/* System Includes */
#define WLAN_DBVAR prism2_debug
-#include "version.h"
-
-
-#include <linux/version.h>
#include <linux/if_arp.h>
#include <linux/module.h>
#include <asm/io.h>
#include <asm/byteorder.h>
#include <linux/random.h>
-
-#if (WLAN_HOSTIF == WLAN_USB)
#include <linux/usb.h>
-#endif
-
-#if (WLAN_HOSTIF == WLAN_PCMCIA)
-#include <pcmcia/version.h>
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/ds.h>
-#include <pcmcia/cisreg.h>
-#endif
#include "wlan_compat.h"
#include "hfa384x.h"
#include "prism2mgmt.h"
-/*================================================================*/
-/* Local Constants */
-
-
-/*================================================================*/
-/* Local Macros */
-
/* Converts 802.11 format rate specifications to prism2 */
#define p80211rate_to_p2bit(n) ((((n)&~BIT7) == 2) ? BIT0 : \
(((n)&~BIT7) == 4) ? BIT1 : \
(((n)&~BIT7) == 11) ? BIT2 : \
(((n)&~BIT7) == 22) ? BIT3 : 0)
-/*================================================================*/
-/* Local Types */
-
-
-/*================================================================*/
-/* Local Static Definitions */
-
-
-/*================================================================*/
-/* Local Function Declarations */
-
-
-/*================================================================*/
-/* Function Definitions */
-
-
-/*----------------------------------------------------------------
-* prism2mgmt_powermgmt
-*
-* Set the power management state of this station's MAC.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-* interrupt
-----------------------------------------------------------------*/
-int prism2mgmt_powermgmt(wlandevice_t *wlandev, void *msgp)
-{
- int result = 0;
- hfa384x_t *hw = wlandev->priv;
- p80211msg_dot11req_powermgmt_t *msg = msgp;
-
- DBFENTER;
-
- if (!hw->ap) {
-
- /*** STATION ***/
-
- /*
- * Set CNFPMENABLED (on or off)
- * Set CNFMULTICASTRX (if PM on, otherwise clear)
- * Spout a notice stating that SleepDuration and
- * HoldoverDuration and PMEPS also have an impact.
- */
- /* Powermgmt is currently unsupported for STA */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- } else {
-
- /*** ACCESS POINT ***/
-
- /* Powermgmt is never supported for AP */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- }
-
- DBFEXIT;
- return result;
-}
-
-
/*----------------------------------------------------------------
* prism2mgmt_scan
*
int result = 0;
hfa384x_t *hw = wlandev->priv;
p80211msg_dot11req_scan_t *msg = msgp;
- UINT16 roamingmode, word;
+ u16 roamingmode, word;
int i, timeout;
int istmpenable = 0;
DBFENTER;
- if (hw->ap) {
- WLAN_LOG_ERROR("Prism2 in AP mode cannot perform scans.\n");
- result = 1;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- goto exit;
- }
-
/* gatekeeper check */
if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
hw->ident_sta_fw.minor,
/* set up the channel list */
word = 0;
for (i = 0; i < msg->channellist.data.len; i++) {
- UINT8 channel = msg->channellist.data.data[i];
+ u8 channel = msg->channellist.data.data[i];
if (channel > 14) continue;
/* channel 1 is BIT0 ... channel 14 is BIT13 */
word |= (1 << (channel-1));
goto exit;
}
if (word == HFA384x_PORTSTATUS_DISABLED) {
- UINT16 wordbuf[17];
+ u16 wordbuf[17];
result = hfa384x_drvr_setconfig16(hw,
HFA384x_RID_CNFROAMINGMODE,
req->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- if (hw->ap) {
- result = 1;
- req->resultcode.data = P80211ENUM_resultcode_not_supported;
- goto exit;
- }
-
if (! hw->scanresults) {
WLAN_LOG_ERROR("dot11req_scan_results can only be used after a successful dot11req_scan.\n");
result = 2;
return result;
}
-
/*----------------------------------------------------------------
-* prism2mgmt_join
+* prism2mgmt_start
*
-* Join a BSS whose BSS description was previously obtained with
-* a scan.
+* Start a BSS. Any station can do this for IBSS, only AP for ESS.
*
* Arguments:
* wlandev wlan device structure
* process thread (usually)
* interrupt
----------------------------------------------------------------*/
-int prism2mgmt_join(wlandevice_t *wlandev, void *msgp)
+int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
{
int result = 0;
hfa384x_t *hw = wlandev->priv;
- p80211msg_dot11req_join_t *msg = msgp;
+ p80211msg_dot11req_start_t *msg = msgp;
+
+ p80211pstrd_t *pstr;
+ u8 bytebuf[80];
+ hfa384x_bytestr_t *p2bytestr = (hfa384x_bytestr_t*)bytebuf;
+ u16 word;
DBFENTER;
- if (!hw->ap) {
+ wlandev->macmode = WLAN_MACMODE_NONE;
- /*** STATION ***/
+ /* Set the SSID */
+ memcpy(&wlandev->ssid, &msg->ssid.data, sizeof(msg->ssid.data));
- /* TODO: Implement after scan */
+ /*** ADHOC IBSS ***/
+ /* see if current f/w is less than 8c3 */
+ if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
+ hw->ident_sta_fw.minor,
+ hw->ident_sta_fw.variant) <
+ HFA384x_FIRMWARE_VERSION(0,8,3)) {
+ /* Ad-Hoc not quite supported on Prism2 */
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- } else {
+ goto done;
+ }
- /*** ACCESS POINT ***/
+ msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- /* Never supported by APs */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
+ /*** STATION ***/
+ /* Set the REQUIRED config items */
+ /* SSID */
+ pstr = (p80211pstrd_t*)&(msg->ssid.data);
+ prism2mgmt_pstr2bytestr(p2bytestr, pstr);
+ result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFOWNSSID,
+ bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
+ if ( result ) {
+ WLAN_LOG_ERROR("Failed to set CnfOwnSSID\n");
+ goto failed;
+ }
+ result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFDESIREDSSID,
+ bytebuf, HFA384x_RID_CNFDESIREDSSID_LEN);
+ if ( result ) {
+ WLAN_LOG_ERROR("Failed to set CnfDesiredSSID\n");
+ goto failed;
+ }
+
+ /* bsstype - we use the default in the ap firmware */
+ /* IBSS port */
+ hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 0);
+
+ /* beacon period */
+ word = msg->beaconperiod.data;
+ result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAPBCNint, word);
+ if ( result ) {
+ WLAN_LOG_ERROR("Failed to set beacon period=%d.\n", word);
+ goto failed;
+ }
+
+ /* dschannel */
+ word = msg->dschannel.data;
+ result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFOWNCHANNEL, word);
+ if ( result ) {
+ WLAN_LOG_ERROR("Failed to set channel=%d.\n", word);
+ goto failed;
+ }
+ /* Basic rates */
+ word = p80211rate_to_p2bit(msg->basicrate1.data);
+ if ( msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok ) {
+ word |= p80211rate_to_p2bit(msg->basicrate2.data);
+ }
+ if ( msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok ) {
+ word |= p80211rate_to_p2bit(msg->basicrate3.data);
+ }
+ if ( msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok ) {
+ word |= p80211rate_to_p2bit(msg->basicrate4.data);
+ }
+ if ( msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok ) {
+ word |= p80211rate_to_p2bit(msg->basicrate5.data);
+ }
