[ARM] 3239/1: Add ARM optimised swab32

[linux-2.6-omap-h63xx.git] / include / asm-arm / arch-ixp2000 / ixp2000-regs.h

diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
index def089d693d2534bbee460abe0ac3275b9a9c53e..8cf70ff160afb42b0d0a9e4415bb4d7d386d2238 100644 (file)
--- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h
+++ b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
@@ -59,14 +59,15 @@
 #define        IXP2000_CAP_SIZE                0x00100000
 
 /*
- * Addresses for specific on-chip peripherals
+ * Addresses for specific on-chip peripherals.
  */
 #define        IXP2000_SLOWPORT_CSR_VIRT_BASE  0xfef80000
 #define        IXP2000_GLOBAL_REG_VIRT_BASE    0xfef04000
 #define        IXP2000_UART_PHYS_BASE          0xc0030000
 #define        IXP2000_UART_VIRT_BASE          0xfef30000
 #define        IXP2000_TIMER_VIRT_BASE         0xfef20000
-#define        IXP2000_GPIO_VIRT_BASE          0Xfef10000
+#define        IXP2000_UENGINE_CSR_VIRT_BASE   0xfef18000
+#define        IXP2000_GPIO_VIRT_BASE          0xfef10000
 
 /*
  * Devices outside of the 0xc0000000 -> 0xc0100000 range.  The virtual
@@ -155,6 +156,14 @@
 #define IXP2000_IRQ_THD_RAW_STATUS_B_1 IXP2000_INTCTL_REG(0x84)
 #define IXP2000_IRQ_THD_RAW_STATUS_B_2 IXP2000_INTCTL_REG(0x88)
 #define IXP2000_IRQ_THD_RAW_STATUS_B_3 IXP2000_INTCTL_REG(0x8c)
+#define IXP2000_IRQ_THD_STATUS_A_0     IXP2000_INTCTL_REG(0xe0)
+#define IXP2000_IRQ_THD_STATUS_A_1     IXP2000_INTCTL_REG(0xe4)
+#define IXP2000_IRQ_THD_STATUS_A_2     IXP2000_INTCTL_REG(0xe8)
+#define IXP2000_IRQ_THD_STATUS_A_3     IXP2000_INTCTL_REG(0xec)
+#define IXP2000_IRQ_THD_STATUS_B_0     IXP2000_INTCTL_REG(0x100)
+#define IXP2000_IRQ_THD_STATUS_B_1     IXP2000_INTCTL_REG(0x104)
+#define IXP2000_IRQ_THD_STATUS_B_2     IXP2000_INTCTL_REG(0x108)
+#define IXP2000_IRQ_THD_STATUS_B_3     IXP2000_INTCTL_REG(0x10c)
 #define IXP2000_IRQ_THD_ENABLE_SET_A_0 IXP2000_INTCTL_REG(0x160)
 #define IXP2000_IRQ_THD_ENABLE_SET_A_1 IXP2000_INTCTL_REG(0x164)
 #define IXP2000_IRQ_THD_ENABLE_SET_A_2 IXP2000_INTCTL_REG(0x168)
@@ -252,7 +261,7 @@
 #define IXP2000_PCI_XSCALE_INT_ENABLE  IXP2000_PCI_CSR(0x15C)
 
 #define IXP2000_PCICNTL_PNR            (1<<17) /* PCI not Reset bit of PCI_CONTROL */
-#define IXP2000_PCICNTL_PCF            (1<<28) /* PCI Centrolfunction bit */
+#define IXP2000_PCICNTL_PCF            (1<<28) /* PCI Central function bit */
 #define IXP2000_XSCALE_INT             (1<<1)  /* Interrupt from XScale to PCI */
 
 /* These are from the IRQ register in the PCI ISR register */