{
/* stop khubd and related activity */
hub->quiescing = 1;
+ hub->activating = 0;
usb_kill_urb(hub->urb);
if (hub->has_indicators)
cancel_delayed_work(&hub->leds);
spin_lock_irqsave(&device_state_lock, flags);
if (udev->state == USB_STATE_NOTATTACHED)
; /* do nothing */
- else if (new_state != USB_STATE_NOTATTACHED)
+ else if (new_state != USB_STATE_NOTATTACHED) {
udev->state = new_state;
- else
+ if (new_state == USB_STATE_CONFIGURED)
+ device_init_wakeup(&udev->dev,
+ (udev->actconfig->desc.bmAttributes
+ & USB_CONFIG_ATT_WAKEUP));
+ else if (new_state != USB_STATE_SUSPENDED)
+ device_init_wakeup(&udev->dev, 0);
+ } else
recursively_mark_NOTATTACHED(udev);
spin_unlock_irqrestore(&device_state_lock, flags);
}
* (Includes HNP test device.)
*/
if (udev->bus->b_hnp_enable || udev->bus->is_b_host) {
- static int __usb_suspend_device (struct usb_device *,
- int port1, pm_message_t state);
- err = __usb_suspend_device(udev,
- udev->bus->otg_port,
- PMSG_SUSPEND);
+ static int __usb_suspend_device(struct usb_device *,
+ int port1);
+ err = __usb_suspend_device(udev, udev->bus->otg_port);
if (err < 0)
dev_dbg(&udev->dev, "HNP fail, %d\n", err);
}
/* FIXME let caller ask to power down the port:
* - some devices won't enumerate without a VBUS power cycle
* - SRP saves power that way
- * - usb_suspend_device(dev, PMSG_SUSPEND)
+ * - ... new call, TBD ...
* That's easy if this hub can switch power per-port, and
* khubd reactivates the port later (timer, SRP, etc).
* Powerdown must be optional, because of reset/DFU.
* NOTE: OTG devices may issue remote wakeup (or SRP) even when
* we don't explicitly enable it here.
*/
- if (udev->actconfig
- // && FIXME (remote wakeup enabled on this bus)
- // ... currently assuming it's always appropriate
- && (udev->actconfig->desc.bmAttributes
- & USB_CONFIG_ATT_WAKEUP) != 0) {
+ if (device_may_wakeup(&udev->dev)) {
status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
USB_REQ_SET_FEATURE, USB_RECIP_DEVICE,
USB_DEVICE_REMOTE_WAKEUP, 0,
* Other than re-initializing the hub (plug/unplug, except for root hubs),
* Linux (2.6) currently has NO mechanisms to initiate that: no khubd
* timer, no SRP, no requests through sysfs.
+ *
+ * If CONFIG_USB_SUSPEND isn't enabled, devices only really suspend when
+ * the root hub for their bus goes into global suspend ... so we don't
+ * (falsely) update the device power state to say it suspended.
*/
-static int __usb_suspend_device (struct usb_device *udev, int port1,
- pm_message_t state)
+static int __usb_suspend_device (struct usb_device *udev, int port1)
{
int status;
return 0;
}
- /* suspend interface drivers; if this is a hub, it
- * suspends the child devices
- */
+ /* all interfaces must already be suspended */
if (udev->actconfig) {
int i;
for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
struct usb_interface *intf;
- struct usb_driver *driver;
intf = udev->actconfig->interface[i];
- if (state.event <= intf->dev.power.power_state.event)
- continue;
- if (!intf->dev.driver)
- continue;
- driver = to_usb_driver(intf->dev.driver);
-
- if (driver->suspend) {
- status = driver->suspend(intf, state);
- if (intf->dev.power.power_state.event != state.event
- || status)
- dev_err(&intf->dev,
- "suspend %d fail, code %d\n",
- state.event, status);
- }
-
- /* only drivers with suspend() can ever resume();
- * and after power loss, even they won't.
- * bus_rescan_devices() can rebind drivers later.
- *
- * FIXME the PM core self-deadlocks when unbinding
- * drivers during suspend/resume ... everything grabs
- * dpm_sem (not a spinlock, ugh). we want to unbind,
- * since we know every driver's probe/disconnect works
- * even for drivers that can't suspend.
- */
- if (!driver->suspend || state.event > PM_EVENT_FREEZE) {
-#if 1
- dev_warn(&intf->dev, "resume is unsafe!\n");
-#else
- down_write(&usb_bus_type.rwsem);
- device_release_driver(&intf->dev);
- up_write(&usb_bus_type.rwsem);
-#endif
+ if (is_active(intf)) {
+ dev_dbg(&intf->dev, "nyet suspended\n");
+ return -EBUSY;
}
}
}
- /*
- * FIXME this needs port power off call paths too, to help force
- * USB into the "generic" PM model. At least for devices on
- * ports that aren't using ganged switching (usually root hubs).
- *
- * NOTE: SRP-capable links should adopt more aggressive poweroff
- * policies (when HNP doesn't apply) once we have mechanisms to
- * turn power back on! (Likely not before 2.7...)