+ if ( msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok ) {
+ word |= p80211rate_to_p2bit(msg->basicrate6.data);
+ }
+ if ( msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok ) {
+ word |= p80211rate_to_p2bit(msg->basicrate7.data);
+ }
+ if ( msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok ) {
+ word |= p80211rate_to_p2bit(msg->basicrate8.data);
+ }
+ result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, word);
+ if ( result ) {
+ WLAN_LOG_ERROR("Failed to set basicrates=%d.\n", word);
+ goto failed;
+ }
+
+ /* Operational rates (supprates and txratecontrol) */
+ word = p80211rate_to_p2bit(msg->operationalrate1.data);
+ if ( msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok ) {
+ word |= p80211rate_to_p2bit(msg->operationalrate2.data);
+ }
+ if ( msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok ) {
+ word |= p80211rate_to_p2bit(msg->operationalrate3.data);
+ }
+ if ( msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok ) {
+ word |= p80211rate_to_p2bit(msg->operationalrate4.data);
+ }
+ if ( msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok ) {
+ word |= p80211rate_to_p2bit(msg->operationalrate5.data);
+ }
+ if ( msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok ) {
+ word |= p80211rate_to_p2bit(msg->operationalrate6.data);
+ }
+ if ( msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok ) {
+ word |= p80211rate_to_p2bit(msg->operationalrate7.data);
+ }
+ if ( msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok ) {
+ word |= p80211rate_to_p2bit(msg->operationalrate8.data);
+ }
+ result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, word);
+ if ( result ) {
+ WLAN_LOG_ERROR("Failed to set supprates=%d.\n", word);
+ goto failed;
+ }
+
+ result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, word);
+ if ( result ) {
+ WLAN_LOG_ERROR("Failed to set txrates=%d.\n", word);
+ goto failed;
+ }
+
+ /* Set the macmode so the frame setup code knows what to do */
+ if ( msg->bsstype.data == P80211ENUM_bsstype_independent ) {
+ wlandev->macmode = WLAN_MACMODE_IBSS_STA;
+ /* lets extend the data length a bit */
+ hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFMAXDATALEN, 2304);
+ }
+
+ /* Enable the Port */
+ result = hfa384x_drvr_enable(hw, 0);
+ if ( result ) {
+ WLAN_LOG_ERROR("Enable macport failed, result=%d.\n", result);
+ goto failed;
}
+ msg->resultcode.data = P80211ENUM_resultcode_success;
+
+ goto done;
+failed:
+ WLAN_LOG_DEBUG(1, "Failed to set a config option, result=%d\n", result);
+ msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
+
+done:
+ result = 0;
+
DBFEXIT;
return result;
}
-
/*----------------------------------------------------------------
-* prism2mgmt_p2_join
+* prism2mgmt_readpda
*
-* Join a specific BSS
+* Collect the PDA data and put it in the message.
*
* Arguments:
* wlandev wlan device structure
*
* Call context:
* process thread (usually)
-* interrupt
----------------------------------------------------------------*/
-int prism2mgmt_p2_join(wlandevice_t *wlandev, void *msgp)
+int prism2mgmt_readpda(wlandevice_t *wlandev, void *msgp)
{
- int result = 0;
hfa384x_t *hw = wlandev->priv;
- p80211msg_p2req_join_t *msg = msgp;
- UINT16 reg;
- p80211pstrd_t *pstr;
- UINT8 bytebuf[256];
- hfa384x_bytestr_t *p2bytestr = (hfa384x_bytestr_t*)bytebuf;
- hfa384x_JoinRequest_data_t joinreq;
+ p80211msg_p2req_readpda_t *msg = msgp;
+ int result;
DBFENTER;
- if (!hw->ap) {
-
- wlandev->macmode = WLAN_MACMODE_NONE;
-
- /*** STATION ***/
- /* Set the PortType */
+ /* We only support collecting the PDA when in the FWLOAD
+ * state.
+ */
+ if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
+ WLAN_LOG_ERROR(
+ "PDA may only be read "
+ "in the fwload state.\n");
+ msg->resultcode.data =
+ P80211ENUM_resultcode_implementation_failure;
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_success;
+ } else {
+ /* Call drvr_readpda(), it handles the auxport enable
+ * and validating the returned PDA.
+ */
+ result = hfa384x_drvr_readpda(
+ hw,
+ msg->pda.data,
+ HFA384x_PDA_LEN_MAX);
+ if (result) {
+ WLAN_LOG_ERROR(
+ "hfa384x_drvr_readpda() failed, "
+ "result=%d\n",
+ result);
- /* ess port */
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 1);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set Port Type\n");
- goto failed;
+ msg->resultcode.data =
+ P80211ENUM_resultcode_implementation_failure;
+ msg->resultcode.status =
+ P80211ENUM_msgitem_status_data_ok;
+ DBFEXIT;
+ return 0;
}
-
- /* Set the auth type */
- if ( msg->authtype.data == P80211ENUM_authalg_sharedkey ) {
- reg = HFA384x_CNFAUTHENTICATION_SHAREDKEY;
- } else {
- reg = HFA384x_CNFAUTHENTICATION_OPENSYSTEM;
- }
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAUTHENTICATION, reg);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set Authentication\n");
- goto failed;
- }
-
- /* Turn off all roaming */
- hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFROAMINGMODE, 3);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to Turn off Roaming\n");
- goto failed;
- }
-
- /* Basic rates */
- reg = 0;
- if ( msg->basicrate1.status == P80211ENUM_msgitem_status_data_ok ) {
- reg = p80211rate_to_p2bit(msg->basicrate1.data);
- }
- if ( msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->basicrate2.data);
- }
- if ( msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->basicrate3.data);
- }
- if ( msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->basicrate4.data);
- }
- if ( msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->basicrate5.data);
- }
- if ( msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->basicrate6.data);
- }
- if ( msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->basicrate7.data);
- }
- if ( msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->basicrate8.data);
- }
- if( reg == 0)
- reg = 0x03;
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, reg);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set basicrates=%d.\n", reg);
- goto failed;
- }
-
- /* Operational rates (supprates and txratecontrol) */
- reg = 0;
- if ( msg->operationalrate1.status == P80211ENUM_msgitem_status_data_ok ) {
- reg = p80211rate_to_p2bit(msg->operationalrate1.data);
- }
- if ( msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->operationalrate2.data);
- }
- if ( msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->operationalrate3.data);
- }
- if ( msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->operationalrate4.data);
- }
- if ( msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->operationalrate5.data);
- }
- if ( msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->operationalrate6.data);
- }
- if ( msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->operationalrate7.data);
- }
- if ( msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok ) {
- reg |= p80211rate_to_p2bit(msg->operationalrate8.data);
- }
