAX_pickup_phase = 32, /* 0: in phase, 1: out of phase */
+ VARIAX_capacitance = 33, /* type: 24 bit float */
+ VARIAX_tone_resistance = 36, /* type: 24 bit float */
+ VARIAX_volume_resistance = 39, /* type: 24 bit float */
+ VARIAX_taper = 42, /* 0: Linear, 1: Audio */
+ VARIAX_tone_dump = 43, /* type: 24 bit float */
+ VARIAX_save_tone = 46,
+ VARIAX_volume_dump = 47, /* type: 24 bit float */
+ VARIAX_tuning_enable = 50,
+ VARIAX_tuning6 = 51,
+ VARIAX_tuning5 = 52,
+ VARIAX_tuning4 = 53,
+ VARIAX_tuning3 = 54,
+ VARIAX_tuning2 = 55,
+ VARIAX_tuning1 = 56,
+ VARIAX_detune6 = 57, /* type: 24 bit float */
+ VARIAX_detune5 = 60, /* type: 24 bit float */
+ VARIAX_detune4 = 63, /* type: 24 bit float */
+ VARIAX_detune3 = 66, /* type: 24 bit float */
+ VARIAX_detune2 = 69, /* type: 24 bit float */
+ VARIAX_detune1 = 72, /* type: 24 bit float */
+ VARIAX_mix6 = 75, /* type: 24 bit float */
+ VARIAX_mix5 = 78, /* type: 24 bit float */
+ VARIAX_mix4 = 81, /* type: 24 bit float */
+ VARIAX_mix3 = 84, /* type: 24 bit float */
+ VARIAX_mix2 = 87, /* type: 24 bit float */
+ VARIAX_mix1 = 90, /* type: 24 bit float */
+ VARIAX_pickup_wiring = 96 /* 0: parallel, 1: series */
+};
+
+/**
+ List of Variax workbench controls (MIDI).
+*/
+enum {
+ VARIAXMIDI_volume = 7,
+ VARIAXMIDI_tone = 79,
+};
+
+
+extern int pod_create_files(int firmware, int type, struct device *dev);
+extern void pod_remove_files(int firmware, int type, struct device *dev);
+extern int variax_create_files(int firmware, int type, struct device *dev);
+extern void variax_remove_files(int firmware, int type, struct device *dev);
+
+
+#endif
projects / linux-2.6-omap-h63xx.git / blobdiff