- */
- if (state.event > PM_EVENT_FREEZE) {
- dev_warn(&udev->dev, "no poweroff yet, suspending instead\n");
- }
-
/* "global suspend" of the HC-to-USB interface (root hub), or
* "selective suspend" of just one hub-device link.
*/
udev);
if (status == 0)
- udev->dev.power.power_state = state;
+ udev->dev.power.power_state = PMSG_SUSPEND;
return status;
}
/**
* usb_suspend_device - suspend a usb device
* @udev: device that's no longer in active use
- * @state: PMSG_SUSPEND to suspend
* Context: must be able to sleep; device not locked
*
* Suspends a USB device that isn't in active use, conserving power.
* suspend by the host, using usb_resume_device(). It's also routine
* to disconnect devices while they are suspended.
*
+ * This only affects the USB hardware for a device; its interfaces
+ * (and, for hubs, child devices) must already have been suspended.
+ *
* Suspending OTG devices may trigger HNP, if that's been enabled
* between a pair of dual-role devices. That will change roles, such
* as from A-Host to A-Peripheral or from B-Host back to B-Peripheral.
*
* Returns 0 on success, else negative errno.
*/
-int usb_suspend_device(struct usb_device *udev, pm_message_t state)
+int usb_suspend_device(struct usb_device *udev)
{
int port1, status;
if (port1 < 0)
return port1;
- status = __usb_suspend_device(udev, port1, state);
+ status = __usb_suspend_device(udev, port1);
usb_unlock_device(udev);
return status;
}
/*
+ * If the USB "suspend" state is in use (rather than "global suspend"),
+ * many devices will be individually taken out of suspend state using
+ * special" resume" signaling. These routines kick in shortly after
* hardware resume signaling is finished, either because of selective
* resume (by host) or remote wakeup (by device) ... now see what changed
* in the tree that's rooted at this device.
status);
else if (udev->actconfig) {
unsigned i;
+ int (*resume)(struct device *);
le16_to_cpus(&devstatus);
if (devstatus & (1 << USB_DEVICE_REMOTE_WAKEUP)) {
}
/* resume interface drivers; if this is a hub, it
- * resumes the child devices
+ * may have a child resume event to deal with soon
*/
- for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) {
- struct usb_interface *intf;
- struct usb_driver *driver;
-
- intf = udev->actconfig->interface[i];
- if (intf->dev.power.power_state.event == PM_EVENT_ON)
- continue;
- if (!intf->dev.driver) {
- /* FIXME maybe force to alt 0 */
- continue;
- }
- driver = to_usb_driver(intf->dev.driver);
-
- /* bus_rescan_devices() may rebind drivers */
- if (!driver->resume)
- continue;
-
- /* can we do better than just logging errors? */
- status = driver->resume(intf);
- if (intf->dev.power.power_state.event != PM_EVENT_ON
- || status)
- dev_dbg(&intf->dev,
- "resume fail, state %d code %d\n",
- intf->dev.power.power_state.event, status);
- }
+ resume = udev->dev.bus->resume;
+ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++)
+ (void) resume(&udev->actconfig->interface[i]->dev);
status = 0;
} else if (udev->devnum <= 0) {
return status;
}
-static int hub_suspend(struct usb_interface *intf, pm_message_t state)
+static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
{
struct usb_hub *hub = usb_get_intfdata (intf);
struct usb_device *hdev = hub->hdev;
unsigned port1;
- int status;
- /* stop khubd and related activity */
- hub_quiesce(hub);
-
- /* then suspend every port */
+ /* fail if children aren't already suspended */
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
struct usb_device *udev;
udev = hdev->children [port1-1];
- if (!udev)
- continue;
- down(&udev->serialize);
- status = __usb_suspend_device(udev, port1, state);
- up(&udev->serialize);
- if (status < 0)
- dev_dbg(&intf->dev, "suspend port %d --> %d\n",
- port1, status);
+ if (udev && udev->state != USB_STATE_SUSPENDED) {
+ dev_dbg(&intf->dev, "port %d nyet suspended\n", port1);
+ return -EBUSY;
+ }
}
- intf->dev.power.power_state = state;
+ /* stop khubd and related activity */
+ hub_quiesce(hub);
return 0;
}
unsigned port1;
int status;
- if (intf->dev.power.power_state.event == PM_EVENT_ON)
- return 0;
-
for (port1 = 1; port1 <= hdev->maxchild; port1++) {
struct usb_device *udev;
u16 portstat, portchange;
}
up(&udev->serialize);
}
- intf->dev.power.power_state = PMSG_ON;
-
hub->resume_root_hub = 0;
hub_activate(hub);
return 0;
#else /* !CONFIG_USB_SUSPEND */
-int usb_suspend_device(struct usb_device *udev, pm_message_t state)
+int usb_suspend_device(struct usb_device *udev)
{
+ /* state does NOT lie by saying it's USB_STATE_SUSPENDED! */
return 0;
}
int usb_resume_device(struct usb_device *udev)
{
+ udev->dev.power.power_state.event = PM_EVENT_ON;
return 0;
}
projects / linux-2.6-omap-h63xx.git / blobdiff