- if( reg == 0)
- reg = 0x0f;
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, reg);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set supprates=%d.\n", reg);
- goto failed;
- }
-
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, reg);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set txrates=%d.\n", reg);
- goto failed;
- }
-
- /* Set the ssid */
- memset(bytebuf, 0, 256);
- pstr = (p80211pstrd_t*)&(msg->ssid.data);
- prism2mgmt_pstr2bytestr(p2bytestr, pstr);
- result = hfa384x_drvr_setconfig(
- hw, HFA384x_RID_CNFDESIREDSSID,
- bytebuf, HFA384x_RID_CNFDESIREDSSID_LEN);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set SSID\n");
- goto failed;
- }
-
- /* Enable the Port */
- result = hfa384x_cmd_enable(hw, 0);
- if ( result ) {
- WLAN_LOG_ERROR("Enable macport failed, result=%d.\n", result);
- goto failed;
- }
-
- /* Fill in the join request */
- joinreq.channel = msg->channel.data;
- memcpy( joinreq.bssid, ((unsigned char *) &msg->bssid.data) + 1, WLAN_BSSID_LEN);
- hw->joinreq = joinreq;
- hw->join_ap = 1;
-
- /* Send the join request */
- result = hfa384x_drvr_setconfig( hw,
- HFA384x_RID_JOINREQUEST,
- &joinreq, HFA384x_RID_JOINREQUEST_LEN);
- if(result != 0) {
- WLAN_LOG_ERROR("Join request failed, result=%d.\n", result);
- goto failed;
- }
-
- } else {
-
- /*** ACCESS POINT ***/
-
- /* Never supported by APs */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- }
-
- goto done;
-failed:
- WLAN_LOG_DEBUG(1, "Failed to set a config option, result=%d\n", result);
- msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
-
-done:
- result = 0;
-
- DBFEXIT;
- return result;
-}
-
-
-/*----------------------------------------------------------------
-* prism2mgmt_authenticate
-*
-* Station should be begin an authentication exchange.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-* interrupt
-----------------------------------------------------------------*/
-int prism2mgmt_authenticate(wlandevice_t *wlandev, void *msgp)
-{
- int result = 0;
- hfa384x_t *hw = wlandev->priv;
- p80211msg_dot11req_authenticate_t *msg = msgp;
- DBFENTER;
-
- if (!hw->ap) {
-
- /*** STATION ***/
-
- /* TODO: Decide how we're going to handle this one w/ Prism2 */
- /* It could be entertaining since Prism2 doesn't have */
- /* an explicit way to control this */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- } else {
-
- /*** ACCESS POINT ***/
-
- /* Never supported by APs */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- }
-
- DBFEXIT;
- return result;
-}
-
-
-/*----------------------------------------------------------------
-* prism2mgmt_deauthenticate
-*
-* Send a deauthenticate notification.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-* interrupt
-----------------------------------------------------------------*/
-int prism2mgmt_deauthenticate(wlandevice_t *wlandev, void *msgp)
-{
- int result = 0;
- hfa384x_t *hw = wlandev->priv;
- p80211msg_dot11req_deauthenticate_t *msg = msgp;
- DBFENTER;
-
- if (!hw->ap) {
-
- /*** STATION ***/
-
- /* TODO: Decide how we're going to handle this one w/ Prism2 */
- /* It could be entertaining since Prism2 doesn't have */
- /* an explicit way to control this */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- } else {
-
- /*** ACCESS POINT ***/
- hfa384x_drvr_handover(hw, msg->peerstaaddress.data.data);
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_success;
- }
-
- DBFEXIT;
- return result;
-}
-
-
-/*----------------------------------------------------------------
-* prism2mgmt_associate
-*
-* Associate with an ESS.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-* interrupt
-----------------------------------------------------------------*/
-int prism2mgmt_associate(wlandevice_t *wlandev, void *msgp)
-{
- hfa384x_t *hw = wlandev->priv;
- int result = 0;
- p80211msg_dot11req_associate_t *msg = msgp;
- DBFENTER;
-
- if (!hw->ap) {
-
- /*** STATION ***/
-
-#if 0
- /* Set the TxRates */
- reg = 0x000f;
- hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, reg);
-#endif
-
- /* Set the PortType */
- /* ess port */
- hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 1);
-
- /* Enable the Port */
- hfa384x_drvr_enable(hw, 0);
-
- /* Set the resultcode */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_success;
-
- } else {
-
- /*** ACCESS POINT ***/
-
- /* Never supported on AP */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- }
-
- DBFEXIT;
- return result;
-}
-
-
-/*----------------------------------------------------------------
-* prism2mgmt_reassociate
-*
-* Renew association because of a BSS change.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-* interrupt
-----------------------------------------------------------------*/
-int prism2mgmt_reassociate(wlandevice_t *wlandev, void *msgp)
-{
- int result = 0;
- hfa384x_t *hw = wlandev->priv;
- p80211msg_dot11req_reassociate_t *msg = msgp;
- DBFENTER;
-
- if (!hw->ap) {
-
- /*** STATION ***/
-
- /* TODO: Not supported yet...not sure how we're going to do it */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- } else {
-
- /*** ACCESS POINT ***/
-
- /* Never supported on AP */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- }
-
- DBFEXIT;
- return result;
-}
-
-
-/*----------------------------------------------------------------
-* prism2mgmt_disassociate
-*
-* Send a disassociation notification.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-* interrupt
-----------------------------------------------------------------*/
-int prism2mgmt_disassociate(wlandevice_t *wlandev, void *msgp)
-{
- int result = 0;
- hfa384x_t *hw = wlandev->priv;
- p80211msg_dot11req_disassociate_t *msg = msgp;
- DBFENTER;
-
- if (!hw->ap) {
-
- /*** STATION ***/
-
- /* TODO: Not supported yet...not sure how to do it */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- } else {
-
- /*** ACCESS POINT ***/
- hfa384x_drvr_handover(hw, msg->peerstaaddress.data.data);
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_success;
- }
-
- DBFEXIT;
- return result;
-}
-
-
-/*----------------------------------------------------------------
-* prism2mgmt_reset
-*
-* Reset the MAC and MSD. The p80211 layer has it's own handling
-* that should be done before and after this function.
-* Procedure:
-* - disable system interrupts ??
-* - disable MAC interrupts
-* - restore system interrupts
-* - issue the MAC initialize command
-* - clear any MSD level state (including timers, queued events,
-* etc.). Note that if we're removing timer'd/queue events, we may
-* need to have remained in the system interrupt disabled state.
-* We should be left in the same state that we're in following
-* driver initialization.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer, MAY BE NULL! for a driver local
-* call.
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread, commonly wlanctl, but might be rmmod/pci_close.
-----------------------------------------------------------------*/
-int prism2mgmt_reset(wlandevice_t *wlandev, void *msgp)
-{
- int result = 0;
- hfa384x_t *hw = wlandev->priv;
- p80211msg_dot11req_reset_t *msg = msgp;
- DBFENTER;
-
- /*
- * This is supported on both AP and STA and it's not allowed
- * to fail.
- */
- if ( msgp ) {
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_success;
- WLAN_LOG_INFO("dot11req_reset: the macaddress and "
- "setdefaultmib arguments are currently unsupported.\n");
- }
-
- /*
- * If we got this far, the MSD must be in the MSDRUNNING state
- * therefore, we must stop and then restart the hw/MAC combo.
- */
- hfa384x_drvr_stop(hw);
- result = hfa384x_drvr_start(hw);
- if (result != 0) {
- WLAN_LOG_ERROR("dot11req_reset: Initialize command failed,"
- " bad things will happen from here.\n");
- return 0;
- }
-
- DBFEXIT;
- return 0;
-}
-
-
-/*----------------------------------------------------------------
-* prism2mgmt_start
-*
-* Start a BSS. Any station can do this for IBSS, only AP for ESS.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-* interrupt
-----------------------------------------------------------------*/
-int prism2mgmt_start(wlandevice_t *wlandev, void *msgp)
-{
- int result = 0;
- hfa384x_t *hw = wlandev->priv;
- p80211msg_dot11req_start_t *msg = msgp;
-
- p80211pstrd_t *pstr;
- UINT8 bytebuf[80];
- hfa384x_bytestr_t *p2bytestr = (hfa384x_bytestr_t*)bytebuf;
- hfa384x_PCFInfo_data_t *pcfinfo = (hfa384x_PCFInfo_data_t*)bytebuf;
- UINT16 word;
- DBFENTER;
-
- wlandev->macmode = WLAN_MACMODE_NONE;
-
- /* Set the SSID */
- memcpy(&wlandev->ssid, &msg->ssid.data, sizeof(msg->ssid.data));
-
- if (!hw->ap) {
- /*** ADHOC IBSS ***/
- /* see if current f/w is less than 8c3 */
- if (HFA384x_FIRMWARE_VERSION(hw->ident_sta_fw.major,
- hw->ident_sta_fw.minor,
- hw->ident_sta_fw.variant) <
- HFA384x_FIRMWARE_VERSION(0,8,3)) {
- /* Ad-Hoc not quite supported on Prism2 */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- goto done;
- }
-
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
-
- /*** STATION ***/
- /* Set the REQUIRED config items */
- /* SSID */
- pstr = (p80211pstrd_t*)&(msg->ssid.data);
- prism2mgmt_pstr2bytestr(p2bytestr, pstr);
- result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFOWNSSID,
- bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set CnfOwnSSID\n");
- goto failed;
- }
- result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFDESIREDSSID,
- bytebuf, HFA384x_RID_CNFDESIREDSSID_LEN);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set CnfDesiredSSID\n");
- goto failed;
- }
-
- /* bsstype - we use the default in the ap firmware */
- /* IBSS port */
- hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFPORTTYPE, 0);
-
- /* beacon period */
- word = msg->beaconperiod.data;
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAPBCNINT, word);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set beacon period=%d.\n", word);
- goto failed;
- }
-
- /* dschannel */
- word = msg->dschannel.data;
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFOWNCHANNEL, word);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set channel=%d.\n", word);
- goto failed;
- }
- /* Basic rates */
- word = p80211rate_to_p2bit(msg->basicrate1.data);
- if ( msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate2.data);
- }
- if ( msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate3.data);
- }
- if ( msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate4.data);
- }
- if ( msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate5.data);
- }
- if ( msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate6.data);
- }
- if ( msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate7.data);
- }
- if ( msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate8.data);
- }
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, word);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set basicrates=%d.\n", word);
- goto failed;
- }
-
- /* Operational rates (supprates and txratecontrol) */
- word = p80211rate_to_p2bit(msg->operationalrate1.data);
- if ( msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate2.data);
- }
- if ( msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate3.data);
- }
- if ( msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate4.data);
- }
- if ( msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate5.data);
- }
- if ( msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate6.data);
- }
- if ( msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate7.data);
- }
- if ( msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate8.data);
- }
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, word);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set supprates=%d.\n", word);
- goto failed;
- }
-
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL, word);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set txrates=%d.\n", word);
- goto failed;
- }
-
- /* Set the macmode so the frame setup code knows what to do */
- if ( msg->bsstype.data == P80211ENUM_bsstype_independent ) {
- wlandev->macmode = WLAN_MACMODE_IBSS_STA;
- /* lets extend the data length a bit */
- hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFMAXDATALEN, 2304);
- }
-
- /* Enable the Port */
- result = hfa384x_drvr_enable(hw, 0);
- if ( result ) {
- WLAN_LOG_ERROR("Enable macport failed, result=%d.\n", result);
- goto failed;
- }
-
- msg->resultcode.data = P80211ENUM_resultcode_success;
-
- goto done;
- }
-
- /*** ACCESS POINT ***/
-
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
-
- /* Validate the command, if BSStype=infra is the tertiary loaded? */
- if ( msg->bsstype.data == P80211ENUM_bsstype_independent ) {
- WLAN_LOG_ERROR("AP driver cannot create IBSS.\n");
- goto failed;
- } else if ( hw->cap_sup_sta.id != 5) {
- WLAN_LOG_ERROR("AP driver failed to detect AP firmware.\n");
- goto failed;
- }
-
- /* Set the REQUIRED config items */
- /* SSID */
- pstr = (p80211pstrd_t*)&(msg->ssid.data);
- prism2mgmt_pstr2bytestr(p2bytestr, pstr);
- result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CNFOWNSSID,
- bytebuf, HFA384x_RID_CNFOWNSSID_LEN);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set SSID, result=0x%04x\n", result);
- goto failed;
- }
-
- /* bsstype - we use the default in the ap firmware */
-
- /* beacon period */
- word = msg->beaconperiod.data;
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFAPBCNINT, word);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set beacon period=%d.\n", word);
- goto failed;
- }
-
- /* dschannel */
- word = msg->dschannel.data;
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFOWNCHANNEL, word);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set channel=%d.\n", word);
- goto failed;
- }
- /* Basic rates */
- word = p80211rate_to_p2bit(msg->basicrate1.data);
- if ( msg->basicrate2.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate2.data);
- }
- if ( msg->basicrate3.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate3.data);
- }
- if ( msg->basicrate4.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate4.data);
- }
- if ( msg->basicrate5.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate5.data);
- }
- if ( msg->basicrate6.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate6.data);
- }
- if ( msg->basicrate7.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate7.data);
- }
- if ( msg->basicrate8.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->basicrate8.data);
- }
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFBASICRATES, word);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set basicrates=%d.\n", word);
- goto failed;
- }
-
- /* Operational rates (supprates and txratecontrol) */
- word = p80211rate_to_p2bit(msg->operationalrate1.data);
- if ( msg->operationalrate2.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate2.data);
- }
- if ( msg->operationalrate3.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate3.data);
- }
- if ( msg->operationalrate4.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate4.data);
- }
- if ( msg->operationalrate5.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate5.data);
- }
- if ( msg->operationalrate6.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate6.data);
- }
- if ( msg->operationalrate7.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate7.data);
- }
- if ( msg->operationalrate8.status == P80211ENUM_msgitem_status_data_ok ) {
- word |= p80211rate_to_p2bit(msg->operationalrate8.data);
- }
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFSUPPRATES, word);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set supprates=%d.\n", word);
- goto failed;
- }
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_TXRATECNTL0, word);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set txrates=%d.\n", word);
- goto failed;
- }
-
- /* ibssatimwindow */
- if (msg->ibssatimwindow.status == P80211ENUM_msgitem_status_data_ok) {
- WLAN_LOG_INFO("prism2mgmt_start: atimwindow not used in "
- "Infrastructure mode, ignored.\n");
- }
-
- /* DTIM period */
- word = msg->dtimperiod.data;
- result = hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFOWNDTIMPER, word);
- if ( result ) {
- WLAN_LOG_ERROR("Failed to set dtim period=%d.\n", word);
- goto failed;
- }
-
- /* probedelay */
- if (msg->probedelay.status == P80211ENUM_msgitem_status_data_ok) {
- WLAN_LOG_INFO("prism2mgmt_start: probedelay not "
- "supported in prism2, ignored.\n");
- }
-
- /* cfpollable, cfpollreq, cfpperiod, cfpmaxduration */
- if (msg->cfpollable.data == P80211ENUM_truth_true &&
- msg->cfpollreq.data == P80211ENUM_truth_true ) {
- WLAN_LOG_ERROR("cfpollable=cfpollreq=true is illegal.\n");
- result = -1;
- goto failed;
- }
-
- /* read the PCFInfo and update */
- result = hfa384x_drvr_getconfig(hw, HFA384x_RID_CNFAPPCFINFO,
- pcfinfo, HFA384x_RID_CNFAPPCFINFO_LEN);
- if ( result ) {
- WLAN_LOG_INFO("prism2mgmt_start: read(pcfinfo) failed, "
- "assume it's "
- "not supported, pcf settings ignored.\n");
- goto pcf_skip;
- }
- if ((msg->cfpollable.data == P80211ENUM_truth_false &&
- msg->cfpollreq.data == P80211ENUM_truth_false) ) {
- pcfinfo->MediumOccupancyLimit = 0;
- pcfinfo->CFPPeriod = 0;
- pcfinfo->CFPMaxDuration = 0;
- pcfinfo->CFPFlags &= host2hfa384x_16((UINT16)~BIT0);
-
- if ( msg->cfpperiod.status == P80211ENUM_msgitem_status_data_ok ||
- msg->cfpmaxduration.status == P80211ENUM_msgitem_status_data_ok ) {
- WLAN_LOG_WARNING(
- "Setting cfpperiod or cfpmaxduration when "
- "cfpollable and cfreq are false is pointless.\n");
- }
- }
- if ((msg->cfpollable.data == P80211ENUM_truth_true ||
- msg->cfpollreq.data == P80211ENUM_truth_true) ) {
- if ( msg->cfpollable.data == P80211ENUM_truth_true) {
- pcfinfo->CFPFlags |= host2hfa384x_16((UINT16)BIT0);
- }
-
- if ( msg->cfpperiod.status == P80211ENUM_msgitem_status_data_ok) {
- pcfinfo->CFPPeriod = msg->cfpperiod.data;
- pcfinfo->CFPPeriod = host2hfa384x_16(pcfinfo->CFPPeriod);
- }
-
- if ( msg->cfpmaxduration.status == P80211ENUM_msgitem_status_data_ok) {
- pcfinfo->CFPMaxDuration = msg->cfpmaxduration.data;
- pcfinfo->CFPMaxDuration = host2hfa384x_16(pcfinfo->CFPMaxDuration);
- pcfinfo->MediumOccupancyLimit = pcfinfo->CFPMaxDuration;
- }
- }
- result = hfa384x_drvr_setconfig(hw, HFA384x_RID_CNFAPPCFINFO,
- pcfinfo, HFA384x_RID_CNFAPPCFINFO_LEN);
- if ( result ) {
- WLAN_LOG_ERROR("write(pcfinfo) failed.\n");
- goto failed;
- }
-
-pcf_skip:
- /* Set the macmode so the frame setup code knows what to do */
- if ( msg->bsstype.data == P80211ENUM_bsstype_infrastructure ) {
- wlandev->macmode = WLAN_MACMODE_ESS_AP;
- /* lets extend the data length a bit */
- hfa384x_drvr_setconfig16(hw, HFA384x_RID_CNFMAXDATALEN, 2304);
- }
-
- /* Set the BSSID to the same as our MAC */
- memcpy( wlandev->bssid, wlandev->netdev->dev_addr, WLAN_BSSID_LEN);
-
- /* Enable the Port */
- result = hfa384x_drvr_enable(hw, 0);
- if ( result ) {
- WLAN_LOG_ERROR("Enable macport failed, result=%d.\n", result);
- goto failed;
- }
-
- msg->resultcode.data = P80211ENUM_resultcode_success;
-
- goto done;
-failed:
- WLAN_LOG_DEBUG(1, "Failed to set a config option, result=%d\n", result);
- msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
-
-done:
- result = 0;
-
- DBFEXIT;
- return result;
-}
-
-
-/*----------------------------------------------------------------
-* prism2mgmt_enable
-*
-* Start a BSS. Any station can do this for IBSS, only AP for ESS.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-* interrupt
-----------------------------------------------------------------*/
-int prism2mgmt_enable(wlandevice_t *wlandev, void *msgp)
-{
- int result = 0;
- hfa384x_t *hw = wlandev->priv;
- p80211msg_p2req_enable_t *msg = msgp;
- DBFENTER;
-
- if (!hw->ap) {
-
- /*** STATION ***/
-
- /* Ad-Hoc not quite supported on Prism2 */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- goto done;
- }
-
- /*** ACCESS POINT ***/
-
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
-
- /* Is the tertiary loaded? */
- if ( hw->cap_sup_sta.id != 5) {
- WLAN_LOG_ERROR("AP driver failed to detect AP firmware.\n");
- goto failed;
- }
-
- /* Set the macmode so the frame setup code knows what to do */
- wlandev->macmode = WLAN_MACMODE_ESS_AP;
-
- /* Set the BSSID to the same as our MAC */
- memcpy( wlandev->bssid, wlandev->netdev->dev_addr, WLAN_BSSID_LEN);
-
- /* Enable the Port */
- result = hfa384x_drvr_enable(hw, 0);
- if ( result ) {
- WLAN_LOG_ERROR("Enable macport failed, result=%d.\n", result);
- goto failed;
- }
-
- msg->resultcode.data = P80211ENUM_resultcode_success;
-
- goto done;
-failed:
- msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
-
-done:
- result = 0;
-
- DBFEXIT;
- return result;
-}
-
-
-/*----------------------------------------------------------------
-* prism2mgmt_readpda
-*
-* Collect the PDA data and put it in the message.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-----------------------------------------------------------------*/
-int prism2mgmt_readpda(wlandevice_t *wlandev, void *msgp)
-{
- hfa384x_t *hw = wlandev->priv;
- p80211msg_p2req_readpda_t *msg = msgp;
- int result;
- DBFENTER;
-
- /* We only support collecting the PDA when in the FWLOAD
- * state.
- */
- if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
- WLAN_LOG_ERROR(
- "PDA may only be read "
- "in the fwload state.\n");
- msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- } else {
- /* Call drvr_readpda(), it handles the auxport enable
- * and validating the returned PDA.
- */
- result = hfa384x_drvr_readpda(
- hw,
- msg->pda.data,
- HFA384x_PDA_LEN_MAX);
- if (result) {
- WLAN_LOG_ERROR(
- "hfa384x_drvr_readpda() failed, "
- "result=%d\n",
- result);
-
- msg->resultcode.data =
- P80211ENUM_resultcode_implementation_failure;
- msg->resultcode.status =
- P80211ENUM_msgitem_status_data_ok;
- DBFEXIT;
- return 0;
- }
- msg->pda.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_success;
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- }
-
- DBFEXIT;
- return 0;
-}
-
-/*----------------------------------------------------------------
-* prism2mgmt_readcis
-*
-* Collect the CIS data and put it in the message.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-----------------------------------------------------------------*/
-int prism2mgmt_readcis(wlandevice_t *wlandev, void *msgp)
-{
- int result;
- hfa384x_t *hw = wlandev->priv;
- p80211msg_p2req_readcis_t *msg = msgp;
-
- DBFENTER;
-
- memset(msg->cis.data, 0, sizeof(msg->cis.data));
-
- result = hfa384x_drvr_getconfig(hw, HFA384x_RID_CIS,
- msg->cis.data, HFA384x_RID_CIS_LEN);
- if ( result ) {
- WLAN_LOG_INFO("prism2mgmt_readcis: read(cis) failed.\n");
- msg->cis.status = P80211ENUM_msgitem_status_no_value;
- msg->resultcode.data = P80211ENUM_resultcode_implementation_failure;
-
- }
- else {
- msg->cis.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_success;
- }
-
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
-
- DBFEXIT;
- return 0;
-}
-
-/*----------------------------------------------------------------
-* prism2mgmt_auxport_state
-*
-* Enables/Disables the card's auxiliary port. Should be called
-* before and after a sequence of auxport_read()/auxport_write()
-* calls.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-----------------------------------------------------------------*/
-int prism2mgmt_auxport_state(wlandevice_t *wlandev, void *msgp)
-{
- p80211msg_p2req_auxport_state_t *msg = msgp;
-
-#if (WLAN_HOSTIF != WLAN_USB)
- hfa384x_t *hw = wlandev->priv;
- DBFENTER;
-
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- if (msg->enable.data == P80211ENUM_truth_true) {
- if ( hfa384x_cmd_aux_enable(hw, 0) ) {
- msg->resultcode.data = P80211ENUM_resultcode_implementation_failure;
- } else {
- msg->resultcode.data = P80211ENUM_resultcode_success;
- }
- } else {
- hfa384x_cmd_aux_disable(hw);
- msg->resultcode.data = P80211ENUM_resultcode_success;
- }
-
-#else /* !USB */
- DBFENTER;
-
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
-
-#endif /* WLAN_HOSTIF != WLAN_USB */
-
- DBFEXIT;
- return 0;
-}
-
-
-/*----------------------------------------------------------------
-* prism2mgmt_auxport_read
-*
-* Copies data from the card using the auxport. The auxport must
-* have previously been enabled. Note: this is not the way to
-* do downloads, see the [ram|flash]dl functions.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-----------------------------------------------------------------*/
-int prism2mgmt_auxport_read(wlandevice_t *wlandev, void *msgp)
-{
-#if (WLAN_HOSTIF != WLAN_USB)
- hfa384x_t *hw = wlandev->priv;
- p80211msg_p2req_auxport_read_t *msg = msgp;
- UINT32 addr;
- UINT32 len;
- UINT8* buf;
- UINT32 maxlen = sizeof(msg->data.data);
- DBFENTER;
-
- if ( hw->auxen ) {
- addr = msg->addr.data;
- len = msg->len.data;
- buf = msg->data.data;
- if ( len <= maxlen ) { /* max read/write size */
- hfa384x_copy_from_aux(hw, addr, HFA384x_AUX_CTL_EXTDS, buf, len);
- msg->resultcode.data = P80211ENUM_resultcode_success;
- } else {
- WLAN_LOG_DEBUG(1,"Attempt to read > maxlen from auxport.\n");
- msg->resultcode.data = P80211ENUM_resultcode_refused;
- }
-
- } else {
- msg->resultcode.data = P80211ENUM_resultcode_refused;
- }
- msg->data.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
-
- DBFEXIT;
- return 0;
-#else
- DBFENTER;
-
- WLAN_LOG_ERROR("prism2mgmt_auxport_read: Not supported on USB.\n");
-
- DBFEXIT;
- return 0;
-#endif
-}
-
-
-/*----------------------------------------------------------------
-* prism2mgmt_auxport_write
-*
-* Copies data to the card using the auxport. The auxport must
-* have previously been enabled. Note: this is not the way to
-* do downloads, see the [ram|flash]dl functions.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-----------------------------------------------------------------*/
-int prism2mgmt_auxport_write(wlandevice_t *wlandev, void *msgp)
-{
-#if (WLAN_HOSTIF != WLAN_USB)
- hfa384x_t *hw = wlandev->priv;
- p80211msg_p2req_auxport_write_t *msg = msgp;
- UINT32 addr;
- UINT32 len;
- UINT8* buf;
- UINT32 maxlen = sizeof(msg->data.data);
- DBFENTER;
-
- if ( hw->auxen ) {
- addr = msg->addr.data;
- len = msg->len.data;
- buf = msg->data.data;
- if ( len <= maxlen ) { /* max read/write size */
- hfa384x_copy_to_aux(hw, addr, HFA384x_AUX_CTL_EXTDS, buf, len);
- } else {
- WLAN_LOG_DEBUG(1,"Attempt to write > maxlen from auxport.\n");
- msg->resultcode.data = P80211ENUM_resultcode_refused;
- }
-
- } else {
- msg->resultcode.data = P80211ENUM_resultcode_refused;
- }
- msg->data.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
-
- DBFEXIT;
- return 0;
-#else
- DBFENTER;
- WLAN_LOG_ERROR("prism2mgmt_auxport_read: Not supported on USB.\n");
- DBFEXIT;
- return 0;
-#endif
-}
-
-/*----------------------------------------------------------------
-* prism2mgmt_low_level
-*
-* Puts the card into the desired test mode.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-----------------------------------------------------------------*/
-int prism2mgmt_low_level(wlandevice_t *wlandev, void *msgp)
-{
- hfa384x_t *hw = wlandev->priv;
- p80211msg_p2req_low_level_t *msg = msgp;
- hfa384x_metacmd_t cmd;
- DBFENTER;
-
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
-
- /* call some routine to execute the test command */
- cmd.cmd = (UINT16) msg->command.data;
- cmd.parm0 = (UINT16) msg->param0.data;
- cmd.parm1 = (UINT16) msg->param1.data;
- cmd.parm2 = (UINT16) msg->param2.data;
-
- hfa384x_drvr_low_level(hw,&cmd);
-
- msg->resp0.data = (UINT32) cmd.result.resp0;
- msg->resp1.data = (UINT32) cmd.result.resp1;
- msg->resp2.data = (UINT32) cmd.result.resp2;
-
- msg->resultcode.data = P80211ENUM_resultcode_success;
-
- DBFEXIT;
- return 0;
-}
-
-/*----------------------------------------------------------------
-* prism2mgmt_test_command
-*
-* Puts the card into the desired test mode.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-----------------------------------------------------------------*/
-int prism2mgmt_test_command(wlandevice_t *wlandev, void *msgp)
-{
- hfa384x_t *hw = wlandev->priv;
- p80211msg_p2req_test_command_t *msg = msgp;
- hfa384x_metacmd_t cmd;
-
- DBFENTER;
-
- cmd.cmd = ((UINT16) msg->testcode.data) << 8 | 0x38;
- cmd.parm0 = (UINT16) msg->testparam.data;
- cmd.parm1 = 0;
- cmd.parm2 = 0;
-
- /* call some routine to execute the test command */
-
- hfa384x_drvr_low_level(hw,&cmd);
-
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_success;
-
- msg->status.status = P80211ENUM_msgitem_status_data_ok;
- msg->status.data = cmd.result.status;
- msg->resp0.status = P80211ENUM_msgitem_status_data_ok;
- msg->resp0.data = cmd.result.resp0;
- msg->resp1.status = P80211ENUM_msgitem_status_data_ok;
- msg->resp1.data = cmd.result.resp1;
- msg->resp2.status = P80211ENUM_msgitem_status_data_ok;
- msg->resp2.data = cmd.result.resp2;
-
- DBFEXIT;
- return 0;
-}
-
-
-/*----------------------------------------------------------------
-* prism2mgmt_mmi_read
-*
-* Read from one of the MMI registers.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-----------------------------------------------------------------*/
-int prism2mgmt_mmi_read(wlandevice_t *wlandev, void *msgp)
-{
- hfa384x_t *hw = wlandev->priv;
- p80211msg_p2req_mmi_read_t *msg = msgp;
- UINT32 resp = 0;
-
- DBFENTER;
-
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
-
- /* call some routine to execute the test command */
-
- hfa384x_drvr_mmi_read(hw, msg->addr.data, &resp);
-
- /* I'm not sure if this is "architecturally" correct, but it
- is expedient. */
-
- msg->value.status = P80211ENUM_msgitem_status_data_ok;
- msg->value.data = resp;
- msg->resultcode.data = P80211ENUM_resultcode_success;
-
- DBFEXIT;
- return 0;
-}
-
-/*----------------------------------------------------------------
-* prism2mgmt_mmi_write
-*
-* Write a data value to one of the MMI registers.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-----------------------------------------------------------------*/
-int prism2mgmt_mmi_write(wlandevice_t *wlandev, void *msgp)
-{
- hfa384x_t *hw = wlandev->priv;
- p80211msg_p2req_mmi_write_t *msg = msgp;
- DBFENTER;
-
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
-
- /* call some routine to execute the test command */
-
- hfa384x_drvr_mmi_write(hw, msg->addr.data, msg->data.data);
-
- msg->resultcode.data = P80211ENUM_resultcode_success;
+ msg->pda.status = P80211ENUM_msgitem_status_data_ok;
+ msg->resultcode.data = P80211ENUM_resultcode_success;
+ msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
+ }
DBFEXIT;
return 0;
{
hfa384x_t *hw = wlandev->priv;
p80211msg_p2req_ramdl_write_t *msg = msgp;
- UINT32 addr;
- UINT32 len;
- UINT8 *buf;
+ u32 addr;
+ u32 len;
+ u8 *buf;
DBFENTER;
if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
{
hfa384x_t *hw = wlandev->priv;
p80211msg_p2req_flashdl_write_t *msg = msgp;
- UINT32 addr;
- UINT32 len;
- UINT8 *buf;
+ u32 addr;
+ u32 len;
+ u8 *buf;
DBFENTER;
if (wlandev->msdstate != WLAN_MSD_FWLOAD) {
return 0;
}
-
-/*----------------------------------------------------------------
-* prism2mgmt_dump_state
-*
-* Dumps the driver's and hardware's current state via the kernel
-* log at KERN_NOTICE level.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-----------------------------------------------------------------*/
-int prism2mgmt_dump_state(wlandevice_t *wlandev, void *msgp)
-{
- p80211msg_p2req_dump_state_t *msg = msgp;
- int result = 0;
-
-#if (WLAN_HOSTIF != WLAN_USB)
- hfa384x_t *hw = wlandev->priv;
- UINT16 auxbuf[15];
- DBFENTER;
-
- WLAN_LOG_NOTICE("prism2 driver and hardware state:\n");
- if ( (result = hfa384x_cmd_aux_enable(hw, 0)) ) {
- WLAN_LOG_ERROR("aux_enable failed, result=%d\n", result);
- goto failed;
- }
- hfa384x_copy_from_aux(hw,
- 0x01e2,
- HFA384x_AUX_CTL_EXTDS,
- auxbuf,
- sizeof(auxbuf));
- hfa384x_cmd_aux_disable(hw);
- WLAN_LOG_NOTICE(" cmac: FreeBlocks=%d\n", auxbuf[5]);
- WLAN_LOG_NOTICE(" cmac: IntEn=0x%02x EvStat=0x%02x\n",
- hfa384x_getreg(hw, HFA384x_INTEN),
- hfa384x_getreg(hw, HFA384x_EVSTAT));
-
- #ifdef USE_FID_STACK
- WLAN_LOG_NOTICE(" drvr: txfid_top=%d stacksize=%d\n",
- hw->txfid_top,HFA384x_DRVR_FIDSTACKLEN_MAX);
- #else
- WLAN_LOG_NOTICE(" drvr: txfid_head=%d txfid_tail=%d txfid_N=%d\n",
- hw->txfid_head, hw->txfid_tail, hw->txfid_N);
- #endif
-
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_success;
-
-#else /* (WLAN_HOSTIF == WLAN_USB) */
-
- DBFENTER;
-
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- goto failed;
-
-#endif /* (WLAN_HOSTIF != WLAN_USB) */
-
-failed:
- DBFEXIT;
- return result;
-}
-
-/*----------------------------------------------------------------
-* prism2mgmt_channel_info
-*
-* Issues a ChannelInfoRequest.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-----------------------------------------------------------------*/
-int prism2mgmt_channel_info(wlandevice_t *wlandev, void *msgp)
-{
- p80211msg_p2req_channel_info_t *msg=msgp;
- hfa384x_t *hw = wlandev->priv;
- int result, i, n=0;
- UINT16 channel_mask=0;
- hfa384x_ChannelInfoRequest_data_t chinforeq;
- // unsigned long now;
-
- DBFENTER;
-
- if (!hw->ap) {
-
- /*** STATION ***/
-
- /* Not supported in STA f/w */
- P80211_SET_INT(msg->resultcode, P80211ENUM_resultcode_not_supported);
- goto done;
- }
-
- /*** ACCESS POINT ***/
-
-#define CHINFO_TIMEOUT 2
-
- P80211_SET_INT(msg->resultcode, P80211ENUM_resultcode_success);
-
- /* setting default value for channellist = all channels */
- if (!msg->channellist.data) {
- P80211_SET_INT(msg->channellist, 0x00007FFE);
- }
- /* setting default value for channeldwelltime = 100 ms */
- if (!msg->channeldwelltime.data) {
- P80211_SET_INT(msg->channeldwelltime, 100);
- }
- channel_mask = (UINT16) (msg->channellist.data >> 1);
- for (i=0, n=0; i < 14; i++) {
- if (channel_mask & (1<<i)) {
- n++;
- }
- }
- P80211_SET_INT(msg->numchinfo, n);
- chinforeq.channelList = host2hfa384x_16(channel_mask);
- chinforeq.channelDwellTime = host2hfa384x_16(msg->channeldwelltime.data);
-
- atomic_set(&hw->channel_info.done, 1);
-
- result = hfa384x_drvr_setconfig( hw, HFA384x_RID_CHANNELINFOREQUEST,
- &chinforeq, HFA384x_RID_CHANNELINFOREQUEST_LEN);
- if ( result ) {
- WLAN_LOG_ERROR("setconfig(CHANNELINFOREQUEST) failed. result=%d\n",
- result);
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- goto done;
- }
- /*
- now = jiffies;
- while (atomic_read(&hw->channel_info.done) != 1) {
- if ((jiffies - now) > CHINFO_TIMEOUT*HZ) {
- WLAN_LOG_NOTICE("ChannelInfo results not received in %d seconds, aborting.\n",
- CHINFO_TIMEOUT);
- msg->resultcode.data = P80211ENUM_resultcode_timeout;
- goto done;
- }
- current->state = TASK_INTERRUPTIBLE;
- schedule_timeout(HZ/4);
- current->state = TASK_RUNNING;
- }
- */
-
-done:
-
- DBFEXIT;
- return 0;
-}
-
-/*----------------------------------------------------------------
-* prism2mgmt_channel_info_results
-*
-* Returns required ChannelInfo result.
-*
-* Arguments:
-* wlandev wlan device structure
-* msgp ptr to msg buffer
-*
-* Returns:
-* 0 success and done
-* <0 success, but we're waiting for something to finish.
-* >0 an error occurred while handling the message.
-* Side effects:
-*
-* Call context:
-* process thread (usually)
-----------------------------------------------------------------*/
-int prism2mgmt_channel_info_results(wlandevice_t *wlandev, void *msgp)
-{
- hfa384x_t *hw = wlandev->priv;
-
- p80211msg_p2req_channel_info_results_t *msg=msgp;
- int result=0;
- int channel;
-
- DBFENTER;
-
- if (!hw->ap) {
-
- /*** STATION ***/
-
- /* Not supported in STA f/w */
- P80211_SET_INT(msg->resultcode, P80211ENUM_resultcode_not_supported);
- goto done;
- }
-
- /*** ACCESS POINT ***/
-
- switch (atomic_read(&hw->channel_info.done)) {
- case 0: msg->resultcode.status = P80211ENUM_msgitem_status_no_value;
- goto done;
- case 1: msg->resultcode.status = P80211ENUM_msgitem_status_incomplete_itemdata;
- goto done;
- }
-
- P80211_SET_INT(msg->resultcode, P80211ENUM_resultcode_success);
- channel=msg->channel.data-1;
-
- if (channel < 0 || ! (hw->channel_info.results.scanchannels & 1<<channel) ) {
- msg->resultcode.data = P80211ENUM_resultcode_invalid_parameters;
- goto done;
- }
- WLAN_LOG_DEBUG(2, "chinfo_results: channel %d, avg/peak level=%d/%d dB, active=%d\n",
- channel+1,
- hw->channel_info.results.result[channel].anl,
- hw->channel_info.results.result[channel].pnl,
- hw->channel_info.results.result[channel].active
- );
- P80211_SET_INT(msg->avgnoiselevel, hw->channel_info.results.result[channel].anl);
- P80211_SET_INT(msg->peaknoiselevel, hw->channel_info.results.result[channel].pnl);
- P80211_SET_INT(msg->bssactive, hw->channel_info.results.result[channel].active &
- HFA384x_CHINFORESULT_BSSACTIVE
- ? P80211ENUM_truth_true
- : P80211ENUM_truth_false) ;
- P80211_SET_INT(msg->pcfactive, hw->channel_info.results.result[channel].active &
- HFA384x_CHINFORESULT_PCFACTIVE
- ? P80211ENUM_truth_true
- : P80211ENUM_truth_false) ;
-
-done:
- DBFEXIT;
- return result;
-}
-
-
/*----------------------------------------------------------------
* prism2mgmt_autojoin
*
{
hfa384x_t *hw = wlandev->priv;
int result = 0;
- UINT16 reg;
- UINT16 port_type;
+ u16 reg;
+ u16 port_type;
p80211msg_lnxreq_autojoin_t *msg = msgp;
p80211pstrd_t *pstr;
- UINT8 bytebuf[256];
+ u8 bytebuf[256];
hfa384x_bytestr_t *p2bytestr = (hfa384x_bytestr_t*)bytebuf;
DBFENTER;
/* Set the SSID */
memcpy(&wlandev->ssid, &msg->ssid.data, sizeof(msg->ssid.data));
- if (hw->ap) {
-
- /*** ACCESS POINT ***/
-
- /* Never supported on AP */
- msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
- msg->resultcode.data = P80211ENUM_resultcode_not_supported;
- goto done;
- }
-
/* Disable the Port */
hfa384x_drvr_disable(hw, 0);
msg->resultcode.status = P80211ENUM_msgitem_status_data_ok;
msg->resultcode.data = P80211ENUM_resultcode_success;
-done:
DBFEXIT;
return result;
}
p80211msg_lnxreq_wlansniff_t *msg = msgp;
hfa384x_t *hw = wlandev->priv;
- UINT16 word;
+ u16 word;
DBFENTER;
projects / linux-2.6-omap-h63xx.git / blobdiff